diff options
author | Uwe Hermann <uwe@hermann-uwe.de> | 2008-11-19 13:42:14 +0000 |
---|---|---|
committer | Uwe Hermann <uwe@hermann-uwe.de> | 2008-11-19 13:42:14 +0000 |
commit | 86c9b8839217675cb1cc4830aa7d758864ee43f9 (patch) | |
tree | 3e66948c84653ea05bff591a34f8ac66ed414fd6 /src/mainboard | |
parent | f31ca16793ca2898e5983a12bdd706bfdd0d0efe (diff) |
Coding-style and whitespace fixes (also to make the code more similar
the Lippert Cool SpaceRunner LX which is already in svn).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3761 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard')
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/Config.lb | 205 | ||||
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/Options.lb | 78 | ||||
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c | 20 | ||||
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/chip.h | 7 | ||||
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/irq_tables.c | 26 | ||||
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/mainboard.c | 44 |
6 files changed, 195 insertions, 185 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/Config.lb b/src/mainboard/lippert/roadrunner-lx/Config.lb index cab9aa5f72..19dd58e091 100644 --- a/src/mainboard/lippert/roadrunner-lx/Config.lb +++ b/src/mainboard/lippert/roadrunner-lx/Config.lb @@ -3,8 +3,6 @@ ## ## Copyright (C) 2008 LiPPERT Embedded Computers GmbH ## -## Based on Config.lb from AMD's DB800 and DBM690T mainboards. -## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or @@ -20,15 +18,17 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## +## Based on Config.lb from AMD's DB800 and DBM690T mainboards. + ## ## Compute the location and size of where this firmware image ## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE) else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) default ROM_SECTION_OFFSET = 0 end @@ -38,12 +38,12 @@ end ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) ## ## Compute where this copy of coreboot will start in the boot rom ## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) +default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) ## ## Compute a range of ROM that can cached to speed up coreboot, @@ -52,8 +52,8 @@ default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE ## -default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) +default XIP_ROM_SIZE = 64 * 1024 +default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) ## @@ -73,12 +73,12 @@ if HAVE_PIRQ_TABLE end if USE_DCACHE_RAM - #compile cache_as_ram.c to auto.inc + # compile cache_as_ram.c to auto.inc makerule ./cache_as_ram_auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" + depends "$(MAINBOARD)/cache_as_ram_auto.c" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" end end @@ -136,97 +136,100 @@ if USE_DCACHE_RAM end ## -## Include the secondary Configuration files +## Include the secondary configuration files ## dir /pc80 config chip.h -register "sio_gp1x_config" = "0x20" # bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off Live LED + +# Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off Live LED. +register "sio_gp1x_config" = "0x20" chip northbridge/amd/lx - device pci_domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 - #io 0x64 = 0x1200 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device apic_cluster 0 on - chip cpu/amd/model_lx - device apic 0 on end - end - end + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 # Southbridge + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci e.0 on end # Ethernet + device pci f.0 on # ISA bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 + # io 0x64 = 0x1200 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end end diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb index 4c03b2c702..a6be7974c9 100644 --- a/src/mainboard/lippert/roadrunner-lx/Options.lb +++ b/src/mainboard/lippert/roadrunner-lx/Options.lb @@ -3,8 +3,6 @@ ## ## Copyright (C) 2008 LiPPERT Embedded Computers GmbH ## -## Based on Options.lb from AMD's DB800 mainboard. -## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or @@ -20,6 +18,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## +## Based on Options.lb from AMD's DB800 mainboard. + uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE @@ -80,71 +80,71 @@ uses DCACHE_RAM_SIZE uses PIRQ_ROUTE ## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 512*1024 +default ROM_SIZE = 512 * 1024 ### ### Build options ### -default CONFIG_CONSOLE_VGA=0 -default CONFIG_VIDEO_MB=8 -default CONFIG_PCI_ROM_RUN=0 +default CONFIG_CONSOLE_VGA = 0 +default CONFIG_VIDEO_MB = 8 +default CONFIG_PCI_ROM_RUN = 0 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default HAVE_FALLBACK_BOOT = 1 ## ## no MP table ## -default HAVE_MP_TABLE=0 +default HAVE_MP_TABLE = 0 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=0 +default HAVE_HARD_RESET = 0 ## Delay timer options ## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 +default CONFIG_UDELAY_TSC = 1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=7 -default PIRQ_ROUTE=1 +default HAVE_PIRQ_TABLE = 1 +default IRQ_SLOT_COUNT = 7 +default PIRQ_ROUTE = 1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=0 +default HAVE_OPTION_TABLE = 0 ### ### coreboot layout values ### ## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 -default FALLBACK_SIZE = 131072 +default ROM_IMAGE_SIZE = 64 * 1024 +default FALLBACK_SIZE = 128 * 1024 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xc8000 -default DCACHE_RAM_SIZE=0x08000 +default USE_DCACHE_RAM = 1 +default DCACHE_RAM_BASE = 0xc8000 +default DCACHE_RAM_SIZE = 0x08000 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default STACK_SIZE = 8 * 1024 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default HEAP_SIZE = 16 * 1024 ## ## Only use the option table in a normal image @@ -159,36 +159,36 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CROSS_COMPILE="" -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CROSS_COMPILE = "" +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" ## ## The Serial Console ## # To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 +default CONFIG_CONSOLE_SERIAL8250 = 1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default TTYS0_BAUD = 115200 +#default TTYS0_BAUD = 57600 +#default TTYS0_BAUD = 38400 +#default TTYS0_BAUD = 19200 +#default TTYS0_BAUD = 9600 +#default TTYS0_BAUD = 4800 +#default TTYS0_BAUD = 2400 +#default TTYS0_BAUD = 1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default TTYS0_BASE = 0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default TTYS0_LCS = 0x3 # Compile extra debugging code -default DEBUG=1 +default DEBUG = 1 ## ### Select the coreboot loglevel @@ -204,8 +204,8 @@ default DEBUG=1 ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default DEFAULT_CONSOLE_LOGLEVEL = 8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default MAXIMUM_CONSOLE_LOGLEVEL = 8 end diff --git a/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c b/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c index ce55aa0afe..660a9de02f 100644 --- a/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c +++ b/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c @@ -4,8 +4,6 @@ * Copyright (C) 2008 LiPPERT Embedded Computers GmbH * Copyright (C) 2007 Advanced Micro Devices, Inc. * - * Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -21,6 +19,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. */ + #define ASSEMBLY 1 #include <stdlib.h> @@ -52,7 +52,9 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) { - if (device != DIMM0) return 0xFF; // no DIMM1, don't even try + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + return smbus_read_byte(device, address); } @@ -120,11 +122,12 @@ static void mb_gpio_init(void) { int i; - /* Init SuperIO WDT, GPIOs. Done early, WDT init may trigger reset! */ + /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ it8712f_enter_conf(); - for (i=0; i<ARRAY_SIZE(sio_init_table); i++) { + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { u16 val = sio_init_table[i]; - outb((u8)val, SIO_INDEX); outb(val>>8, SIO_DATA); + outb((u8)val, SIO_INDEX); + outb(val >> 8, SIO_DATA); } it8712f_exit_conf(); } @@ -142,10 +145,11 @@ void cache_as_ram_main(void) cs5536_early_setup(); - /* Note: must do this AFTER the early_setup! It is counting on some + /* + * Note: must do this AFTER the early_setup! It is counting on some * early MSR setup for CS5536. */ - it8712f_enable_serial(0, TTYS0_BASE); // does not use its 1st parameter + it8712f_enable_serial(0, TTYS0_BASE); // Does not use its 1st parameter mb_gpio_init(); uart_init(); console_init(); diff --git a/src/mainboard/lippert/roadrunner-lx/chip.h b/src/mainboard/lippert/roadrunner-lx/chip.h index 9af3fe3bf8..5a676edf0e 100644 --- a/src/mainboard/lippert/roadrunner-lx/chip.h +++ b/src/mainboard/lippert/roadrunner-lx/chip.h @@ -3,8 +3,6 @@ * * Copyright (C) 2008 LiPPERT Embedded Computers GmbH * - * Based on chip.h from AMD's DB800 mainboard. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -20,10 +18,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* Based on chip.h from AMD's DB800 mainboard. */ + #include <stdint.h> extern struct chip_operations mainboard_lippert_roadrunner_lx_ops; struct mainboard_lippert_roadrunner_lx_config { - u8 sio_gp1x_config; // bit5=Live LED, bit2=RS485_EN2, bit1=RS485_EN1 + /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */ + u8 sio_gp1x_config; }; diff --git a/src/mainboard/lippert/roadrunner-lx/irq_tables.c b/src/mainboard/lippert/roadrunner-lx/irq_tables.c index 1249c05da5..4ee33d4245 100644 --- a/src/mainboard/lippert/roadrunner-lx/irq_tables.c +++ b/src/mainboard/lippert/roadrunner-lx/irq_tables.c @@ -3,8 +3,6 @@ * * Copyright (C) 2008 LiPPERT Embedded Computers GmbH * - * Based on irq_tables.c from AMD's DB800 mainboard. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -20,6 +18,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* Based on irq_tables.c from AMD's DB800 mainboard. */ + #include <arch/pirq_routing.h> #include <console/console.h> #include <arch/io.h> @@ -47,7 +47,7 @@ const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ - 32 + 16 * IRQ_SLOT_COUNT, /* there can be total 7 devices on the bus */ + 32 + 16 * IRQ_SLOT_COUNT,/* there can be total 7 devices on the bus */ 0x00, /* Where the interrupt router lies (bus) */ (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ 0x00, /* IRQs devoted exclusively to PCI usage */ @@ -55,17 +55,17 @@ const struct irq_routing_table intel_irq_routing_table = { 0x002B, /* Device */ 0, /* Crap (miniport) */ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { - /* If you change the number of entries, change the IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ + /* If you change the number of entries, change the IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ + {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ + {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ + {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ + {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ } }; diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c index cb3c2306ea..a09e77dd89 100644 --- a/src/mainboard/lippert/roadrunner-lx/mainboard.c +++ b/src/mainboard/lippert/roadrunner-lx/mainboard.c @@ -3,8 +3,6 @@ * * Copyright (C) 2008 LiPPERT Embedded Computers GmbH * - * Based on mainboard.c from AMD's DB800 mainboard. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -20,6 +18,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* Based on mainboard.c from AMD's DB800 mainboard. */ + #include <stdlib.h> #include <stdint.h> #include <console/console.h> @@ -29,13 +29,13 @@ #include <device/pci_ids.h> #include "chip.h" -static const u16 ec_init_table[] = { // hi=data, lo=index - 0x1900, // enable monitoring - 0x0351, // TMPIN1,2 diode mode, TMPIN3 off - 0x805C, // unlock zero adjust - 0x7056, 0x3C57, // zero adjust TMPIN1,2 - 0x005C, // lock zero adjust - 0xD014 // also set FAN_CTL polarity to Active High +static const u16 ec_init_table[] = { /* hi=data, lo=index */ + 0x1900, /* Enable monitoring */ + 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ + 0x805C, /* Unlock zero adjust */ + 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ + 0x005C, /* Lock zero adjust */ + 0xD014 /* Also set FAN_CTL polarity to Active High */ }; static void init(struct device *dev) @@ -44,22 +44,24 @@ static void init(struct device *dev) unsigned int gpio_base, i; printk_debug("LiPPERT RoadRunner-LX ENTER %s\n", __FUNCTION__); - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, 0), - PCI_BASE_ADDRESS_1) - 1; - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED + /* Init CS5536 GPIOs. */ + gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; + + outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# + outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# + outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# + outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED - /* Init Environment Controller */ - for (i=0; i<ARRAY_SIZE(ec_init_table); i++) { + /* Init Environment Controller. */ + for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); outb(val>>8, 0x0296); + outb((u8)val, 0x0295); + outb(val >> 8, 0x0296); } - outb(mb->sio_gp1x_config, 0x1220); // Simple-I/O GP17-10 + outb(mb->sio_gp1x_config, 0x1220); /* Simple-I/O GP17-10 */ printk_debug("LiPPERT RoadRunner-LX EXIT %s\n", __FUNCTION__); } |