summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2013-03-20 21:43:50 +0100
committerStefan Reinauer <stefan.reinauer@coreboot.org>2013-03-22 04:02:39 +0100
commitc8eab2c0441851a141ef47d10022fb385d0eacad (patch)
treef495bcd764263b4d4a0f193e3806c394243d1099 /src/mainboard
parent5605f1b4ab7661f893bf0f10aea72cacdd51dc99 (diff)
Add support for ASUS F2A85-M board
The patch is based on Thatcher board. So far it boots Linux (3.2/3.7), internal network adapter works, AHCI works. External PCI/PCIe slots works too. Power management/ACPI seems to work. Internal VGA works with dumped ROM (VGA/DVI), but lacks GART. PCI pref devices are being relocated by Linux, reason unknown. This is a good start. USB and XHCI untested but visible. Change-Id: I1869aecb2634d548b00b3c9139517d6a0e0c9817 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/2038 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/asus/Kconfig3
-rw-r--r--src/mainboard/asus/f2a85-m/BiosCallOuts.c126
-rw-r--r--src/mainboard/asus/f2a85-m/BiosCallOuts.h31
-rw-r--r--src/mainboard/asus/f2a85-m/Kconfig133
-rw-r--r--src/mainboard/asus/f2a85-m/Makefile.inc28
-rw-r--r--src/mainboard/asus/f2a85-m/OptionsIds.h67
-rw-r--r--src/mainboard/asus/f2a85-m/PlatformGnbPcie.c206
-rw-r--r--src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h72
-rw-r--r--src/mainboard/asus/f2a85-m/acpi/AmdImc.asl97
-rw-r--r--src/mainboard/asus/f2a85-m/acpi/cpstate.asl115
-rw-r--r--src/mainboard/asus/f2a85-m/acpi/ide.asl244
-rw-r--r--src/mainboard/asus/f2a85-m/acpi/routing.asl207
-rw-r--r--src/mainboard/asus/f2a85-m/acpi/sata.asl148
-rw-r--r--src/mainboard/asus/f2a85-m/acpi/usb.asl114
-rw-r--r--src/mainboard/asus/f2a85-m/acpi_tables.c329
-rw-r--r--src/mainboard/asus/f2a85-m/agesawrapper.c775
-rw-r--r--src/mainboard/asus/f2a85-m/agesawrapper.h97
-rw-r--r--src/mainboard/asus/f2a85-m/buildOpts.c517
-rw-r--r--src/mainboard/asus/f2a85-m/cmos.layout114
-rw-r--r--src/mainboard/asus/f2a85-m/devicetree.cb130
-rw-r--r--src/mainboard/asus/f2a85-m/dsdt.asl1411
-rw-r--r--src/mainboard/asus/f2a85-m/get_bus_conf.c139
-rw-r--r--src/mainboard/asus/f2a85-m/irq_tables.c112
-rw-r--r--src/mainboard/asus/f2a85-m/mainboard.c68
-rw-r--r--src/mainboard/asus/f2a85-m/mptable.c195
-rw-r--r--src/mainboard/asus/f2a85-m/pmio.h33
-rw-r--r--src/mainboard/asus/f2a85-m/romstage.c205
27 files changed, 5716 insertions, 0 deletions
diff --git a/src/mainboard/asus/Kconfig b/src/mainboard/asus/Kconfig
index 6e6b420d11..66057df3ed 100644
--- a/src/mainboard/asus/Kconfig
+++ b/src/mainboard/asus/Kconfig
@@ -27,6 +27,8 @@ config BOARD_ASUS_A8V_E_SE
bool "A8V-E SE"
config BOARD_ASUS_A8V_E_DELUXE
bool "A8V-E Deluxe"
+config BOARD_ASUS_F2A85_M
+ bool "F2A85-M"
config BOARD_ASUS_K8V_X
bool "K8V-X"
config BOARD_ASUS_M2N_E
@@ -66,6 +68,7 @@ endchoice
source "src/mainboard/asus/a8n_e/Kconfig"
source "src/mainboard/asus/a8v-e_se/Kconfig"
source "src/mainboard/asus/a8v-e_deluxe/Kconfig"
+source "src/mainboard/asus/f2a85-m/Kconfig"
source "src/mainboard/asus/k8v-x/Kconfig"
source "src/mainboard/asus/m2n-e/Kconfig"
source "src/mainboard/asus/m2v/Kconfig"
diff --git a/src/mainboard/asus/f2a85-m/BiosCallOuts.c b/src/mainboard/asus/f2a85-m/BiosCallOuts.c
new file mode 100644
index 0000000000..f9760011a5
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/BiosCallOuts.c
@@ -0,0 +1,126 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+
+STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_ALLOCATE_BUFFER, fam15tn_AllocateBuffer },
+ {AGESA_DEALLOCATE_BUFFER, fam15tn_DeallocateBuffer },
+ {AGESA_DO_RESET, fam15tn_Reset },
+ {AGESA_LOCATE_BUFFER, fam15tn_LocateBuffer },
+ {AGESA_READ_SPD, fam15tn_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, fam15tn_DefaultRet },
+ {AGESA_RUNFUNC_ONAP, fam15tn_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, fam15tn_GetIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, fam15tn_HookBeforeDQSTraining },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, fam15tn_HookBeforeExitSelfRefresh },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, fam15tn_HookGfxGetVbiosImage }
+};
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+ UINTN i;
+ AGESA_STATUS CalloutStatus;
+ UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
+
+ for (i = 0; i < CallOutCount; i++)
+ {
+ if (BiosCallouts[i].CalloutName == Func)
+ break;
+ }
+
+ if(i >= CallOutCount)
+ return AGESA_UNSUPPORTED;
+
+ CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+ return CalloutStatus;
+}
+
+/**
+ * AMD Thatcher Platform ALC272 Verb Table
+ */
+const CODEC_ENTRY Thatcher_Alc272_VerbTbl[] = {
+ {0x11, 0x411111F0},
+ {0x12, 0x411111F0},
+ {0x13, 0x411111F0},
+ {0x14, 0x411111F0},
+ {0x15, 0x411111F0},
+ {0x16, 0x411111F0},
+ {0x17, 0x411111F0},
+ {0x18, 0x01a19840},
+ {0x19, 0x411111F0},
+ {0x1a, 0x01813030},
+ {0x1b, 0x411111F0},
+ {0x1d, 0x40130605},
+ {0x1e, 0x01441120},
+ {0x21, 0x01211010},
+ {0xff, 0xffffffff}
+};
+
+const CODEC_TBL_LIST ThatcherCodecTableList[] =
+{
+ {0x10ec0272, (CODEC_ENTRY*)&Thatcher_Alc272_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, GEC, IMC etc.
+ */
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData;
+
+ if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
+#if CONFIG_HUDSON_LEGACY_FREE
+ FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *) FchData;
+ FchParams_reset->LegacyFree = 1;
+#endif
+ printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+ } else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&ThatcherCodecTableList[0]);
+ /* Azalia Controller Front Panel OEM Table Pointer */
+ FchParams_env->Imc.ImcEnable = FALSE;
+ FchParams_env->Hwm.HwMonitorEnable = FALSE;
+ FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
+
+ /* XHCI configuration */
+ FchParams_env->Usb.Xhci0Enable = TRUE;
+ FchParams_env->Usb.Xhci1Enable = TRUE;
+ }
+ printk(BIOS_DEBUG, "Done\n");
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/mainboard/asus/f2a85-m/BiosCallOuts.h b/src/mainboard/asus/f2a85-m/BiosCallOuts.h
new file mode 100644
index 0000000000..9132facff4
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/BiosCallOuts.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include <northbridge/amd/agesa/family15tn/fam15tn_callouts.h>
+
+/* CALLOUT Initialization */
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* FCH OEM Config*/
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/asus/f2a85-m/Kconfig b/src/mainboard/asus/f2a85-m/Kconfig
new file mode 100644
index 0000000000..e8f573ed37
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/Kconfig
@@ -0,0 +1,133 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2012 Rudolf Marek <r.marek@assembler.cz>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+if BOARD_ASUS_F2A85_M
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ARCH_X86
+ select CPU_AMD_AGESA_FAMILY15_TN
+ select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN_ROOT_COMPLEX
+ select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN
+ select SOUTHBRIDGE_AMD_AGESA_HUDSON
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_HARD_RESET
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select LIFT_BSP_APIC_ID
+ select SERIAL_CPU_INIT
+ select AMDMCT
+ select HAVE_ACPI_TABLES
+ select SUPERIO_ITE_IT8712F
+ select BOARD_ROMSIZE_KB_8192
+ select GFXUMA
+ select UDELAY_LAPIC
+
+choice
+ prompt "DDR3 memory voltage"
+ default BOARD_ASUS_F2A85_M_DDR3_VOLT_150
+
+config BOARD_ASUS_F2A85_M_DDR3_VOLT_135
+ bool "1.35V"
+ help
+ Set DRR3 memory voltage to 1.35V
+config BOARD_ASUS_F2A85_M_DDR3_VOLT_150
+ bool "1.50V"
+ help
+ Set DRR3 memory voltage to 1.50V
+config BOARD_ASUS_F2A85_M_DDR3_VOLT_165
+ bool "1.65V"
+ help
+ Set DRR3 memory voltage to 1.65V
+endchoice
+
+config BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL
+ hex
+ default 0x9e if BOARD_ASUS_F2A85_M_DDR3_VOLT_135
+ default 0x0 if BOARD_ASUS_F2A85_M_DDR3_VOLT_150
+ default 0x1e if BOARD_ASUS_F2A85_M_DDR3_VOLT_165
+
+config MAINBOARD_DIR
+ string
+ default asus/f2a85-m
+
+config APIC_ID_OFFSET
+ hex
+ default 0x0
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "F2A85-M"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 4
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 1
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+config MEM_TRAIN_SEQ
+ int
+ default 2
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config RAMTOP
+ hex
+ default 0x1000000
+
+config HEAP_SIZE
+ hex
+ default 0xc0000
+
+config STACK_SIZE
+ hex
+ default 0x10000
+
+config RAMBASE
+ hex
+ default 0x200000
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config VGA_BIOS_ID
+ string
+ default "1002,9993"
+
+config HUDSON_LEGACY_FREE
+ bool
+ default y
+
+endif # BOARD_ASUS_F2A85_M
diff --git a/src/mainboard/asus/f2a85-m/Makefile.inc b/src/mainboard/asus/f2a85-m/Makefile.inc
new file mode 100644
index 0000000000..3103f70d11
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/Makefile.inc
@@ -0,0 +1,28 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+romstage-y += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += BiosCallOuts.c
+romstage-y += PlatformGnbPcie.c
+
+ramstage-y += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += PlatformGnbPcie.c
diff --git a/src/mainboard/asus/f2a85-m/OptionsIds.h b/src/mainboard/asus/f2a85-m/OptionsIds.h
new file mode 100644
index 0000000000..bf7eedcb3b
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/OptionsIds.h
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 12067 $ @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+//#define IDSOPT_IDS_ENABLED TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+//#define IDSOPT_PERF_ANALYSIS TRUE
+#define IDSOPT_ASSERT_ENABLED TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT FALSE
+//#define IDS_DEBUG_PORT 0x80
+
+#endif
diff --git a/src/mainboard/asus/f2a85-m/PlatformGnbPcie.c b/src/mainboard/asus/f2a85-m/PlatformGnbPcie.c
new file mode 100644
index 0000000000..8ee67079d7
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/PlatformGnbPcie.c
@@ -0,0 +1,206 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+PCIe_PORT_DESCRIPTOR PortList [] = {
+ /* PCIe port, Lanes 8:23, PCI Device Number 2 */
+ {
+ 0, /* Descriptor flags */
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 23),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+ /* PCIe port, Lanes 16:23, PCI Device Number 3 */
+ {
+ 0, /* Descriptor flags */
+ PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 16, 23),
+ PCIE_PORT_DATA_INITIALIZER (PortDisabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+
+ /* PCIe port, Lanes 4, PCI Device Number 4, PCIE MINI0 */
+ {
+ 0, /* Descriptor flags */
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+
+ /* PCIe port, Lanes 5, PCI Device Number 5, PCIE MINI1 */
+ {
+ 0, /* Descriptor flags */
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 5, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+
+ /* PCIe port, Lanes 6, PCI Device Number 6, PCIE SLOT1, TODO: Disabled. */
+ {
+ 0, /* Descriptor flags */
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 6, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+
+ /* PCIe port, Lanes 7, PCI Device Number 7, LAN , TODO: not the last entry.*/
+ {
+ 0, /* Descriptor flags !!!IMPORTANT!!! Terminate last element of array */
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 7, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+
+#if 1
+ /* Initialize Port descriptor (PCIe port, Lanes ?, PCI Device Number 8, ...) */
+ {
+ DESCRIPTOR_TERMINATE_LIST, /* Descriptor flags !!!IMPORTANT!!! Terminate last element of array */
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 8, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+ },
+#endif
+};
+
+PCIe_DDI_DESCRIPTOR DdiList [] = {
+ // DP0 to HDMI0/DP
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1)
+ },
+ // DP1 to FCH
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeNutmegDpToVga, Aux2, Hdp2)
+ },
+ // DP2 to HDMI1/DP
+ {
+ 0,
+// PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 32, 38),
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 35),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeEDP, Aux3, Hdp3)
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux3, Hdp3)
+ },
+ // GFX Lane 15-12
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 12, 15),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux4, Hdp4)
+ },
+ // GFX Lane 11-8
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 16, 19),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux5, Hdp5)
+ },
+ // GFX Lane 7-4
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 20, 23),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux6, Hdp6)
+ }
+};
+
+PCIe_COMPLEX_DESCRIPTOR Trinity = {
+ DESCRIPTOR_TERMINATE_LIST,
+ 0,
+ &PortList[0],
+ &DdiList[0]
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] **PeiServices
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ )
+{
+ AGESA_STATUS Status;
+ VOID *TrinityPcieComplexListPtr;
+ VOID *TrinityPciePortPtr;
+ VOID *TrinityPcieDdiPtr;
+
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ // GNB PCIe topology Porting
+
+ //
+ // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ //
+ AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) +
+ sizeof (PCIe_PORT_DESCRIPTOR) * 7 +
+ sizeof (PCIe_DDI_DESCRIPTOR)) * 6;
+
+ AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+ if ( Status!= AGESA_SUCCESS) {
+ // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ ASSERT(FALSE);
+ return;
+ }
+
+ TrinityPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR);
+ TrinityPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 7;
+ TrinityPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ LibAmdMemFill (TrinityPcieComplexListPtr,
+ 0,
+ sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ &InitEarly->StdHeader);
+
+ LibAmdMemFill (TrinityPciePortPtr,
+ 0,
+ sizeof (PCIe_PORT_DESCRIPTOR) * 7,
+ &InitEarly->StdHeader);
+
+ LibAmdMemFill (TrinityPcieDdiPtr,
+ 0,
+ sizeof (PCIe_DDI_DESCRIPTOR) * 6,
+ &InitEarly->StdHeader);
+
+ LibAmdMemCopy (TrinityPcieComplexListPtr, &Trinity, sizeof (PCIe_COMPLEX_DESCRIPTOR), &InitEarly->StdHeader);
+ LibAmdMemCopy (TrinityPciePortPtr, &PortList[0], sizeof (PCIe_PORT_DESCRIPTOR) * 7, &InitEarly->StdHeader);
+ LibAmdMemCopy (TrinityPcieDdiPtr, &DdiList[0], sizeof (PCIe_DDI_DESCRIPTOR) * 6, &InitEarly->StdHeader);
+
+ ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)TrinityPciePortPtr;
+ ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)TrinityPcieDdiPtr;
+
+ InitEarly->GnbConfig.PcieComplexList = TrinityPcieComplexListPtr;
+}
diff --git a/src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h b/src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h
new file mode 100644
index 0000000000..3f14805b7c
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h
@@ -0,0 +1,72 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
+#define _PLATFORM_GNB_PCIE_COMPLEX_H
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+
+//GNB GPP Port4
+#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port5
+#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port6
+#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port7
+#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port8
+#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+VOID
+OemCustomizeInitEarly (
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ );
+
+#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/asus/f2a85-m/acpi/AmdImc.asl b/src/mainboard/asus/f2a85-m/acpi/AmdImc.asl
new file mode 100644
index 0000000000..f55a12ad18
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi/AmdImc.asl
@@ -0,0 +1,97 @@
+//BTDC Due to IMC Fan, ACPI control codes
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+ IMCX,8,
+ IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+ Offset(0x80),
+ MSTI, 8,
+ MITS, 8,
+ MRG0, 8,
+ MRG1, 8,
+ MRG2, 8,
+ MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+ Store(0, Local0)
+ Store(50, Local1)
+ While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) {
+ Store(MRG0, Local0)
+ Sleep(10)
+ Decrement(Local1)
+ }
+}
+
+//Init
+Method (ITZE, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(1, MRG1)
+ Store(0, MRG2)
+ Store(0x98, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0xB4, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
diff --git a/src/mainboard/asus/f2a85-m/acpi/cpstate.asl b/src/mainboard/asus/f2a85-m/acpi/cpstate.asl
new file mode 100644
index 0000000000..2240fd6907
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi/cpstate.asl
@@ -0,0 +1,115 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This file defines the processor and performance state capability
+ * for each core in the system. It is included into the DSDT for each
+ * core. It assumes that each core of the system has the same performance
+ * characteristics.
+*/
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001)
+ {
+ Scope (\_PR) {
+ Processor(CPU0,0,0x808,0x06) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU1,1,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU2,2,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU3,3,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ }
+*/
+ /* P-state support: The maximum number of P-states supported by the */
+ /* CPUs we'll use is 6. */
+ /* Get from AMI BIOS. */
+ Name(_PSS, Package(){
+ Package()
+ {
+ 0x00000D48,
+ 0x00011170,
+ 0x00000004,
+ 0x00000004,
+ 0x00000000,
+ 0x00000000
+ },
+
+ Package()
+ {
+ 0x00000AF0,
+ 0x0000C544,
+ 0x00000004,
+ 0x00000004,
+ 0x00000001,
+ 0x00000001
+ },
+
+ Package()
+ {
+ 0x000009C4,
+ 0x0000B3B0,
+ 0x00000004,
+ 0x00000004,
+ 0x00000002,
+ 0x00000002
+ },
+
+ Package()
+ {
+ 0x00000898,
+ 0x0000ABE0,
+ 0x00000004,
+ 0x00000004,
+ 0x00000003,
+ 0x00000003
+ },
+
+ Package()
+ {
+ 0x00000708,
+ 0x0000A410,
+ 0x00000004,
+ 0x00000004,
+ 0x00000004,
+ 0x00000004
+ },
+
+ Package()
+ {
+ 0x00000578,
+ 0x00006F54,
+ 0x00000004,
+ 0x00000004,
+ 0x00000005,
+ 0x00000005
+ }
+ })
+
+ Name(_PCT, Package(){
+ ResourceTemplate(){Register(FFixedHW, 0, 0, 0)},
+ ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}
+ })
+
+ Method(_PPC, 0){
+ Return(0)
+ }
diff --git a/src/mainboard/asus/f2a85-m/acpi/ide.asl b/src/mainboard/asus/f2a85-m/acpi/ide.asl
new file mode 100644
index 0000000000..1ff2e799a5
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi/ide.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "ide.asl"
+ }
+ }
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+ 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+ 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+ 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+ 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+ 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+ PPTS, 8, /* Primary PIO Slave Timing */
+ PPTM, 8, /* Primary PIO Master Timing */
+ OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
+ PMTM, 8, /* Primary MWDMA Master Timing */
+ OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPSM, 4, /* Primary PIO slave Mode */
+ OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ PDSM, 4, /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+ Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
+ Increment(Local0)
+ Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
+ Increment(Local1)
+ Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+ Name (_ADR, Zero)
+ Method(_GTM, 0)
+ {
+ NAME(OTBF, Buffer(20) { /* out buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+ CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+ /* Just return if the channel is disabled */
+ If(And(PPCR, 0x01)) { /* primary PIO control */
+ Return(OTBF)
+ }
+
+ /* Always tell them independent timing available and IOChannelReady used on both drives */
+ Or(BFFG, 0x1A, BFFG)
+
+ Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
+ Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
+
+ If(And(PDCR, 0x01)) { /* It's under UDMA mode */
+ Or(BFFG, 0x01, BFFG)
+ Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+ }
+ Else {
+ Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
+ }
+
+ If(And(PDCR, 0x02)) { /* It's under UDMA mode */
+ Or(BFFG, 0x04, BFFG)
+ Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+ }
+ Else {
+ Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
+ }
+
+ Return(OTBF) /* out buffer */
+ } /* End Method(_GTM) */
+
+ Method(_STM, 3, NotSerialized)
+ {
+ NAME(INBF, Buffer(20) { /* in buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+ Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+ Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+ Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+ Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+ Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+ If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDMM,)
+ Or(PDCR, 0x01, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTM)
+ }
+ }
+
+ If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDSM,)
+ Or(PDCR, 0x02, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTS)
+ }
+ }
+ /* Return(INBF) */
+ } /*End Method(_STM) */
+ Device(MST)
+ {
+ Name(_ADR, 0)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xA0, CMDA)
+ Store(0xA0, CMDB)
+ Store(0xA0, CMDC)
+
+ Or(PPMM, 0x08, POMD)
+
+ If(And(PDCR, 0x01)) {
+ Or(PDMM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTM),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(MST) */
+
+ Device(SLAV)
+ {
+ Name(_ADR, 1)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xB0, CMDA)
+ Store(0xB0, CMDB)
+ Store(0xB0, CMDC)
+
+ Or(PPSM, 0x08, POMD)
+
+ If(And(PDCR, 0x02)) {
+ Or(PDSM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTS),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(SLAV) */
+}
diff --git a/src/mainboard/asus/f2a85-m/acpi/routing.asl b/src/mainboard/asus/f2a85-m/acpi/routing.asl
new file mode 100644
index 0000000000..03027c3a41
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi/routing.asl
@@ -0,0 +1,207 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, INTB, 0 },
+ Package(){0x0001FFFF, 1, INTC, 0 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x16 slot */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for 4x slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+
+
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices */
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+ * EHCI, dev 18, 19 func 2 */
+ Package(){0x0012FFFF, 0, INTC, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, INTC, 0 },
+ Package(){0x0010FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+ /* Bus 0, Dev 21 Pcie Bridge */
+ Package(){0x0015FFFF, 0, INTA, 0 },
+ Package(){0x0015FFFF, 1, INTB, 0 },
+ Package(){0x0015FFFF, 2, INTC, 0 },
+ Package(){0x0015FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0, 17 },
+ package(){0x0001FFFF, 1, 0, 18 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ Package(){0x0002FFFF, 1, 0, 19 },
+ Package(){0x0002FFFF, 2, 0, 16 },
+ Package(){0x0002FFFF, 3, 0, 17 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for x4 PCIe Slot black */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ Package(){0x0004FFFF, 1, 0, 17 },
+ Package(){0x0004FFFF, 2, 0, 18 },
+ Package(){0x0004FFFF, 3, 0, 19 },
+
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+ * EHCI, dev 18, 19 func 2 */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, 0, 0x12},
+ Package(){0x0010FFFF, 1, 0, 0x11},
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+ /* Bus0, Dev 21 PCIE Bridge */
+ Package(){0x0015FFFF, 0, 0, 16 },
+ Package(){0x0015FFFF, 1, 0, 17 },
+ Package(){0x0015FFFF, 2, 0, 18 },
+ Package(){0x0015FFFF, 3, 0, 19 },
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 0x12 },
+ Package(){0x0000FFFF, 1, 0, 0x13 },
+ Package(){0x0000FFFF, 2, 0, 0x10 },
+ Package(){0x0000FFFF, 3, 0, 0x11 },
+ })
+
+ /* black slot */
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot x4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot x4 */
+ Package(){0x0000FFFF, 0, 0, 0x10 },
+ Package(){0x0000FFFF, 1, 0, 0x11 },
+ Package(){0x0000FFFF, 2, 0, 0x12 },
+ Package(){0x0000FFFF, 3, 0, 0x13 },
+ })
+
+ Name(PBR0, Package(){
+ /* PCIx1 on SB */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(ABR0, Package(){
+ /* PCIx1 on SB */
+ Package(){0x0000FFFF, 0, 0, 0x10 },
+ Package(){0x0000FFFF, 1, 0, 0x11 },
+ Package(){0x0000FFFF, 2, 0, 0x12 },
+ Package(){0x0000FFFF, 3, 0, 0x13 },
+ })
+
+ Name(PBR1, Package(){
+ /* Onboard network */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(ABR1, Package(){
+ /* Onboard network */
+ Package(){0x0000FFFF, 0, 0, 0x11 },
+ Package(){0x0000FFFF, 1, 0, 0x12 },
+ Package(){0x0000FFFF, 2, 0, 0x13 },
+ Package(){0x0000FFFF, 3, 0, 0x10 },
+ })
+
+ /* SB PCI Bridge */
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0 behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 0x14 },
+ Package(){0x0005FFFF, 1, 0, 0x15 },
+ Package(){0x0005FFFF, 2, 0, 0x16 },
+ Package(){0x0005FFFF, 3, 0, 0x17 },
+ })
+}
diff --git a/src/mainboard/asus/f2a85-m/acpi/sata.asl b/src/mainboard/asus/f2a85-m/acpi/sata.asl
new file mode 100644
index 0000000000..c817b6efe3
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi/sata.asl
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(SATA) {
+ Name(_ADR, 0x00110000)
+ #include "sata.asl"
+ }
+ }
+}
+*/
+
+Name(STTM, Buffer(20) {
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+ \_GPE._L1F()
+}
+
+Device(PMRY)
+{
+ Name(_ADR, 0)
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(PMST) {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P0IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ }/* end of PMST */
+
+ Device(PSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P1IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of PSLA */
+} /* end of PMRY */
+
+Device(SEDY)
+{
+ Name(_ADR, 1) /* IDE Scondary Channel */
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(SMST)
+ {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P2IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SMST */
+
+ Device(SSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P3IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SSLA */
+} /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+ Method(_L1F,0x0,NotSerialized) {
+ if (\_SB.P0PR) {
+ if (LGreater(\_SB.P0IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P0PR)
+ }
+
+ if (\_SB.P1PR) {
+ if (LGreater(\_SB.P1IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P1PR)
+ }
+
+ if (\_SB.P2PR) {
+ if (LGreater(\_SB.P2IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P2PR)
+ }
+
+ if (\_SB.P3PR) {
+ if (LGreater(\_SB.P3IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P3PR)
+ }
+ }
+}
diff --git a/src/mainboard/asus/f2a85-m/acpi/usb.asl b/src/mainboard/asus/f2a85-m/acpi/usb.asl
new file mode 100644
index 0000000000..857c78f569
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi/usb.asl
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+Method(UCOC, 0) {
+ Sleep(20)
+ Store(0x13,CMTI)
+ Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+ Scope (\_GPE) {
+ Method (_L13) {
+ }
+ }
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+ Scope (\_GPE) {
+ Method (_L14) {
+ }
+ }
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+ Scope (\_GPE) {
+ Method (_L15) {
+ }
+ }
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+ Scope (\_GPE) {
+ Method (_L16) {
+ }
+ }
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+ Scope (\_GPE) {
+ Method (_L19) {
+ }
+ }
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+ Scope (\_GPE) {
+ Method (_L1A) {
+ }
+ }
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1C) { */
+ Method (_L06) {
+ }
+ }
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1D) { */
+ Method (_L07) {
+ }
+ }
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+ Scope (\_GPE) {
+ Method (_L17) {
+ }
+ }
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+ Scope (\_GPE) {
+ Method (_L0E) {
+ }
+ }
+}
diff --git a/src/mainboard/asus/f2a85-m/acpi_tables.c b/src/mainboard/asus/f2a85-m/acpi_tables.c
new file mode 100644
index 0000000000..d93fecc0f4
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/acpi_tables.c
@@ -0,0 +1,329 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include "agesawrapper.h"
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam15.h>
+
+#include "agesawrapper.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+
+static void dump_mem(u32 start, u32 end)
+{
+ u32 i;
+ print_debug("dump_mem:");
+ for (i = start; i < end; i++) {
+ if ((i & 0xf) == 0) {
+ printk(BIOS_DEBUG, "\n%08x:", i);
+ }
+ printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+ }
+ print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Just a dummy */
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write Hudson IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+ IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edige-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
+
+unsigned long acpi_fill_hest(acpi_hest_t *hest)
+{
+ void *addr, *current;
+
+ /* Skip the HEST header. */
+ current = (void *)(hest + 1);
+
+ addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE);
+ if (addr != NULL)
+ current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+ addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC);
+ if (addr != NULL)
+ current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+ return (unsigned long)current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ /* Not implemented */
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ /* No NUMA, no SRAT */
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+ int lens;
+ msr_t msr;
+ char pscope[] = "\\_SB.PCI0";
+
+ lens = acpigen_write_scope(pscope);
+ msr = rdmsr(TOP_MEM);
+ lens += acpigen_write_name_dword("TOM1", msr.lo);
+ msr = rdmsr(TOP_MEM2);
+ /*
+ * Since XP only implements parts of ACPI 2.0, we can't use a qword
+ * here.
+ * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+ * slide 22ff.
+ * Shift value right by 20 bit to make it fit into 32bit,
+ * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+ */
+ lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+ acpigen_patch_len(lens - 1);
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_srat_t *srat;
+ acpi_slit_t *slit;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+ acpi_header_t *ssdt;
+ acpi_header_t *alib;
+ acpi_header_t *ivrs;
+ acpi_hest_t *hest;
+
+ get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+ /* Align ACPI tables to 16 bytes */
+ start = ALIGN(start, 16);
+ current = start;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /* DSDT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current);
+ dsdt = (acpi_header_t *)current; /* it will used by fadt */
+ memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+ current += dsdt->length;
+ memcpy(dsdt, &AmlCode, dsdt->length);
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ /* FACS */ /* it needs 64 bit alignment */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
+ facs = (acpi_facs_t *) current; /* it will be used by fadt */
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* FADT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current);
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current);
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current);
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdp, madt);
+
+ /* HEST */
+ current = ALIGN(current, 8);
+ hest = (acpi_hest_t *)current;
+ acpi_write_hest((void *)current);
+ acpi_add_table(rsdp, (void *)current);
+ current += ((acpi_header_t *)current)->length;
+
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current);
+ ivrs = agesawrapper_getlateinitptr(PICK_IVRS);
+ if (ivrs != NULL) {
+ memcpy((void *)current, ivrs, ivrs->length);
+ ivrs = (acpi_header_t *) current;
+ current += ivrs->length;
+ acpi_add_table(rsdp, ivrs);
+ } else {
+ printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n");
+ }
+
+ /* SRAT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
+ srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+ if (srat != NULL) {
+ memcpy((void *)current, srat, srat->header.length);
+ srat = (acpi_srat_t *) current;
+ current += srat->header.length;
+ acpi_add_table(rsdp, srat);
+ } else {
+ printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n");
+ }
+
+ /* SLIT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
+ slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+ if (slit != NULL) {
+ memcpy((void *)current, slit, slit->header.length);
+ slit = (acpi_slit_t *) current;
+ current += slit->header.length;
+ acpi_add_table(rsdp, slit);
+ } else {
+ printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n");
+ }
+
+ /* ALIB */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current);
+ alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+ if (alib != NULL) {
+ memcpy((void *)current, alib, alib->length);
+ alib = (acpi_header_t *) current;
+ current += alib->length;
+ acpi_add_table(rsdp, (void *)alib);
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n");
+ }
+
+ /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */
+ /* SSDT */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
+ ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+ if (ssdt != NULL) {
+ memcpy((void *)current, ssdt, ssdt->length);
+ ssdt = (acpi_header_t *) current;
+ current += ssdt->length;
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n");
+ }
+ acpi_add_table(rsdp,ssdt);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+
+ acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR);
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+
+#if DUMP_ACPI_TABLES == 1
+ printk(BIOS_DEBUG, "rsdp\n");
+ dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+ printk(BIOS_DEBUG, "rsdt\n");
+ dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+ printk(BIOS_DEBUG, "madt\n");
+ dump_mem(madt, ((void *)madt) + madt->header.length);
+
+ printk(BIOS_DEBUG, "srat\n");
+ dump_mem(srat, ((void *)srat) + srat->header.length);
+
+ printk(BIOS_DEBUG, "slit\n");
+ dump_mem(slit, ((void *)slit) + slit->header.length);
+
+ printk(BIOS_DEBUG, "ssdt\n");
+ dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+ printk(BIOS_DEBUG, "fadt\n");
+ dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+
+ printk(BIOS_DEBUG, "hest\n");
+ dump_mem(hest, ((void *)hest) + hest->header.length);
+#endif
+
+ printk(BIOS_INFO, "ACPI: done.\n");
+ return current;
+}
diff --git a/src/mainboard/asus/f2a85-m/agesawrapper.c b/src/mainboard/asus/f2a85-m/agesawrapper.c
new file mode 100644
index 0000000000..df45148c2c
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/agesawrapper.c
@@ -0,0 +1,775 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "Fch.h"
+#include <cpu/amd/agesa/s3_resume.h>
+#include <cbmem.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+
+VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable = NULL;
+VOID *AcpiPstate = NULL;
+VOID *AcpiSrat = NULL;
+VOID *AcpiSlit = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib = NULL;
+VOID *AcpiIvrs = NULL;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+agesawrapper_amdinitcpuio (
+ VOID
+ )
+{
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /* Enable legacy video routing: D18F1xF4 VGA Enable */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
+ PciData = 1;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* The platform BIOS needs to ensure the memory ranges of Hudson legacy
+ * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
+ * set to non-posted regions.
+ */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
+ PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */
+ PciData |= 1 << 7; /* set NP (non-posted) bit */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
+ PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Map the remaining PCI hole as posted MMIO */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
+ PciData = 0x00FECF00; /* last address before non-posted range */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+ MsrReg = (MsrReg >> 8) | 3;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
+ PciData = (UINT32)MsrReg;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Send all IO (0000-FFFF) to southbridge. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
+ PciData = 0x0000F000;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
+ PciData = 0x00000003;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ Status = AGESA_SUCCESS;
+ return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+ VOID
+ )
+{
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /*
+ Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+ Address MSR register.
+ */
+ MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+ LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+ /*
+ Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+ */
+ LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+ MsrReg = MsrReg | 0x0000400000000000;
+ LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+ /* For serial port */
+ PciData = 0xFF03FFD5;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Set ROM cache onto WP to decrease post time */
+ MsrReg = (0x0100000000ull - CONFIG_ROM_SIZE) | 5ull;
+ LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+ MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CONFIG_ROM_SIZE) | 0x800ull;
+ LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+ Status = AGESA_SUCCESS;
+ return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitreset (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESET_PARAMS AmdResetParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ LibAmdMemFill (&AmdResetParams,
+ 0,
+ sizeof (AMD_RESET_PARAMS),
+ &(AmdResetParams.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+ AmdParamStruct.AllocationMethod = ByHost;
+ AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+ AmdParamStruct.NewStructPtr = &AmdResetParams;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+ AmdResetParams.HtConfig.Depth = 0;
+
+ status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+ return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitearly (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+ OemCustomizeInitEarly (AmdEarlyParamsPtr);
+
+ status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
+}
+
+UINT32 GetHeapBase(
+ AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 heap;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* Both romstage and ramstage has this S3 detect. */
+ if (acpi_get_sleep_type() == 3)
+ heap = (UINT32)cbmem_find(CBMEM_ID_RESUME_SCRATCH) + (CONFIG_HIGH_SCRATCH_MEMORY_SIZE - BIOS_HEAP_SIZE); /* base + high_stack_size */
+ else
+#endif
+ heap = BIOS_HEAP_START_ADDRESS; /* Low mem */
+
+ return heap;
+}
+
+UINT32
+agesawrapper_amdinitpost (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ UINT16 i;
+ UINT32 *HeadPtr;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_POST_PARAMS *PostParams;
+ BIOS_HEAP_MANAGER *BiosManagerPtr;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+ PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+ status = AmdInitPost (PostParams);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+ /* Initialize heap space */
+ BiosManagerPtr = (BIOS_HEAP_MANAGER *)GetHeapBase(&AmdParamStruct.StdHeader);
+
+ HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER));
+ for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++)
+ {
+ *HeadPtr = 0x00000000;
+ HeadPtr++;
+ }
+ BiosManagerPtr->StartOfAllocatedNodes = 0;
+ BiosManagerPtr->StartOfFreedNodes = 0;
+
+ return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitenv (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_ENV_PARAMS *EnvParam;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ status = AmdCreateStruct (&AmdParamStruct);
+ EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ status = AmdInitEnv (EnvParam);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus);
+ /* Initialize Subordinate Bus Number and Secondary Bus Number
+ * In platform BIOS this address is allocated by PCI enumeration code
+ Modify D1F0x18
+ */
+
+ return (UINT32)status;
+}
+
+VOID *
+agesawrapper_getlateinitptr (
+ int pick
+ )
+{
+ switch (pick) {
+ case PICK_DMI:
+ return DmiTable;
+ case PICK_PSTATE:
+ return AcpiPstate;
+ case PICK_SRAT:
+ return AcpiSrat;
+ case PICK_SLIT:
+ return AcpiSlit;
+ case PICK_WHEA_MCE:
+ return AcpiWheaMce;
+ case PICK_WHEA_CMC:
+ return AcpiWheaCmc;
+ case PICK_ALIB:
+ return AcpiAlib;
+ case PICK_IVRS:
+ return AcpiIvrs;
+ default:
+ return NULL;
+ }
+}
+
+UINT32
+agesawrapper_amdinitmid (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+
+ /* Enable MMIO on AMD CPU Address Map Controller */
+ agesawrapper_amdinitcpuio ();
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+
+ ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+ status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitlate (
+ VOID
+ )
+{
+ AGESA_STATUS Status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_LATE_PARAMS *AmdLateParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */
+ AmdCreateStruct(&AmdParamStruct);
+ AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr;
+ Status = AmdInitLate(AmdLateParams);
+ /* CDIT table is not created. */
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ DmiTable = AmdLateParams->DmiTable;
+ AcpiPstate = AmdLateParams->AcpiPState;
+ AcpiSrat = AmdLateParams->AcpiSrat;
+ AcpiSlit = AmdLateParams->AcpiSlit;
+
+ AcpiWheaMce = AmdLateParams->AcpiWheaMce;
+ AcpiWheaCmc = AmdLateParams->AcpiWheaCmc;
+ AcpiAlib = AmdLateParams->AcpiAlib;
+ AcpiIvrs = AmdLateParams->AcpiIvrs;
+
+ printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x,"
+ "AcpiSlit:%x, Mce:%x, Cmc:%x,"
+ "Alib:%x, AcpiIvrs:%x in %s\n",
+ (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat,
+ (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc,
+ (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__);
+
+ /* AmdReleaseStruct (&AmdParamStruct); */
+ return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdlaterunaptask (
+ UINT32 Func,
+ UINT32 Data,
+ VOID *ConfigPtr
+ )
+{
+ AGESA_STATUS Status;
+ AP_EXE_PARAMS ApExeParams;
+
+ LibAmdMemFill (&ApExeParams,
+ 0,
+ sizeof (AP_EXE_PARAMS),
+ &(ApExeParams.StdHeader));
+
+ ApExeParams.StdHeader.AltImageBasePtr = 0;
+ ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ ApExeParams.StdHeader.Func = 0;
+ ApExeParams.StdHeader.ImageBasePtr = 0;
+ ApExeParams.FunctionNumber = Func;
+ ApExeParams.RelatedDataBlock = ConfigPtr;
+
+ Status = AmdLateRunApTask (&ApExeParams);
+ if (Status != AGESA_SUCCESS) {
+ /* agesawrapper_amdreadeventlog(); */
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return (UINT32)Status;
+}
+
+#if CONFIG_HAVE_ACPI_RESUME
+
+UINT32 agesawrapper_amdinitresume(VOID)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESUME_PARAMS *AmdResumeParamsPtr;
+ S3_DATA_TYPE S3DataType;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0;
+ AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+ S3DataType = S3DataTypeNonVolatile;
+#if 1 /* TODO: Get the param from Nv storage. */
+ OemAgesaGetS3Info (S3DataType,
+ (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize,
+ (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage);
+#endif
+
+ status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr);
+
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
+}
+
+#ifndef __PRE_RAM__
+
+extern FCH_DATA_BLOCK InitEnvCfgDefault;
+STATIC VOID s3_resume_init_data(FCH_DATA_BLOCK *FchParams)
+{
+ FchParams->Gpp.GppLinkConfig = UserOptions.FchBldCfg->CfgFchGppLinkConfig;
+ FchParams->Gpp.PortCfg[0].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort0Present;
+ FchParams->Gpp.PortCfg[1].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort1Present;
+ FchParams->Gpp.PortCfg[2].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort2Present;
+ FchParams->Gpp.PortCfg[3].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort3Present;
+ FchParams->Gpp.PortCfg[0].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort0HotPlug;
+ FchParams->Gpp.PortCfg[1].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort1HotPlug;
+ FchParams->Gpp.PortCfg[2].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort2HotPlug;
+ FchParams->Gpp.PortCfg[3].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort3HotPlug;
+ FchParams->Gpp.GppFunctionEnable = TRUE; /* GppEnable */
+ FchParams->Gpp.GppPhyPllPowerDown = TRUE;
+ FchParams->Gpp.GppDynamicPowerSaving = TRUE;
+ FchParams->Gpp.UmiPhyPllPowerDown = TRUE;
+ FchParams->Gpp.NewGppAlgorithm = TRUE;
+ FchParams->Gpp.GppPortMinPollingTime = 40;
+
+ FchParams->Spi.SpiSpeed = 2;
+ FchParams->Ir.IrConfig = 3;
+
+ FchParams->HwAcpi.Smbus0BaseAddress = UserOptions.FchBldCfg->CfgSmbus0BaseAddress;
+ FchParams->HwAcpi.Smbus1BaseAddress = UserOptions.FchBldCfg->CfgSmbus1BaseAddress;
+ FchParams->HwAcpi.SioPmeBaseAddress = UserOptions.FchBldCfg->CfgSioPmeBaseAddress;
+ FchParams->HwAcpi.AcpiPm1EvtBlkAddr = UserOptions.FchBldCfg->CfgAcpiPm1EvtBlkAddr;
+ FchParams->HwAcpi.AcpiPm1CntBlkAddr = UserOptions.FchBldCfg->CfgAcpiPm1CntBlkAddr;
+ FchParams->HwAcpi.AcpiPmTmrBlkAddr = UserOptions.FchBldCfg->CfgAcpiPmTmrBlkAddr;
+ FchParams->HwAcpi.CpuControlBlkAddr = UserOptions.FchBldCfg->CfgCpuControlBlkAddr;
+ FchParams->HwAcpi.AcpiGpe0BlkAddr = UserOptions.FchBldCfg->CfgAcpiGpe0BlkAddr;
+ FchParams->HwAcpi.SmiCmdPortAddr = UserOptions.FchBldCfg->CfgSmiCmdPortAddr;
+ FchParams->HwAcpi.AcpiPmaCntBlkAddr = UserOptions.FchBldCfg->CfgAcpiPmaCntBlkAddr;
+ FchParams->HwAcpi.WatchDogTimerBase = UserOptions.FchBldCfg->CfgWatchDogTimerBase;
+ FchParams->Sata.SataRaid5Ssid = UserOptions.FchBldCfg->CfgSataRaid5Ssid;
+ FchParams->Sata.SataRaidSsid = UserOptions.FchBldCfg->CfgSataRaidSsid;
+ FchParams->Sata.SataAhciSsid = UserOptions.FchBldCfg->CfgSataAhciSsid;
+ FchParams->Sata.SataIdeSsid = UserOptions.FchBldCfg->CfgSataIdeSsid;
+ FchParams->Gec.GecShadowRomBase = UserOptions.FchBldCfg->CfgGecShadowRomBase;
+ FchParams->Spi.RomBaseAddress = UserOptions.FchBldCfg->CfgSpiRomBaseAddress;
+ FchParams->Sd.SdSsid = UserOptions.FchBldCfg->CfgSdSsid;
+ FchParams->Spi.LpcSsid = UserOptions.FchBldCfg->CfgLpcSsid;
+ FchParams->Hpet.HpetBase = UserOptions.FchBldCfg->CfgHpetBaseAddress;
+ FchParams->Azalia.AzaliaSsid = UserOptions.FchBldCfg->CfgAzaliaSsid;
+ FchParams->Smbus.SmbusSsid = UserOptions.FchBldCfg->CfgSmbusSsid;
+ FchParams->Ide.IdeSsid = UserOptions.FchBldCfg->CfgIdeSsid;
+ FchParams->Usb.EhciSsid = UserOptions.FchBldCfg->CfgEhciSsid;
+ FchParams->Usb.OhciSsid = UserOptions.FchBldCfg->CfgOhciSsid;
+ FchParams->Usb.XhciSsid = UserOptions.FchBldCfg->CfgXhciSsid;
+ FchParams->Ir.IrPinControl = UserOptions.FchBldCfg->CfgFchIrPinControl;
+ FchParams->Sd.SdClockControl = UserOptions.FchBldCfg->CfgFchSdClockControl;
+}
+
+UINT32 agesawrapper_fchs3earlyrestore (VOID)
+{
+ AGESA_STATUS status = AGESA_SUCCESS;
+
+ FCH_DATA_BLOCK FchParams;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+ StdHeader.AltImageBasePtr = 0;
+ StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ StdHeader.Func = 0;
+ StdHeader.ImageBasePtr = 0;
+
+ FchParams = InitEnvCfgDefault;
+ FchParams.StdHeader = &StdHeader;
+ s3_resume_init_data(&FchParams);
+
+ FchInitS3EarlyRestore(&FchParams);
+
+ return status;
+}
+#endif
+
+UINT32 agesawrapper_amds3laterestore (VOID)
+{
+ AGESA_STATUS Status;
+ AMD_INTERFACE_PARAMS AmdInterfaceParams;
+ AMD_S3LATE_PARAMS AmdS3LateParams;
+ AMD_S3LATE_PARAMS *AmdS3LateParamsPtr;
+ S3_DATA_TYPE S3DataType;
+
+ agesawrapper_amdinitcpuio();
+ LibAmdMemFill (&AmdS3LateParams,
+ 0,
+ sizeof (AMD_S3LATE_PARAMS),
+ &(AmdS3LateParams.StdHeader));
+ AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+ AmdInterfaceParams.AllocationMethod = ByHost;
+ AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE;
+ AmdInterfaceParams.NewStructPtr = &AmdS3LateParams;
+ AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdS3LateParamsPtr = &AmdS3LateParams;
+ AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS);
+
+ AmdCreateStruct (&AmdInterfaceParams);
+
+ AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+ S3DataType = S3DataTypeVolatile;
+
+#if 1 /* TODO:Get params from Volatile storage. */
+ OemAgesaGetS3Info (S3DataType,
+ (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize,
+ (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage);
+#endif
+
+ Status = AmdS3LateRestore (AmdS3LateParamsPtr);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return (UINT32)Status;
+}
+
+#ifndef __PRE_RAM__
+
+extern UINT8 picr_data[0x54], intr_data[0x54];
+
+UINT32 agesawrapper_fchs3laterestore (VOID)
+{
+ AGESA_STATUS status = AGESA_SUCCESS;
+
+ FCH_DATA_BLOCK FchParams;
+ AMD_CONFIG_PARAMS StdHeader;
+ UINT8 byte;
+
+ StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+ StdHeader.AltImageBasePtr = 0;
+ StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ StdHeader.Func = 0;
+ StdHeader.ImageBasePtr = 0;
+
+ FchParams = InitEnvCfgDefault;
+ FchParams.StdHeader = &StdHeader;
+ s3_resume_init_data(&FchParams);
+ FchInitS3LateRestore(&FchParams);
+ /* PIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+ outb(byte, 0xC00);
+ outb(picr_data[byte], 0xC01);
+ }
+
+ /* APIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
+
+ return status;
+}
+#endif
+
+#ifndef __PRE_RAM__
+
+UINT32 agesawrapper_amdS3Save(VOID)
+{
+ AGESA_STATUS Status;
+ AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr;
+ AMD_INTERFACE_PARAMS AmdInterfaceParams;
+ S3_DATA_TYPE S3DataType;
+
+ LibAmdMemFill (&AmdInterfaceParams,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdInterfaceParams.StdHeader));
+
+ AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+ AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdInterfaceParams.AllocationMethod = PostMemDram;
+ AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE;
+ AmdInterfaceParams.StdHeader.AltImageBasePtr = 0;
+ AmdInterfaceParams.StdHeader.Func = 0;
+
+ AmdCreateStruct(&AmdInterfaceParams);
+ AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr;
+ AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader;
+
+ Status = AmdS3Save(AmdS3SaveParamsPtr);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ S3DataType = S3DataTypeNonVolatile;
+ printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n",
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+#if 1 /* TODO: Save the params to NvStorage */
+ Status = OemAgesaSaveS3Info (
+ S3DataType,
+ AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+ AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+#endif
+ printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n",
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+
+ if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) {
+ S3DataType = S3DataTypeVolatile;
+
+#if 1 /* TODO: Save the params to VolatileStorage */
+ Status = OemAgesaSaveS3Info (
+ S3DataType,
+ AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+ AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage
+ );
+#endif
+ }
+ OemAgesaSaveMtrr();
+
+ AmdReleaseStruct (&AmdInterfaceParams);
+
+ return (UINT32)Status;
+}
+
+#endif /* #ifndef __PRE_RAM__ */
+#endif /* CONFIG_HAVE_ACPI_RESUME */
+
+UINT32
+agesawrapper_amdreadeventlog (
+ UINT8 HeapStatus
+ )
+{
+ AGESA_STATUS Status;
+ EVENT_PARAMS AmdEventParams;
+
+ LibAmdMemFill (&AmdEventParams,
+ 0,
+ sizeof (EVENT_PARAMS),
+ &(AmdEventParams.StdHeader));
+
+ AmdEventParams.StdHeader.AltImageBasePtr = 0;
+ AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdEventParams.StdHeader.Func = 0;
+ AmdEventParams.StdHeader.ImageBasePtr = 0;
+ AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+ Status = AmdReadEventLog (&AmdEventParams);
+ while (AmdEventParams.EventClass != 0) {
+ printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo);
+ printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2);
+ printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4);
+ Status = AmdReadEventLog (&AmdEventParams);
+ }
+
+ return (UINT32)Status;
+}
diff --git a/src/mainboard/asus/f2a85-m/agesawrapper.h b/src/mainboard/asus/f2a85-m/agesawrapper.h
new file mode 100644
index 0000000000..5007510bcf
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/agesawrapper.h
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/* Define AMD Ontario APPU SSID/SVID */
+#define AMD_APU_SVID 0x1022
+#define AMD_APU_SSID 0x1234
+#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+ PICK_DMI, /* DMI Interface */
+ PICK_PSTATE, /* Acpi Pstate SSDT Table */
+ PICK_SRAT, /* SRAT Table */
+ PICK_SLIT, /* SLIT Table */
+ PICK_WHEA_MCE, /* WHEA MCE table */
+ PICK_WHEA_CMC, /* WHEA CMV table */
+ PICK_ALIB, /* SACPI SSDT table with ALIB implementation */
+ PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */
+};
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+ UINT32 CalloutName;
+ AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+} BIOS_CALLOUT_STRUCT;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+UINT32 agesawrapper_amdinitcpuio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr);
+UINT32 agesawrapper_amdS3Save(VOID);
+UINT32 agesawrapper_amdinitresume(VOID);
+UINT32 agesawrapper_amds3laterestore (VOID);
+
+UINT32 agesawrapper_fchs3earlyrestore (VOID);
+UINT32 agesawrapper_fchs3laterestore (VOID);
+
+UINT32 GetHeapBase(AMD_CONFIG_PARAMS *StdHeader);
+
+#endif
diff --git a/src/mainboard/asus/f2a85-m/buildOpts.c b/src/mainboard/asus/f2a85-m/buildOpts.c
new file mode 100644
index 0000000000..7f893f935b
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/buildOpts.c
@@ -0,0 +1,517 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ */
+
+#include "AGESA.h"
+//#include "CommonReturns.h"
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+/* Select the cpu family. */
+#define INSTALL_FAMILY_10_SUPPORT FALSE
+#define INSTALL_FAMILY_12_SUPPORT FALSE
+#define INSTALL_FAMILY_14_SUPPORT FALSE
+#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE
+
+/* Select the cpu socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+
+#define INSTALL_FM2_SOCKET_SUPPORT TRUE
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_ECC_SUPPORT TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+#define BLDOPT_REMOVE_SRAT FALSE //TRUE
+#define BLDOPT_REMOVE_SLIT FALSE //TRUE
+#define BLDOPT_REMOVE_WHEA FALSE //TRUE
+#define BLDOPT_REMOVE_CRAT TRUE
+//#define BLDOPT_REMOVE_DMI FALSE //TRUE
+//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT 90000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE 0
+
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE FALSE
+#define BLDCFG_ECC_REDIRECTION FALSE
+#define BLDCFG_SCRUB_DRAM_RATE 0
+#define BLDCFG_SCRUB_L2_RATE 0
+#define BLDCFG_SCRUB_L3_RATE 0
+#define BLDCFG_SCRUB_IC_RATE 0
+#define BLDCFG_SCRUB_DC_RATE 0
+#define BLDCFG_ECC_SYMBOL_SIZE 4
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
+#define BLDCFG_ECC_SYNC_FLOOD FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36%
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770
+
+#define BLDOPT_REMOVE_ALIB FALSE
+#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled
+#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+
+#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200
+#define BLDCFG_CFG_ABM_SUPPORT 0
+
+//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770
+
+// Specify the default values for the VRM controlling the VDDNB plane.
+// If not specified, the values used for the core VRM will be applied
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L
+//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime
+//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity
+
+#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000
+
+#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3
+#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3
+
+#if CONFIG_GFXUMA
+#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED
+//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/
+#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#endif
+
+#define BLDCFG_IOMMU_SUPPORT FALSE
+
+#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
+//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID
+
+/* Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET TRUE
+#define AGESA_ENTRY_INIT_RECOVERY FALSE
+#define AGESA_ENTRY_INIT_EARLY TRUE
+#define AGESA_ENTRY_INIT_POST TRUE
+#define AGESA_ENTRY_INIT_ENV TRUE
+#define AGESA_ENTRY_INIT_MID TRUE
+#define AGESA_ENTRY_INIT_LATE TRUE
+#define AGESA_ENTRY_INIT_S3SAVE TRUE
+#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420
+// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000
+// #define BLDCFG_AZALIA_SSID 0x780D1022
+// #define BLDCFG_SMBUS_SSID 0x780B1022
+// #define BLDCFG_IDE_SSID 0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID 0x78011022
+// #define BLDCFG_SATA_IDE_SSID 0x78001022
+// #define BLDCFG_SATA_RAID5_SSID 0x78031022
+// #define BLDCFG_SATA_RAID_SSID 0x78021022
+// #define BLDCFG_EHCI_SSID 0x78081022
+// #define BLDCFG_OHCI_SSID 0x78071022
+// #define BLDCFG_LPC_SSID 0x780E1022
+// #define BLDCFG_SD_SSID 0x78061022
+// #define BLDCFG_XHCI_SSID 0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+ { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList
+
+//#include "VirgoInstall.h"
+
+/* Include the files that instantiate the configuration definitions. */
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+ // This is the delivery package title, "BrazosPI"
+ // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+ // This is the release version number of the AGESA component
+ // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define DDR2100_FREQUENCY 1050 ///< DDR 2100
+#define DDR2133_FREQUENCY 1066 ///< DDR 2133
+#define DDR2400_FREQUENCY 1200 ///< DDR 2400
+#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820
+#define DFLT_SPI_BASE_ADDRESS 0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS 0xFED00000
+#define DFLT_SMI_CMD_PORT 0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
+#define DFLT_GEC_BASE_ADDRESS 0xFED61000
+#define DFLT_AZALIA_SSID 0x780D1022
+#define DFLT_SMBUS_SSID 0x780B1022
+#define DFLT_IDE_SSID 0x780C1022
+#define DFLT_SATA_AHCI_SSID 0x78011022
+#define DFLT_SATA_IDE_SSID 0x78001022
+#define DFLT_SATA_RAID5_SSID 0x78031022
+#define DFLT_SATA_RAID_SSID 0x78021022
+#define DFLT_EHCI_SSID 0x78081022
+#define DFLT_OHCI_SSID 0x78071022
+#define DFLT_LPC_SSID 0x780E1022
+#define DFLT_SD_SSID 0x78061022
+#define DFLT_XHCI_SSID 0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1
+#define DFLT_FCH_GPP_PORT0_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT1_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT2_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT3_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
+//#define BLDCFG_IR_PIN_CONTROL 0x33
+//#define FCH_NO_XHCI_SUPPORT FALSE
+GPIO_CONTROL f2a85_m_gpio[] = {
+// {183, Function1, PullUpB},
+ {-1}
+};
+#define BLDCFG_FCH_GPIO_CONTROL_LIST (&f2a85_m_gpio[0])
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+#include "PlatformInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+ //
+ // The following macros are supported (use comma to separate macros):
+ //
+ // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+ // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+ // AGESA will base on this value to disable unused MemClk to save power.
+ // Example:
+ // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+ // Bit AM3/S1g3 pin name
+ // 0 M[B,A]_CLK_H/L[0]
+ // 1 M[B,A]_CLK_H/L[1]
+ // 2 M[B,A]_CLK_H/L[2]
+ // 3 M[B,A]_CLK_H/L[3]
+ // 4 M[B,A]_CLK_H/L[4]
+ // 5 M[B,A]_CLK_H/L[5]
+ // 6 M[B,A]_CLK_H/L[6]
+ // 7 M[B,A]_CLK_H/L[7]
+ // And platform has the following routing:
+ // CS0 M[B,A]_CLK_H/L[4]
+ // CS1 M[B,A]_CLK_H/L[2]
+ // CS2 M[B,A]_CLK_H/L[3]
+ // CS3 M[B,A]_CLK_H/L[5]
+ // Then platform can specify the following macro:
+ // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+ //
+ // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+ // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+ // AGESA will base on this value to tristate unused CKE to save power.
+ //
+ // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+ // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+ // AGESA will base on this value to tristate unused ODT pins to save power.
+ //
+ // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+ // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+ // AGESA will base on this value to tristate unused Chip select to save power.
+ //
+ // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+ // Specifies the number of DIMM slots per channel.
+ //
+ // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+ // Specifies the number of Chip selects per channel.
+ //
+ // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+ // Specifies the number of channels per socket.
+ //
+ // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+ // Specifies DDR bus speed of channel ChannelID on socket SocketID.
+ //
+ // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+ // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+ //
+ // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Specifies the write leveling seed for a channel of a socket.
+ //
+ // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Speicifes the HW RXEN training seed for a channel of a socket
+ //
+
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
+/*
+ TODO: is this OK for DDR3 socket FM2?
+ MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+ CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A),
+ ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00),
+ CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+ */
+ PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+#include "mm.h"
+#include "mn.h"
+
+// Customer table
+UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
+{
+ // Hardcoded Memory Training Values
+
+ // The following macro should be used to override training values for your platform
+ //
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+ //
+ // NOTE:
+ // The following training hardcode values are example values that were taken from a tilapia motherboard
+ // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
+ // the table and replace the byte lane values with your own.
+ //
+ // ------------------ BYTE LANES ----------------------
+ // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
+ // Write Data Timing
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+ // DQS Receiver Enable
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+ // Write DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+ // Read DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+ //--------------------------------------------------------------------------------------------------------------------------------------------------
+ // TABLE END
+ NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
+};
+UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]);
+
+/* ***************************************************************************
+ * Optional User code to be included into the AGESA build
+ * These may be 32-bit call-out routines...
+ */
+//AGESA_STATUS
+//AgesaReadSpd (
+// IN UINTN FcnData,
+// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
+// )
+//{
+// /* platform code to read an SPD... */
+// return Status;
+//}
diff --git a/src/mainboard/asus/f2a85-m/cmos.layout b/src/mainboard/asus/f2a85-m/cmos.layout
new file mode 100644
index 0000000000..5520564051
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/cmos.layout
@@ -0,0 +1,114 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/asus/f2a85-m/devicetree.cb b/src/mainboard/asus/f2a85-m/devicetree.cb
new file mode 100644
index 0000000000..8272964b13
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/devicetree.cb
@@ -0,0 +1,130 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+chip northbridge/amd/agesa/family15tn/root_complex
+
+ device cpu_cluster 0 on
+ chip cpu/amd/agesa/family15tn
+ device lapic 10 on end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x1022 0x1410 inherit
+ chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
+
+ chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX
+ device pci 1.1 on end # Internal Multimedia
+ device pci 2.0 on end # PCIE SLOT0 x16 blue
+ device pci 3.0 off end # unused?
+ device pci 4.0 on end # PCIE 4x black
+ device pci 5.0 off end # unused?
+ device pci 6.0 off end # unused?
+ device pci 7.0 off end # LAN
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
+
+ chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
+ device pci 10.0 on end # XHCI HC0
+ device pci 10.1 on end # XHCI HC1
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SMBUS
+ chip drivers/generic/generic #dimm 0
+ device i2c 50 on end # 7-bit SPD address
+ end
+ chip drivers/generic/generic #dimm 1
+ device i2c 51 on end # 7-bit SPD address
+ end
+ end # SM
+ device pci 14.1 off end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/ite/it8712f
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 off end # EC
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 off # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
+ end
+ device pnp 2e.8 off # MIDI
+ io 0x60 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.9 off # GAME
+ io 0x60 = 0x220
+ end
+ device pnp 2e.a off end # CIR
+ end #superio/ite/it8712f
+ end #device pci 14.3 # LPC
+ device pci 14.4 on end # PCI 0x4384 # PCI-b conflict with GPIO.
+ device pci 14.5 on end # USB 2
+ device pci 14.6 off end # Gec
+ device pci 14.7 off end
+ device pci 15.0 on end # PCIe 0 - onboard PCIe 1x
+ device pci 15.1 on end # PCIe 1 onboard gigabit
+ device pci 15.2 off end # unused
+ device pci 15.3 off end # unused
+
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+ register "gpp_configuration" = "4"
+ end #chip southbridge/amd/hudson
+
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+
+ register "spdAddrLookup" = "
+ {
+ { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+ { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
+ }"
+
+ end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
+ end #domain
+end #chip northbridge/amd/agesa/family15tn/root_complex
diff --git a/src/mainboard/asus/f2a85-m/dsdt.asl b/src/mainboard/asus/f2a85-m/dsdt.asl
new file mode 100644
index 0000000000..d9f8fa467e
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/dsdt.asl
@@ -0,0 +1,1411 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "ASUS ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include "../../../arch/x86/acpi/debug.asl" */ /* Include global debug methods if needed */
+
+ /* Data to be patched by the BIOS during POST */
+ /* FIXME the patching is not done yet! */
+ /* Memory related values */
+ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+ Name(PBLN, 0x0) /* Length of BIOS area */
+
+ Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+ Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+ Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+ Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+ /* USB overcurrent mapping pins. */
+ Name(UOM0, 0)
+ Name(UOM1, 2)
+ Name(UOM2, 0)
+ Name(UOM3, 7)
+ Name(UOM4, 2)
+ Name(UOM5, 2)
+ Name(UOM6, 6)
+ Name(UOM7, 2)
+ Name(UOM8, 6)
+ Name(UOM9, 6)
+
+ /* Some global data */
+ Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PMOD, One) /* Assume APIC */
+
+ /*
+ * Processor Object
+ *
+ */
+ Scope (\_PR) { /* define processor scope */
+ Processor(
+ P000, /* name space name */
+ 0, /* Unique number for this processor */
+ 0x810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+
+ Processor(
+ P001, /* name space name */
+ 1, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ Processor(
+ P002, /* name space name */
+ 2, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ Processor(
+ P003, /* name space name */
+ 3, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ Processor(
+ P004, /* name space name */
+ 4, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ Processor(
+ P005, /* name space name */
+ 5, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ Processor(
+ P006, /* name space name */
+ 6, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ Processor(
+ P007, /* name space name */
+ 7, /* Unique number for this processor */
+ 0x0810, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ }
+ } /* End _PR scope */
+
+ /* PIC IRQ mapping registers, C00h-C01h. */
+ OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+ Field(PRQM, ByteAcc, NoLock, Preserve) {
+ PRQI, 0x00000008,
+ PRQD, 0x00000008, /* Offset: 1h */
+ }
+ IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+ PIRA, 0x00000008, /* Index 0 */
+ PIRB, 0x00000008, /* Index 1 */
+ PIRC, 0x00000008, /* Index 2 */
+ PIRD, 0x00000008, /* Index 3 */
+ PIRE, 0x00000008, /* Index 4 */
+ PIRF, 0x00000008, /* Index 5 */
+ PIRG, 0x00000008, /* Index 6 */
+ PIRH, 0x00000008, /* Index 7 */
+ }
+
+ /* PCI Error control register */
+ OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+ Field(PERC, ByteAcc, NoLock, Preserve) {
+ SENS, 0x00000001,
+ PENS, 0x00000001,
+ SENE, 0x00000001,
+ PENE, 0x00000001,
+ }
+
+ /* Client Management index/data registers */
+ OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+ Field(CMT, ByteAcc, NoLock, Preserve) {
+ CMTI, 8,
+ /* Client Management Data register */
+ G64E, 1,
+ G64O, 1,
+ G32O, 2,
+ , 2,
+ GPSL, 2,
+ }
+
+ /* GPM Port register */
+ OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+ Field(GPT, ByteAcc, NoLock, Preserve) {
+ GPB0,1,
+ GPB1,1,
+ GPB2,1,
+ GPB3,1,
+ GPB4,1,
+ GPB5,1,
+ GPB6,1,
+ GPB7,1,
+ }
+
+ /* Flash ROM program enable register */
+ OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+ Field(FRE, ByteAcc, NoLock, Preserve) {
+ , 0x00000006,
+ FLRE, 0x00000001,
+ }
+
+ /* PM2 index/data registers */
+ OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+ Field(PM2R, ByteAcc, NoLock, Preserve) {
+ PM2I, 0x00000008,
+ PM2D, 0x00000008,
+ }
+
+ /* Power Management I/O registers. */
+ OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+ Field(PIOR, ByteAcc, NoLock, Preserve) {
+ PIOI, 0x00000008,
+ PIOD, 0x00000008,
+ }
+ IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+ Offset(0xEE),
+ UPWS, 3,
+ }
+
+ /* PM1 Event Block
+ * First word is PM1_Status, Second word is PM1_Enable
+ */
+ Scope(\_SB) {
+ /* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
+ OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
+ Field(PCFG, ByteAcc, NoLock, Preserve) {
+ /* Byte offsets are computed using the following technique:
+ * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+ * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+ */
+ Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+ STB5, 32,
+ Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+ PT0D, 1,
+ PT1D, 1,
+ PT2D, 1,
+ PT3D, 1,
+ PT4D, 1,
+ PT5D, 1,
+ PT6D, 1,
+ PT7D, 1,
+ PT8D, 1,
+ PT9D, 1,
+ Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
+ SBIE, 1,
+ SBME, 1,
+ Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
+ SBRI, 8,
+ Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
+ SBB1, 32,
+ Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
+ ,14,
+ P92E, 1, /* Port92 decode enable */
+ }
+
+ OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+ Field(SB5, AnyAcc, NoLock, Preserve){
+ /* Port 0 */
+ Offset(0x120), /* Port 0 Task file status */
+ P0ER, 1,
+ , 2,
+ P0DQ, 1,
+ , 3,
+ P0BY, 1,
+ Offset(0x128), /* Port 0 Serial ATA status */
+ P0DD, 4,
+ , 4,
+ P0IS, 4,
+ Offset(0x12C), /* Port 0 Serial ATA control */
+ P0DI, 4,
+ Offset(0x130), /* Port 0 Serial ATA error */
+ , 16,
+ P0PR, 1,
+
+ /* Port 1 */
+ offset(0x1A0), /* Port 1 Task file status */
+ P1ER, 1,
+ , 2,
+ P1DQ, 1,
+ , 3,
+ P1BY, 1,
+ Offset(0x1A8), /* Port 1 Serial ATA status */
+ P1DD, 4,
+ , 4,
+ P1IS, 4,
+ Offset(0x1AC), /* Port 1 Serial ATA control */
+ P1DI, 4,
+ Offset(0x1B0), /* Port 1 Serial ATA error */
+ , 16,
+ P1PR, 1,
+
+ /* Port 2 */
+ Offset(0x220), /* Port 2 Task file status */
+ P2ER, 1,
+ , 2,
+ P2DQ, 1,
+ , 3,
+ P2BY, 1,
+ Offset(0x228), /* Port 2 Serial ATA status */
+ P2DD, 4,
+ , 4,
+ P2IS, 4,
+ Offset(0x22C), /* Port 2 Serial ATA control */
+ P2DI, 4,
+ Offset(0x230), /* Port 2 Serial ATA error */
+ , 16,
+ P2PR, 1,
+
+ /* Port 3 */
+ Offset(0x2A0), /* Port 3 Task file status */
+ P3ER, 1,
+ , 2,
+ P3DQ, 1,
+ , 3,
+ P3BY, 1,
+ Offset(0x2A8), /* Port 3 Serial ATA status */
+ P3DD, 4,
+ , 4,
+ P3IS, 4,
+ Offset(0x2AC), /* Port 3 Serial ATA control */
+ P3DI, 4,
+ Offset(0x2B0), /* Port 3 Serial ATA error */
+ , 16,
+ P3PR, 1,
+ }
+ }
+
+ #include "acpi/routing.asl"
+
+ Scope(\_SB) {
+
+ Method(CkOT, 0){
+
+ if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
+
+ if(CondRefOf(\_OSI,Local1))
+ {
+ Store(1, OSTP) /* Assume some form of XP */
+ if (\_OSI("Windows 2006")) /* Vista */
+ {
+ Store(2, OSTP)
+ }
+ } else {
+ If(WCMP(\_OS,"Linux")) {
+ Store(3, OSTP) /* Linux */
+ } Else {
+ Store(4, OSTP) /* Gotta be WinCE */
+ }
+ }
+ Return(OSTP)
+ }
+
+ Method(_PIC, 0x01, NotSerialized)
+ {
+ If (Arg0)
+ {
+ \_SB.CIRQ()
+ }
+ Store(Arg0, PMOD)
+ }
+ Method(CIRQ, 0x00, NotSerialized){
+ //Store(0, PIRA)
+ //Store(0, PIRB)
+ //Store(0, PIRC)
+ //Store(0, PIRD)
+ //Store(0, PIRE)
+ //Store(0, PIRF)
+ //Store(0, PIRG)
+ //Store(0, PIRH)
+ }
+
+ Name(IRQB, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Shared){15}
+ })
+
+ Name(IRQP, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+ })
+
+ Name(PITF, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){9}
+ })
+
+ Device(INTA) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 1)
+
+ Method(_STA, 0) {
+ if (PIRA) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTA._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_DIS\n") */
+ //Store(0x1F, PIRA)
+ } /* End Method(_SB.INTA._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTA._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRA, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTA._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ //Store(Local0, PIRA)
+ } /* End Method(_SB.INTA._SRS) */
+ } /* End Device(INTA) */
+
+ Device(INTB) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 2)
+
+ Method(_STA, 0) {
+ if (PIRB) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTB._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_DIS\n") */
+ //Store(0, PIRB)
+ } /* End Method(_SB.INTB._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTB._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRB, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTB._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRB)
+ } /* End Method(_SB.INTB._SRS) */
+ } /* End Device(INTB) */
+
+ Device(INTC) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 3)
+
+ Method(_STA, 0) {
+ if (PIRC) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTC._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_DIS\n") */
+ //Store(0, PIRC)
+ } /* End Method(_SB.INTC._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTC._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRC, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTC._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRC)
+ } /* End Method(_SB.INTC._SRS) */
+ } /* End Device(INTC) */
+
+ Device(INTD) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 4)
+
+ Method(_STA, 0) {
+ if (PIRD) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTD._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_DIS\n") */
+ //Store(0, PIRD)
+ } /* End Method(_SB.INTD._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTD._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRD, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTD._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRD)
+ } /* End Method(_SB.INTD._SRS) */
+ } /* End Device(INTD) */
+
+ Device(INTE) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 5)
+
+ Method(_STA, 0) {
+ if (PIRE) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTE._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_DIS\n") */
+ //Store(0, PIRE)
+ } /* End Method(_SB.INTE._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTE._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRE, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTE._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRE)
+ } /* End Method(_SB.INTE._SRS) */
+ } /* End Device(INTE) */
+
+ Device(INTF) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 6)
+
+ Method(_STA, 0) {
+ if (PIRF) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTF._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_DIS\n") */
+ //Store(0, PIRF)
+ } /* End Method(_SB.INTF._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_PRS\n") */
+ Return(PITF)
+ } /* Method(_SB.INTF._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRF, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTF._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRF)
+ } /* End Method(_SB.INTF._SRS) */
+ } /* End Device(INTF) */
+
+ Device(INTG) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 7)
+
+ Method(_STA, 0) {
+ if (PIRG) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTG._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_DIS\n") */
+ //Store(0, PIRG)
+ } /* End Method(_SB.INTG._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRG, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRG)
+ } /* End Method(_SB.INTG._SRS) */
+ } /* End Device(INTG) */
+
+ Device(INTH) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 8)
+
+ Method(_STA, 0) {
+ if (PIRH) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTH._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_DIS\n") */
+ //Store(0, PIRH)
+ } /* End Method(_SB.INTH._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRH, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ //Store(Local0, PIRH)
+ } /* End Method(_SB.INTH._SRS) */
+ } /* End Device(INTH) */
+
+ } /* End Scope(_SB) */
+
+ /* Supported sleep states: */
+ Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
+
+ If (LAnd(SSFG, 0x01)) {
+ Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
+ }
+ If (LAnd(SSFG, 0x02)) {
+ Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
+ }
+ If (LAnd(SSFG, 0x04)) {
+ Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
+ }
+ If (LAnd(SSFG, 0x08)) {
+ Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
+ }
+
+ Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
+
+ Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+ Name(CSMS, 0) /* Current System State */
+
+ /* Wake status package */
+ Name(WKST,Package(){Zero, Zero})
+
+ /*
+ * \_PTS - Prepare to Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2, etc
+ *
+ * Exit:
+ * -none-
+ *
+ * The _PTS control method is executed at the beginning of the sleep process
+ * for S1-S5. The sleeping value is passed to the _PTS control method. This
+ * control method may be executed a relatively long time before entering the
+ * sleep state and the OS may abort the operation without notification to
+ * the ACPI driver. This method cannot modify the configuration or power
+ * state of any device in the system.
+ */
+ Method(_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Don't allow PCIRST# to reset USB */
+ //if (LEqual(Arg0,3)){
+ // Store(0,URRE)
+ //}
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ Store(7, UPWS)
+ } /* End Method(\_PTS) */
+
+ /*
+ * The following method results in a "not a valid reserved NameSeg"
+ * warning so I have commented it out for the duration. It isn't
+ * used, so it could be removed.
+ *
+ *
+ * \_GTS OEM Going To Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * -none-
+ *
+ * Method(\_GTS, 1) {
+ * DBGO("\\_GTS\n")
+ * DBGO("From S0 to S")
+ * DBGO(Arg0)
+ * DBGO("\n")
+ * }
+ */
+
+ /*
+ * \_BFS OEM Back From Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * -none-
+ */
+ Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+ }
+
+ /*
+ * \_WAK System Wake method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * Return package of 2 DWords
+ * Dword 1 - Status
+ * 0x00000000 wake succeeded
+ * 0x00000001 Wake was signaled but failed due to lack of power
+ * 0x00000002 Wake was signaled but failed due to thermal condition
+ * Dword 2 - Power Supply state
+ * if non-zero the effective S-state the power supply entered
+ */
+ Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ //Store(1,HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ //if (LEqual(Arg0,3)){
+ // Store(1,URRE)
+ //}
+
+ /* Arbitrarily clear PciExpWakeStatus */
+ //Store(PWST, PWST)
+
+ /* if(DeRefOf(Index(WKST,0))) {
+ * Store(0, Index(WKST,1))
+ * } else {
+ * Store(Arg0, Index(WKST,1))
+ * }
+ */
+ Return(WKST)
+ } /* End Method(\_WAK) */
+
+ Scope(\_GPE) { /* Start Scope GPE */
+ /* General event 0 */
+ /* Method(_L00) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 1 */
+ /* Method(_L01) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 2 */
+ /* Method(_L02) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* General event 4 */
+ /* Method(_L04) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 5 */
+ /* Method(_L05) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 6 - Used for GPM6, moved to USB.asl */
+ /* Method(_L06) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 7 - Used for GPM7, moved to USB.asl */
+ /* Method(_L07) {
+ * DBGO("\\_GPE\\_L07\n")
+ * }
+ */
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* Reserved */
+ /* Method(_L0A) {
+ * DBGO("\\_GPE\\_L0A\n")
+ * }
+ */
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* AC97 controller PME# */
+ /* Method(_L0C) {
+ * DBGO("\\_GPE\\_L0C\n")
+ * }
+ */
+
+ /* OtherTherm PME# */
+ /* Method(_L0D) {
+ * DBGO("\\_GPE\\_L0D\n")
+ * }
+ */
+
+ /* GPM9 SCI event - Moved to USB.asl */
+ /* Method(_L0E) {
+ * DBGO("\\_GPE\\_L0E\n")
+ * }
+ */
+
+ /* PCIe HotPlug event */
+ /* Method(_L0F) {
+ * DBGO("\\_GPE\\_L0F\n")
+ * }
+ */
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* PCIe PME# event */
+ /* Method(_L12) {
+ * DBGO("\\_GPE\\_L12\n")
+ * }
+ */
+
+ /* GPM0 SCI event - Moved to USB.asl */
+ /* Method(_L13) {
+ * DBGO("\\_GPE\\_L13\n")
+ * }
+ */
+
+ /* GPM1 SCI event - Moved to USB.asl */
+ /* Method(_L14) {
+ * DBGO("\\_GPE\\_L14\n")
+ * }
+ */
+
+ /* GPM2 SCI event - Moved to USB.asl */
+ /* Method(_L15) {
+ * DBGO("\\_GPE\\_L15\n")
+ * }
+ */
+
+ /* GPM3 SCI event - Moved to USB.asl */
+ /* Method(_L16) {
+ * DBGO("\\_GPE\\_L16\n")
+ * }
+ */
+
+ /* GPM8 SCI event - Moved to USB.asl */
+ /* Method(_L17) {
+ * DBGO("\\_GPE\\_L17\n")
+ * }
+ */
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+#if 0
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+#endif
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM4 SCI event - Moved to USB.asl */
+ /* Method(_L19) {
+ * DBGO("\\_GPE\\_L19\n")
+ * }
+ */
+
+ /* GPM5 SCI event - Moved to USB.asl */
+ /* Method(_L1A) {
+ * DBGO("\\_GPE\\_L1A\n")
+ * }
+ */
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM6 SCI event - Reassigned to _L06 */
+ /* Method(_L1C) {
+ * DBGO("\\_GPE\\_L1C\n")
+ * }
+ */
+
+ /* GPM7 SCI event - Reassigned to _L07 */
+ /* Method(_L1D) {
+ * DBGO("\\_GPE\\_L1D\n")
+ * }
+ */
+
+ /* GPIO2 or GPIO66 SCI event */
+ /* Method(_L1E) {
+ * DBGO("\\_GPE\\_L1E\n")
+ * }
+ */
+
+ /* SATA SCI event - Moved to sata.asl */
+ /* Method(_L1F) {
+ * DBGO("\\_GPE\\_L1F\n")
+ * }
+ */
+
+ } /* End Scope GPE */
+
+ //#include "acpi/usb.asl"
+
+ /* System Bus */
+ Scope(\_SB) { /* Start \_SB scope */
+ #include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+
+ /* _SB.PCI0 */
+ /* Note: Only need HID on Primary Bus */
+ Device(PCI0) {
+ External (TOM1)
+ External (TOM2)
+ Name(_HID, EISAID("PNP0A03"))
+ Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
+ Method(_BBN, 0) { /* Bus number = 0 */
+ Return(0)
+ }
+ Method(_STA, 0) {
+ /* DBGO("\\_SB\\PCI0\\_STA\n") */
+ Return(0x0B) /* Status is visible */
+ }
+
+ Method(_PRT,0) {
+ If(PMOD){ Return(APR0) } /* APIC mode */
+ Return (PR0) /* PIC Mode */
+ } /* end _PRT */
+
+ /* Describe the Northbridge devices Dev0 ,Func0*/
+ Device(AMRT) {
+ Name(_ADR, 0x00000000)
+ } /* end AMRT */
+
+ /* Dev2 is also an external GFX bridge */
+ Device(PBR2) {
+ Name(_ADR, 0x00020000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS2) } /* APIC mode */
+ Return (PS2) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR2 */
+
+ Device(PBR4) {
+ Name(_ADR, 0x00040000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS4) } /* APIC mode */
+ Return (PS4) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR4 */
+
+ /* PCI slot 1, 2, 3 */
+ Device(PIBR) {
+ Name(_ADR, 0x00140004)
+ Name(_PRW, Package() {0x18, 4})
+ /* TODO: non APIC rounting */
+ Method(_PRT,0) {
+ Return (PCIB)
+ }
+ }
+
+ /* Describe the Southbridge devices */
+ /* PCIe 1x SB */
+ Device(SBR0) {
+ Name(_ADR, 0x00150000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(ABR0) } /* APIC mode */
+ Return (PBR0) /* PIC Mode */
+ } /* end _PRT */
+ } /* end SBR0 */
+
+
+ /* Onboard network */
+ Device(SBR1) {
+ Name(_ADR, 0x00150001)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT, 0) {
+ If(PMOD){ Return(ABR1) } /* APIC mode */
+ Return (PBR1) /* PIC Mode */
+ } /* end _PRT */
+ } /* end SBR1 */
+
+ Device(STCR) {
+ Name(_ADR, 0x00110000)
+ //#include "acpi/sata.asl"
+ } /* end STCR */
+
+ Device(UOH1) {
+ Name(_ADR, 0x00120000)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH1 */
+
+ Device(UOH2) {
+ Name(_ADR, 0x00120002)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH2 */
+
+ Device(UOH3) {
+ Name(_ADR, 0x00130000)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH3 */
+
+ Device(UOH4) {
+ Name(_ADR, 0x00130002)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH4 */
+
+ Device(UOH5) {
+ Name(_ADR, 0x00160000)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH5 */
+
+ Device(UOH6) {
+ Name(_ADR, 0x00160002)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH5 */
+
+ Device(UEH1) {
+ Name(_ADR, 0x00140005)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UEH1 */
+
+ Device(XHC0) {
+ Name(_ADR, 0x00100000)
+ Name(_PRW, Package() {0x0B, 4})
+ } /* end XHC0 */
+ Device(XHC1) {
+ Name(_ADR, 0x00100001)
+ Name(_PRW, Package() {0x0B, 4})
+ } /* end XHC1 */
+
+ Device(SBUS) {
+ Name(_ADR, 0x00140000)
+ } /* end SBUS */
+
+ /* Primary (and only) IDE channel */
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ //#include "acpi/ide.asl"
+ } /* end IDEC */
+
+ Device(AZHD) {
+ Name(_ADR, 0x00140002)
+ OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+ Field(AZPD, AnyAcc, NoLock, Preserve) {
+ offset (0x42),
+ NSDI, 1,
+ NSDO, 1,
+ NSEN, 1,
+ offset (0x44),
+ IPCR, 4,
+ offset (0x54),
+ PWST, 2,
+ , 6,
+ PMEB, 1,
+ , 6,
+ PMST, 1,
+ offset (0x62),
+ MMCR, 1,
+ offset (0x64),
+ MMLA, 32,
+ offset (0x68),
+ MMHA, 32,
+ offset (0x6C),
+ MMDT, 16,
+ }
+
+ Method(_INI) {
+ If(LEqual(OSTP,3)){ /* If we are running Linux */
+ Store(zero, NSEN)
+ Store(one, NSDO)
+ Store(one, NSDI)
+ }
+ }
+ } /* end AZHD */
+
+ Device(LIBR) {
+ Name(_ADR, 0x00140003)
+ /* Method(_INI) {
+ * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+ } */ /* End Method(_SB.SBRDG._INI) */
+
+ /* Real Time Clock Device */
+ Device(RTC0) {
+ Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){8}
+ IO(Decode16,0x0070, 0x0070, 0, 2)
+ /* IO(Decode16,0x0070, 0x0070, 0, 4) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+ Device(TMR) { /* Timer */
+ Name(_HID,EISAID("PNP0100")) /* System Timer */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){0}
+ IO(Decode16, 0x0040, 0x0040, 0, 4)
+ /* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+ Device(SPKR) { /* Speaker */
+ Name(_HID,EISAID("PNP0800")) /* AT style speaker */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x0061, 0x0061, 0, 1)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+ Device(PIC) {
+ Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){2}
+ IO(Decode16,0x0020, 0x0020, 0, 2)
+ IO(Decode16,0x00A0, 0x00A0, 0, 2)
+ /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+ /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+ Device(MAD) { /* 8257 DMA */
+ Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
+ Name(_CRS, ResourceTemplate() {
+ DMA(Compatibility,BusMaster,Transfer8){4}
+ IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+ IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+ IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+ IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+ IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+ IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+ }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+ } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+ Device(COPR) {
+ Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+ IRQNoFlags(){13}
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+ } /* end LIBR */
+
+ Device(HPBR) {
+ Name(_ADR, 0x00140004)
+ } /* end HostPciBr */
+
+ Device(ACAD) {
+ Name(_ADR, 0x00140005)
+ } /* end Ac97audio */
+
+ Device(ACMD) {
+ Name(_ADR, 0x00140006)
+ } /* end Ac97modem */
+
+ Name(CRES, ResourceTemplate() {
+ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x0CF7, /* range maximum */
+ 0x0000, /* translation */
+ 0x0CF8 /* length */
+ )
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x03B0, /* range minimum */
+ 0x03DF, /* range maximum */
+ 0x0000, /* translation */
+ 0x0030 /* length */
+ )
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0D00, /* range minimum */
+ 0xFFFF, /* range maximum */
+ 0x0000, /* translation */
+ 0xF300 /* length */
+ )
+
+ Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
+ Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
+ /* memory space for PCI BARs below 4GB */
+ Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
+ }) /* End Name(_SB.PCI0.CRES) */
+
+ Method(_CRS, 0) {
+ /* DBGO("\\_SB\\PCI0\\_CRS\n") */
+ CreateDWordField(CRES, ^MMIO._BAS, MM1B)
+ CreateDWordField(CRES, ^MMIO._LEN, MM1L)
+ /*
+ * Declare memory between TOM1 and 4GB as available
+ * for PCI MMIO.
+ * Use ShiftLeft to avoid 64bit constant (for XP).
+ * This will work even if the OS does 32bit arithmetic, as
+ * 32bit (0x00000000 - TOM1) will wrap and give the same
+ * result as 64bit (0x100000000 - TOM1).
+ */
+ Store(TOM1, MM1B)
+ ShiftLeft(0x10000000, 4, Local0)
+ Subtract(Local0, TOM1, Local0)
+ Store(Local0, MM1L)
+
+ Return(CRES) /* note to change the Name buffer */
+ } /* end of Method(_SB.PCI0._CRS) */
+
+ /*
+ *
+ * FIRST METHOD CALLED UPON BOOT
+ *
+ * 1. If debugging, print current OS and ACPI interpreter.
+ * 2. Get PCI Interrupt routing from ACPI VSM, this
+ * value is based on user choice in BIOS setup.
+ */
+ Method(_INI, 0) {
+ /* DBGO("\\_SB\\_INI\n") */
+ /* DBGO(" DSDT.ASL code from ") */
+ /* DBGO(__DATE__) */
+ /* DBGO(" ") */
+ /* DBGO(__TIME__) */
+ /* DBGO("\n Sleep states supported: ") */
+ /* DBGO("\n") */
+ /* DBGO(" \\_OS=") */
+ /* DBGO(\_OS) */
+ /* DBGO("\n \\_REV=") */
+ /* DBGO(\_REV) */
+ /* DBGO("\n") */
+
+ /* Determine the OS we're running on */
+ CkOT()
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\SBRI, 0x13)) {
+ * Store(0,\PWDE)
+ * }
+ */
+ } /* End Method(_SB._INI) */
+ } /* End Device(PCI0) */
+
+ Device(PWRB) { /* Start Power button device */
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
+ Name(_STA, 0x0B) /* sata is invisible */
+ }
+ } /* End \_SB scope */
+
+ Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+ } /* End Scope SI */
+}
+/* End of ASL file */
diff --git a/src/mainboard/asus/f2a85-m/get_bus_conf.c b/src/mainboard/asus/f2a85-m/get_bus_conf.c
new file mode 100644
index 0000000000..3ae4c18195
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/get_bus_conf.c
@@ -0,0 +1,139 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/amdfam14.h>
+#include "agesawrapper.h"
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_hudson[3];
+u32 apicid_hudson;
+
+/*
+ * Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ * You may need to preset pci1234 for HTIO board,
+ * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ */
+u32 pci1234x[] = {
+ 0x0000ff0,
+};
+
+u32 bus_type[256];
+u32 sbdn_hudson;
+
+static u32 get_bus_conf_done = 0;
+
+#if CONFIG_HAVE_ACPI_RESUME
+extern u8 acpi_slp_type;
+#endif
+void get_bus_conf(void)
+{
+ u32 apicid_base;
+ u32 status;
+
+ device_t dev;
+ int i, j;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+
+ get_bus_conf_done = 1;
+
+ /*
+ * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
+ * but functionally within the coreboot model, this is the best place to make the
+ * call. The logically correct place to call AmdInitLate is after PCI scan is done,
+ * after the decision about S3 resume is made, and before the system tables are
+ * written into RAM. The routine that is responsible for writing the tables is
+ * "write_tables", called near the end of "hardwaremain". There is no platform
+ * specific entry point between the S3 resume decision point and the call to
+ * "write_tables", and the next platform specific entry points are the calls to
+ * the ACPI table write functions. The first of ose would seem to be the right
+ * place, but other table write functions, e.g. the PIRQ table write function, are
+ * called before the ACPI tables are written. This routine is called at the beginning
+ * of each of the write functions called prior to the ACPI write functions, so this
+ * becomes the best place for this call.
+ */
+#if CONFIG_HAVE_ACPI_RESUME
+ if (acpi_slp_type != 3) {
+ status = agesawrapper_amdinitlate();
+ if(status) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+ }
+ status = agesawrapper_amdS3Save();
+ if (status) {
+ printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status);
+ }
+ }
+#else
+ status = agesawrapper_amdinitlate();
+ if (status)
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+#endif
+
+ sbdn_hudson = 0;
+
+ for (i = 0; i < 3; i++) {
+ bus_hudson[i] = 0;
+ }
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+ bus_hudson[0] = (pci1234x[0] >> 16) & 0xff;
+
+ /* Hudson */
+ dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4));
+
+ if (dev) {
+ bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_hudson[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ for (i = 0; i < 4; i++) {
+ dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i));
+ if (dev) {
+ bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ }
+ for (j = bus_hudson[2]; j < bus_isa; j++)
+ bus_type[j] = 1;
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+ apicid_base = CONFIG_MAX_CPUS;
+ apicid_hudson = apicid_base;
+}
diff --git a/src/mainboard/asus/f2a85-m/irq_tables.c b/src/mainboard/asus/f2a85-m/irq_tables.c
new file mode 100644
index 0000000000..d7e223bb93
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/irq_tables.c
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam15.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+extern u8 bus_isa;
+extern u8 bus_hudson[2];
+extern unsigned long sbdn_hudson;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_hudson[0];
+ pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4,
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/asus/f2a85-m/mainboard.c b/src/mainboard/asus/f2a85-m/mainboard.c
new file mode 100644
index 0000000000..266c8138a0
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/mainboard.c
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include "BiosCallOuts.h"
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <arch/acpi.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include "agesawrapper.h"
+
+/*************************************************
+ * enable the dedicated function in thatcher board.
+ *************************************************/
+static void mainboard_enable(device_t dev)
+{
+ msr_t msr;
+
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+ msr = rdmsr(0xC0011020);
+ msr.lo &= ~(1 << 28);
+ wrmsr(0xC0011020, msr);
+
+ msr = rdmsr(0xC0011022);
+ msr.lo &= ~(1 << 4);
+ msr.lo &= ~(1 << 13);
+ wrmsr(0xC0011022, msr);
+
+ msr = rdmsr(0xC0011023);
+ msr.lo &= ~(1 << 23);
+ wrmsr(0xC0011023, msr);
+
+ /*
+ * The mainboard is the first place that we get control in ramstage. Check
+ * for S3 resume and call the approriate AGESA/CIMx resume functions.
+ */
+#if CONFIG_HAVE_ACPI_RESUME
+ acpi_slp_type = acpi_get_sleep_type();
+ if (acpi_slp_type == 3)
+ agesawrapper_fchs3earlyrestore();
+
+#endif
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/asus/f2a85-m/mptable.c b/src/mainboard/asus/f2a85-m/mptable.c
new file mode 100644
index 0000000000..5b6136cc67
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/mptable.c
@@ -0,0 +1,195 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include "southbridge/amd/agesa/hudson/hudson.h"
+
+
+//-#define IO_APIC_ID CONFIG_MAX_PHYSICAL_CPUS + 1
+#define IO_APIC_ID CONFIG_MAX_CPUS
+extern u8 bus_hudson[3];
+
+extern u32 bus_type[256];
+extern u32 sbdn_hudson;
+extern u32 apicid_hudson;
+
+u8 picr_data[] = {
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F
+};
+u8 intr_data[0x54] = {
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x10,0x11,0x12,0x13
+};
+
+static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
+{
+ mc->mpc_length += length;
+ mc->mpc_entry_count++;
+}
+
+static void my_smp_write_bus(struct mp_config_table *mc,
+ unsigned char id, const char *bustype)
+{
+ struct mpc_config_bus *mpc;
+ mpc = smp_next_mpc_entry(mc);
+ memset(mpc, '\0', sizeof(*mpc));
+ mpc->mpc_type = MP_BUS;
+ mpc->mpc_busid = id;
+ memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
+ smp_add_mpc_entry(mc, sizeof(*mpc));
+}
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+ u32 dword;
+ u8 byte;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+ memcpy(mc->mpc_oem, "AMD ", 8);
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+ //mptable_write_buses(mc, NULL, &bus_isa);
+ my_smp_write_bus(mc, 0, "PCI ");
+ my_smp_write_bus(mc, 1, "PCI ");
+ bus_isa = 0x02;
+ my_smp_write_bus(mc, bus_isa, "ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+
+ dword = 0;
+ dword = pm_ioread(0x34) & 0xF0;
+ dword |= (pm_ioread(0x35) & 0xFF) << 8;
+ dword |= (pm_ioread(0x36) & 0xFF) << 16;
+ dword |= (pm_ioread(0x37) & 0xFF) << 24;
+ /* Set IO APIC ID onto IO_APIC_ID */
+ write32 (dword, 0x00);
+ write32 (dword + 0x10, IO_APIC_ID << 24);
+ apicid_hudson = IO_APIC_ID;
+ smp_write_ioapic(mc, apicid_hudson, 0x21, dword);
+
+ /* PIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+ outb(byte, 0xC00);
+ outb(picr_data[byte], 0xC01);
+ }
+
+ /* APIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ mptable_add_isa_interrupts(mc, bus_isa, apicid_hudson, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, int_sign, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_hudson, (pin))
+
+ /* Internal VGA */
+ PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+
+ /* SMBUS */
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+ /* HD Audio */
+ PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
+ PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+ PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+ PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+ PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+ /* on board NIC & Slot PCIE. */
+
+ /* PCI slots */
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_hudson[1], 0x5, 0x0, 0x14);
+ PCI_INT(bus_hudson[1], 0x5, 0x1, 0x15);
+ PCI_INT(bus_hudson[1], 0x5, 0x2, 0x16);
+ PCI_INT(bus_hudson[1], 0x5, 0x3, 0x17);
+
+ PCI_INT(bus_hudson[2], 0x0, 0x0, 0x12);
+ PCI_INT(bus_hudson[2], 0x0, 0x1, 0x13);
+ PCI_INT(bus_hudson[2], 0x0, 0x2, 0x14);
+
+ /* PCIe Lan*/
+ PCI_INT(0x0, 0x06, 0x0, 0x13);
+
+ /* FCH PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, 0x10);
+ /* FCH PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, 0x11);
+ /* FCH PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, 0x12);
+ /* FCH PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/asus/f2a85-m/pmio.h b/src/mainboard/asus/f2a85-m/pmio.h
new file mode 100644
index 0000000000..35751f5035
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/pmio.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _PMIO_H_
+#define _PMIO_H_
+
+#define PM_INDEX 0xCD6
+#define PM_DATA 0xCD7
+#define PM2_INDEX 0xCD0
+#define PM2_DATA 0xCD1
+
+void pm_iowrite(u8 reg, u8 value);
+u8 pm_ioread(u8 reg);
+void pm2_iowrite(u8 reg, u8 value);
+u8 pm2_ioread(u8 reg);
+
+#endif
diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c
new file mode 100644
index 0000000000..c2fc75eff5
--- /dev/null
+++ b/src/mainboard/asus/f2a85-m/romstage.c
@@ -0,0 +1,205 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2012 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#include "agesawrapper.h"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "southbridge/amd/agesa/hudson/hudson.h"
+#include "southbridge/amd/agesa/hudson/smbus.h"
+#include "superio/ite/it8712f/early_serial.c"
+#include "cpu/amd/agesa/s3_resume.h"
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include "cbmem.h"
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
+void disable_cache_as_ram(void);
+
+#define MMIO_NON_POSTED_START 0xfed00000
+#define MMIO_NON_POSTED_END 0xfedfffff
+#define SB_MMIO 0xFED80000
+#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x))
+
+static void sbxxx_enable_48mhzout(void)
+{
+ /* most likely programming to 48MHz out signal */
+ u32 reg32;
+ reg32 = SB_MMIO_MISC32(0x28);
+ reg32 &= 0xffc7ffff;
+ reg32 |= 0x00100000;
+ SB_MMIO_MISC32(0x28) = reg32;
+
+ reg32 = SB_MMIO_MISC32(0x40);
+ reg32 &= ~0x80u;
+ SB_MMIO_MISC32(0x40) = reg32;
+}
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+ u8 byte;
+ device_t dev;
+#if CONFIG_HAVE_ACPI_RESUME
+ void *resume_backup_memory;
+#endif
+ val = agesawrapper_amdinitmmio();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+
+ /* enable SIO decode */
+ dev = PCI_DEV(0, 0x14, 3);
+ byte = pci_read_config8(dev, 0x48);
+ byte |= 3; /* 2e, 2f */
+ pci_write_config8(dev, 0x48, byte);
+
+ post_code(0x30);
+
+ /* enable SB MMIO space */
+ outb(0x24, 0xcd6);
+ outb(0x1, 0xcd7);
+
+ /* enable SIO clock */
+ sbxxx_enable_48mhzout();
+ it8712f_kill_watchdog();
+ it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
+ console_init();
+
+ /* turn on secondary smbus at b20 */
+ outb(0x28, 0xcd6);
+ byte = inb(0xcd7);
+ byte |= 1;
+ outb(byte, 0xcd7);
+
+ /* set DDR3 voltage */
+ byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
+
+ if (!byte)
+ do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ post_code(0x37);
+ printk(BIOS_DEBUG, "agesawrapper_amdinitreset ");
+ val = agesawrapper_amdinitreset();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+ }
+
+ post_code(0x39);
+
+ val = agesawrapper_amdinitearly ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
+
+#if CONFIG_HAVE_ACPI_RESUME
+ if (!acpi_is_wakeup_early()) { /* Check for S3 resume */
+#endif
+ post_code(0x40);
+ val = agesawrapper_amdinitpost ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
+
+ post_code(0x41);
+ val = agesawrapper_amdinitenv ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
+ disable_cache_as_ram();
+#if CONFIG_HAVE_ACPI_RESUME
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ printk(BIOS_DEBUG, "agesawrapper_amdinitresume ");
+ val = agesawrapper_amdinitresume();
+ if (val)
+ printk(BIOS_DEBUG, "error level: %x \n", val);
+ else
+ printk(BIOS_DEBUG, "passed.\n");
+
+ printk(BIOS_DEBUG, "agesawrapper_amds3laterestore ");
+ val = agesawrapper_amds3laterestore ();
+ if (val)
+ printk(BIOS_DEBUG, "error level: %x \n", val);
+ else
+ printk(BIOS_DEBUG, "passed.\n");
+
+ post_code(0x61);
+ printk(BIOS_DEBUG, "Find resume memory location\n");
+ resume_backup_memory = (void *)backup_resume();
+
+ post_code(0x62);
+ printk(BIOS_DEBUG, "Move CAR stack.\n");
+ move_stack_high_mem();
+ printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE));
+
+ post_code(0x63);
+ disable_cache_as_ram();
+ printk(BIOS_DEBUG, "CAR disabled.\n");
+ set_resume_cache();
+
+ /*
+ * Copy the system memory that is in the ramstage area to the
+ * reserved area.
+ */
+ if (resume_backup_memory)
+ memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE);
+
+ printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n");
+ }
+#endif
+
+ /* Initialize i8259 pic */
+ post_code(0x41);
+ setup_i8259 ();
+
+ /* Initialize i8254 timers */
+ post_code(0x42);
+ setup_i8254 ();
+
+ post_code(0x50);
+ copy_and_run(0);
+
+ post_code(0x54); /* Should never see this post code. */
+}