google/rush_ryu: dsi: Enable panel related vdd and clocks

BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu

Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>

Change-Id: Ia10bf7ae3bde389e883970f9a6ee931c32b8172b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26902364b6a453adb850abfb0c4ce9686e99b5d
Original-Change-Id: I68b92608098959cca14324bfc7e1e58389205989
Original-Reviewed-on: https://chromium-review.googlesource.com/226905
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9514
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

3 files changed, 112 insertions, 9 deletions

diff --git a/src/mainboard/google/rush_ryu/Makefile.inc b/src/mainboard/google/rush_ryu/Makefile.inc
index 3b71c79ef9..3a6090d542 100644
--- a/src/mainboard/google/rush_ryu/Makefile.inc
+++ b/src/mainboard/google/rush_ryu/Makefile.inc
@@ -45,6 +45,7 @@ ramstage-y += boardid.c
 ramstage-y += mainboard.c
 ramstage-y += reset.c
 ramstage-y += chromeos.c
+ramstage-y += pmic.c
 
 bootblock-y += memlayout.ld
 romstage-y += memlayout.ld
diff --git a/src/mainboard/google/rush_ryu/gpio.h b/src/mainboard/google/rush_ryu/gpio.h
index 89f32801f0..a813d42332 100644
--- a/src/mainboard/google/rush_ryu/gpio.h
+++ b/src/mainboard/google/rush_ryu/gpio.h
@@ -62,6 +62,12 @@ enum {
 	BTN_AP_PWR	= GPIO(Q0),
 	POWER_BUTTON	= BTN_AP_PWR,
 	POWER_BUTTON_INDEX = GPIO_Q0_INDEX,
+
+	/* Panel related GPIOs */
+	LCD_EN		= GPIO(H5),
+	LCD_RST_L	= GPIO(H3),
+	EN_VDD18_LCD	= GPIO(X0),
+	EN_VDD_LCD	= GPIO(BB6),	/* P1/P3 board */
 };
 
 #endif /* __MAINBOARD_GOOGLE_RUSH_RYU_GPIO_H__ */
diff --git a/src/mainboard/google/rush_ryu/mainboard.c b/src/mainboard/google/rush_ryu/mainboard.c
index 9ad7f778c8..2b71c98038 100644
--- a/src/mainboard/google/rush_ryu/mainboard.c
+++ b/src/mainboard/google/rush_ryu/mainboard.c
@@ -21,6 +21,7 @@
 #include <boardid.h>
 #include <boot/coreboot_tables.h>
 #include <cbmem.h>
+#include <delay.h>
 #include <device/device.h>
 #include <elog.h>
 #include <memrange.h>
@@ -38,6 +39,7 @@
 #endif
 
 #include "gpio.h"
+#include "pmic.h"
 
 static const struct pad_config mmcpads[] = {
 	/* MMC4 (eMMC) */
@@ -88,18 +90,105 @@ static void fix_ec_sw_sync(void)
 #endif
 }
 
-static void mainboard_init(device_t dev)
+static const struct pad_config lcd_gpio_padcfgs[] = {
+	/* LCD_EN */
+	PAD_CFG_GPIO_OUT0(GPIO_PH5, PINMUX_PULL_UP),
+	/* LCD_RST_L */
+	PAD_CFG_GPIO_OUT0(GPIO_PH3, PINMUX_PULL_UP),
+	/* EN_VDD_LCD */
+	PAD_CFG_GPIO_OUT0(GPIO_PBB6, PINMUX_PULL_NONE),
+	/* EN_VDD18_LCD */
+	PAD_CFG_GPIO_OUT0(DVFS_PWM, PINMUX_PULL_DOWN),
+};
+
+static void configure_display_clocks(void)
 {
-	/* PLLD should be 2 * pixel clock (301620khz). */
-	const uint32_t req_disp_clk =  301620 * 1000 * 2;
-	uint32_t disp_clk;
+	u32 lclks = CLK_L_HOST1X | CLK_L_DISP1;	/* dc */
+	u32 hclks = CLK_H_MIPI_CAL | CLK_H_DSI; /* mipi phy, mipi-dsi a */
+	u32 uclks = CLK_U_DSIB;			/* mipi-dsi b */
+	u32 xclks = CLK_X_CLK72MHZ;		/* clk src of mipi_cal */
 
-	soc_configure_funits(funits, ARRAY_SIZE(funits));
-	disp_clk = clock_display(req_disp_clk);
+	clock_enable_clear_reset(lclks, hclks, uclks, 0, 0, xclks);
+
+	/* Give clocks time to stabilize. */
+	udelay(IO_STABILIZATION_DELAY);
+}
+
+static int enable_lcd_vdd(void)
+{
+	uint8_t data;
+
+	/* Set 1.20V to power AVDD_DSI_CSI */
+	pmic_write_reg(I2CPWR_BUS, TI65913_LDO5_VOLTAGE,
+			VSEL_1200, 1);
+	pmic_write_reg(I2CPWR_BUS, TI65913_LDO5_CTRL,
+			TI65913_MODE_ACTIVE_ON, 1);
+	/* wait for 100ms */
+	mdelay(100);
+
+	/*
+	 * Enable VDD_LCD
+	 *
+	 * Use different GPIO based on board id
+	 */
+	switch (board_id()) {
+	case BOARD_ID_PROTO_0:
+		/* Select PMIC GPIO_6's primary function */
+		pmic_read_reg(I2CPWR_BUS, TI65913_PAD2, &data);
+		pmic_write_reg(I2CPWR_BUS, TI65913_PAD2,
+				 PAD2_GPIO_6_PRIMARY(data), 0);
+
+		/* Set PMIC_GPIO_6 as output */
+		pmic_read_reg(I2CPWR_BUS, TI65913_GPIO_DATA_DIR, &data);
+		pmic_write_reg(I2CPWR_BUS, TI65913_GPIO_DATA_DIR,
+				TI65913_GPIO_6_OUTPUT, 0);
+
+		/* Set PMIC_GPIO_6 output high */
+		pmic_read_reg(I2CPWR_BUS, TI65913_GPIO_DATA_OUT, &data);
+		pmic_write_reg(I2CPWR_BUS, TI65913_GPIO_DATA_OUT,
+				TI65913_GPIO_6_HIGH, 1);
+		break;
+	case BOARD_ID_PROTO_1:
+	case BOARD_ID_PROTO_3:
+		gpio_set(EN_VDD_LCD, 1);
+		break;
+	default: /* unknown board */
+		return -1;
+	}
+	/* wait for 2ms */
+	mdelay(2);
+
+	/* Enable PP1800_LCDIO to panel */
+	gpio_set(EN_VDD18_LCD, 1);
+	/* wait for 1ms */
+	mdelay(1);
+
+	/* Set panel EN and RST signals */
+	gpio_set(LCD_EN, 1);		/* enable */
+	/* wait for min 10ms */
+	mdelay(10);
+	gpio_set(LCD_RST_L, 1);		/* clear reset */
+	/* wait for min 3ms */
+	mdelay(3);
+
+	return 0;
+}
 
-	if (disp_clk != req_disp_clk)
-		printk(BIOS_DEBUG, "display clock: %u vs %u (r)\n", disp_clk,
-			req_disp_clk);
+static int configure_display_blocks(void)
+{
+	/* set and enable panel related vdd */
+	if (enable_lcd_vdd())
+		return -1;
+
+	/* enable display related clocks */
+	configure_display_clocks();
+
+	return 0;
+}
+
+static void mainboard_init(device_t dev)
+{
+	soc_configure_funits(funits, ARRAY_SIZE(funits));
 
 	/* I2C6 bus (audio, etc.) */
 	soc_configure_i2c6pad();
@@ -108,6 +197,13 @@ static void mainboard_init(device_t dev)
 	elog_add_boot_reason();
 
 	fix_ec_sw_sync();
+
+	/* configure panel gpio pads */
+	soc_configure_pads(lcd_gpio_padcfgs, ARRAY_SIZE(lcd_gpio_padcfgs));
+
+	/* if panel needs to bringup */
+	if (!vboot_skip_display_init())
+		configure_display_blocks();
 }
 
 static void mainboard_enable(device_t dev)