summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorTimothy Pearson <tpearson@raptorengineeringinc.com>2015-09-05 19:37:57 -0500
committerStefan Reinauer <stefan.reinauer@coreboot.org>2015-11-09 20:24:42 +0100
commite619a9ac9b4933332fbb0e7cdc9b536e0dc62188 (patch)
treeff8203bc9921e108ff363686cfa7308ca091dde2 /src/mainboard
parent3ff36b05cd100c178552971cc0c0bfdd0970a8fe (diff)
mainboard/asus/kgpe-d16: Add initial Family 15h CPU support
Change-Id: I76f74ed4ae383f8b1f57eaaa2e025035002430f2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11967 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/asus/kgpe-d16/cmos.default3
-rw-r--r--src/mainboard/asus/kgpe-d16/cmos.layout15
-rw-r--r--src/mainboard/asus/kgpe-d16/devicetree.cb4
-rw-r--r--src/mainboard/asus/kgpe-d16/resourcemap.c276
-rw-r--r--src/mainboard/asus/kgpe-d16/romstage.c36
5 files changed, 309 insertions, 25 deletions
diff --git a/src/mainboard/asus/kgpe-d16/cmos.default b/src/mainboard/asus/kgpe-d16/cmos.default
index d84c4027d6..e3b3c7b570 100644
--- a/src/mainboard/asus/kgpe-d16/cmos.default
+++ b/src/mainboard/asus/kgpe-d16/cmos.default
@@ -2,13 +2,14 @@ baud_rate = 115200
debug_level = Spew
multi_core = Enable
slow_cpu = off
+compute_unit_siblings = Enable
iommu = Disable
nmi = Disable
hypertransport_speed_limit = Auto
max_mem_clock = DDR3-1600
minimum_memory_voltage = 1.5V
ECC_memory = Enable
-ECC_redirection = Disable
+ECC_redirection = Enable
ecc_scrub_rate = 1.28us
interleave_chip_selects = Enable
interleave_nodes = Disable
diff --git a/src/mainboard/asus/kgpe-d16/cmos.layout b/src/mainboard/asus/kgpe-d16/cmos.layout
index fbda5e0df1..264c893a76 100644
--- a/src/mainboard/asus/kgpe-d16/cmos.layout
+++ b/src/mainboard/asus/kgpe-d16/cmos.layout
@@ -26,8 +26,8 @@ entries
401 1 e 1 interleave_chip_selects
402 1 e 1 interleave_nodes
403 1 e 1 interleave_memory_channels
-404 2 e 8 max_mem_clock
-406 1 e 2 multi_core
+404 4 e 8 max_mem_clock
+408 1 e 2 multi_core
412 4 e 6 debug_level
440 4 e 9 slow_cpu
444 1 e 1 nmi
@@ -37,6 +37,7 @@ entries
457 1 e 1 ECC_redirection
458 4 e 11 hypertransport_speed_limit
462 2 e 12 minimum_memory_voltage
+464 1 e 2 compute_unit_siblings
477 1 e 1 ieee1394_controller
728 256 h 0 user_data
984 16 h 0 check_sum
@@ -74,10 +75,12 @@ enumerations
6 6 Information
6 7 Debug
6 8 Spew
-8 0 DDR3-1600
-8 1 DDR3-1333
-8 2 DDR3-1066
-8 3 DDR3-800
+8 0 DDR3-1866
+8 1 DDR3-1600
+8 2 DDR3-1333
+8 3 DDR3-1066
+8 4 DDR3-800
+8 5 DDR3-667
9 0 off
9 1 87.5%
9 2 75.0%
diff --git a/src/mainboard/asus/kgpe-d16/devicetree.cb b/src/mainboard/asus/kgpe-d16/devicetree.cb
index e47e256507..abe6d1659f 100644
--- a/src/mainboard/asus/kgpe-d16/devicetree.cb
+++ b/src/mainboard/asus/kgpe-d16/devicetree.cb
@@ -220,21 +220,25 @@ chip northbridge/amd/amdfam10/root_complex # Root complex
device pci 18.2 on end
device pci 18.3 on end
device pci 18.4 on end
+ device pci 18.5 on end
device pci 19.0 on end # Socket 0 node 1
device pci 19.1 on end
device pci 19.2 on end
device pci 19.3 on end
device pci 19.4 on end
+ device pci 19.5 on end
device pci 1a.0 on end # Socket 1 node 0
device pci 1a.1 on end
device pci 1a.2 on end
device pci 1a.3 on end
device pci 1a.4 on end
+ device pci 1a.5 on end
device pci 1b.0 on end # Socket 1 node 1
device pci 1b.1 on end
device pci 1b.2 on end
device pci 1b.3 on end
device pci 1b.4 on end
+ device pci 1b.5 on end
end
end
end
diff --git a/src/mainboard/asus/kgpe-d16/resourcemap.c b/src/mainboard/asus/kgpe-d16/resourcemap.c
index 6d2c107b28..8bcb28ba58 100644
--- a/src/mainboard/asus/kgpe-d16/resourcemap.c
+++ b/src/mainboard/asus/kgpe-d16/resourcemap.c
@@ -19,7 +19,262 @@
static void setup_mb_resource_map(void)
{
- static const unsigned int register_values[] = {
+ static const unsigned int fam15h_register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [31:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Link 3
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00000000,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00000000,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Link 3
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00fff010, /* link 1 of cpu 0 --> AMD SR5690 */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independent of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001013,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Link 3
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration region i
+ */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x05000103, /* link 1 of cpu 0 --> AMD SR5690 */
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ };
+
+ static const unsigned int fam10h_register_values[] = {
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
@@ -275,6 +530,21 @@ static void setup_mb_resource_map(void)
};
int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
+ uint8_t fam15h = 0;
+ uint32_t family;
+
+ family = cpuid_eax(0x80000001);
+ family = ((family & 0xf00000) >> 16) | ((family & 0xf00) >> 8);
+
+ if (family >= 0x6f)
+ /* Family 15h or later */
+ fam15h = 1;
+
+ if (fam15h) {
+ max = ARRAY_SIZE(fam15h_register_values);
+ setup_resource_map(fam15h_register_values, max);
+ } else {
+ max = ARRAY_SIZE(fam10h_register_values);
+ setup_resource_map(fam10h_register_values, max);
+ }
}
diff --git a/src/mainboard/asus/kgpe-d16/romstage.c b/src/mainboard/asus/kgpe-d16/romstage.c
index 76cbb8ee2e..a718c14754 100644
--- a/src/mainboard/asus/kgpe-d16/romstage.c
+++ b/src/mainboard/asus/kgpe-d16/romstage.c
@@ -38,6 +38,7 @@
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct5572d/nct5572d.h>
#include <cpu/x86/bist.h>
+#include <smp/spinlock.h>
// #include "northbridge/amd/amdk8/incoherent_ht.c"
#include <southbridge/amd/sb700/sb700.h>
#include <southbridge/amd/sb700/smbus.h>
@@ -206,20 +207,20 @@ void DIMMSetVoltages(struct MCTStatStruc *pMCTstat,
if (pDCTstat->NodePresent && (node % 2)) {
/* Set voltages */
if (node_allowed_voltages & 0x8) {
- set_voltage = 1150;
+ set_voltage = 0x8;
set_ddr3_voltage(socket, 3);
} else if (node_allowed_voltages & 0x4) {
- set_voltage = 1250;
+ set_voltage = 0x4;
set_ddr3_voltage(socket, 2);
} else if (node_allowed_voltages & 0x2) {
- set_voltage = 1350;
+ set_voltage = 0x2;
set_ddr3_voltage(socket, 1);
} else {
- set_voltage = 1500;
+ set_voltage = 0x1;
set_ddr3_voltage(socket, 0);
}
- /* Save final DIMM voltages for SMBIOS use */
+ /* Save final DIMM voltages for MCT and SMBIOS use */
if (pDCTstat->NodePresent) {
for (dimm = 0; dimm < MAX_DIMMS_SUPPORTED; dimm++) {
pDCTstat->DimmConfiguredVoltage[dimm] = set_voltage;
@@ -233,6 +234,9 @@ void DIMMSetVoltages(struct MCTStatStruc *pMCTstat,
}
}
}
+
+ /* Allow the DDR supply voltages to settle */
+ udelay(100000);
}
static void set_peripheral_control_lines(void) {
@@ -372,7 +376,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_mb_resource_map();
post_code(0x36);
- /* wait for all the APs core0 started by finalize_node_setup. */
+ /* Wait for all the APs core0 started by finalize_node_setup. */
/* FIXME: A bunch of cores are going to start output to serial at once.
* It would be nice to fix up prink spinlocks for ROM XIP mode.
* I think it could be done by putting the spinlock flag in the cache
@@ -384,6 +388,14 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sr5650_early_setup();
sb7xx_51xx_early_setup();
+ if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) {
+ /* Core0 on each node is configured. Now setup any additional cores. */
+ printk(BIOS_DEBUG, "start_other_cores()\n");
+ start_other_cores();
+ post_code(0x37);
+ wait_all_other_cores_started(bsp_apicid);
+ }
+
if (IS_ENABLED(CONFIG_SET_FIDVID)) {
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
@@ -393,11 +405,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x39);
+ #if IS_ENABLED(CONFIG_SET_FIDVID)
if (!warm_reset_detect(0)) { // BSP is node 0
init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
} else {
init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
}
+ #endif
post_code(0x3A);
@@ -406,21 +420,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
}
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) {
- /* Core0 on each node is configured. Now setup any additional cores. */
- printk(BIOS_DEBUG, "start_other_cores()\n");
- start_other_cores();
- post_code(0x37);
- wait_all_other_cores_started(bsp_apicid);
- }
-
post_code(0x38);
init_timer(); // Need to use TMICT to synconize FID/VID
sr5650_htinit();
- /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
+ /* Reset for HT, FIDVID, PLL and errata changes to take effect. */
if (!warm_reset_detect(0)) {
printk(BIOS_INFO, "...WARM RESET...\n\n\n");
soft_reset();