summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2009-04-11 14:51:49 +0000
committerCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2009-04-11 14:51:49 +0000
commitebdc7c7cfebc14d503ab383e1493aa9fd10bd7e8 (patch)
tree9e3992f91a579ceb4aaee2352f5a7654a7bd7b71 /src/mainboard
parent4eb37059cea9ad4fae2f959dc023f6537f722717 (diff)
Kill remaining unneeded CAR/ROMCC if-blocks.
Lots of Config.lb files still have "if USE_DCACHE_RAM" sections although USE_DCACHE_RAM is always set for them. Such checks are not only pointless, they actively make the files hard to read. A full abuild run confirmed that compilation did not change with this patch applied. The patch does not change whitespace of the remaining code to ease review and svn blame. With this change, it should be possible to have two or three Config.lb variants in total (except the actual hardware config). Right now, some Config.lb have comments, some don't, some have empty lines for better readability, some don't, some have leading whitespace, some don't. This is an utter mess and unifying these files would certainly reduce the headaches I have when looking at them. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/amd/db800/Config.lb5
-rw-r--r--src/mainboard/amd/dbm690t/Config.lb16
-rw-r--r--src/mainboard/amd/norwich/Config.lb5
-rw-r--r--src/mainboard/amd/pistachio/Config.lb16
-rw-r--r--src/mainboard/amd/serengeti_cheetah/Config.lb15
-rw-r--r--src/mainboard/amd/serengeti_cheetah_fam10/Config.lb14
-rw-r--r--src/mainboard/artecgroup/dbe61/Config.lb6
-rw-r--r--src/mainboard/asus/a8n_e/Config.lb16
-rw-r--r--src/mainboard/asus/a8v-e_se/Config.lb10
-rw-r--r--src/mainboard/asus/m2v-mx_se/Config.lb10
-rw-r--r--src/mainboard/broadcom/blast/Config.lb16
-rw-r--r--src/mainboard/digitallogic/msm800sev/Config.lb6
-rw-r--r--src/mainboard/gigabyte/ga_2761gxdk/Config.lb15
-rw-r--r--src/mainboard/gigabyte/m57sli/Config.lb15
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/Config.lb4
-rw-r--r--src/mainboard/iwill/dk8_htx/Config.lb15
-rw-r--r--src/mainboard/lippert/roadrunner-lx/Config.lb5
-rw-r--r--src/mainboard/lippert/spacerunner-lx/Config.lb4
-rw-r--r--src/mainboard/msi/ms7135/Config.lb19
-rw-r--r--src/mainboard/msi/ms7260/Config.lb12
-rw-r--r--src/mainboard/msi/ms9185/Config.lb13
-rw-r--r--src/mainboard/nvidia/l1_2pvv/Config.lb16
-rw-r--r--src/mainboard/pcengines/alix1c/Config.lb6
-rw-r--r--src/mainboard/supermicro/h8dme/Config.lb15
-rw-r--r--src/mainboard/supermicro/h8dmr/Config.lb15
-rw-r--r--src/mainboard/technexion/tim8690/Config.lb16
-rw-r--r--src/mainboard/tyan/s2912/Config.lb16
-rw-r--r--src/mainboard/tyan/s2912_fam10/Config.lb15
28 files changed, 0 insertions, 336 deletions
diff --git a/src/mainboard/amd/db800/Config.lb b/src/mainboard/amd/db800/Config.lb
index 5b35a06f1a..e4edd27e3e 100644
--- a/src/mainboard/amd/db800/Config.lb
+++ b/src/mainboard/amd/db800/Config.lb
@@ -50,7 +50,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -58,8 +57,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -108,10 +105,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb
index fdff4bd6c9..24316ba6c1 100644
--- a/src/mainboard/amd/dbm690t/Config.lb
+++ b/src/mainboard/amd/dbm690t/Config.lb
@@ -83,8 +83,6 @@ end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
@@ -103,14 +101,12 @@ if USE_DCACHE_RAM
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -118,7 +114,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -137,12 +132,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -150,12 +143,7 @@ end
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
- else
ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
###
@@ -165,16 +153,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/amd/norwich/Config.lb b/src/mainboard/amd/norwich/Config.lb
index b42a98bd6f..3a6fd23edf 100644
--- a/src/mainboard/amd/norwich/Config.lb
+++ b/src/mainboard/amd/norwich/Config.lb
@@ -52,7 +52,6 @@ end
#object reset.o
-if USE_DCACHE_RAM
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -60,8 +59,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -110,10 +107,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/amd/pistachio/Config.lb b/src/mainboard/amd/pistachio/Config.lb
index 186a60970e..c1f513609e 100644
--- a/src/mainboard/amd/pistachio/Config.lb
+++ b/src/mainboard/amd/pistachio/Config.lb
@@ -83,8 +83,6 @@ end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
@@ -103,14 +101,12 @@ if USE_DCACHE_RAM
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -118,7 +114,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -137,12 +132,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -150,12 +143,7 @@ end
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
- else
ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
###
@@ -165,16 +153,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/amd/serengeti_cheetah/Config.lb b/src/mainboard/amd/serengeti_cheetah/Config.lb
index 039bf4bb05..a0ff3aef73 100644
--- a/src/mainboard/amd/serengeti_cheetah/Config.lb
+++ b/src/mainboard/amd/serengeti_cheetah/Config.lb
@@ -122,8 +122,6 @@ if HAVE_ACPI_TABLES
end
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
# compile cache_as_ram.c to auto.o
makerule ./cache_as_ram_auto.o
@@ -140,7 +138,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-end
if USE_FAILOVER_IMAGE
else
@@ -170,7 +167,6 @@ else
end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -178,7 +174,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -207,12 +202,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -221,15 +214,11 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
@@ -240,16 +229,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
index 3689ba2abc..d01785a1cf 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
@@ -129,7 +129,6 @@ if HAVE_ACPI_TABLES
end
end
-if USE_DCACHE_RAM
makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c
if CONFIG_USE_INIT
@@ -149,7 +148,6 @@ if USE_DCACHE_RAM
end
end
-end
if USE_FAILOVER_IMAGE
else
@@ -179,7 +177,6 @@ else
end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -187,7 +184,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -217,12 +213,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -231,15 +225,11 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
@@ -250,16 +240,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb
index 6184d83a25..a39cbdfe8c 100644
--- a/src/mainboard/artecgroup/dbe61/Config.lb
+++ b/src/mainboard/artecgroup/dbe61/Config.lb
@@ -47,8 +47,6 @@ driver mainboard.o
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-
-if USE_DCACHE_RAM
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -56,8 +54,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -106,10 +102,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb
index 410971c89e..a082ca957d 100644
--- a/src/mainboard/asus/a8n_e/Config.lb
+++ b/src/mainboard/asus/a8n_e/Config.lb
@@ -54,7 +54,6 @@ driver mainboard.o
object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -68,7 +67,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-end
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
@@ -81,12 +79,10 @@ else
end
end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -104,10 +100,6 @@ else
ldscript /cpu/x86/32bit/reset32.lds
end
end
-if USE_DCACHE_RAM
-else
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
# Include an ID string (for safe flashing).
mainboardinit southbridge/nvidia/ck804/id.inc
ldscript /southbridge/nvidia/ck804/id.lds
@@ -123,29 +115,21 @@ else
ldscript /southbridge/nvidia/ck804/romstrap.lds
end
end
-if USE_DCACHE_RAM
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-end
config chip.h
chip northbridge/amd/amdk8/root_complex # Root complex
diff --git a/src/mainboard/asus/a8v-e_se/Config.lb b/src/mainboard/asus/a8v-e_se/Config.lb
index 08be016ea0..9c094de560 100644
--- a/src/mainboard/asus/a8v-e_se/Config.lb
+++ b/src/mainboard/asus/a8v-e_se/Config.lb
@@ -52,7 +52,6 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
# object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -66,7 +65,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-end
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
@@ -77,14 +75,12 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -94,23 +90,17 @@ else
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
config chip.h
diff --git a/src/mainboard/asus/m2v-mx_se/Config.lb b/src/mainboard/asus/m2v-mx_se/Config.lb
index fec2300fde..8eac566e5e 100644
--- a/src/mainboard/asus/m2v-mx_se/Config.lb
+++ b/src/mainboard/asus/m2v-mx_se/Config.lb
@@ -55,7 +55,6 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
# object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -69,7 +68,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-end
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
@@ -80,14 +78,12 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -97,23 +93,17 @@ else
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
config chip.h
diff --git a/src/mainboard/broadcom/blast/Config.lb b/src/mainboard/broadcom/blast/Config.lb
index d77d099f4a..49c52f9418 100644
--- a/src/mainboard/broadcom/blast/Config.lb
+++ b/src/mainboard/broadcom/blast/Config.lb
@@ -50,8 +50,6 @@ end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
@@ -70,14 +68,12 @@ if USE_DCACHE_RAM
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -85,7 +81,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -104,12 +99,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -117,12 +110,7 @@ end
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
- else
ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
###
@@ -132,16 +120,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb
index 0c5cfec0d7..c40445a34f 100644
--- a/src/mainboard/digitallogic/msm800sev/Config.lb
+++ b/src/mainboard/digitallogic/msm800sev/Config.lb
@@ -48,7 +48,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -56,9 +55,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
-
-
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -107,10 +103,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
index 73f4d6e5fb..6bc6505afc 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
+++ b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
@@ -82,7 +82,6 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
@@ -98,8 +97,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -129,7 +126,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -137,8 +133,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -182,12 +176,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -196,29 +188,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
index b8ca49fb6a..0a5f017b92 100644
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -80,7 +80,6 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
@@ -96,8 +95,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -127,7 +124,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -135,8 +131,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -180,12 +174,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -194,15 +186,11 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
@@ -213,14 +201,11 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb
index 8ec000285f..7ff4556055 100644
--- a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb
+++ b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb
@@ -35,7 +35,6 @@ driver mainboard.o
if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
# Compile cache_as_ram.c to auto.inc.
makerule ./cache_as_ram_auto.inc
# depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -44,7 +43,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
@@ -63,10 +61,8 @@ if USE_FALLBACK_IMAGE
# mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
dir /pc80
config chip.h
diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb
index d9bed6ddd7..3bb42e86a5 100644
--- a/src/mainboard/iwill/dk8_htx/Config.lb
+++ b/src/mainboard/iwill/dk8_htx/Config.lb
@@ -129,8 +129,6 @@ if HAVE_ACPI_TABLES
end
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
# compile cache_as_ram.c to auto.o
makerule ./cache_as_ram_auto.o
@@ -148,7 +146,6 @@ if USE_DCACHE_RAM
end
end
-end
if USE_FAILOVER_IMAGE
else
@@ -178,7 +175,6 @@ else
end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -186,7 +182,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -215,12 +210,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -229,15 +222,11 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
@@ -248,16 +237,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/lippert/roadrunner-lx/Config.lb b/src/mainboard/lippert/roadrunner-lx/Config.lb
index 19dd58e091..182b482118 100644
--- a/src/mainboard/lippert/roadrunner-lx/Config.lb
+++ b/src/mainboard/lippert/roadrunner-lx/Config.lb
@@ -72,7 +72,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
# compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c"
@@ -80,8 +79,6 @@ if USE_DCACHE_RAM
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -130,10 +127,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary configuration files
diff --git a/src/mainboard/lippert/spacerunner-lx/Config.lb b/src/mainboard/lippert/spacerunner-lx/Config.lb
index 3e455f1470..243693de25 100644
--- a/src/mainboard/lippert/spacerunner-lx/Config.lb
+++ b/src/mainboard/lippert/spacerunner-lx/Config.lb
@@ -70,7 +70,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
# compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c"
@@ -78,7 +77,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -127,10 +125,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary configuration files
diff --git a/src/mainboard/msi/ms7135/Config.lb b/src/mainboard/msi/ms7135/Config.lb
index 1feec7fb63..a0174451cf 100644
--- a/src/mainboard/msi/ms7135/Config.lb
+++ b/src/mainboard/msi/ms7135/Config.lb
@@ -90,7 +90,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -104,7 +103,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code.
@@ -123,12 +121,10 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (this is where coreboot is entered).
@@ -151,12 +147,6 @@ else
end
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an ID string (for safe flashing).
##
@@ -178,13 +168,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
-
###
### This is the early phase of coreboot startup.
@@ -193,15 +180,11 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
@@ -212,13 +195,11 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-end
##
## Include the secondary configuration files
diff --git a/src/mainboard/msi/ms7260/Config.lb b/src/mainboard/msi/ms7260/Config.lb
index 992a424208..bdb9933d0a 100644
--- a/src/mainboard/msi/ms7260/Config.lb
+++ b/src/mainboard/msi/ms7260/Config.lb
@@ -54,7 +54,6 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
# object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -68,7 +67,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-end
if USE_FAILOVER_IMAGE
else
@@ -95,14 +93,12 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
@@ -138,31 +134,23 @@ else
end
end
-if USE_DCACHE_RAM
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
config chip.h
diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb
index 99f8b77907..99a6ce5e97 100644
--- a/src/mainboard/msi/ms9185/Config.lb
+++ b/src/mainboard/msi/ms9185/Config.lb
@@ -77,8 +77,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
# compile cache_as_ram.c to auto.o
makerule ./cache_as_ram_auto.o
@@ -96,7 +94,6 @@ if USE_DCACHE_RAM
end
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -107,7 +104,6 @@ if USE_FALLBACK_IMAGE
end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -115,7 +111,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -134,12 +129,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -147,9 +140,7 @@ end
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
###
@@ -159,16 +150,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/nvidia/l1_2pvv/Config.lb b/src/mainboard/nvidia/l1_2pvv/Config.lb
index bb1b99b113..f838107e3f 100644
--- a/src/mainboard/nvidia/l1_2pvv/Config.lb
+++ b/src/mainboard/nvidia/l1_2pvv/Config.lb
@@ -111,8 +111,6 @@ if HAVE_ACPI_TABLES
end
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -127,8 +125,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -158,7 +154,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -166,8 +161,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -211,12 +204,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -225,29 +216,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/pcengines/alix1c/Config.lb b/src/mainboard/pcengines/alix1c/Config.lb
index 17c9933050..023d082629 100644
--- a/src/mainboard/pcengines/alix1c/Config.lb
+++ b/src/mainboard/pcengines/alix1c/Config.lb
@@ -68,7 +68,6 @@ if HAVE_PIRQ_TABLE
object irq_tables.o
end
-if USE_DCACHE_RAM
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -76,9 +75,6 @@ if USE_DCACHE_RAM
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
-end
-
-
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -127,10 +123,8 @@ end
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
-if USE_DCACHE_RAM
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb
index 616e582442..fc696b2546 100644
--- a/src/mainboard/supermicro/h8dme/Config.lb
+++ b/src/mainboard/supermicro/h8dme/Config.lb
@@ -77,7 +77,6 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
@@ -93,8 +92,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -124,7 +121,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -132,8 +128,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -177,12 +171,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -191,29 +183,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb
index ed0c1101f8..ea6abb65d5 100644
--- a/src/mainboard/supermicro/h8dmr/Config.lb
+++ b/src/mainboard/supermicro/h8dmr/Config.lb
@@ -80,7 +80,6 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
@@ -96,8 +95,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -127,7 +124,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -135,8 +131,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -180,12 +174,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -194,29 +186,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb
index 9e3ebe7fd4..47a41e6577 100644
--- a/src/mainboard/technexion/tim8690/Config.lb
+++ b/src/mainboard/technexion/tim8690/Config.lb
@@ -83,8 +83,6 @@ end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
@@ -103,14 +101,12 @@ if USE_DCACHE_RAM
end
-end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -118,7 +114,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -137,12 +132,10 @@ end
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -150,12 +143,7 @@ end
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
- else
ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
###
@@ -165,16 +153,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb
index 28adac4e92..b0cac7b0f4 100644
--- a/src/mainboard/tyan/s2912/Config.lb
+++ b/src/mainboard/tyan/s2912/Config.lb
@@ -81,8 +81,6 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -97,8 +95,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -128,7 +124,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -136,8 +131,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -181,12 +174,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -195,29 +186,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb
index b9f1a5f3d8..b39e917b75 100644
--- a/src/mainboard/tyan/s2912_fam10/Config.lb
+++ b/src/mainboard/tyan/s2912_fam10/Config.lb
@@ -81,7 +81,6 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c
if CONFIG_USE_INIT
@@ -98,8 +97,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -129,7 +126,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -137,8 +133,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -182,12 +176,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -196,29 +188,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
-end
##
## Include the secondary Configuration files