diff options
| author | Eric Lai <eric_lai@quanta.corp-partner.google.com> | 2022-03-09 13:43:31 +0800 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2022-03-14 15:46:24 +0000 |
| commit | 232dcb938a08179291b1ff60b65e8244b4fc4827 (patch) | |
| tree | 8c33988c643b88001b7db2b17da3583cf24fcf56 /src/mainboard | |
| parent | 25c717d66458249de2546fda9e5b69a2df41e6af (diff) | |
mb/google/nissa/var/nivviks: Enable pen garage
Enable pen garage. Pen detect is active low. And wake system when
eject.
BUG=b:223476974
TEST=evtest work as expected.
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 15 (SW_PEN_INSERTED) state 0
Properties:
Testing ... (interrupt to exit)
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: -------------- SYN_REPORT ------------
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I2f676301c3372a4760853ce9c10b75f94e22bbcd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/google/brya/Kconfig.name | 1 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/baseboard/nissa/gpio.c | 2 | ||||
| -rw-r--r-- | src/mainboard/google/brya/variants/nivviks/overridetree.cb | 12 |
3 files changed, 14 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index 3895aab47b..186ca6f6d1 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -83,6 +83,7 @@ config BOARD_GOOGLE_KANO config BOARD_GOOGLE_NIVVIKS bool "-> Nivviks" select BOARD_GOOGLE_BASEBOARD_NISSA + select DRIVERS_GENERIC_GPIO_KEYS select DRIVERS_INTEL_MIPI_CAMERA select HAVE_WWAN_POWER_SEQUENCE diff --git a/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c b/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c index 8a3ea0ee62..60b00182c2 100644 --- a/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c +++ b/src/mainboard/google/brya/variants/baseboard/nissa/gpio.c @@ -238,7 +238,7 @@ static const struct pad_config gpio_table[] = { /* F14 : GSXDIN ==> TCHPAD_INT_ODL */ PAD_CFG_GPI_IRQ_WAKE(GPP_F14, NONE, PLTRST, LEVEL, INVERT), /* F15 : GSXSRESET# ==> SOC_PEN_DETECT_ODL */ - PAD_CFG_GPI_SCI(GPP_F15, NONE, DEEP, EDGE_SINGLE, NONE), + PAD_CFG_GPI_SCI_HIGH(GPP_F15, NONE, DEEP, EDGE_SINGLE), /* F16 : NC */ PAD_NC(GPP_F16, NONE), /* F17 : THC1_SPI2_RST# ==> EC_SOC_WAKE_ODL */ diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb index 8ccbac7156..d5d062103c 100644 --- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb +++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb @@ -47,6 +47,18 @@ chip soc/intel/alderlake register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)" + register "key.wake_gpe" = "GPE0_DW2_15" + register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on end + end end device ref i2c2 on chip drivers/i2c/sx9324 |