summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorPatrick Georgi <patrick.georgi@coresystems.de>2010-02-07 21:43:48 +0000
committerPatrick Georgi <patrick.georgi@coresystems.de>2010-02-07 21:43:48 +0000
commitabf2ad716daff751d75907d47bcae4a7044fd7b4 (patch)
treef82427b43d76a4791253373affed1af8669e2e7b /src/mainboard
parent389240f288b2708617a35ebe8d7f89b3bff316c5 (diff)
newconfig is no more.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/a-trend/atc-6220/Config.lb132
-rw-r--r--src/mainboard/a-trend/atc-6220/Options.lb97
-rw-r--r--src/mainboard/a-trend/atc-6240/Config.lb142
-rw-r--r--src/mainboard/a-trend/atc-6240/Options.lb97
-rw-r--r--src/mainboard/abit/be6-ii_v2_0/Config.lb132
-rw-r--r--src/mainboard/abit/be6-ii_v2_0/Options.lb98
-rw-r--r--src/mainboard/advantech/pcm-5820/Config.lb129
-rw-r--r--src/mainboard/advantech/pcm-5820/Options.lb103
-rw-r--r--src/mainboard/amd/db800/Config.lb152
-rw-r--r--src/mainboard/amd/db800/Options.lb180
-rw-r--r--src/mainboard/amd/dbm690t/Config.lb258
-rw-r--r--src/mainboard/amd/dbm690t/Options.lb301
-rw-r--r--src/mainboard/amd/norwich/Config.lb125
-rw-r--r--src/mainboard/amd/norwich/Options.lb180
-rw-r--r--src/mainboard/amd/pistachio/Config.lb218
-rw-r--r--src/mainboard/amd/pistachio/Options.lb301
-rw-r--r--src/mainboard/amd/rumba/Config.lb115
-rw-r--r--src/mainboard/amd/rumba/Options.lb159
-rw-r--r--src/mainboard/amd/serengeti_cheetah/Config.lb358
-rw-r--r--src/mainboard/amd/serengeti_cheetah/Options.lb325
-rw-r--r--src/mainboard/amd/serengeti_cheetah_fam10/Config.lb362
-rw-r--r--src/mainboard/amd/serengeti_cheetah_fam10/Options.lb365
-rw-r--r--src/mainboard/arima/hdama/Config.lb297
-rw-r--r--src/mainboard/arima/hdama/Options.lb242
-rw-r--r--src/mainboard/artecgroup/dbe61/Config.lb124
-rw-r--r--src/mainboard/artecgroup/dbe61/Options.lb180
-rw-r--r--src/mainboard/artecgroup/dbe61/realmode/Config.lb2
-rw-r--r--src/mainboard/asi/mb_5blgp/Config.lb128
-rw-r--r--src/mainboard/asi/mb_5blgp/Options.lb103
-rw-r--r--src/mainboard/asi/mb_5blmp/Config.lb146
-rw-r--r--src/mainboard/asi/mb_5blmp/Options.lb163
-rw-r--r--src/mainboard/asus/a8n_e/Config.lb241
-rw-r--r--src/mainboard/asus/a8n_e/Options.lb168
-rw-r--r--src/mainboard/asus/a8v-e_se/Config.lb190
-rw-r--r--src/mainboard/asus/a8v-e_se/Options.lb165
-rw-r--r--src/mainboard/asus/m2v-mx_se/Config.lb167
-rw-r--r--src/mainboard/asus/m2v-mx_se/Options.lb174
-rw-r--r--src/mainboard/asus/mew-am/Config.lb135
-rw-r--r--src/mainboard/asus/mew-am/Options.lb97
-rw-r--r--src/mainboard/asus/mew-vm/Config.lb147
-rw-r--r--src/mainboard/asus/mew-vm/Options.lb154
-rw-r--r--src/mainboard/asus/p2b-d/Config.lb134
-rw-r--r--src/mainboard/asus/p2b-d/Options.lb103
-rw-r--r--src/mainboard/asus/p2b-ds/Config.lb135
-rw-r--r--src/mainboard/asus/p2b-ds/Options.lb104
-rw-r--r--src/mainboard/asus/p2b-f/Config.lb132
-rw-r--r--src/mainboard/asus/p2b-f/Options.lb97
-rw-r--r--src/mainboard/asus/p2b/Config.lb132
-rw-r--r--src/mainboard/asus/p2b/Options.lb98
-rw-r--r--src/mainboard/asus/p3b-f/Config.lb133
-rw-r--r--src/mainboard/asus/p3b-f/Options.lb97
-rw-r--r--src/mainboard/axus/tc320/Config.lb126
-rw-r--r--src/mainboard/axus/tc320/Options.lb103
-rw-r--r--src/mainboard/azza/pt-6ibd/Config.lb131
-rw-r--r--src/mainboard/azza/pt-6ibd/Options.lb97
-rw-r--r--src/mainboard/bcom/winnet100/Config.lb129
-rw-r--r--src/mainboard/bcom/winnet100/Options.lb103
-rw-r--r--src/mainboard/bcom/winnetp680/Config.lb138
-rw-r--r--src/mainboard/bcom/winnetp680/Options.lb97
-rw-r--r--src/mainboard/biostar/m6tba/Config.lb126
-rw-r--r--src/mainboard/biostar/m6tba/Options.lb97
-rw-r--r--src/mainboard/broadcom/blast/Config.lb235
-rw-r--r--src/mainboard/broadcom/blast/Options.lb260
-rw-r--r--src/mainboard/compaq/deskpro_en_sff_p600/Config.lb136
-rw-r--r--src/mainboard/compaq/deskpro_en_sff_p600/Options.lb97
-rw-r--r--src/mainboard/dell/s1850/Config.lb174
-rw-r--r--src/mainboard/dell/s1850/Options.lb228
-rw-r--r--src/mainboard/digitallogic/adl855pc/Config.lb159
-rw-r--r--src/mainboard/digitallogic/adl855pc/Options.lb107
-rw-r--r--src/mainboard/digitallogic/msm586seg/Config.lb111
-rw-r--r--src/mainboard/digitallogic/msm586seg/Options.lb121
-rw-r--r--src/mainboard/digitallogic/msm800sev/Config.lb170
-rw-r--r--src/mainboard/digitallogic/msm800sev/Options.lb180
-rw-r--r--src/mainboard/eaglelion/5bcm/Config.lb150
-rw-r--r--src/mainboard/eaglelion/5bcm/Options.lb164
-rw-r--r--src/mainboard/emulation/qemu-x86/Config.lb131
-rw-r--r--src/mainboard/emulation/qemu-x86/Options.lb140
-rw-r--r--src/mainboard/gigabyte/ga-6bxc/Config.lb130
-rw-r--r--src/mainboard/gigabyte/ga-6bxc/Options.lb97
-rw-r--r--src/mainboard/gigabyte/ga_2761gxdk/Config.lb270
-rw-r--r--src/mainboard/gigabyte/ga_2761gxdk/Options.lb354
-rw-r--r--src/mainboard/gigabyte/m57sli/Config.lb362
-rw-r--r--src/mainboard/gigabyte/m57sli/Options.lb364
-rw-r--r--src/mainboard/hp/dl145_g3/Config.lb210
-rw-r--r--src/mainboard/hp/dl145_g3/Options.lb328
-rw-r--r--src/mainboard/hp/e_vectra_p2706t/Config.lb128
-rw-r--r--src/mainboard/hp/e_vectra_p2706t/Options.lb101
-rw-r--r--src/mainboard/ibm/e325/Config.lb185
-rw-r--r--src/mainboard/ibm/e325/Options.lb221
-rw-r--r--src/mainboard/ibm/e326/Config.lb178
-rw-r--r--src/mainboard/ibm/e326/Options.lb227
-rw-r--r--src/mainboard/iei/juki-511p/Config.lb157
-rw-r--r--src/mainboard/iei/juki-511p/Options.lb145
-rw-r--r--src/mainboard/iei/nova4899r/Config.lb163
-rw-r--r--src/mainboard/iei/nova4899r/Options.lb172
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/Config.lb136
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/Options.lb106
-rw-r--r--src/mainboard/intel/d945gclf/Config.lb228
-rw-r--r--src/mainboard/intel/d945gclf/Options.lb329
-rw-r--r--src/mainboard/intel/eagleheights/Config.lb212
-rw-r--r--src/mainboard/intel/eagleheights/Options.lb323
-rw-r--r--src/mainboard/intel/jarrell/Config.lb182
-rw-r--r--src/mainboard/intel/jarrell/Options.lb242
-rw-r--r--src/mainboard/intel/mtarvon/Config.lb160
-rw-r--r--src/mainboard/intel/mtarvon/Options.lb225
-rw-r--r--src/mainboard/intel/truxton/Config.lb170
-rw-r--r--src/mainboard/intel/truxton/Options.lb236
-rw-r--r--src/mainboard/intel/xe7501devkit/Config.lb174
-rw-r--r--src/mainboard/intel/xe7501devkit/Options.lb238
-rw-r--r--src/mainboard/iwill/dk8_htx/Config.lb337
-rw-r--r--src/mainboard/iwill/dk8_htx/Options.lb326
-rw-r--r--src/mainboard/iwill/dk8s2/Config.lb196
-rw-r--r--src/mainboard/iwill/dk8s2/Options.lb228
-rw-r--r--src/mainboard/iwill/dk8x/Config.lb171
-rw-r--r--src/mainboard/iwill/dk8x/Options.lb227
-rw-r--r--src/mainboard/jetway/j7f24/Config.lb136
-rw-r--r--src/mainboard/jetway/j7f24/Options.lb96
-rw-r--r--src/mainboard/kontron/986lcd-m/Config.lb270
-rw-r--r--src/mainboard/kontron/986lcd-m/Options.lb328
-rw-r--r--src/mainboard/kontron/kt690/Config.lb262
-rw-r--r--src/mainboard/kontron/kt690/Options.lb301
-rw-r--r--src/mainboard/lippert/frontrunner/Config.lb112
-rw-r--r--src/mainboard/lippert/frontrunner/Options.lb159
-rw-r--r--src/mainboard/lippert/roadrunner-lx/Config.lb198
-rw-r--r--src/mainboard/lippert/roadrunner-lx/Options.lb206
-rw-r--r--src/mainboard/lippert/spacerunner-lx/Config.lb199
-rw-r--r--src/mainboard/lippert/spacerunner-lx/Options.lb206
-rw-r--r--src/mainboard/mitac/6513wu/Config.lb138
-rw-r--r--src/mainboard/mitac/6513wu/Options.lb108
-rw-r--r--src/mainboard/msi/ms6119/Config.lb133
-rw-r--r--src/mainboard/msi/ms6119/Options.lb97
-rw-r--r--src/mainboard/msi/ms6147/Config.lb141
-rw-r--r--src/mainboard/msi/ms6147/Options.lb97
-rw-r--r--src/mainboard/msi/ms6156/Config.lb134
-rw-r--r--src/mainboard/msi/ms6156/Options.lb97
-rw-r--r--src/mainboard/msi/ms6178/Config.lb133
-rw-r--r--src/mainboard/msi/ms6178/Options.lb99
-rw-r--r--src/mainboard/msi/ms7135/Config.lb241
-rw-r--r--src/mainboard/msi/ms7135/Options.lb321
-rw-r--r--src/mainboard/msi/ms7260/Config.lb288
-rw-r--r--src/mainboard/msi/ms7260/Options.lb188
-rw-r--r--src/mainboard/msi/ms9185/Config.lb231
-rw-r--r--src/mainboard/msi/ms9185/Options.lb327
-rw-r--r--src/mainboard/msi/ms9282/Config.lb322
-rw-r--r--src/mainboard/msi/ms9282/Options.lb311
-rw-r--r--src/mainboard/nec/powermate2000/Config.lb123
-rw-r--r--src/mainboard/nec/powermate2000/Options.lb96
-rw-r--r--src/mainboard/newisys/khepri/Config.lb192
-rw-r--r--src/mainboard/newisys/khepri/Options.lb243
-rw-r--r--src/mainboard/nvidia/l1_2pvv/Config.lb373
-rw-r--r--src/mainboard/nvidia/l1_2pvv/Options.lb353
-rw-r--r--src/mainboard/olpc/btest/Config.lb139
-rw-r--r--src/mainboard/olpc/btest/Options.lb160
-rw-r--r--src/mainboard/olpc/rev_a/Config.lb139
-rw-r--r--src/mainboard/olpc/rev_a/Options.lb160
-rw-r--r--src/mainboard/pcengines/alix1c/Config.lb190
-rw-r--r--src/mainboard/pcengines/alix1c/Options.lb198
-rw-r--r--src/mainboard/rca/rm4100/Config.lb144
-rw-r--r--src/mainboard/rca/rm4100/Options.lb96
-rw-r--r--src/mainboard/roda/rk886ex/Config.lb237
-rw-r--r--src/mainboard/roda/rk886ex/Options.lb339
-rw-r--r--src/mainboard/soyo/sy-6ba-plus-iii/Config.lb126
-rw-r--r--src/mainboard/soyo/sy-6ba-plus-iii/Options.lb96
-rw-r--r--src/mainboard/sunw/ultra40/Config.lb256
-rw-r--r--src/mainboard/sunw/ultra40/Options.lb280
-rw-r--r--src/mainboard/supermicro/h8dme/Config.lb301
-rw-r--r--src/mainboard/supermicro/h8dme/Options.lb355
-rw-r--r--src/mainboard/supermicro/h8dmr/Config.lb323
-rw-r--r--src/mainboard/supermicro/h8dmr/Options.lb353
-rw-r--r--src/mainboard/supermicro/h8dmr_fam10/Config.lb333
-rw-r--r--src/mainboard/supermicro/h8dmr_fam10/Options.lb363
-rw-r--r--src/mainboard/supermicro/h8qme_fam10/Config.lb347
-rw-r--r--src/mainboard/supermicro/h8qme_fam10/Options.lb373
-rw-r--r--src/mainboard/supermicro/x6dai_g/Config.lb167
-rw-r--r--src/mainboard/supermicro/x6dai_g/Options.lb228
-rw-r--r--src/mainboard/supermicro/x6dhe_g/Config.lb190
-rw-r--r--src/mainboard/supermicro/x6dhe_g/Options.lb228
-rw-r--r--src/mainboard/supermicro/x6dhe_g2/Config.lb190
-rw-r--r--src/mainboard/supermicro/x6dhe_g2/Options.lb228
-rw-r--r--src/mainboard/supermicro/x6dhr_ig/Config.lb187
-rw-r--r--src/mainboard/supermicro/x6dhr_ig/Options.lb228
-rw-r--r--src/mainboard/supermicro/x6dhr_ig2/Config.lb178
-rw-r--r--src/mainboard/supermicro/x6dhr_ig2/Options.lb228
-rw-r--r--src/mainboard/technexion/tim5690/Config.lb261
-rw-r--r--src/mainboard/technexion/tim5690/Options.lb303
-rw-r--r--src/mainboard/technexion/tim8690/Config.lb258
-rw-r--r--src/mainboard/technexion/tim8690/Options.lb300
-rw-r--r--src/mainboard/technologic/ts5300/Config.lb111
-rw-r--r--src/mainboard/technologic/ts5300/Options.lb135
-rw-r--r--src/mainboard/televideo/tc7020/Config.lb130
-rw-r--r--src/mainboard/televideo/tc7020/Options.lb102
-rw-r--r--src/mainboard/thomson/ip1000/Config.lb144
-rw-r--r--src/mainboard/thomson/ip1000/Options.lb96
-rw-r--r--src/mainboard/tyan/s1846/Config.lb128
-rw-r--r--src/mainboard/tyan/s1846/Options.lb97
-rw-r--r--src/mainboard/tyan/s2735/Config.lb179
-rw-r--r--src/mainboard/tyan/s2735/Options.lb256
-rw-r--r--src/mainboard/tyan/s2850/Config.lb197
-rw-r--r--src/mainboard/tyan/s2850/Options.lb244
-rw-r--r--src/mainboard/tyan/s2875/Config.lb189
-rw-r--r--src/mainboard/tyan/s2875/Options.lb245
-rw-r--r--src/mainboard/tyan/s2880/Config.lb200
-rw-r--r--src/mainboard/tyan/s2880/Options.lb244
-rw-r--r--src/mainboard/tyan/s2881/Config.lb233
-rw-r--r--src/mainboard/tyan/s2881/Options.lb261
-rw-r--r--src/mainboard/tyan/s2882/Config.lb227
-rw-r--r--src/mainboard/tyan/s2882/Options.lb244
-rw-r--r--src/mainboard/tyan/s2885/Config.lb233
-rw-r--r--src/mainboard/tyan/s2885/Options.lb269
-rw-r--r--src/mainboard/tyan/s2891/Config.lb123
-rw-r--r--src/mainboard/tyan/s2891/Options.lb302
-rw-r--r--src/mainboard/tyan/s2892/Config.lb124
-rw-r--r--src/mainboard/tyan/s2892/Options.lb290
-rw-r--r--src/mainboard/tyan/s2895/Config.lb145
-rw-r--r--src/mainboard/tyan/s2895/Options.lb311
-rw-r--r--src/mainboard/tyan/s2912/Config.lb315
-rw-r--r--src/mainboard/tyan/s2912/Options.lb355
-rw-r--r--src/mainboard/tyan/s2912_fam10/Config.lb320
-rw-r--r--src/mainboard/tyan/s2912_fam10/Options.lb362
-rw-r--r--src/mainboard/tyan/s4880/Config.lb195
-rw-r--r--src/mainboard/tyan/s4880/Options.lb253
-rw-r--r--src/mainboard/tyan/s4882/Config.lb302
-rw-r--r--src/mainboard/tyan/s4882/Options.lb252
-rw-r--r--src/mainboard/via/epia-cn/Config.lb135
-rw-r--r--src/mainboard/via/epia-cn/Options.lb98
-rw-r--r--src/mainboard/via/epia-m/Config.lb159
-rw-r--r--src/mainboard/via/epia-m/Options.lb135
-rw-r--r--src/mainboard/via/epia-m700/Config.lb165
-rw-r--r--src/mainboard/via/epia-m700/Options.lb138
-rw-r--r--src/mainboard/via/epia-n/Config.lb202
-rw-r--r--src/mainboard/via/epia-n/Options.lb113
-rw-r--r--src/mainboard/via/epia/Config.lb156
-rw-r--r--src/mainboard/via/epia/Options.lb143
-rw-r--r--src/mainboard/via/pc2500e/Config.lb161
-rw-r--r--src/mainboard/via/pc2500e/Options.lb109
-rw-r--r--src/mainboard/via/vt8454c/Config.lb163
-rw-r--r--src/mainboard/via/vt8454c/Options.lb233
237 files changed, 0 insertions, 46129 deletions
diff --git a/src/mainboard/a-trend/atc-6220/Config.lb b/src/mainboard/a-trend/atc-6220/Config.lb
deleted file mode 100644
index da9f349ac2..0000000000
--- a/src/mainboard/a-trend/atc-6220/Config.lb
+++ /dev/null
@@ -1,132 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # Consumer IR
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/a-trend/atc-6220/Options.lb b/src/mainboard/a-trend/atc-6220/Options.lb
deleted file mode 100644
index 68843932f1..0000000000
--- a/src/mainboard/a-trend/atc-6220/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/a-trend/atc-6240/Config.lb b/src/mainboard/a-trend/atc-6240/Config.lb
deleted file mode 100644
index 1f8a889d27..0000000000
--- a/src/mainboard/a-trend/atc-6240/Config.lb
+++ /dev/null
@@ -1,142 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83627hf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # Consumer IR
- io 0x60 = 0x00
- end
- device pnp 3f0.7 on # Game port / MIDI / GPIO 1
- io 0x60 = 0x201
- io 0x62 = 0x330
- irq 0x70 = 9
- end
- device pnp 3f0.8 off # GPIO 2 / WDT
- end
- device pnp 3f0.9 off # GPIO 3
- end
- device pnp 3f0.a off # ACPI
- end
- device pnp 3f0.b off # HWM (TODO)
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- device pci c.0 on end # Onboard audio (ES1371)
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/a-trend/atc-6240/Options.lb b/src/mainboard/a-trend/atc-6240/Options.lb
deleted file mode 100644
index 7930819f12..0000000000
--- a/src/mainboard/a-trend/atc-6240/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/abit/be6-ii_v2_0/Config.lb b/src/mainboard/abit/be6-ii_v2_0/Config.lb
deleted file mode 100644
index 58193b8fe8..0000000000
--- a/src/mainboard/abit/be6-ii_v2_0/Config.lb
+++ /dev/null
@@ -1,132 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # Consumer IR
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 7.1 on end # IDE, UDMA/33 (part of 82371EB)
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- device pci 13.0 on end # IDE, UDMA/66 (HPT366 controller)
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- register "ide0_drive0_udma33_enable" = "1"
- register "ide0_drive1_udma33_enable" = "1"
- register "ide1_drive0_udma33_enable" = "1"
- register "ide1_drive1_udma33_enable" = "1"
- end
- end
-end
diff --git a/src/mainboard/abit/be6-ii_v2_0/Options.lb b/src/mainboard/abit/be6-ii_v2_0/Options.lb
deleted file mode 100644
index c415fd21d0..0000000000
--- a/src/mainboard/abit/be6-ii_v2_0/Options.lb
+++ /dev/null
@@ -1,98 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024 # Override this in targets/*/Config.lb.
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 9 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
-default CONFIG_CONSOLE_VGA = 1 # Override this in targets/*/Config.lb.
-default CONFIG_PCI_ROM_RUN = 1 # Override this in targets/*/Config.lb.
-
-end
diff --git a/src/mainboard/advantech/pcm-5820/Config.lb b/src/mainboard/advantech/pcm-5820/Config.lb
deleted file mode 100644
index 44ec55dec7..0000000000
--- a/src/mainboard/advantech/pcm-5820/Config.lb
+++ /dev/null
@@ -1,129 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- chip southbridge/amd/cs5530 # Southbridge
- device pci 12.0 on # ISA bridge
- chip superio/winbond/w83977f # SUper I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.4 on # RTC / On-Now control
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 3f0.5 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # IR
- # TODO?
- end
- device pnp 3f0.7 on # GPIO 1
- # TODO?
- end
- device pnp 3f0.8 on # GPIO 2
- # TODO?
- end
- end
- end
- device pci 12.1 on end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio (onboard)
- device pci 12.4 on end # VGA
- device pci 13.0 on end # USB
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end
- chip cpu/amd/model_gx1 # CPU
- end
-end
diff --git a/src/mainboard/advantech/pcm-5820/Options.lb b/src/mainboard/advantech/pcm-5820/Options.lb
deleted file mode 100644
index 684e4dce30..0000000000
--- a/src/mainboard/advantech/pcm-5820/Options.lb
+++ /dev/null
@@ -1,103 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_VIDEO_MB
-uses CONFIG_SPLASH_GRAPHIC
-uses CONFIG_GX1_VIDEO
-uses CONFIG_GX1_VIDEOMODE
-uses CONFIG_PIRQ_ROUTE
-
-## Enable VGA with a splash screen (only 640x480 to run on most monitors).
-## We want to support up to 1024x768@16 so we need 2MiB video memory.
-## Note: Higher resolutions might need faster SDRAM speed.
-default CONFIG_GX1_VIDEO = 1
-default CONFIG_GX1_VIDEOMODE = 0
-default CONFIG_SPLASH_GRAPHIC = 1
-default CONFIG_VIDEO_MB = 2
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 2 # Override this in targets/*/Config.lb.
-default CONFIG_PIRQ_ROUTE = 1
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc "
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-
-end
diff --git a/src/mainboard/amd/db800/Config.lb b/src/mainboard/amd/db800/Config.lb
deleted file mode 100644
index de229062f7..0000000000
--- a/src/mainboard/amd/db800/Config.lb
+++ /dev/null
@@ -1,152 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end # Northbridge
- device pci 1.1 on end # Graphics
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
- register "lpc_serirq_enable" = "0x0000105a"
- register "lpc_serirq_polarity" = "0x0000EFA5"
- register "lpc_serirq_mode" = "1"
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "1" # 0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci d.0 on end # Ethernet
- device pci e.0 on end # Slot1
- device pci f.0 on # ISA Bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off end # Com2
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b off end # HW Monitor
- end
- end
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-end
-
diff --git a/src/mainboard/amd/db800/Options.lb b/src/mainboard/amd/db800/Options.lb
deleted file mode 100644
index 5ec7b1ecdb..0000000000
--- a/src/mainboard/amd/db800/Options.lb
+++ /dev/null
@@ -1,180 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_VIDEO_MB=8
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=4
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 32768
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb
deleted file mode 100644
index fde48a1cc2..0000000000
--- a/src/mainboard/amd/dbm690t/Config.lb
+++ /dev/null
@@ -1,258 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE
- object get_bus_conf.o
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
- if CONFIG_USE_INIT
-
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-#The variables belong to mainboard are defined here.
-
-#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
-#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
-#Define gfx_dual_slot, 0: single slot, 1: dual slot
-#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
-#Define gfx_tmds, 0: didn't support TMDS, 1: support
-#Define gfx_compliance, 0: didn't support compliance, 1: support
-#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
-#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_S1G1
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # southbridge
- chip southbridge/amd/rs690
- device pci 0.0 on end # HT 0x7910
- device pci 1.0 on # Internal Graphics P2P bridge 0x7912
- device pci 5.0 on end # Internal Graphics 0x791F
- end
- device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
- device pci 3.0 off end # PCIE P2P bridge 0x791b
- device pci 4.0 on end # PCIE P2P bridge 0x7914
- device pci 5.0 on end # PCIE P2P bridge 0x7915
- device pci 6.0 on end # PCIE P2P bridge 0x7916
- device pci 7.0 on end # PCIE P2P bridge 0x7917
- device pci 8.0 off end # NB/SB Link P2P bridge
- register "gpp_configuration" = "4"
- register "port_enable" = "0xfc"
- register "gfx_dev2_dev3" = "1"
- register "gfx_dual_slot" = "0"
- register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "0"
- register "gfx_compliance" = "0"
- register "gfx_reconfiguration" = "1"
- register "gfx_link_width" = "0"
- end
- chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
- device pci 12.0 on end # SATA 0x4380
- device pci 13.0 on end # USB 0x4387
- device pci 13.1 on end # USB 0x4388
- device pci 13.2 on end # USB 0x4389
- device pci 13.3 on end # USB 0x438a
- device pci 13.4 on end # USB 0x438b
- device pci 13.5 on end # USB 2 0x4386
- device pci 14.0 on # SM 0x4385
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x438c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x438d
- chip superio/ite/it8712f
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 off end # EC
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end #superio/ite/it8712f
- end #LPC
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # ACI 0x4382
- device pci 14.6 on end # MCI 0x438e
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "hda_viddid" = "0x10ec0882"
- end #southbridge/amd/sb600
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end #northbridge/amd/amdk8
- end #pci_domain
-end #northbridge/amd/amdk8/root_complex
-
diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb
deleted file mode 100644
index d5d54f985e..0000000000
--- a/src/mainboard/amd/dbm690t/Options.lb
+++ /dev/null
@@ -1,301 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_VIDEO_MB
-uses CONFIG_GFXUMA
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-# BTDC: Only one HT device on Herring.
-#HT Unit ID offset
-#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-
-#real SB Unit ID
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
-
-#make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="dbm690t"
-default CONFIG_MAINBOARD_VENDOR="amd"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_VIDEO_MB=1
-default CONFIG_GFXUMA=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/norwich/Config.lb b/src/mainboard/amd/norwich/Config.lb
deleted file mode 100644
index 5f0dc33d7b..0000000000
--- a/src/mainboard/amd/norwich/Config.lb
+++ /dev/null
@@ -1,125 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end # Northbridge
- device pci 1.1 on end # Graphics
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- register "lpc_serirq_enable" = "0x00001002"
- register "lpc_serirq_polarity" = "0x0000EFFD"
- register "lpc_serirq_mode" = "1"
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" #0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "1"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci b.0 on end # Slot 3
- device pci c.0 on end # Slot 4
- device pci d.0 on end # Slot 1
- device pci e.0 on end # Slot 2
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-end
-
diff --git a/src/mainboard/amd/norwich/Options.lb b/src/mainboard/amd/norwich/Options.lb
deleted file mode 100644
index 0ca20260f2..0000000000
--- a/src/mainboard/amd/norwich/Options.lb
+++ /dev/null
@@ -1,180 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_VIDEO_MB=8
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=6
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/amd/pistachio/Config.lb b/src/mainboard/amd/pistachio/Config.lb
deleted file mode 100644
index 1f59668328..0000000000
--- a/src/mainboard/amd/pistachio/Config.lb
+++ /dev/null
@@ -1,218 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE
- object get_bus_conf.o
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
- if CONFIG_USE_INIT
-
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-#The variables belong to mainboard are defined here.
-
-#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
-#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
-#Define gfx_dual_slot, 0: single slot, 1: dual slot
-#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
-#Define gfx_tmds, 0: didn't support TMDS, 1: support
-#Define gfx_compliance, 0: didn't support compliance, 1: support
-#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
-#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_AM2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # southbridge, K8 HT Configuration
- chip southbridge/amd/rs690
- device pci 0.0 on end # HT 0x7910
- # device pci 0.1 off end # CLK
- device pci 1.0 on # Internal Graphics P2P bridge 0x7912
- device pci 5.0 on end # Internal Graphics 0x791F
- end
- device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
- device pci 3.0 off end # PCIE P2P bridge 0x791b
- device pci 4.0 on end # PCIE P2P bridge 0x7914
- device pci 5.0 on end # PCIE P2P bridge 0x7915
- device pci 6.0 on end # PCIE P2P bridge 0x7916
- device pci 7.0 on end # PCIE P2P bridge 0x7917
- device pci 8.0 off end # NB/SB Link P2P bridge
- register "gpp_configuration" = "4"
- register "port_enable" = "0xfc"
- register "gfx_dev2_dev3" = "1"
- register "gfx_dual_slot" = "0"
- register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "0"
- register "gfx_compliance" = "0"
- register "gfx_reconfiguration" = "1"
- register "gfx_link_width" = "0"
- end
- chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
- device pci 12.0 on end # SATA 0x4380
- device pci 13.0 on end # USB 0x4387
- device pci 13.1 on end # USB 0x4388
- device pci 13.2 on end # USB 0x4389
- device pci 13.3 on end # USB 0x438a
- device pci 13.4 on end # USB 0x438b
- device pci 13.5 on end # USB 2 0x4386
- device pci 14.0 on # SM 0x4385
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 off end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 off end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 off end
- end
- end # SM
- device pci 14.1 on end # IDE 0x438c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on end # LPC 0x438d
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # ACI 0x4382
- device pci 14.6 on end # MCI 0x438e
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "hda_viddid" = "0x10ec0882"
- end #southbridge/amd/sb600
- end # device pci 18.0
-
- device pci 18.1 on end # K8 Address Map
- device pci 18.2 on end # K8 DRAM Controller and HT Trace Mode
- device pci 18.3 on end # K8 Miscellaneous Control
- end #northbridge/amd/amdk8
- end #pci_domain
-end #northbridge/amd/amdk8/root_complex
-
diff --git a/src/mainboard/amd/pistachio/Options.lb b/src/mainboard/amd/pistachio/Options.lb
deleted file mode 100644
index 922edf5210..0000000000
--- a/src/mainboard/amd/pistachio/Options.lb
+++ /dev/null
@@ -1,301 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_VIDEO_MB
-uses CONFIG_GFXUMA
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-# BTDC: Only one HT device on Herring.
-#HT Unit ID offset
-#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-
-#real SB Unit ID
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
-
-#make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="pistachio"
-default CONFIG_MAINBOARD_VENDOR="amd"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_VIDEO_MB=1
-default CONFIG_GFXUMA=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/rumba/Config.lb b/src/mainboard/amd/rumba/Config.lb
deleted file mode 100644
index 9083949f44..0000000000
--- a/src/mainboard/amd/rumba/Config.lb
+++ /dev/null
@@ -1,115 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx2
- device apic_cluster 0 on
- chip cpu/amd/model_gx2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- register "lpc_serirq_enable" = "0x80" # enabled with default timing
- device pci d.0 on end # Realtek 8139 LAN
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.4 on end # UHCI
- end
- end
-end
-
diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb
deleted file mode 100644
index e6a9b48cad..0000000000
--- a/src/mainboard/amd/rumba/Options.lb
+++ /dev/null
@@ -1,159 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/amd/serengeti_cheetah/Config.lb b/src/mainboard/amd/serengeti_cheetah/Config.lb
deleted file mode 100644
index 1e2f1b2046..0000000000
--- a/src/mainboard/amd/serengeti_cheetah/Config.lb
+++ /dev/null
@@ -1,358 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE
- object mptable.o
-end
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
-#if CONFIG_GENERATE_ACPI_TABLES
-# object acpi_tables.o
-# object fadt.o
-# if CONFIG_SB_HT_CHAIN_ON_BUS0
-# object dsdt_bus0.o
-# else
-# object dsdt.o
-# end
-# object ssdt.o
-# if CONFIG_ACPI_SSDTX_NUM
-# if CONFIG_SB_HT_CHAIN_ON_BUS0
-# object ssdt2_bus0.o
-# else
-# object ssdt2.o
-# end
-# end
-#end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "mv dsdt_lb.hex dsdt.c"
- end
- object ./dsdt.o
-
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-
- if CONFIG_ACPI_SSDTX_NUM
- makerule ssdt2.c
- depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
- action "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
- action "mv pci2.hex ssdt2.c"
- end
- object ./ssdt2.o
- makerule ssdt3.c
- depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
- action "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
- action "mv pci3.hex ssdt3.c"
- end
- object ./ssdt3.o
- makerule ssdt4.c
- depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
- action "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
- action "mv pci4.hex ssdt4.c"
- end
- object ./ssdt4.o
- end
-end
-
- if CONFIG_USE_INIT
- # compile cache_as_ram.c to auto.o
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for amd/serengeti_cheetah
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8132
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/i2c/i2cmux # pca9556 smbus mux
- device i2c 18 on #0 pca9516 1
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end
- device i2c 18 on #1 pca9516 2
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-2-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-2-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-3-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-3-1
- device i2c 57 on end
- end
- end
- end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on # northbridge
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- end # device pci 19.0
-
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
-
-
- end #pci_domain
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# end
-
-end
-
-
diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb
deleted file mode 100644
index a20289d794..0000000000
--- a/src/mainboard/amd/serengeti_cheetah/Options.lb
+++ /dev/null
@@ -1,325 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=8
-default CONFIG_MAX_PHYSICAL_CPUS=4
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x8
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0xa
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-
-##
-## for rev F training on AP purpose
-##
-default CONFIG_AP_CODE_IN_CAR=1
-default CONFIG_MEM_TRAIN_SEQ=1
-default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="serengeti_cheetah"
-default CONFIG_MAINBOARD_VENDOR="AMD"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
deleted file mode 100644
index da52d4d69a..0000000000
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
+++ /dev/null
@@ -1,362 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2007 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE
- object mptable.o
-end
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "mv dsdt_lb.hex dsdt.c"
- end
- object ./dsdt.o
-
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-
- if CONFIG_ACPI_SSDTX_NUM
- makerule ssdt2.c
- depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
- action "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
- action "mv pci2.hex ssdt2.c"
- end
- object ./ssdt2.o
- makerule ssdt3.c
- depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
- action "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
- action "mv pci3.hex ssdt3.c"
- end
- object ./ssdt3.o
- makerule ssdt4.c
- depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
- action "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
- action "mv pci4.hex ssdt4.c"
- end
- object ./ssdt4.o
- makerule ssdt5.c
- depends "$(CONFIG_MAINBOARD)/dx/pci5.asl"
- action "iasl -p $(CURDIR)/pci5 -tc $(CONFIG_MAINBOARD)/dx/pci5.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
- action "mv pci5.hex ssdt5.c"
- end
- object ./ssdt5.o
- end
-end
-
- if CONFIG_USE_INIT
- # compile cache_as_ram.c to auto.o
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-dir /southbridge/amd/amd8151
-
-# sample config for amd/serengeti_cheetah_fam10
-chip northbridge/amd/amdfam10/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F_1207 #L1 and DDR2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdfam10
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8132
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/i2c/i2cmux2 # pca9556 smbus mux
- chip drivers/i2c/i2cmux2 # pca9556 smbus mux
- device i2c 18 on #0 pca9516 1
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end
- device i2c 18 on #1 pca9516 2
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 53 on end
- end
- end
- end
- end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
-# device pci 00.5 on end
- end
- end #pci_domain
- #for node 32 to node 63
-# device pci_domain 0 on
-# chip northbridge/amd/amdfam10
-# device pci 00.0 on end# northbridge
-# device pci 00.0 on end
-# device pci 00.0 on end
-# device pci 00.0 on end
-# device pci 00.1 on end
-# device pci 00.2 on end
-# device pci 00.3 on end
-# device pci 00.4 on end
-# device pci 00.5 on end
-# end
-# end #pci_domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # hard reset
-# device pnp 0.9 off end # mcp55
-# device pnp 0.a on end # GH ext table
-# end
-
-end
-
-
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
deleted file mode 100644
index 5a17e3449c..0000000000
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
+++ /dev/null
@@ -1,365 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2007 Advanced Micro Devices, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_PCI_BUS_SEGN_BITS
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_AMDMCT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_AMD_UCODE_PATCH_FILE
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-##
-#FALLBACK_SIZE_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 1024K - 8K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 8k
-default CONFIG_FAILOVER_SIZE=0x02000
-
-#more 1M for pgtbl
-#if there is RAM on node0, we need to set it to 32M, otherwise can not access CAR on node0, and RAM on node1 at same time.
-default CONFIG_RAMTOP=16384*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=31
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_PHYSICAL_CPUS=8
-default CONFIG_MAX_CPUS=6 * CONFIG_MAX_PHYSICAL_CPUS
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x00
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0xa
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-#it only be 0, 1, 2, 3, 4 and default is 0
-#default CONFIG_PCI_BUS_SEGN_BITS=3
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc4000
-default CONFIG_DCACHE_RAM_SIZE=0x0c000
-#default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
-default CONFIG_USE_INIT=0
-
-#default CONFIG_AP_CODE_IN_CAR=1
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-
-default CONFIG_AMDMCT = 1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="Cheetah Fam10"
-default CONFIG_MAINBOARD_VENDOR="AMD"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-##
-## Set microcode patch file name
-##
-## Barcelona rev DR-Ax: "mc_patch_01000020.h"
-## Barcelona rev DR-B0, B1, BA: "mc_patch_01000096.h"
-## Barcelona rev DR-B2, B3: "mc_patch_01000095.h"
-## Shanghai rev DA-C2: "mc_patch_0100009f.h"
-##
-default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000095.h"
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 768k heap
-##
-default CONFIG_HEAP_SIZE=0xc0000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00200000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb
deleted file mode 100644
index 13e351f7d7..0000000000
--- a/src/mainboard/arima/hdama/Config.lb
+++ /dev/null
@@ -1,297 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# config for arima/hdama
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on # PCIX bridge
- ## On board NIC A
- #chip drivers/generic/generic
- # device pci 3.0 on
- # irq 0 = 0x13
- # end
- #end
- ## On board NIC B
- #chip drivers/generic/generic
- # device pci 4.0 on
- # irq 0 = 0x13
- # end
- #end
- ## PCI Slot 3
- #chip drivers/generic/generic
- # device pci 1.0 on
- # irq 0 = 0x11
- # irq 1 = 0x12
- # irq 2 = 0x13
- # irq 3 = 0x10
- # end
- #end
- ## PCI Slot 4
- #chip drivers/generic/generic
- # device pci 2.0 on
- # irq 0 = 0x12
- # irq 1 = 0x13
- # irq 2 = 0x10
- # irq 3 = 0x11
- # end
- #end
- end
- device pci 0.1 on end # IOAPIC
- device pci 1.0 on # PCIX bridge
- ## PCI Slot 1
- #chip drivers/generic/generic
- # device pci 1.0 on
- # irq 0 = 0x11
- # irq 1 = 0x12
- # irq 2 = 0x13
- # irq 3 = 0x10
- # end
- #end
- ## PCI Slot 2
- #chip drivers/generic/generic
- # device pci 2.0 on
- # irq 0 = 0x12
- # irq 1 = 0x13
- # irq 2 = 0x10
- # irq 3 = 0x11
- # end
- #end
- end
- device pci 1.1 on end # IOAPIC
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent of the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end # USB0
- device pci 0.1 on end # USB1
- device pci 0.2 off end # USB 2.0
- device pci 1.0 off end # LAN
- device pci 6.0 on end # ATI Rage XL
- ## PCI Slot 5 (correct?)
- #chip drivers/generic/generic
- # device pci 5.0 on
- # irq 0 = 0x11
- # irq 1 = 0x12
- # irq 2 = 0x13
- # irq 3 = 0x10
- # end
- #end
- ## PCI Slot 6 (correct?)
- #chip drivers/generic/generic
- # device pci 4.0 on
- # irq 0 = 0x10
- # irq 1 = 0x11
- # irq 2 = 0x12
- # irq 3 = 0x13
- # end
- #end
-
- end
- # LPC bridge
- device pci 1.0 on
- chip superio/nsc/pc87360
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.8 off end # ACB
- device pnp 2e.9 off end # FSCM
- device pnp 2e.a off end # WDT
- end
- end
- device pci 1.1 on end # IDE
- device pci 1.2 on end # SMBus 2.0
- device pci 1.3 on # System Management
- chip drivers/generic/generic
- #phillips pca9545 smbus mux
- device i2c 70 on
- # analog_devices adm1026
- chip drivers/generic/generic
- device i2c 2c on end
- end
- end
- device i2c 70 on end
- device i2c 70 on end
- device i2c 70 on end
- end
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end
- device pci 1.5 off end # AC97 Audio
- device pci 1.6 on end # AC97 Modem
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end # LDT1
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # chip northbridge/amd/amdk8
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb
deleted file mode 100644
index c047282de6..0000000000
--- a/src/mainboard/arima/hdama/Options.lb
+++ /dev/null
@@ -1,242 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_LOGICAL_CPUS enables dual core support
-##
-default CONFIG_LOGICAL_CPUS=1
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-#VGA
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="HDAMA"
-default CONFIG_MAINBOARD_VENDOR="ARIMA"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb
deleted file mode 100644
index e3cc41b135..0000000000
--- a/src/mainboard/artecgroup/dbe61/Config.lb
+++ /dev/null
@@ -1,124 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end # Northbridge
- device pci 1.1 on end # Graphics
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- register "lpc_serirq_enable" = "0x00001002"
- register "lpc_serirq_polarity" = "0x0000EFFD"
- register "lpc_serirq_mode" = "1"
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" #0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x2F8"
- register "com1_irq" = "3"
- register "com2_enable" = "1"
- register "com2_address" = "0x3F8"
- register "com2_irq" = "4"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci b.0 on end # Slot 3
- device pci c.0 on end # Slot 4
- device pci d.0 on end # Slot 1
- device pci e.0 on end # Slot 2
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-
-end
-
diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb
deleted file mode 100644
index 3aebf7446c..0000000000
--- a/src/mainboard/artecgroup/dbe61/Options.lb
+++ /dev/null
@@ -1,180 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_PCI_ROM_RUN=0
-default CONFIG_VIDEO_MB=8
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=3
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/artecgroup/dbe61/realmode/Config.lb b/src/mainboard/artecgroup/dbe61/realmode/Config.lb
deleted file mode 100644
index 899843db07..0000000000
--- a/src/mainboard/artecgroup/dbe61/realmode/Config.lb
+++ /dev/null
@@ -1,2 +0,0 @@
-config chip.h
-driver vgabios.o
diff --git a/src/mainboard/asi/mb_5blgp/Config.lb b/src/mainboard/asi/mb_5blgp/Config.lb
deleted file mode 100644
index 7bd25dc188..0000000000
--- a/src/mainboard/asi/mb_5blgp/Config.lb
+++ /dev/null
@@ -1,128 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- chip southbridge/amd/cs5530 # Southbridge
- device pci 0f.0 on end # Ethernet
- device pci 12.0 on # ISA bridge
- chip superio/nsc/pc87351 # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.e on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 on # System wake-up control (SWC)
- irq 0x60 = 0x500
- end
- device pnp 2e.5 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.6 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 on # GPIO
- irq 0x60 = 0x800
- end
- device pnp 2e.8 on # Fan speed control
- irq 0x60 = 0x900
- end
- end
- end
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA
- device pci 13.0 on end # USB
- register "ide0_enable" = "1"
- register "ide1_enable" = "0" # No connector on this board
- end
- end
- chip cpu/amd/model_gx1 # CPU
- end
-end
diff --git a/src/mainboard/asi/mb_5blgp/Options.lb b/src/mainboard/asi/mb_5blgp/Options.lb
deleted file mode 100644
index 7865fa3251..0000000000
--- a/src/mainboard/asi/mb_5blgp/Options.lb
+++ /dev/null
@@ -1,103 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_VIDEO_MB
-uses CONFIG_SPLASH_GRAPHIC
-uses CONFIG_GX1_VIDEO
-uses CONFIG_GX1_VIDEOMODE
-uses CONFIG_PIRQ_ROUTE
-
-## Enable VGA with a splash screen (only 640x480 to run on most monitors).
-## We want to support up to 1024x768@16 so we need 2MiB video memory.
-## Note: Higher resolutions might need faster SDRAM speed.
-default CONFIG_GX1_VIDEO = 1
-default CONFIG_GX1_VIDEOMODE = 0
-default CONFIG_SPLASH_GRAPHIC = 1
-default CONFIG_VIDEO_MB = 2
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 3 # Override this in targets/*/Config.lb.
-default CONFIG_PIRQ_ROUTE = 1
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc "
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-
-end
diff --git a/src/mainboard/asi/mb_5blmp/Config.lb b/src/mainboard/asi/mb_5blmp/Config.lb
deleted file mode 100644
index 93ac8e6fb6..0000000000
--- a/src/mainboard/asi/mb_5blmp/Config.lb
+++ /dev/null
@@ -1,146 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
-##
-## Romcc output
-##
-# makerule ./failover.E
-# depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-# action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-# end
-#
-# makerule ./failover.inc
-# depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-# action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-# end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-# if CONFIG_USE_FALLBACK_IMAGE
-# ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-# end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1 # Northbridge
- device pci_domain 0 on
- device pci 0.0 on end # Host bridge
- chip southbridge/amd/cs5530 # Southbridge
- device pci 0f.0 off end # Ethernet (Realtek RTL8139B)
- device pci 12.0 on # ISA bridge
- chip superio/nsc/pc87351 # Super I/O
- device pnp 2e.4 on # PS/2 keyboard (+ mouse?)
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- # irq 0x72 = 12
- end
- device pnp 2e.a on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.e on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.f off # Floppy
- io 0x60 = 0x3f2
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.10 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.12 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- end
- end
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA (onboard)
- device pci 13.0 on end # USB
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end
- chip cpu/amd/model_gx1 # CPU
- end
-end
-
diff --git a/src/mainboard/asi/mb_5blmp/Options.lb b/src/mainboard/asi/mb_5blmp/Options.lb
deleted file mode 100644
index 8924226889..0000000000
--- a/src/mainboard/asi/mb_5blmp/Options.lb
+++ /dev/null
@@ -1,163 +0,0 @@
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESS
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-# uses CONFIG_CONSOLE_VGA
-# uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256 * 1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=5
-default CONFIG_PIRQ_ROUTE=1
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to export a CMOS option table
-##
-# default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-# default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-# VGA Console
-# default CONFIG_CONSOLE_VGA=1
-# default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VIDEO_MB = 0
-
-end
diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb
deleted file mode 100644
index 374629c5b3..0000000000
--- a/src/mainboard/asus/a8n_e/Config.lb
+++ /dev/null
@@ -1,241 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
-## (Thanks to LSRA University of Mannheim for their support)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-# Needed by irq_tables and mptable and acpi_tables.
-object get_bus_conf.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-mainboardinit cpu/x86/32bit/entry32.inc
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-# Include an ID string (for safe flashing).
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-# ROMSTRAP table for CK804.
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-end
- mainboardinit cpu/amd/car/cache_as_ram.inc
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex # Root complex
- device apic_cluster 0 on # APIC cluster
- chip cpu/amd/socket_939 # Socket 939 CPU
- device apic 0 on end # APIC
- end
- end
-
- device pci_domain 0 on # PCI domain
- chip northbridge/amd/amdk8 # mc0
- device pci 18.0 on # Northbridge
- # Devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/ite/it8712f # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2 (N/A on this board)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.4 on # Environment controller
- io 0x60 = 0x290
- io 0x62 = 0x0000
- irq 0x70 = 0x00
- end
- device pnp 2e.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x71 = 2
- end
- device pnp 2e.6 on # PS/2 mouse
- irq 0x70 = 12
- irq 0x71 = 2
- end
- device pnp 2e.7 on # GPIO config
- io 0x60 = 0x0800
- # Set GPIO 1 & 2
- io 0x25 = 0x0000
- # Set GPIO 3 & 4
- io 0x27 = 0x2540
- # GPIO Polarity for Set 3
- io 0xb2 = 0x2100
- # GPIO Pin Internal Pull up for Set 3
- io 0xba = 0x0100
- # Simple I/O register config
- io 0xc0 = 0x0000
- io 0xc2 = 0x2540
- io 0xc8 = 0x0000
- io 0xca = 0x0500
- end
- device pnp 2e.8 on # Midi port
- io 0x60 = 0x300
- irq 0x70 = 10
- end
- device pnp 2e.9 on # Game port
- io 0x60 = 0x201
- end
- device pnp 2e.a off # IR (N/A on this board)
- io 0x60 = 0x310
- irq 0x70 = 11
- end
- end
- end
- device pci 1.1 on # SM 0
- # chip drivers/generic/generic #dimm 0-0-0
- # device i2c 50 on end
- # end
- # chip drivers/generic/generic #dimm 0-0-1
- # device i2c 51 on end
- # end
- # chip drivers/generic/generic #dimm 0-1-0
- # device i2c 52 on end
- # end
- # chip drivers/generic/generic #dimm 0-1-1
- # device i2c 53 on end
- # end
- # chip drivers/generic/generic #dimm 1-0-0
- # device i2c 54 on end
- # end
- # chip drivers/generic/generic #dimm 1-0-1
- # device i2c 55 on end
- # end
- # chip drivers/generic/generic #dimm 1-1-0
- # device i2c 56 on end
- # end
- # chip drivers/generic/generic #dimm 1-1-1
- # device i2c 57 on end
- # end
- end
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # Onboard audio (ACI)
- device pci 4.1 off end # Onboard modem (MCI), N/A
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on end # PCI
- device pci a.0 on end # NIC
- device pci b.0 on end # PCI E 3
- device pci c.0 on end # PCI E 2
- device pci d.0 on end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- # register "mac_eeprom_smbus" = "3"
- # register "mac_eeprom_addr" = "0x51"
- end
- end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb
deleted file mode 100644
index a03db4bb0b..0000000000
--- a/src/mainboard/asus/a8n_e/Options.lb
+++ /dev/null
@@ -1,168 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
-## (Thanks to LSRA University of Mannheim for their support)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_AP_CODE_IN_CAR
-uses CONFIG_MEM_TRAIN_SEQ
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_PCI_64BIT_PREF_MEM
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_ID_SECTION_OFFSET
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 - CONFIG_FAILOVER_SIZE
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE = 4 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_FAILOVER_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 13
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_OPTION_TABLE = 1
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-# SMP support (only worry about 2 micro processors).
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-# 1G memory hole.
-default CONFIG_HW_MEM_HOLE_SIZEK = 0x100000
-# HT Unit ID offset, default is 1, the typical one.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x10
-# Make the SB HT chain on bus 0, default is not (0).
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 2
-# Only offset for SB chain?, default is yes(1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-# default CONFIG_CONSOLE_BTEXT = 1 # BTEXT console
-default CONFIG_CONSOLE_VGA = 1 # For VGA console
-default CONFIG_PCI_ROM_RUN = 1 # For VGA console
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xc8000
-default CONFIG_DCACHE_RAM_SIZE = 32 * 1024
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 4 * 1024
-default CONFIG_USE_INIT = 0
-default CONFIG_AP_CODE_IN_CAR = 0
-default CONFIG_MEM_TRAIN_SEQ = 2
-default CONFIG_WAIT_BEFORE_CPUS_INIT = 0
-# default CONFIG_ENABLE_APIC_EXT_ID = 0
-# default CONFIG_APIC_ID_OFFSET = 0x10
-# default CONFIG_LIFT_BSP_APIC_ID = 0
-# default CONFIG_PCI_64BIT_PREF_MEM = 1
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_PART_NUMBER = "A8N-E"
-default CONFIG_MAINBOARD_VENDOR = "ASUS"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x815a
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-# Only use the option table in a normal image.
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE)
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_GDB_STUB = 0
-default CONFIG_USE_PRINTK_IN_CAR=1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-default CONFIG_ID_SECTION_OFFSET = 0x80
-
-end
diff --git a/src/mainboard/asus/a8v-e_se/Config.lb b/src/mainboard/asus/a8v-e_se/Config.lb
deleted file mode 100644
index 308a1fecef..0000000000
--- a/src/mainboard/asus/a8v-e_se/Config.lb
+++ /dev/null
@@ -1,190 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-driver mainboard.o
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- mainboardinit southbridge/via/k8t890/romstrap.inc
- ldscript /southbridge/via/k8t890/romstrap.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex # Root complex
- device apic_cluster 0 on # APIC cluster
- chip cpu/amd/socket_939 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- chip northbridge/amd/amdk8 # mc0
- device pci 18.0 on # Northbridge
- # Devices on link 0, link 0 == LDT 0
- chip southbridge/via/vt8237r # Southbridge
- register "ide0_enable" = "1" # Enable IDE channel 0
- register "ide1_enable" = "1" # Enable IDE channel 1
- register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0
- register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1
- register "fn_ctrl_lo" = "0" # Enable SB functions
- register "fn_ctrl_hi" = "0xad" # Enable SB functions
- device pci 0.0 on end # HT
- device pci f.1 on end # IDE
- device pci 11.0 on # LPC
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- chip superio/winbond/w83627ehg # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2 (N/A on this board)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 off # PS/2 keyboard (off)
- end
- device pnp 2e.106 off # Serial flash
- io 0x60 = 0x100
- end
- device pnp 2e.007 off # GPIO 1
- end
- device pnp 2e.107 on # Game port
- io 0x60 = 0x201
- end
- device pnp 2e.207 on # MIDI
- io 0x62 = 0x330
- irq 0x70 = 0xa
- end
- device pnp 2e.307 off # GPIO 6
- end
- device pnp 2e.8 off # WDTO_PLED
- end
- device pnp 2e.009 on # GPIO 2 on LDN 9 is in sio_setup
- end
- device pnp 2e.109 off # GPIO 3
- end
- device pnp 2e.209 off # GPIO 4
- end
- device pnp 2e.309 on # GPIO5
- end
- device pnp 2e.a off # ACPI
- end
- device pnp 2e.b on # Hardware monitor
- io 0x60 = 0x290
- irq 0x70 = 0
- end
- end
- end
- device pci 12.0 off end # VIA LAN (off, other chip used)
- end
- chip southbridge/via/k8t890 # "Southbridge" K8T890
- end
- end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb
deleted file mode 100644
index 92c51feb0c..0000000000
--- a/src/mainboard/asus/a8v-e_se/Options.lb
+++ /dev/null
@@ -1,165 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License v2 as published by
-## the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-# uses CONFIG_USE_OPTION_TABLE
-# uses CONFIG_RAMTOP
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-# bx_b005+
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_USE_PRINTK_IN_CAR
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_OPTION_TABLE = 0 # FIXME
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-default CONFIG_GENERATE_ACPI_TABLES = 1
-
-# 1G memory hole
-# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
-
-# Opteron K8 1G HT support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT = 1
-
-# HT Unit ID offset, default is 1, the typical one.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0x0
-
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x0
-
-# Make the SB HT chain on bus 0, default is not (0).
-# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
-
-# bx_b005+ make the SB HT chain on bus 0.
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 1
-
-# Only offset for SB chain?, default is yes(1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-
-default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
-default CONFIG_PCI_ROM_RUN = 1 # Needed for VGA.
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xcc000
-default CONFIG_DCACHE_RAM_SIZE = 0x4000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
-default CONFIG_USE_INIT = 0
-default CONFIG_ENABLE_APIC_EXT_ID = 0
-default CONFIG_APIC_ID_OFFSET = 0x10
-default CONFIG_LIFT_BSP_APIC_ID = 0
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_VENDOR = "ASUS"
-default CONFIG_MAINBOARD_PART_NUMBER = "A8V-E SE"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
-# default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234 # FIXME
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 256 * 1024
-# More 1M for pgtbl.
-# default CONFIG_RAMTOP = 2048*1024
-default CONFIG_RAMBASE = 0x00004000
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_GDB_STUB = 0
-default CONFIG_USE_PRINTK_IN_CAR = 1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-end
diff --git a/src/mainboard/asus/m2v-mx_se/Config.lb b/src/mainboard/asus/m2v-mx_se/Config.lb
deleted file mode 100644
index 908d1b7309..0000000000
--- a/src/mainboard/asus/m2v-mx_se/Config.lb
+++ /dev/null
@@ -1,167 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-driver mainboard.o
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- mainboardinit southbridge/via/k8t890/romstrap.inc
- ldscript /southbridge/via/k8t890/romstrap.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex # Root complex
- device apic_cluster 0 on # APIC cluster
- chip cpu/amd/socket_AM2 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- chip northbridge/amd/amdk8 # mc0
- device pci 18.0 on # Northbridge
- # Devices on link 0, link 0 == LDT 0
- chip southbridge/via/vt8237r # Southbridge
- register "ide0_enable" = "1" # Enable IDE channel 0
- register "ide1_enable" = "1" # Enable IDE channel 1
- register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0
- register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1
- register "fn_ctrl_lo" = "0xc0" # Enable SB functions
- register "fn_ctrl_hi" = "0x1d" # Enable SB functions
- device pci 0.0 on end # HT
- device pci f.1 on end # IDE
- device pci 11.0 on # LPC
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- chip superio/ite/it8712f # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Environment controller
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 0x00
- end
- device pnp 2e.5 off end # PS/2 keyboard
- device pnp 2e.6 off end # PS/2 mouse
- device pnp 2e.7 off end # GPIO config
- device pnp 2e.8 off end # Midi port
- device pnp 2e.9 off end # Game port
- device pnp 2e.a off end # IR
- end
- end
- device pci 12.0 on end # VIA LAN
- device pci 13.0 on end # br
- device pci 13.1 on end # br2 need to have it here to discover it
- end
- chip southbridge/via/k8t890 # "Southbridge" K8M890
- end
- end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb
deleted file mode 100644
index eaa7168682..0000000000
--- a/src/mainboard/asus/m2v-mx_se/Options.lb
+++ /dev/null
@@ -1,174 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007, 2009 Rudolf Marek <r.marek@assembler.cz>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License v2 as published by
-## the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_RAMTOP
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_VGA
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-# bx_b005+
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_USE_PRINTK_IN_CAR
-
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_OPTION_TABLE = 1 # FIXME
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-default CONFIG_GENERATE_ACPI_TABLES = 1
-default CONFIG_HAVE_MAINBOARD_RESOURCES = 1
-default CONFIG_HAVE_LOW_TABLES = 0
-default CONFIG_HAVE_ACPI_RESUME = 1
-
-# 1G memory hole
-# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
-
-# Opteron K8 1G HT support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT = 1
-
-# HT Unit ID offset, default is 1, the typical one.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0x0
-
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x0
-
-# Make the SB HT chain on bus 0, default is not (0).
-# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
-
-# bx_b005+ make the SB HT chain on bus 0.
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 1
-
-# Only offset for SB chain?, default is yes(1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-
-default CONFIG_VGA = 1
-default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
-default CONFIG_PCI_ROM_RUN = 0 # Needed for VGA.
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xcc000
-default CONFIG_DCACHE_RAM_SIZE = 0x4000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
-default CONFIG_USE_INIT = 0
-default CONFIG_ENABLE_APIC_EXT_ID = 0
-default CONFIG_APIC_ID_OFFSET = 0x10
-default CONFIG_LIFT_BSP_APIC_ID = 0
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_VENDOR = "ASUS"
-default CONFIG_MAINBOARD_PART_NUMBER = "M2V-MX SE"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
-# default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234 # FIXME
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 256 * 1024
-# More 1M for pgtbl.
-default CONFIG_RAMTOP = 32768*1024
-# to 1MB
-default CONFIG_RAMBASE = 0x1F00000
-default CONFIG_USE_OPTION_TABLE = 0
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_GDB_STUB = 0
-default CONFIG_USE_PRINTK_IN_CAR=1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-end
diff --git a/src/mainboard/asus/mew-am/Config.lb b/src/mainboard/asus/mew-am/Config.lb
deleted file mode 100644
index af6423c01b..0000000000
--- a/src/mainboard/asus/mew-am/Config.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- # Note: The -mcpu=p2 is important, or else... 'too few registers'.
- action "../romcc -mcpu=p2 -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- # Note: The -mcpu=p2 is important, or else... 'too few registers'.
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-# TODO: On-board graphics.
-chip northbridge/intel/i82810 # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Graphics Memory Controller Hub (GMCH)
- device pci 1.0 on end # Chipset Graphics Controller (CGC)
- chip southbridge/intel/i82801xx # Southbridge
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1e.0 on end # PCI bridge
- device pci 1f.0 on # ISA bridge
- chip superio/smsc/smscsuperio # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 4
- end
- device pnp 2e.4 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 2e.9 on # Game port
- io 0x60 = 0x201
- end
- device pnp 2e.a on # Power-management events (PME)
- io 0x60 = 0x600
- end
- device pnp 2e.b on # MIDI port (MPU-401)
- io 0x60 = 0x330
- irq 0x70 = 5
- end
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.2 on end # USB
- device pci 1f.3 on end # SMbus
- device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip)
- device pci 1f.6 off end # AC'97 modem (N/A)
- end
- end
-end
diff --git a/src/mainboard/asus/mew-am/Options.lb b/src/mainboard/asus/mew-am/Options.lb
deleted file mode 100644
index c62bf48e49..0000000000
--- a/src/mainboard/asus/mew-am/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 512 * 1024 # Override this in targets/*/Config.lb.
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 8 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
-default CONFIG_CONSOLE_VGA = 1 # Override this in targets/*/Config.lb.
-default CONFIG_PCI_ROM_RUN = 1 # Override this in targets/*/Config.lb.
-
-end
diff --git a/src/mainboard/asus/mew-vm/Config.lb b/src/mainboard/asus/mew-vm/Config.lb
deleted file mode 100644
index 3cd4db2e5f..0000000000
--- a/src/mainboard/asus/mew-vm/Config.lb
+++ /dev/null
@@ -1,147 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82810
- device pci_domain 0 on
- device pci 0.0 on end # Host bridge
- device pci 1.0 on # Onboard Video
- # device pci 1.0 on end
- end
- chip southbridge/intel/i82801xx # Southbridge
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1e.0 on # PCI Bridge
- # device pci 1.0 on end
- end
- device pci 1f.0 on # ISA/LPC? Bridge
- chip superio/smsc/lpc47b272
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.a off end # ACPI
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.2 on end # USB
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end # AC'97, no header on MEW-VM
- device pci 1f.6 off end # AC'97 Modem (MC'97)
- end
- end
- chip cpu/intel/socket_PGA370
- end
-end
-
diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb
deleted file mode 100644
index 50f0b54a7a..0000000000
--- a/src/mainboard/asus/mew-vm/Options.lb
+++ /dev/null
@@ -1,154 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 512*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE = 0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET = 0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 11
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE = 0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-default CONFIG_UDELAY_TSC=1
-
-end
diff --git a/src/mainboard/asus/p2b-d/Config.lb b/src/mainboard/asus/p2b-d/Config.lb
deleted file mode 100644
index 1170d4c091..0000000000
--- a/src/mainboard/asus/p2b-d/Config.lb
+++ /dev/null
@@ -1,134 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 1 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 4.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.9 on # GPIO 3
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 4.1 on end # IDE
- device pci 4.2 on end # USB
- device pci 4.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "1"
- register "ide0_drive1_udma33_enable" = "1"
- register "ide1_drive0_udma33_enable" = "1"
- register "ide1_drive1_udma33_enable" = "1"
- end
- end
-end
diff --git a/src/mainboard/asus/p2b-d/Options.lb b/src/mainboard/asus/p2b-d/Options.lb
deleted file mode 100644
index 2ccd3a9d26..0000000000
--- a/src/mainboard/asus/p2b-d/Options.lb
+++ /dev/null
@@ -1,103 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 6 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_IOAPIC = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-end
diff --git a/src/mainboard/asus/p2b-ds/Config.lb b/src/mainboard/asus/p2b-ds/Config.lb
deleted file mode 100644
index 4307c39442..0000000000
--- a/src/mainboard/asus/p2b-ds/Config.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 1 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 4.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.9 on # GPIO 3
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 4.1 on end # IDE
- device pci 4.2 on end # USB
- device pci 4.3 on end # ACPI
- device pci 6.0 on end # Onboard SCSI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "1"
- register "ide0_drive1_udma33_enable" = "1"
- register "ide1_drive0_udma33_enable" = "1"
- register "ide1_drive1_udma33_enable" = "1"
- end
- end
-end
diff --git a/src/mainboard/asus/p2b-ds/Options.lb b/src/mainboard/asus/p2b-ds/Options.lb
deleted file mode 100644
index 45214cf0a3..0000000000
--- a/src/mainboard/asus/p2b-ds/Options.lb
+++ /dev/null
@@ -1,104 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_IOAPIC = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/asus/p2b-f/Config.lb b/src/mainboard/asus/p2b-f/Config.lb
deleted file mode 100644
index 4be4b44b6b..0000000000
--- a/src/mainboard/asus/p2b-f/Config.lb
+++ /dev/null
@@ -1,132 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 4.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # Consumer IR
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 4.1 on end # IDE
- device pci 4.2 on end # USB
- device pci 4.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/asus/p2b-f/Options.lb b/src/mainboard/asus/p2b-f/Options.lb
deleted file mode 100644
index 68843932f1..0000000000
--- a/src/mainboard/asus/p2b-f/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/asus/p2b/Config.lb b/src/mainboard/asus/p2b/Config.lb
deleted file mode 100644
index 559694de3c..0000000000
--- a/src/mainboard/asus/p2b/Config.lb
+++ /dev/null
@@ -1,132 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 4.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.9 on # GPIO 3
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 4.1 on end # IDE
- device pci 4.2 on end # USB
- device pci 4.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb
deleted file mode 100644
index 0d1bb91ca8..0000000000
--- a/src/mainboard/asus/p2b/Options.lb
+++ /dev/null
@@ -1,98 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 6 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/asus/p3b-f/Config.lb b/src/mainboard/asus/p3b-f/Config.lb
deleted file mode 100644
index 628c41372b..0000000000
--- a/src/mainboard/asus/p3b-f/Config.lb
+++ /dev/null
@@ -1,133 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-# TODO
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 4.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # Consumer IR
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 4.1 on end # IDE
- device pci 4.2 on end # USB
- device pci 4.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/asus/p3b-f/Options.lb b/src/mainboard/asus/p3b-f/Options.lb
deleted file mode 100644
index 1320c2612d..0000000000
--- a/src/mainboard/asus/p3b-f/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 8 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/axus/tc320/Config.lb b/src/mainboard/axus/tc320/Config.lb
deleted file mode 100644
index e802587bb3..0000000000
--- a/src/mainboard/axus/tc320/Config.lb
+++ /dev/null
@@ -1,126 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- chip southbridge/amd/cs5530 # Southbridge
- device pci 12.0 on # ISA bridge
- chip superio/nsc/pc97317 # Super I/O
- device pnp 2e.0 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.1 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.2 on # RTC, advanced power control (APC)
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 2e.3 off # Floppy (N/A on this board)
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.4 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.5 off # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0xe0
- end
- device pnp 2e.8 on # Power management
- io 0x60 = 0xe800
- end
- end
- end
- device pci 12.1 off end # SMI
- device pci 12.2 off end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA (onboard)
- device pci 13.0 on end # USB
- # register "ide0_enable" = "1"
- # register "ide1_enable" = "1"
- end
- end
- chip cpu/amd/model_gx1 # CPU
- end
-end
diff --git a/src/mainboard/axus/tc320/Options.lb b/src/mainboard/axus/tc320/Options.lb
deleted file mode 100644
index b0fd16ebca..0000000000
--- a/src/mainboard/axus/tc320/Options.lb
+++ /dev/null
@@ -1,103 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_VIDEO_MB
-uses CONFIG_SPLASH_GRAPHIC
-uses CONFIG_GX1_VIDEO
-uses CONFIG_GX1_VIDEOMODE
-uses CONFIG_PIRQ_ROUTE
-
-## Enable VGA with a splash screen (only 640x480 to run on most monitors).
-## We want to support up to 1024x768@16 so we need 2MiB video memory.
-## Note: Higher resolutions might need faster SDRAM speed.
-default CONFIG_GX1_VIDEO = 1
-default CONFIG_GX1_VIDEOMODE = 0
-default CONFIG_SPLASH_GRAPHIC = 1
-default CONFIG_VIDEO_MB = 2
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_MAINBOARD_VENDOR = "AXUS"
-default CONFIG_MAINBOARD_PART_NUMBER = "TC320"
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 2 # Soldered NIC, internal USB, no real slots
-default CONFIG_PIRQ_ROUTE = 1
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc "
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
-
-end
diff --git a/src/mainboard/azza/pt-6ibd/Config.lb b/src/mainboard/azza/pt-6ibd/Config.lb
deleted file mode 100644
index b4f2224fc2..0000000000
--- a/src/mainboard/azza/pt-6ibd/Config.lb
+++ /dev/null
@@ -1,131 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.6 on # Consumer IR
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/azza/pt-6ibd/Options.lb b/src/mainboard/azza/pt-6ibd/Options.lb
deleted file mode 100644
index 68843932f1..0000000000
--- a/src/mainboard/azza/pt-6ibd/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/bcom/winnet100/Config.lb b/src/mainboard/bcom/winnet100/Config.lb
deleted file mode 100644
index ccd4fb128b..0000000000
--- a/src/mainboard/bcom/winnet100/Config.lb
+++ /dev/null
@@ -1,129 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- chip southbridge/amd/cs5530 # Southbridge
- device pci 0f.0 on end # Ethernet (onboard)
- device pci 12.0 on # ISA bridge
- chip superio/nsc/pc97317 # Super I/O
- device pnp 2e.0 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.1 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.2 on # RTC, Advanced power control (APC)
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 2e.3 off # Floppy (N/A on this board)
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.4 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.5 on # COM2 (used for smartcard reader)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0xe0
- end
- device pnp 2e.8 on # Power management
- io 0x60 = 0xe8
- end
- end
- end
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA (onboard)
- device pci 13.0 on end # USB
- register "ide0_enable" = "1"
- register "ide1_enable" = "0" # Not available/needed on this board
- end
- end
- chip cpu/amd/model_gx1 # CPU
- end
-end
diff --git a/src/mainboard/bcom/winnet100/Options.lb b/src/mainboard/bcom/winnet100/Options.lb
deleted file mode 100644
index d241356d54..0000000000
--- a/src/mainboard/bcom/winnet100/Options.lb
+++ /dev/null
@@ -1,103 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_VIDEO_MB
-uses CONFIG_SPLASH_GRAPHIC
-uses CONFIG_GX1_VIDEO
-uses CONFIG_GX1_VIDEOMODE
-uses CONFIG_PIRQ_ROUTE
-
-## Enable VGA with a splash screen (only 640x480 to run on most monitors).
-## We want to support up to 1024x768@16 so we need 2MiB video memory.
-## Note: Higher resolutions might need faster SDRAM speed.
-default CONFIG_GX1_VIDEO = 1
-default CONFIG_GX1_VIDEOMODE = 0
-default CONFIG_SPLASH_GRAPHIC = 1
-default CONFIG_VIDEO_MB = 2
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_MAINBOARD_VENDOR = "BCOM"
-default CONFIG_MAINBOARD_PART_NUMBER = "WinNET100"
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 2 # Soldered NIC, internal USB, no real slots
-default CONFIG_PIRQ_ROUTE = 1
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc "
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
-
-end
diff --git a/src/mainboard/bcom/winnetp680/Config.lb b/src/mainboard/bcom/winnetp680/Config.lb
deleted file mode 100644
index ed036503d6..0000000000
--- a/src/mainboard/bcom/winnetp680/Config.lb
+++ /dev/null
@@ -1,138 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/via/cn700 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # AGP Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # Memory Controller
- device pci 0.4 on end # Power Management
- device pci 0.7 on end # V-Link Controller
- device pci 1.0 on end # PCI Bridge
- chip southbridge/via/vt8237r # Southbridge
- # Enable both IDE channels.
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- # Both cables are 40pin.
- register "ide0_80pin_cable" = "0"
- register "ide1_80pin_cable" = "0"
- register "fn_ctrl_lo" = "0x80"
- register "fn_ctrl_hi" = "0x1d"
- device pci f.0 on end # IDE
- device pci 10.0 on end # UHCI
- device pci 10.1 on end # UHCI
- device pci 10.2 on end # UHCI
- device pci 10.3 on end # UHCI
- device pci 10.4 on end # EHCI
- device pci 11.0 on # Southbridge LPC
- chip superio/winbond/w83697hf # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 off end # Consumer IR
- device pnp 2e.7 off end # Game port, GPIO 1
- device pnp 2e.8 off end # MIDI port, GPIO 5
- device pnp 2e.9 off end # GPIO 2-4
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HWM
- io 0x60 = 0x290
- end
- end
- end
- device pci 11.5 on end # AC'97 audio
- device pci 12.0 on end # Ethernet
- end
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/via/model_c7 # VIA C7
- device apic 0 on end # APIC
- end
- end
-end
diff --git a/src/mainboard/bcom/winnetp680/Options.lb b/src/mainboard/bcom/winnetp680/Options.lb
deleted file mode 100644
index 99bd7f49ae..0000000000
--- a/src/mainboard/bcom/winnetp680/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VIDEO_MB
-uses CONFIG_SMP
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_SMP = 1
-default CONFIG_IOAPIC = 1
-default CONFIG_VIDEO_MB = 32
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 10
-default CONFIG_GENERATE_ACPI_TABLES = 0
-default CONFIG_HAVE_OPTION_TABLE = 1
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_USE_FALLBACK_IMAGE = 1
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
-default HOSTCC = "gcc"
-
-end
diff --git a/src/mainboard/biostar/m6tba/Config.lb b/src/mainboard/biostar/m6tba/Config.lb
deleted file mode 100644
index 20edbc9b4c..0000000000
--- a/src/mainboard/biostar/m6tba/Config.lb
+++ /dev/null
@@ -1,126 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/smsc/smscsuperio # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.4 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.5 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.7 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.8 on # Aux I/O
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/biostar/m6tba/Options.lb b/src/mainboard/biostar/m6tba/Options.lb
deleted file mode 100644
index 68843932f1..0000000000
--- a/src/mainboard/biostar/m6tba/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/broadcom/blast/Config.lb b/src/mainboard/broadcom/blast/Config.lb
deleted file mode 100644
index 238596d256..0000000000
--- a/src/mainboard/broadcom/blast/Config.lb
+++ /dev/null
@@ -1,235 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE
- object get_bus_conf.o
- object irq_tables.o
-end
-
- if CONFIG_USE_INIT
-
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for broadcom/blast
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0
- chip southbridge/broadcom/bcm5780 # HT2000
- device pci 0.0 on end # PXB 1 0x0130
- device pci 1.0 on # PXB 2 0x0130
- device pci 4.0 on end # GB E 0x1668 vid = 0x14e4
- device pci 4.1 on end # GB E 0x1669 vid = 0x14e4
- end
- device pci 2.0 on end # PCI E 1 #0x0132
- device pci 3.0 on end # PCI E 2
- device pci 4.0 on end # PCI E 3
- device pci 5.0 on end # PCI E 4
- end
- chip southbridge/broadcom/bcm5785 # HT1000
- device pci 0.0 on # HT PXB 0x0036
- device pci d.0 on end # PPBX 0x0104
- device pci e.0 on end # SATA 0x024a
- end
- device pci 1.0 on # Legacy pci main 0x0205
- chip drivers/i2c/i2cmux2 # pca9554 smbus mux
- device i2c 71 on end #0 pca9554 0
- device i2c 71 on end #0 pca9554 1
- device i2c 71 on end #0 pca9554 2
- device i2c 71 on end #0 pca9554 3
- device i2c 71 on end #0 pca9554 4
- device i2c 71 on end #0 pca9554 5
- device i2c 71 on #0 pca9554 6
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end
- device i2c 71 on #1 pca9554 7
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 53 on end
- end
- end
- end
-
- end
- device pci 1.1 on end # IDE 0x0214
- device pci 1.2 on # LPC 0x0234
- chip superio/nsc/pc87417
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.f off end # XBUS
- device pnp 2e.10 on #RTC
- io 0x60 = 0x70
- io 0x62 = 0x72
- end
- end
- end
- device pci 1.3 on end # WDTimer 0x0238
- device pci 1.4 on end # XIOAPIC0 0x0235
- device pci 1.5 on end # XIOAPIC1
- device pci 1.6 on end # XIOAPIC2
- device pci 2.0 on end # USB 0x0223
- device pci 2.1 on end # USB
- device pci 2.2 on end # USB
- device pci 4.0 on end # it is in bcm5785_0 bus
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
-
- end #pci_domain
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# end
-
-end
-
diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb
deleted file mode 100644
index 208a6c7433..0000000000
--- a/src/mainboard/broadcom/blast/Options.lb
+++ /dev/null
@@ -1,260 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-#default CONFIG_CONSOLE_VGA=1
-#default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset
-default CONFIG_HT_CHAIN_UNITID_BASE=0x6
-
-#real SB Unit ID
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
-
-#make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="blast"
-default CONFIG_MAINBOARD_VENDOR="Broadcom"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb
deleted file mode 100644
index 49f1585d6b..0000000000
--- a/src/mainboard/compaq/deskpro_en_sff_p600/Config.lb
+++ /dev/null
@@ -1,136 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- device pci a.0 on end # NIC (onboard)
- chip southbridge/intel/i82371eb # Southbridge
- device pci 14.0 on # ISA bridge
- # chip superio/nsc/pc97307 # Super I/O
- chip superio/nsc/pc97317 # Super I/O (FIXME: Should be PC97307!)
- device pnp 15c.0 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 15c.1 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 15c.2 on # RTC, APC
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 15c.3 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 15c.4 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 15c.5 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 15c.6 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 15c.7 on # GPIO 1
- end
- device pnp 15c.8 on # Power management
- end
- end
- end
- device pci 14.1 on end # IDE
- device pci 14.2 on end # USB
- device pci 14.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb
deleted file mode 100644
index dd8ab0256b..0000000000
--- a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 5 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/dell/s1850/Config.lb b/src/mainboard/dell/s1850/Config.lb
deleted file mode 100644
index cc0edc6a8b..0000000000
--- a/src/mainboard/dell/s1850/Config.lb
+++ /dev/null
@@ -1,174 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -fno-simplify-phi -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -fno-simplify-phi -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -fno-simplify-phi -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -fno-simplify-phi -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520 # mch
- device pci_domain 0 on
- chip southbridge/intel/i82801er # i82801er
- # USB ports
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 on end
- device pci 1d.7 on end
-
- # -> Bridge
- device pci 1e.0 on end
-
- # -> ISA
- device pci 1f.0 on
- chip superio/nsc/pc8374
- device pnp 2e.0 off end
- device pnp 2e.1 off end
- device pnp 2e.2 off end
- device pnp 2e.3 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 off end
- device pnp 2e.7 off end
- device pnp 2e.8 off end
- end
- end
- # -> IDE
- device pci 1f.1 on end
- # -> SATA
- device pci 1f.2 on end
- device pci 1f.3 on end
-
- register "pirq_a_d" = "0x8e8b8f80"
- register "pirq_e_h" = "0x80808080"
- end
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 01.0 on end
- device pci 02.0 on
- chip southbridge/intel/pxhd # pxhd1
- # Bus bridges and ioapics usually bus 1
- device pci 0.0 on
- # On board gig e1000
- chip drivers/generic/generic
- device pci 03.0 on end
- device pci 03.1 on end
- end
- end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 0.3 on end
- end
- end
- device pci 04.0 on end
- device pci 06.0 on end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # cpu 0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # cpu 1
- device apic 6 on end
- end
- end
- register "intrline" = "0x00070100"
-end
-
diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb
deleted file mode 100644
index fb65f8d8e2..0000000000
--- a/src/mainboard/dell/s1850/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DHR"
-default CONFIG_MAINBOARD_VENDOR= "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-#default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/digitallogic/adl855pc/Config.lb b/src/mainboard/digitallogic/adl855pc/Config.lb
deleted file mode 100644
index c20323109f..0000000000
--- a/src/mainboard/digitallogic/adl855pc/Config.lb
+++ /dev/null
@@ -1,159 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-## This does not look right but it is a literal conversion of the
-## old version of this file.
-chip northbridge/intel/i855pm
- device pci_domain 0 on
- device pci 0.0 on end
- device pci 1.0 on end
- chip southbridge/intel/i82801dbm
-# pci 11.0 on end
-# pci 11.1 on end
-# pci 11.2 on end
-# pci 11.3 on end
-# pci 11.4 on end
-# pci 11.5 on end
-# pci 11.6 on end
-# pci 12.0 on end
- register "enable_usb" = "0"
- register "enable_native_ide" = "0"
- register "enable_usb" = "0"
- register "enable_native_ide" = "0"
- chip superio/winbond/w83627hf # link 1
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- register "com1" = "{1}"
- # register "com1" = "{1, 0, 0x3f8, 4}"
- # register "lpt" = "{1}"
- end
- end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA479M
- device apic 0 on end
- end
- end
-end
diff --git a/src/mainboard/digitallogic/adl855pc/Options.lb b/src/mainboard/digitallogic/adl855pc/Options.lb
deleted file mode 100644
index 5c7ee6e6db..0000000000
--- a/src/mainboard/digitallogic/adl855pc/Options.lb
+++ /dev/null
@@ -1,107 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_UDELAY_IO
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 1024*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## use io based udelay function
-##
-default CONFIG_UDELAY_IO=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=5
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-end
diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb
deleted file mode 100644
index dbd3e64447..0000000000
--- a/src/mainboard/digitallogic/msm586seg/Config.lb
+++ /dev/null
@@ -1,111 +0,0 @@
-default CONFIG_ROM_SIZE = 512 * 1024
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 32 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-
-# VGA console
-if CONFIG_CONSOLE_VGA
- default CONFIG_PCI_ROM_RUN=1
-end
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-dir /devices
-config chip.h
-
-chip cpu/amd/sc520
- device pci_domain 0 on
- device pci 0.0 on end
- device pci 12.0 on end # enet
- device pci 14.0 on end # 69000
-# register "com1" = "{1}"
-# register "com1" = "{1, 0, 0x3f8, 4}"
- end
-
-end
diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb
deleted file mode 100644
index 1bd5cae41a..0000000000
--- a/src/mainboard/digitallogic/msm586seg/Options.lb
+++ /dev/null
@@ -1,121 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_COMPRESS
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_USE_INIT
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-
-uses CONFIG_CONSOLE_SERIAL8250
-
-
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-
-# VGA support
-uses CONFIG_CONSOLE_VGA
-#uses CONFIG_LEGACY_VGABIOS
-#uses VGABIOS_START
-uses CONFIG_PCI_ROM_RUN
-
-
-default CONFIG_CONSOLE_SERIAL8250=1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-end
diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb
deleted file mode 100644
index 5965cc1d0a..0000000000
--- a/src/mainboard/digitallogic/msm800sev/Config.lb
+++ /dev/null
@@ -1,170 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- # How to get these? Boot linux and do this:
- # rdmsr 0x51400025
- register "lpc_serirq_enable" = "0x0000105a"
- # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
- register "lpc_serirq_polarity" = "0x0000EFA5"
- # mode is high 10 bits (determined from code)
- register "lpc_serirq_mode" = "1"
- # Don't yet know how to find this.
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" #0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci f.0 on # ISA Bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci f.1 on end # Flash controller
- device pci f.2 on end # IDE controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
-
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-
-end
-
diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb
deleted file mode 100644
index 88e2a1f0e2..0000000000
--- a/src/mainboard/digitallogic/msm800sev/Options.lb
+++ /dev/null
@@ -1,180 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_VIDEO_MB=8
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 32768
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/eaglelion/5bcm/Config.lb b/src/mainboard/eaglelion/5bcm/Config.lb
deleted file mode 100644
index 64e833f938..0000000000
--- a/src/mainboard/eaglelion/5bcm/Config.lb
+++ /dev/null
@@ -1,150 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/amd/cs5530
- device pci 12.0 on
- chip superio/nsc/pc97317
- device pnp 2e.0 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.1 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.2 on # RTC
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 2e.3 off # FDC
- end
- device pnp 2e.4 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.5 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0xe0
- end
- device pnp 2e.8 on # Power Management
- io 0x60 = 0xe800
- end
- register "com1" = "{115200}"
- register "com2" = "{38400}"
- end
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 off end # Audio
- device pci 12.4 off end # VGA
- end
- end
- end
-
- chip cpu/amd/model_gx1
- end
-
-end
-
diff --git a/src/mainboard/eaglelion/5bcm/Options.lb b/src/mainboard/eaglelion/5bcm/Options.lb
deleted file mode 100644
index fb2bfae81e..0000000000
--- a/src/mainboard/eaglelion/5bcm/Options.lb
+++ /dev/null
@@ -1,164 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_VIDEO_MB
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-default CONFIG_VIDEO_MB = 0
-
-end
diff --git a/src/mainboard/emulation/qemu-x86/Config.lb b/src/mainboard/emulation/qemu-x86/Config.lb
deleted file mode 100644
index 7357648411..0000000000
--- a/src/mainboard/emulation/qemu-x86/Config.lb
+++ /dev/null
@@ -1,131 +0,0 @@
-## we don't use CONFIG_USE_DCACHE_RAM by default
-default CONFIG_USE_DCACHE_RAM=0
-##
-## Compute the location and size of where this firmware image
-## (coreboot plus bootloader) will live in the boot rom chip.
-##
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_ROM_SECTION_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_ROM_SECTION_OFFSET = CONFIG_ROM_SIZE - CONFIG_ROM_SECTION_SIZE
-
-##
-## Compute where this copy of coreboot will start in the boot rom
-##
-default CONFIG_ROMBASE = (0xffffffff - CONFIG_ROM_SIZE + CONFIG_ROM_SECTION_OFFSET + 1)
-
-##
-## Compute a range of ROM that can cached to speed up coreboot,
-## execution speed.
-##
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-## CONFIG_XIP_ROM_BASE must be a multiple of CONFIG_XIP_ROM_SIZE
-##
-default CONFIG_XIP_ROM_SIZE=32*1024
-default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE + CONFIG_ROM_IMAGE_SIZE - CONFIG_XIP_ROM_SIZE )
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-
-## ALL dependencies for CONFIG_USE_DCACHE_RAM go here.
-## That way, later, we can simply yank them if we wish.
-## We include the old-fashioned entry code in the ! CONFIG_USE_DCACHE_RAM case.
-## we do not use failover yet in this case. This is a work in progress.
-if CONFIG_USE_DCACHE_RAM
- ##
- ##
- mainboardinit arch/i386/init/entry.S
- mainboardinit arch/i386/init/car.S
- ldscript /arch/i386/init/ldscript.ld
-
- ## The main code for the rom section is called rom.c
- initobject rom.o
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
- end
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
- end
-
- ##
- ## Build our 16 bit and 32 bit coreboot entry code
- ##
- mainboardinit cpu/x86/16bit/entry16.inc
- mainboardinit cpu/x86/32bit/entry32.inc
- ldscript /cpu/x86/16bit/entry16.lds
- ldscript /cpu/x86/32bit/entry32.lds
-
- ##
- ## Build our reset vector (This is where coreboot is entered)
- ##
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-
- ##
- ## Setup RAM
- ##
- mainboardinit cpu/x86/fpu_enable.inc
- mainboardinit ./auto.inc
-
- ## the id string will be in cbfs. We will expect flashrom to parse cbfs for the idstring in future.
- ##
- ## Include an id string (For safe flashing)
- ##
- mainboardinit arch/i386/lib/id.inc
- ldscript /arch/i386/lib/id.lds
-
-##
-## end of CONFIG_USE_DCACHE_RAM bits.
-##
-end
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip cpu/emulation/qemu-x86
- device pci_domain 0 on
- device pci 0.0 on end
-
- chip southbridge/intel/i82371eb # southbridge
- device pci 01.0 on end
- device pci 01.1 on end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
-
-# register "com1" = "{1}"
-# register "com1" = "{1, 0, 0x3f8, 4}"
- end
-end
diff --git a/src/mainboard/emulation/qemu-x86/Options.lb b/src/mainboard/emulation/qemu-x86/Options.lb
deleted file mode 100644
index e0671284a8..0000000000
--- a/src/mainboard/emulation/qemu-x86/Options.lb
+++ /dev/null
@@ -1,140 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_COMPRESS
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_WRITE_HIGH_TABLES
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE
-
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-
-uses CONFIG_UDELAY_IO
-default CONFIG_UDELAY_IO=1
-
-default CONFIG_CONSOLE_SERIAL8250=1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=6
-
-default CONFIG_WRITE_HIGH_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Option ROM init
-##
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_PCI_OPTION_ROM_RUN_REALMODE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## known-good settings for qemu
-default CONFIG_DCACHE_RAM_BASE=0x8f000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-
-
-
-
-end
diff --git a/src/mainboard/gigabyte/ga-6bxc/Config.lb b/src/mainboard/gigabyte/ga-6bxc/Config.lb
deleted file mode 100644
index 663f58e153..0000000000
--- a/src/mainboard/gigabyte/ga-6bxc/Config.lb
+++ /dev/null
@@ -1,130 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/ite/it8671f # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.2 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.4 on # APC
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 3f0.6 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 3f0.7 on # GPIO
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/gigabyte/ga-6bxc/Options.lb b/src/mainboard/gigabyte/ga-6bxc/Options.lb
deleted file mode 100644
index 8189979485..0000000000
--- a/src/mainboard/gigabyte/ga-6bxc/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 6 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
deleted file mode 100644
index 6cca586272..0000000000
--- a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb
+++ /dev/null
@@ -1,270 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-## Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
-## Written by Morgan Tsai <my_tsai@sis.com> for SiS.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_CPU_OPT) $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/sis/sis966/romstrap.inc
- ldscript /southbridge/sis/sis966/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/sis/sis966/romstrap.inc
- ldscript /southbridge/sis/sis966/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_AM2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/sis/sis966
- device pci 0.0 on end # Northbridge
- device pci 1.0 on # AGP bridge
- device pci 0.0 on end
- end
- device pci 2.0 on # LPC
- chip superio/ite/it8716f
- device pnp 2e.0 off # Floppy (N/A)
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2 (N/A)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 off # Parallel port (N/A)
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 9
- end
- device pnp 2e.5 off # PS/2 keyboard (N/A)
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 off # Mouse (N/A)
- irq 0x70 = 12
- end
- device pnp 2e.8 off # MIDI (N/A)
- io 0x60 = 0x300
- irq 0x70 = 10
- end
- device pnp 2e.9 off # GAME (N/A)
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR (N/A)
- end
- end
-
- device pci 2.5 off end # IDE (SiS5513)
- device pci 2.6 off end # Modem (SiS7013)
- device pci 2.7 off end # Audio (SiS7012)
- device pci 3.0 on end # USB (SiS7001,USB1.1)
- device pci 3.1 on end # USB (SiS7001,USB1.1)
- device pci 3.3 on end # USB (SiS7002,USB2.0)
- device pci 4.0 on end # NIC (SiS191)
- device pci 5.0 on end # SATA (SiS1183,Native Mode)
- device pci 6.0 on end # PCI-e x1
- device pci 7.0 on end # PCI-e x1
- device pci a.0 off end
- device pci b.0 off end
- device pci c.0 off end
- device pci d.0 off end
- device pci e.0 off end
- device pci f.0 off end # HD Audio (SiS7502)
-
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- end
- end # device pci 18.0
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
deleted file mode 100644
index 6cbef12918..0000000000
--- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb
+++ /dev/null
@@ -1,354 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-## Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS)
-## Written by Morgan Tsai <my_tsai@sis.com> for SiS.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=0
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="ga_2761gxdk"
-default CONFIG_MAINBOARD_VENDOR="GIGABYTE"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1039
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD_NRV2B = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-### End Options.lb
-end
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
deleted file mode 100644
index c84d73c724..0000000000
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ /dev/null
@@ -1,362 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-if CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL
- object fanctl.o
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## ACPI Support
-##
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "iasl -p dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
- action "mv $(CURDIR)/dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_AM2
- device apic 0 on end
- end
-end
-device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/ite/it8716f
- # Floppy and any LDN
- device pnp 2e.0 on
- # Watchdog from CLKIN, CLKIN = 24 MHz
- irq 0x23 = 0x11
- # Serial Flash (SPI only)
- #0x24 = 0x1a
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 9
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 on # GPIO, SPI flash
- # pin 84 is not GP10
- irq 0x25 = 0x0
- # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
- irq 0x26 = 0x43
- # pin 13 is GP35
- irq 0x27 = 0x20
- # pin 70 is not GP46
- #irq 0x28 = 0x0
- # pin 6,3,128,127,126 is GP63,64,65,66,67
- irq 0x29 = 0x81
- # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
- #irq 0x2c = 0x1f
- # Simple I/O base
- io 0x62 = 0x800
- # Serial Flash I/O (SPI only)
- io 0x64 = 0x820
- # watch dog force timeout (parallel flash only)
- #irq 0x71 = 0x1
- # No WDT interrupt
- irq 0x72 = 0x0
- # GPIO pin set 1 disable internal pullup
- irq 0xb8 = 0x0
- # GPIO pin set 5 enable internal pullup
- irq 0xbc = 0x01
- # SIO pin set 1 alternate function
- #irq 0xc0 = 0x0
- # SIO pin set 2 mixed function
- irq 0xc1 = 0x43
- # SIO pin set 3 mixed function
- irq 0xc2 = 0x20
- # SIO pin set 4 alternate function
- #irq 0xc3 = 0x0
- # SIO pin set 1 input mode
- #irq 0xc8 = 0x0
- # SIO pin set 2 input mode
- irq 0xc9 = 0x0
- # SIO pin set 4 input mode
- #irq 0xcb = 0x0
- # Generate SMI# on EC IRQ
- #irq 0xf0 = 0x10
- # SMI# level trigger
- #irq 0xf1 = 0x40
- # HWMON alert beep pin location
- irq 0xf6 = 0x28
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 10
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
-#WTF?!? We already have device pci 1.1 in the section above
- device pci 1.1 on # SM 1
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 off end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end #device pci 18.0
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb
deleted file mode 100644
index 3010a2ad68..0000000000
--- a/src/mainboard/gigabyte/m57sli/Options.lb
+++ /dev/null
@@ -1,364 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_WRITE_HIGH_TABLES
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL
-
-uses CONFIG_ID_SECTION_OFFSET
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Set-up automatic fan control
-##
-default CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL=1
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## HIGH tables support
-default CONFIG_WRITE_HIGH_TABLES=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="m57sli"
-default CONFIG_MAINBOARD_VENDOR="GIGABYTE"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD_NRV2B = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/hp/dl145_g3/Config.lb b/src/mainboard/hp/dl145_g3/Config.lb
deleted file mode 100644
index 6c0508e217..0000000000
--- a/src/mainboard/hp/dl145_g3/Config.lb
+++ /dev/null
@@ -1,210 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006 AMD
-## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
-##
-## Copyright (C) 2007 University of Mannheim
-## Written by Philipp Degler <pdegler@rumms.uni-mannheim.e> for Uni of Mannheim
-##
-## Copyright (C) 2009 University of Heidelberg
-## Written by Mondrian Nuessle <nuessle@uni-hd.de> for Uni of Heidelberg
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-
-# config for hp/dl145_g3
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 # northbridge
- device pci 18.0 on # devices on link 0
- chip southbridge/broadcom/bcm21000 # HT2100
- device pci 0.0 on
- end # bridge to slot PCI-E 4x ??
- device pci 1.0 on
- end
- device pci 2.0 on
- end # unused
- device pci 3.0 on # bridge to slot PCI-E 16x ??
- end
- device pci 4.0 on
- end # unused
- device pci 5.0 on
- device pci 4.0 on end # BCM5715 NIC
- device pci 4.1 on end # BCM5715 NIC
- end
- end
- chip southbridge/broadcom/bcm5785 # HT1000
- device pci 0.0 on # HT PXB 0x0036
- device pci d.0 on end # PCI/PCI-X bridge 0x0104
- device pci e.0 on end # SATA 0x024a
- end
- device pci 1.0 on end # Legacy pci main 0x0205
- device pci 1.1 on end # IDE 0x0214
- device pci 1.2 on # LPC 0x0234
- chip superio/nsc/pc87417
- device pnp 4e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 4e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.3 off # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.4 off end # SWC
- device pnp 4e.5 off end # Mouse
- device pnp 4e.6 off # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 4e.7 off end # GPIO
- device pnp 4e.f off end # XBUS
- device pnp 4e.10 on #RTC
- io 0x60 = 0x70
- io 0x62 = 0x72
- end
- end # end superio
- end # end pci 1.2
- device pci 1.3 off end # WDTimer 0x0238
- device pci 1.4 on end # XIOAPIC0 0x0235
- device pci 1.5 on end # XIOAPIC1
- device pci 1.6 on end # XIOAPIC2
- device pci 2.0 on end # USB 0x0223
- device pci 2.1 on end # USB
- device pci 2.2 on end # USB
- device pci 3.0 on end # VGA
- end
- end
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # amdk8
-
- end #pci_domain
-end
-
-
diff --git a/src/mainboard/hp/dl145_g3/Options.lb b/src/mainboard/hp/dl145_g3/Options.lb
deleted file mode 100644
index 5ae7fb27c5..0000000000
--- a/src/mainboard/hp/dl145_g3/Options.lb
+++ /dev/null
@@ -1,328 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006 AMD
-## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
-##
-## Copyright (C) 2007 University of Mannheim
-## Written by Philipp Degler <pdegler@rumms.uni-mannheim.de> for Uni Mannheim
-## Copyright (C) 2009 University of Heidelberg
-## Written by Mondrian Nuessle <nuessle@uni-heidelberg.de> for University of Heidelberg
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x8
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=0
-
-#HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x06
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x01
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcc000
-default CONFIG_DCACHE_RAM_SIZE=0x04000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="DL145 G3"
-default CONFIG_MAINBOARD_VENDOR="HP"
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-#enabel printk in CAR by default
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/hp/e_vectra_p2706t/Config.lb b/src/mainboard/hp/e_vectra_p2706t/Config.lb
deleted file mode 100644
index c158b8178b..0000000000
--- a/src/mainboard/hp/e_vectra_p2706t/Config.lb
+++ /dev/null
@@ -1,128 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-# TODO: i810E actually!
-chip northbridge/intel/i82810 # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # Onboard VGA
- chip southbridge/intel/i82801xx # Southbridge
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1e.0 on end # PCI bridge
- device pci 1f.0 on # ISA/LPC bridge
- # TODO: PC87364 actually!
- # TODO: Check Super I/O settings and compare to superiotool -d.
- chip superio/nsc/pc87360 # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # PS/2 mouse
- device pnp 2e.6 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.8 off end # ACB
- device pnp 2e.9 off end # FSCM
- device pnp 2e.a off end # WDT
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.2 on end # USB
- device pci 1f.3 on end # SMBus
- device pci 1f.5 on end # AC'97 audio
- device pci 1f.6 off end # AC'97 modem (N/A ?)
- end
- end
-end
-
diff --git a/src/mainboard/hp/e_vectra_p2706t/Options.lb b/src/mainboard/hp/e_vectra_p2706t/Options.lb
deleted file mode 100644
index ff43b4f129..0000000000
--- a/src/mainboard/hp/e_vectra_p2706t/Options.lb
+++ /dev/null
@@ -1,101 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_WRITE_HIGH_TABLES
-uses CONFIG_VIDEO_MB
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 3
-default CONFIG_MAINBOARD_VENDOR = "HP"
-default CONFIG_MAINBOARD_PART_NUMBER = "e-Vectra P2706T"
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_VGA_ROM_RUN = 1
-default CONFIG_WRITE_HIGH_TABLES = 1
-default CONFIG_VIDEO_MB = 1
-end
diff --git a/src/mainboard/ibm/e325/Config.lb b/src/mainboard/ibm/e325/Config.lb
deleted file mode 100644
index ad37abadd2..0000000000
--- a/src/mainboard/ibm/e325/Config.lb
+++ /dev/null
@@ -1,185 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT 0
- device pci 18.0 on # LDT 1
- chip southbridge/amd/amd8131
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/nsc/pc87366
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.8 off end # ACB
- device pnp 2e.9 off end # FSCM
- device pnp 2e.a off end # WDT
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- end
- end # device pci 18.0
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- end
-end
-
diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb
deleted file mode 100644
index a745e187d1..0000000000
--- a/src/mainboard/ibm/e325/Options.lb
+++ /dev/null
@@ -1,221 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=1
-default CONFIG_MAX_PHYSICAL_CPUS=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="E325"
-default CONFIG_MAINBOARD_VENDOR="IBM"
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb
deleted file mode 100644
index 08109ee165..0000000000
--- a/src/mainboard/ibm/e326/Config.lb
+++ /dev/null
@@ -1,178 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT 0
- device pci 18.0 on # LDT 1
- chip southbridge/amd/amd8131
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- device pci 5.0 on end # ATI Rage XL
- end
- device pci 1.0 on
- chip superio/nsc/pc87366
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.8 off end # ACB
- device pnp 2e.9 off end # FSCM
- device pnp 2e.a off end # WDT
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb
deleted file mode 100644
index 265ae756da..0000000000
--- a/src/mainboard/ibm/e326/Options.lb
+++ /dev/null
@@ -1,227 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-#VGA
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="E326"
-default CONFIG_MAINBOARD_VENDOR="IBM"
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/iei/juki-511p/Config.lb b/src/mainboard/iei/juki-511p/Config.lb
deleted file mode 100644
index c87ea5c70e..0000000000
--- a/src/mainboard/iei/juki-511p/Config.lb
+++ /dev/null
@@ -1,157 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (coreboot plus bootloader) will live in the boot rom chip.
-##
-default CONFIG_ROM_SIZE = 256 * 1024
-
-##
-## Compute where this copy of coreboot will start in the boot rom
-##
-default CONFIG_ROMBASE = (0xffffffff - CONFIG_ROM_SIZE + CONFIG_ROM_SECTION_OFFSET + 1)
-
-##
-## Compute a range of ROM that can cached to speed up coreboot,
-## execution speed.
-##
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-## CONFIG_XIP_ROM_BASE must be a multiple of CONFIG_XIP_ROM_SIZE
-##
-default CONFIG_XIP_ROM_SIZE=65536
-default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE + CONFIG_ROM_IMAGE_SIZE - CONFIG_XIP_ROM_SIZE )
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-mainboardinit cpu/x86/16bit/reset16.inc
-ldscript /cpu/x86/16bit/reset16.lds
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-#dir /pc80
-#config chip.h
-
-chip northbridge/amd/gx1
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/amd/cs5530
-
- device pci 12.0 on
- chip superio/winbond/w83977f
- device pnp 3f0.0 on # FDC
- irq 0x70 = 6
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- register "com1" = "{115200}"
- device pnp 3f0.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- register "com2" = "{115200}"
- device pnp 3f0.4 on # RTC
- io 0x60 = 0x070
- irq 0x70 = 8
- end
- device pnp 3f0.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Int 1 for PS/2 keyboard
- irq 0x72 = 12 # Int 12 for PS/2 mouse
- end
- device pnp 3f0.6 off # IR
- end
- device pnp 3f0.7 off # GPIO1
- end
- device pnp 3f0.8 off # GPIO
- end
- end
- device pci 12.1 on end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA onboard
-
- end
-
- device pci 0e.0 on end # ETH0
- device pci 13.0 on end # USB
-
- end
- end
-
- chip cpu/amd/model_gx1
- end
-
-end
-
diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb
deleted file mode 100644
index d7fde57fd0..0000000000
--- a/src/mainboard/iei/juki-511p/Options.lb
+++ /dev/null
@@ -1,145 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_UDELAY_IO
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_COMPRESS
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_VIDEO_MB
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-default CONFIG_UDELAY_IO=1
-##
-## Build code to export a programmable irq routing table
-##
-# FIXME: There's an irq_tables.c file, but CONFIG_GENERATE_PIRQ_TABLE is 0.
-default CONFIG_GENERATE_PIRQ_TABLE=0
-default CONFIG_IRQ_SLOT_COUNT=2
-default CONFIG_PIRQ_ROUTE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-default CONFIG_VIDEO_MB = 0
-
-end
diff --git a/src/mainboard/iei/nova4899r/Config.lb b/src/mainboard/iei/nova4899r/Config.lb
deleted file mode 100644
index 3fd6ce70dd..0000000000
--- a/src/mainboard/iei/nova4899r/Config.lb
+++ /dev/null
@@ -1,163 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-#dir /pc80
-#config chip.h
-
-chip northbridge/amd/gx1
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/amd/cs5530
- device pci 0a.0 on end # ETH0
- device pci 0b.0 off end # ETH1
- device pci 0c.0 on end # ETH2
- device pci 0f.0 on end # PCI slot
- device pci 12.0 on
- chip superio/winbond/w83977tf
- device pnp 2e.0 on # FDC
- irq 0x70 = 6
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- register "com1" = "{115200}"
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- register "com2" = "{115200}"
- device pnp 2e.4 off # Reserved
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 0x01 # Int 1 for PS/2 keyboard
- irq 0x72 = 0x0c # Int 12 for PS/2 mouse
- end
- device pnp 2e.6 on # IR
- io 0x60 = 0x2e8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # GAME/MIDI/GPIO1
- io 0x60 = 0x290
- end
- device pnp 2e.8 on # GPIO2
- io 0x60 = 0x110
- end
- device pnp 2e.9 on # GPIO3
- io 0x60 = 0x120
- end
- device pnp 2e.A on # Power Management
- io 0x60 = 0xe800
- end
- end
- device pci 12.1 on end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA onboard
- end
- device pci 13.0 on end # USB
- end
- end
-
- chip cpu/amd/model_gx1
- end
-
-end
-
diff --git a/src/mainboard/iei/nova4899r/Options.lb b/src/mainboard/iei/nova4899r/Options.lb
deleted file mode 100644
index 564a441836..0000000000
--- a/src/mainboard/iei/nova4899r/Options.lb
+++ /dev/null
@@ -1,172 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_VIDEO_MB
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=0
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=5
-default CONFIG_PIRQ_ROUTE=1
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-default CONFIG_VIDEO_MB = 0
-
-end
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb
deleted file mode 100644
index 39fc0df5ac..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb
+++ /dev/null
@@ -1,136 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
- # Compile cache_as_ram.c to auto.inc.
- makerule ./cache_as_ram_auto.inc
- # depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end # Northbridge
- device pci 1.1 on end # Graphics
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
- register "lpc_serirq_enable" = "0x0000105a"
- register "lpc_serirq_polarity" = "0x0000EFA5"
- register "lpc_serirq_mode" = "1"
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "1" # 0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci 9.0 on end # Slot1
- device pci a.0 on end # Slot2
- device pci b.0 on end # Slot3
- device pci c.0 on end # Slot4
- device pci e.0 on end # Ethernet 0
- device pci 10.0 on end # Ethernet 1
- device pci 11.0 on end # SATA
- device pci f.0 on # ISA Bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b off end # HW Monitor
- end
- end
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-end
-
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb b/src/mainboard/iei/pcisa-lx-800-r10/Options.lb
deleted file mode 100644
index 6ff46bfba7..0000000000
--- a/src/mainboard/iei/pcisa-lx-800-r10/Options.lb
+++ /dev/null
@@ -1,106 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESS
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_IO
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_VIDEO_MB = 8
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_IO = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 9
-default CONFIG_PIRQ_ROUTE = 1
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_ROM_IMAGE_SIZE = 32 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xc8000
-default CONFIG_DCACHE_RAM_SIZE = 32 * 1024
-default CONFIG_USE_PRINTK_IN_CAR=1
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/intel/d945gclf/Config.lb b/src/mainboard/intel/d945gclf/Config.lb
deleted file mode 100644
index 6671471132..0000000000
--- a/src/mainboard/intel/d945gclf/Config.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-##
-## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
-##
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Image size calculation
-##
-
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-driver rtl8168.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl"
- action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl"
- action "mv $(CURDIR)/dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- ldscript /cpu/x86/car/cache_as_ram.lds
-end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/intel/model_106cx/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i945
-
- device apic_cluster 0 on
- chip cpu/intel/socket_441
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- device pci 00.0 on end # host bridge
- device pci 01.0 off end # i945 PCIe root port
- device pci 02.0 on end # vga controller
- device pci 02.1 on end # display controller
-
- chip southbridge/intel/i82801gx
- register "pirqa_routing" = "0x05"
- register "pirqb_routing" = "0x07"
- register "pirqc_routing" = "0x05"
- register "pirqd_routing" = "0x07"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x06"
-
- # GPI routing
- # 0 No effect (default)
- # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- # 2 SCI (if corresponding GPIO_EN bit is also set)
- register "gpi13_routing" = "1"
- register "gpe0_en" = "0x20000601"
-
- register "ide_legacy_combined" = "0x1"
- register "ide_enable_primary" = "0x1"
- register "ide_enable_secondary" = "0x0"
- register "sata_ahci" = "0x0"
-
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe
- device pci 1c.1 on end # PCIe
- device pci 1c.2 on end # PCIe
- #device pci 1c.3 off end # PCIe port 4
- #device pci 1c.4 off end # PCIe port 5
- #device pci 1c.5 off end # PCIe port 6
- device pci 1d.0 on end # USB UHCI
- device pci 1d.1 on end # USB UHCI
- device pci 1d.2 on end # USB UHCI
- device pci 1d.3 on end # USB UHCI
- device pci 1d.7 on end # USB2 EHCI
- device pci 1e.0 on end # PCI bridge
- #device pci 1e.2 off end # AC'97 Audio
- #device pci 1e.3 off end # AC'97 Modem
- device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47m15x
- device pnp 2e.0 off # Floppy
- end
- device pnp 2e.3 off # Parport
- end
- device pnp 2e.4 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
- end
- device pnp 2e.7 on # Keyboard+Mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- irq 0xf0 = 0x82 # HW accel A20.
- end
- device pnp 2e.8 on # GAME
- # all default
- end
- device pnp 2e.a on # PME
- end
- device pnp 2e.b on # MPU
- end
- end
- end
- #device pci 1f.1 off end # IDE
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- #device pci 1f.4 off end # Realtek ID Codec
- end
- end
-end
diff --git a/src/mainboard/intel/d945gclf/Options.lb b/src/mainboard/intel/d945gclf/Options.lb
deleted file mode 100644
index 9660b9f569..0000000000
--- a/src/mainboard/intel/d945gclf/Options.lb
+++ /dev/null
@@ -1,329 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-# Tables
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-# SMP
-uses CONFIG_SMP
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_AP_IN_SIPI_WAIT
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-# Image Size
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-# Payload
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-# Build Internals
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_PCIE_CONFIGSPACE_HOLE
-uses CONFIG_MMCONF_SUPPORT
-uses CONFIG_MMCONF_BASE_ADDRESS
-uses CONFIG_GFXUMA
-
-#
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-# Timers
-uses CONFIG_UDELAY_LAPIC
-# Console
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_DEBUG
-# Toolchain
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-# Tweaks
-uses CONFIG_GDB_STUB
-uses CONFIG_MAX_REBOOT_CNT
-uses CONFIG_USE_WATCHDOG_ON_BOOT
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-
-###
-### Build options
-###
-
-##
-##
-default CONFIG_MAX_REBOOT_CNT=3
-
-##
-## Use the watchdog to break out of a lockup condition
-##
-default CONFIG_USE_WATCHDOG_ON_BOOT=0
-
-##
-## ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=CONFIG_FALLBACK_SIZE*2
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-##
-default CONFIG_UDELAY_LAPIC=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=1
-
-##
-## Leave a hole for mmapped PCIe config space
-##
-
-default CONFIG_PCIE_CONFIGSPACE_HOLE=1
-default CONFIG_MMCONF_SUPPORT=1
-default CONFIG_MMCONF_BASE_ADDRESS=0xf0000000
-
-##
-## UMA
-##
-default CONFIG_GFXUMA=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=18
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-default CONFIG_HAVE_ACPI_RESUME=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default CONFIG_coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-# There are some network option roms that don't work with
-# coreboot's x86emu. Thus, we only execute the VGA option rom
-# for now:
-default CONFIG_VGA_ROM_RUN=1
-default CONFIG_PCI_ROM_RUN=0
-default CONFIG_DEBUG=0
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-default CONFIG_AP_IN_SIPI_WAIT=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_BASE=0xffed8000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Execute In Place settings
-##
-
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE - CONFIG_XIP_ROM_SIZE + CONFIG_ROM_IMAGE_SIZE )
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="D945GCLF"
-default CONFIG_MAINBOARD_VENDOR= "INTEL"
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x464c
-
-###
-### coreboot layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 0xb800
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/intel/eagleheights/Config.lb b/src/mainboard/intel/eagleheights/Config.lb
deleted file mode 100644
index ea76cad821..0000000000
--- a/src/mainboard/intel/eagleheights/Config.lb
+++ /dev/null
@@ -1,212 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Thomas Jourdan <thomas.jourdan@gmail.com>
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-##
-## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
-##
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv $(CURDIR)/dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- ldscript /cpu/x86/car/cache_as_ram.lds
-end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-## Use Intel Core (not Core 2) code for CAR init, any CPU might be used.
-mainboardinit cpu/intel/model_6ex/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i3100
- device pci_domain 0 on
- device pci 00.0 on end # IMCH
- device pci 00.1 on end # IMCH error status
- device pci 01.0 on end # IMCH EDMA engine
- device pci 02.0 on end # PCIe port A/A0
- device pci 03.0 on end # PCIe port A1
- chip southbridge/intel/i3100
- # PIRQ line -> legacy IRQ mappings
- register "pirq_a_d" = "0x8b808a8a"
- register "pirq_e_h" = "0x85808080"
-
- device pci 1c.0 on end # PCIe port B0
- device pci 1c.1 off end # PCIe port B1
- device pci 1c.2 off end # PCIe port B2
- device pci 1c.3 off end # PCIe port B3
- device pci 1d.0 on end # USB (UHCI) 1
- device pci 1d.1 on end # USB (UHCI) 2
- device pci 1d.7 on end # USB (EHCI)
- device pci 1e.0 on end # PCI bridge
- device pci 1f.0 on # LPC bridge
- chip superio/intel/i3100
- device pnp 4e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.5 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- end
- chip superio/smsc/smscsuperio
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.2 off # Serial Port 4
- io 0x60 = 0x2e8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 2
- end
- device pnp 2e.4 off # Serial Port 3
- io 0x60 = 0x3e8
- irq 0x70 = 4
- end
- device pnp 2e.7 on # PS/2 Keyboard / Mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 2e.a off # Runtime registers
- io 0x60 = 0x600
- end
- end
- end
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- device pci 1f.4 on end # Performance counters
- end
- end
- device apic_cluster 0 on
- chip cpu/intel/bga956
- device apic 0 on end
- end
- end
-end
-
diff --git a/src/mainboard/intel/eagleheights/Options.lb b/src/mainboard/intel/eagleheights/Options.lb
deleted file mode 100644
index 3a2e7b68c6..0000000000
--- a/src/mainboard/intel/eagleheights/Options.lb
+++ /dev/null
@@ -1,323 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-# Tables
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-# SMP
-uses CONFIG_SMP
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_AP_IN_SIPI_WAIT
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-# Image Size
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-# Payload
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-# Build Internals
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_PCIE_CONFIGSPACE_HOLE
-uses CONFIG_MMCONF_SUPPORT
-uses CONFIG_MMCONF_BASE_ADDRESS
-#
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-# Timers
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-# Console
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_DEBUG
-uses CONFIG_VGA
-uses CONFIG_PCI_OPTION_ROM_RUN_YABEL
-# Toolchain
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-# Tweaks
-uses CONFIG_GDB_STUB
-uses CONFIG_MAX_REBOOT_CNT
-uses CONFIG_USE_WATCHDOG_ON_BOOT
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-
-###
-### Build options
-###
-
-##
-##
-default CONFIG_MAX_REBOOT_CNT=3
-
-##
-## Use the watchdog to break out of a lockup condition
-##
-default CONFIG_USE_WATCHDOG_ON_BOOT=0
-
-##
-## ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Leave a hole for mmapped PCIe config space
-##
-default CONFIG_PCIE_CONFIGSPACE_HOLE=1
-default CONFIG_MMCONF_SUPPORT=1
-default CONFIG_MMCONF_BASE_ADDRESS=0xE0000000
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=0
-# There are some network option roms that don't work with
-# coreboot's x86emu. Thus, we only execute the VGA option rom
-# for now:
-default CONFIG_VGA_ROM_RUN=0
-default CONFIG_PCI_ROM_RUN=0
-default CONFIG_DEBUG=0
-
-#default CONFIG_VGA=0
-#default CONFIG_PCI_OPTION_ROM_RUN_YABEL=0
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-default CONFIG_AP_IN_SIPI_WAIT=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_BASE=( 0xfff00000 - CONFIG_DCACHE_RAM_SIZE - 1024*1024)
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="EagleHeights"
-default CONFIG_MAINBOARD_VENDOR= "Intel"
-
-###
-### coreboot layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-default CONFIG_PRECOMPRESSED_PAYLOAD=1
-default CONFIG_COMPRESSED_PAYLOAD_LZMA=1
-#default CONFIG_COMPRESSED_PAYLOAD_NRV2B=0
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/intel/jarrell/Config.lb b/src/mainboard/intel/jarrell/Config.lb
deleted file mode 100644
index 722ba4027b..0000000000
--- a/src/mainboard/intel/jarrell/Config.lb
+++ /dev/null
@@ -1,182 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p4 -fno-simplify-phi -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520
- device pci_domain 0 on
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 01.0 on end
- device pci 02.0 on
- chip southbridge/intel/pxhd # pxhd1
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 00.2 on
- chip drivers/generic/generic
- device pci 04.0 on end
- device pci 04.1 on end
- end
- end
- device pci 00.3 on end
- end
- end
- device pci 06.0 on end
- chip southbridge/intel/i82801er # i82801er
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 off end
- device pci 1d.7 on end
- device pci 1e.0 on
- chip drivers/ati/ragexl
- device pci 0c.0 on end
- end
- end
- device pci 1f.0 on
- chip superio/nsc/pc87427
- device pnp 2e.0 off end
- device pnp 2e.2 on
-# io 0x60 = 0x2f8
-# irq 0x70 = 3
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
-# io 0x60 = 0x3f8
-# irq 0x70 = 4
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 on
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a off end
- device pnp 2e.f on end
- device pnp 2e.10 off end
- device pnp 2e.14 off end
- end
- end
- device pci 1f.1 on end
- device pci 1f.2 off end
- device pci 1f.3 on end
- device pci 1f.5 off end
- device pci 1f.6 off end
- register "gpio[40]" = "ICH5R_GPIO_USE_AS_GPIO"
- register "gpio[48]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_OUTPUT | ICH5R_GPIO_LVL_LOW"
- register "gpio[41]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_INPUT"
- end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # cpu 0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # cpu 1
- device apic 6 on end
- end
- end
-end
diff --git a/src/mainboard/intel/jarrell/Options.lb b/src/mainboard/intel/jarrell/Options.lb
deleted file mode 100644
index 91927eee0d..0000000000
--- a/src/mainboard/intel/jarrell/Options.lb
+++ /dev/null
@@ -1,242 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-uses CONFIG_MAX_REBOOT_CNT
-uses CONFIG_USE_WATCHDOG_ON_BOOT
-
-
-###
-### Build options
-###
-
-##
-## Because we do the stutter start we need more attempts
-##
-default CONFIG_MAX_REBOOT_CNT=8
-
-##
-## Use the watchdog to break out of a lockup condition
-##
-default CONFIG_USE_WATCHDOG_ON_BOOT=1
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=2097152
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=18
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="SE7520JR22D"
-default CONFIG_MAINBOARD_VENDOR= "Intel"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1079
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3437
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/intel/mtarvon/Config.lb b/src/mainboard/intel/mtarvon/Config.lb
deleted file mode 100644
index 026c45d40e..0000000000
--- a/src/mainboard/intel/mtarvon/Config.lb
+++ /dev/null
@@ -1,160 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Arastra, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License version 2 as
-## published by the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=p4 -fno-simplify-phi -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i3100
- device pci_domain 0 on
- device pci 00.0 on end # IMCH
- device pci 00.1 on end # IMCH error status
- device pci 01.0 on end # IMCH EDMA engine
- device pci 02.0 on end # PCIe port A/A0
- device pci 03.0 on end # PCIe port A1
- chip southbridge/intel/i3100
- # PIRQ line -> legacy IRQ mappings
- register "pirq_a_d" = "0x0b070a05"
- register "pirq_e_h" = "0x0a808080"
-
- device pci 1c.0 on end # PCIe port B0
- device pci 1c.1 on end # PCIe port B1
- device pci 1c.2 on end # PCIe port B2
- device pci 1c.3 on end # PCIe port B3
- device pci 1d.0 on end # USB (UHCI) 1
- device pci 1d.1 on end # USB (UHCI) 2
- device pci 1d.7 on end # USB (EHCI)
- device pci 1e.0 on end # PCI bridge
- device pci 1e.2 on end # audio
- device pci 1e.3 on end # modem
- device pci 1f.0 on # LPC bridge
- chip superio/intel/i3100
- device pnp 4e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.5 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- end
- end
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA479M
- device apic 0 on end
- end
- end
-end
diff --git a/src/mainboard/intel/mtarvon/Options.lb b/src/mainboard/intel/mtarvon/Options.lb
deleted file mode 100644
index 7d99620274..0000000000
--- a/src/mainboard/intel/mtarvon/Options.lb
+++ /dev/null
@@ -1,225 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Arastra, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License version 2 as
-## published by the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE = 2 * 1024 * 1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=1
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="Mt. Arvon"
-default CONFIG_MAINBOARD_VENDOR= "Intel"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2680
-
-###
-### Coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/intel/truxton/Config.lb b/src/mainboard/intel/truxton/Config.lb
deleted file mode 100644
index 5e032487d7..0000000000
--- a/src/mainboard/intel/truxton/Config.lb
+++ /dev/null
@@ -1,170 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Arastra, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License version 2 as
-## published by the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=p4 -fno-simplify-phi -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i3100
- device pci_domain 0 on
- device pci 00.0 on end # IMCH
- device pci 00.1 on end # IMCH error status
- device pci 01.0 on end # IMCH EDMA engine
- device pci 02.0 on end # PCIe port A/A0
- device pci 03.0 on end # PCIe port A1
- device pci 04.0 on end # ?
- device pci 08.0 off end # must be off to boot
- device pci 0d.0 off end # must be off to boot
- device pci 0d.1 off end # must be off to boot
- chip southbridge/intel/i3100
- # PIRQ line -> legacy IRQ mappings
- register "pirq_a_d" = "0x0b070a05"
- register "pirq_e_h" = "0x0a808080"
-
- device pci 1d.0 on end # USB (UHCI)
- device pci 1d.7 on end # USB (EHCI)
- device pci 1f.0 on # LPC bridge
- chip superio/intel/i3100
- device pnp 4e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.5 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- end
- chip superio/smsc/smscsuperio
- device pnp 2e.0 off end
- device pnp 2e.3 off end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.7 on # PS/2 keyboard / mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 2e.a off end
- end
- end
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- device pci 1f.4 on end # ?
- end
- end
- device apic_cluster 0 on
- chip cpu/intel/ep80579
- device apic 0 on end
- end
- end
-end
diff --git a/src/mainboard/intel/truxton/Options.lb b/src/mainboard/intel/truxton/Options.lb
deleted file mode 100644
index dab3f45b77..0000000000
--- a/src/mainboard/intel/truxton/Options.lb
+++ /dev/null
@@ -1,236 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Arastra, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License version 2 as
-## published by the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_RAMTOP
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE = 2 * 1024 * 1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=1
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="Truxton"
-default CONFIG_MAINBOARD_VENDOR= "Intel"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2680
-
-###
-### Coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## in order to have coreboot running at 0x100000, RAMTOP has to be set
-##
-default CONFIG_RAMTOP = 2*1024*1024
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-# Enable the VGA console.
-default CONFIG_CONSOLE_VGA=1
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-
-end
diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb
deleted file mode 100644
index 1f0534c8c0..0000000000
--- a/src/mainboard/intel/xe7501devkit/Config.lb
+++ /dev/null
@@ -1,174 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_ACPI_TABLES object acpi_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FALLBACK_BOOT
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-
-config chip.h
-
-# based on sample config for tyan/s2735
-chip northbridge/intel/e7501
- device pci_domain 0 on
- device pci 0.0 on end # Chipset host controller
- device pci 0.1 on end # Host RASUM controller
- device pci 2.0 on # Hub interface B
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 3.0 off end # Hub interface C (82808AA connector - disable for now)
- device pci 4.0 on # Hub interface D
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 6.0 on end # E7501 Power management registers? (undocumented)
- chip southbridge/intel/i82801ca
- device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at)
- device pci 1d.1 off end # USB (not populated)
- device pci 1d.2 off end # USB (not populated)
- device pci 1e.0 on # Hub to PCI bridge
- device pci 0.0 on end
- end
- device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47b272
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.a off end # ACPI
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end # AC97 Audio
- device pci 1f.6 off end # AC97 Modem
- end # SB
- end # PCI_DOMAIN
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604
- device apic 6 on end
- end
- end
-end
diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb
deleted file mode 100644
index 6968f311af..0000000000
--- a/src/mainboard/intel/xe7501devkit/Options.lb
+++ /dev/null
@@ -1,238 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_DEBUG
-#uses CONFIG_CPU_OPT
-
-## These are defined in target Config.lb, don't add here
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_FALLBACK_SIZE
-uses COREBOOT_EXTRA_VERSION
-
-## These are defined in mainboard Config.lb, don't add here
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-
-uses CONFIG_HAVE_HARD_RESET
-
-default CONFIG_HAVE_HARD_RESET = 1
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=2097152
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Build code for the fallback boot?
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## Build code to export ACPI tables?
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table?
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-## CMOS checksum definitions (units == bytes)
-## These must match the checksum record in cmos.layout
-default CONFIG_LB_CKS_RANGE_START=128
-default CONFIG_LB_CKS_RANGE_END=130
-default CONFIG_LB_CKS_LOC=131
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-## NOTE: CONFIG_MAX_CPUS is the number of LOGICAL CPUs,
-## so if CONFIG_LOGICAL_CPUS is 1, CONFIG_MAX_CPUS should be 4.
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_LOGICAL_CPUS=0
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-# VGA Console
-# NOTE: to initialize VGA, need to copy the VGA option ROM from the factory BIOS
-# to VGA.rom
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Motherboard identification
-##
-default CONFIG_MAINBOARD_PART_NUMBER="EIDXE7501DEVKIT"
-default CONFIG_MAINBOARD_VENDOR="Intel"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480
-
-###
-### coreboot layout values
-###
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## CMOS settings not currently supported due to conflicts with factory BIOS
-##
-default CONFIG_USE_OPTION_TABLE = 0
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_DEBUG=1
-# default CONFIG_CPU_OPT="-g"
-
-### End Options.lb
-end
diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb
deleted file mode 100644
index c5019183dd..0000000000
--- a/src/mainboard/iwill/dk8_htx/Config.lb
+++ /dev/null
@@ -1,337 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE
- object mptable.o
-end
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
-#if CONFIG_GENERATE_ACPI_TABLES
-# object acpi_tables.o
-# object fadt.o
-# if CONFIG_SB_HT_CHAIN_ON_BUS0
-# object dsdt_bus0.o
-# else
-# object dsdt.o
-# end
-# object ssdt.o
-# if CONFIG_ACPI_SSDTX_NUM
-# if CONFIG_SB_HT_CHAIN_ON_BUS0
-# object ssdt2_bus0.o
-# else
-# object ssdt2.o
-# end
-# end
-#end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "mv dsdt_lb.hex dsdt.c"
- end
- object ./dsdt.o
-
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-
- if CONFIG_ACPI_SSDTX_NUM
- makerule ssdt2.c
- depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
- action "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
- action "mv pci2.hex ssdt2.c"
- end
- object ./ssdt2.o
- makerule ssdt3.c
- depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
- action "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
- action "mv pci3.hex ssdt3.c"
- end
- object ./ssdt3.o
- makerule ssdt4.c
- depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
- action "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
- action "mv pci4.hex ssdt4.c"
- end
- object ./ssdt4.o
- makerule ssdt5.c
- depends "$(CONFIG_MAINBOARD)/dx/pci5.asl"
- action "iasl -p $(CURDIR)/pci5 -tc $(CONFIG_MAINBOARD)/dx/pci5.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
- action "mv pci5.hex ssdt5.c"
- end
- object ./ssdt5.o
- end
-end
-
- if CONFIG_USE_INIT
- # compile cache_as_ram.c to auto.o
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-dir /southbridge/amd/amd8132
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on # northbridge
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 on # GPIO2
- io 0x07 = 0x08ff
- io 0x30 = 0x01ff
- io 0x2b = 0xd0ff
- io 0xf0 = 0xef16
- end
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end #pci_domain
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# end
-
-end
-
-
diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb
deleted file mode 100644
index f35afb4f81..0000000000
--- a/src/mainboard/iwill/dk8_htx/Options.lb
+++ /dev/null
@@ -1,326 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-8K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 8K
-default CONFIG_FAILOVER_SIZE=0x02000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=3
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0xa
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc4000
-default CONFIG_DCACHE_RAM_SIZE=0x0c000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## for rev F training on AP purpose
-##
-#default CONFIG_AP_CODE_IN_CAR=1
-#default CONFIG_MEM_TRAIN_SEQ=1
-#default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="dk8_htx"
-default CONFIG_MAINBOARD_VENDOR="IWILL"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/iwill/dk8s2/Config.lb b/src/mainboard/iwill/dk8s2/Config.lb
deleted file mode 100644
index a5fee1b9ee..0000000000
--- a/src/mainboard/iwill/dk8s2/Config.lb
+++ /dev/null
@@ -1,196 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-## ATI Rage XL framebuffering graphics driver
-dir /drivers/ati/ragexl
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# config for iwill/dk8s2
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT 0
- chip southbridge/amd/amd8131
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- register "com1" = "{1}"
- # register "com1" = "{1, 0, 0x3f8, 4}"
- # register "lpt" = "{1}"
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- end
- end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- end
-end
-
diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb
deleted file mode 100644
index 911a54bc2c..0000000000
--- a/src/mainboard/iwill/dk8s2/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=524288
-
-###
-### Build options
-###
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="HDAMA"
-default CONFIG_MAINBOARD_VENDOR="ARIMA"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-#default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-#default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/iwill/dk8x/Config.lb b/src/mainboard/iwill/dk8x/Config.lb
deleted file mode 100644
index 478074e0fc..0000000000
--- a/src/mainboard/iwill/dk8x/Config.lb
+++ /dev/null
@@ -1,171 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627thf
- device pnp 2e.0 on end
- device pnp 2e.1 on end
- device pnp 2e.2 on end
- device pnp 2e.3 on end
- device pnp 2e.4 on end
- device pnp 2e.5 on end
- device pnp 2e.6 on end
- device pnp 2e.7 on end
- device pnp 2e.8 on end
- device pnp 2e.9 on end
- device pnp 2e.a on end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- end
- end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- end
-end
-
diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb
deleted file mode 100644
index 5cc8161ab1..0000000000
--- a/src/mainboard/iwill/dk8x/Options.lb
+++ /dev/null
@@ -1,227 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=524288
-
-###
-### Build options
-###
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Clean up the motherboard id strings
-##
-#default CONFIG_MAINBOARD_PART_NUMBER="HDAMA"
-#default CONFIG_MAINBOARD_VENDOR="ARIMA"
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-#default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-#default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/jetway/j7f24/Config.lb b/src/mainboard/jetway/j7f24/Config.lb
deleted file mode 100644
index 8e0b498067..0000000000
--- a/src/mainboard/jetway/j7f24/Config.lb
+++ /dev/null
@@ -1,136 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/via/cn700 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # AGP Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # Memory Controller
- device pci 0.4 on end # Power Management
- device pci 0.7 on end # V-Link Controller
- device pci 1.0 on end # PCI Bridge
- chip southbridge/via/vt8237r # Southbridge
- # Enable both IDE channels.
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- # Both cables are 40pin.
- register "ide0_80pin_cable" = "0"
- register "ide1_80pin_cable" = "0"
- register "fn_ctrl_lo" = "0x80"
- register "fn_ctrl_hi" = "0x1d"
- device pci a.0 on end # Firewire
- device pci f.0 on end # SATA
- device pci f.1 on end # IDE
- device pci 10.0 on end # OHCI
- device pci 10.1 on end # OHCI
- device pci 10.2 on end # OHCI
- device pci 10.3 on end # OHCI
- device pci 10.4 on end # EHCI
- device pci 11.0 on # Southbridge LPC
- chip superio/fintek/f71805f # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0xec00
- end
- end
- end
- device pci 11.5 on end # AC'97 audio
- # device pci 11.6 off end # AC'97 Modem
- device pci 12.0 on end # Ethernet
- end
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/via/model_c7 # VIA C7
- device apic 0 on end # APIC
- end
- end
-end
diff --git a/src/mainboard/jetway/j7f24/Options.lb b/src/mainboard/jetway/j7f24/Options.lb
deleted file mode 100644
index e65706dbe5..0000000000
--- a/src/mainboard/jetway/j7f24/Options.lb
+++ /dev/null
@@ -1,96 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_VIDEO_MB
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_IOAPIC = 1
-default CONFIG_VIDEO_MB = 32
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 10
-default CONFIG_GENERATE_ACPI_TABLES = 0
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_USE_FALLBACK_IMAGE = 1
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-#default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
-default HOSTCC = "gcc"
-
-end
diff --git a/src/mainboard/kontron/986lcd-m/Config.lb b/src/mainboard/kontron/986lcd-m/Config.lb
deleted file mode 100644
index 66ada57c65..0000000000
--- a/src/mainboard/kontron/986lcd-m/Config.lb
+++ /dev/null
@@ -1,270 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-##
-## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
-##
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Image size calculation
-##
-
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-driver rtl8168.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl"
- action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl"
- action "mv $(CURDIR)/dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- ldscript /cpu/x86/car/cache_as_ram.lds
-end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/intel/model_6ex/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i945
-
- device apic_cluster 0 on
- chip cpu/intel/socket_mFCPGA478
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- device pci 00.0 on end # host bridge
- # autodetect 0:1.0 because it might or might not be there.
- # device pci 01.0 off end # i945 PCIe root port
- device pci 02.0 on end # vga controller
- device pci 02.1 on end # display controller
-
- chip southbridge/intel/i82801gx
- register "pirqa_routing" = "0x05"
- register "pirqb_routing" = "0x07"
- register "pirqc_routing" = "0x05"
- register "pirqd_routing" = "0x07"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x06"
-
- # GPI routing
- # 0 No effect (default)
- # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- # 2 SCI (if corresponding GPIO_EN bit is also set)
- register "gpi13_routing" = "1"
- register "gpe0_en" = "0x00000400"
-
- register "ide_legacy_combined" = "0x1"
- register "ide_enable_primary" = "0x1"
- register "ide_enable_secondary" = "0x1"
- register "sata_ahci" = "0x0"
-
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe
- device pci 1c.1 on end # PCIe
- device pci 1c.2 on end # PCIe
- #device pci 1c.3 off end # PCIe port 4
- #device pci 1c.4 off end # PCIe port 5
- #device pci 1c.5 off end # PCIe port 6
- device pci 1d.0 on end # USB UHCI
- device pci 1d.1 on end # USB UHCI
- device pci 1d.2 on end # USB UHCI
- device pci 1d.3 on end # USB UHCI
- device pci 1d.7 on end # USB2 EHCI
- device pci 1e.0 on end # PCI bridge
- #device pci 1e.2 off end # AC'97 Audio
- #device pci 1e.3 off end # AC'97 Modem
- device pci 1f.0 on # LPC bridge
- chip superio/winbond/w83627thg
- device pnp 2e.0 off # Floppy
- end
- device pnp 2e.1 off # Parport
- end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
- end
- device pnp 2e.5 on # Keyboard+Mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- irq 0xf0 = 0x82 # HW accel A20.
- end
- device pnp 2e.7 on # GPIO1, GAME, MIDI
- io 0x62 = 0x330
- irq 0x70 = 9
- end
- device pnp 2e.8 on # GPIO2
- # all default
- end
- device pnp 2e.9 on # GPIO3/4
- irq 0x30 = 0x03 # does this work?
- irq 0xf0 = 0xfb # set inputs/outputs
- irq 0xf1 = 0x66
- end
- device pnp 2e.a off # ACPI
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0xa00
- irq 0x70 = 0
- end
-
- end
- chip superio/winbond/w83627thg
- device pnp 4e.0 off # Floppy
- end
- device pnp 4e.1 off # Parport
- end
- device pnp 4e.2 on # COM3
- io 0x60 = 0x3e8
- irq 0x70 = 11
- end
- device pnp 4e.3 on # COM4
- io 0x60 = 0x2e8
- irq 0x70 = 10
- end
- device pnp 4e.5 off # Keyboard
- end
- device pnp 4e.7 off # GPIO1, GAME, MIDI
- end
- device pnp 4e.8 off # GPIO2
- end
- device pnp 4e.9 off # GPIO3/4
- end
- device pnp 4e.a off # ACPI
- end
- device pnp 4e.b off # HWM
- end
- end
-
- end
- #device pci 1f.1 off end # IDE
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- #device pci 1f.4 off end # Realtek ID Codec
- end
- end
-end
diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb
deleted file mode 100644
index 811d8efdb3..0000000000
--- a/src/mainboard/kontron/986lcd-m/Options.lb
+++ /dev/null
@@ -1,328 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-# Tables
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-# SMP
-uses CONFIG_SMP
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_AP_IN_SIPI_WAIT
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-# Image Size
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-# Payload
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-# Build Internals
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_PCIE_CONFIGSPACE_HOLE
-uses CONFIG_MMCONF_SUPPORT
-uses CONFIG_MMCONF_BASE_ADDRESS
-uses CONFIG_GFXUMA
-
-#
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-# Timers
-uses CONFIG_UDELAY_LAPIC
-# Console
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_DEBUG
-# Toolchain
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-# Tweaks
-uses CONFIG_GDB_STUB
-uses CONFIG_MAX_REBOOT_CNT
-uses CONFIG_USE_WATCHDOG_ON_BOOT
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-
-###
-### Build options
-###
-
-##
-##
-default CONFIG_MAX_REBOOT_CNT=3
-
-##
-## Use the watchdog to break out of a lockup condition
-##
-default CONFIG_USE_WATCHDOG_ON_BOOT=0
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-##
-default CONFIG_UDELAY_LAPIC=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=1
-
-##
-## Leave a hole for mmapped PCIe config space
-##
-
-default CONFIG_PCIE_CONFIGSPACE_HOLE=1
-default CONFIG_MMCONF_SUPPORT=1
-default CONFIG_MMCONF_BASE_ADDRESS=0xf0000000
-
-##
-## UMA
-##
-default CONFIG_GFXUMA=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=18
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-default CONFIG_HAVE_ACPI_RESUME=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-# There are some network option roms that don't work with
-# coreboot's x86emu. Thus, we only execute the VGA option rom
-# for now:
-default CONFIG_VGA_ROM_RUN=1
-default CONFIG_PCI_ROM_RUN=0
-default CONFIG_DEBUG=0
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-default CONFIG_AP_IN_SIPI_WAIT=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_BASE=( 0xfff00000 - CONFIG_DCACHE_RAM_SIZE - 1024*1024)
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Execute In Place settings
-##
-
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE - CONFIG_XIP_ROM_SIZE + CONFIG_ROM_IMAGE_SIZE )
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="986LCD-M"
-default CONFIG_MAINBOARD_VENDOR= "KONTRON"
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 0x10000
-
-##
-## Use a small 32K stack
-##
-default CONFIG_STACK_SIZE=0x8000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/kontron/kt690/Config.lb b/src/mainboard/kontron/kt690/Config.lb
deleted file mode 100644
index 3cddb5166e..0000000000
--- a/src/mainboard/kontron/kt690/Config.lb
+++ /dev/null
@@ -1,262 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE
- object get_bus_conf.o
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
- if CONFIG_USE_INIT
-
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-#The variables belong to mainboard are defined here.
-
-#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
-#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
-#Define gfx_dual_slot, 0: single slot, 1: dual slot
-#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
-#Define gfx_tmds, 0: didn't support TMDS, 1: support
-#Define gfx_compliance, 0: didn't support compliance, 1: support
-#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
-#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_S1G1
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # southbridge
- chip southbridge/amd/rs690
- device pci 0.0 on end # HT 0x7910
- device pci 1.0 on # Internal Graphics P2P bridge 0x7912
- device pci 5.0 on end # Internal Graphics 0x791F
- end
- device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
- device pci 3.0 off end # PCIE P2P bridge 0x791b
- device pci 4.0 on end # PCIE P2P bridge 0x7914
- device pci 5.0 on end # PCIE P2P bridge 0x7915
- device pci 6.0 on end # PCIE P2P bridge 0x7916
- device pci 7.0 on end # PCIE P2P bridge 0x7917
- device pci 8.0 off end # NB/SB Link P2P bridge
- register "gpp_configuration" = "4"
- register "port_enable" = "0xfc"
- register "gfx_dev2_dev3" = "1"
- register "gfx_dual_slot" = "0"
- register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "0"
- register "gfx_compliance" = "0"
- register "gfx_reconfiguration" = "1"
- register "gfx_link_width" = "0"
- end
- chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
- device pci 12.0 on end # SATA 0x4380
- device pci 13.0 on end # USB 0x4387
- device pci 13.1 on end # USB 0x4388
- device pci 13.2 on end # USB 0x4389
- device pci 13.3 on end # USB 0x438a
- device pci 13.4 on end # USB 0x438b
- device pci 13.5 on end # USB 2 0x4386
- device pci 14.0 on # SM 0x4385
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x438c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x438d
- chip superio/winbond/w83627dhg
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- #device pnp 2e.6 off # SPI
- #end
- device pnp 2e.7 off # GPIO
- end
- device pnp 2e.8 on # WDTO#, PLED
- end
- device pnp 2e.9 off # GPIO
- end
- device pnp 2e.a off # ACPI
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0xa10
- end
- device pnp 2e.c off # PECI, SST
- end
- end #superio/winbond/w83627dhg
- #chip superio/smsc/fdc37n972
- # seems this chip is not used?
- #end
- end #LPC
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # ACI 0x4382
- device pci 14.6 on end # MCI 0x438e
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "hda_viddid" = "0x10ec0888"
- end #southbridge/amd/sb600
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end #northbridge/amd/amdk8
- end #pci_domain
-end #northbridge/amd/amdk8/root_complex
-
diff --git a/src/mainboard/kontron/kt690/Options.lb b/src/mainboard/kontron/kt690/Options.lb
deleted file mode 100644
index 6e3ad131eb..0000000000
--- a/src/mainboard/kontron/kt690/Options.lb
+++ /dev/null
@@ -1,301 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-## Copyright (C) 2009 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_VIDEO_MB
-uses CONFIG_GFXUMA
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-#default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#256K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-# BTDC: Only one HT device on Herring.
-#HT Unit ID offset
-#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-
-#real SB Unit ID
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
-
-#make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="KT690"
-default CONFIG_MAINBOARD_VENDOR="KONTRON"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1488
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6900
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 32K stack
-##
-default CONFIG_STACK_SIZE=0x8000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_VIDEO_MB=1
-default CONFIG_GFXUMA=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-
-end
diff --git a/src/mainboard/lippert/frontrunner/Config.lb b/src/mainboard/lippert/frontrunner/Config.lb
deleted file mode 100644
index 06147ed82f..0000000000
--- a/src/mainboard/lippert/frontrunner/Config.lb
+++ /dev/null
@@ -1,112 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx2
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/amd/cs5535
- device pci 12.0 on
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 off end # Audio
- device pci 12.4 off end # VGA
- end
- end
- end
-
- chip cpu/amd/model_gx2
- end
-
-end
-
diff --git a/src/mainboard/lippert/frontrunner/Options.lb b/src/mainboard/lippert/frontrunner/Options.lb
deleted file mode 100644
index e6a9b48cad..0000000000
--- a/src/mainboard/lippert/frontrunner/Options.lb
+++ /dev/null
@@ -1,159 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/lippert/roadrunner-lx/Config.lb b/src/mainboard/lippert/roadrunner-lx/Config.lb
deleted file mode 100644
index ed6d61eec0..0000000000
--- a/src/mainboard/lippert/roadrunner-lx/Config.lb
+++ /dev/null
@@ -1,198 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## Based on Config.lb from AMD's DB800 and DBM690T mainboards.
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- # compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary configuration files
-##
-dir /pc80
-config chip.h
-
-# Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off Live LED.
-register "sio_gp1x_config" = "0x20"
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end # Northbridge
- device pci 1.1 on end # Graphics
- device pci 1.2 on end # AES
- chip southbridge/amd/cs5536 # Southbridge
- # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power...
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
- # UARTs, etc IRQs. OK
- register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010
- register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above
- register "lpc_serirq_mode" = "1"
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" # 0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3E8"
- register "com1_irq" = "6"
- register "com2_enable" = "0"
- register "com2_address" = "0x2E8"
- register "com2_irq" = "6"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci 8.0 on end # Slot4
- device pci 9.0 on end # Slot3
- device pci a.0 on end # Slot2
- device pci b.0 on end # Slot1
- device pci c.0 on end # IT8888
- device pci e.0 on end # Ethernet
- device pci f.0 on # ISA bridge
- chip superio/ite/it8712f
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 9
- end
- device pnp 2e.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 on # GPIO
- io 0x62 = 0x1220
- # io 0x64 = 0x1200
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.9 off # Game port
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end
- end
- device pci f.2 on end # IDE controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-end
diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb
deleted file mode 100644
index b9ca9db796..0000000000
--- a/src/mainboard/lippert/roadrunner-lx/Options.lb
+++ /dev/null
@@ -1,206 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## Based on Options.lb from AMD's DB800 mainboard.
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESS
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEBUG
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 512 * 1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_VIDEO_MB = 8
-default CONFIG_PCI_ROM_RUN = 0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE = 0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET = 0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7
-default CONFIG_PIRQ_ROUTE = 1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE = 0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xc8000
-default CONFIG_DCACHE_RAM_SIZE = 0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE = 8 * 1024
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE = 16 * 1024
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250 = 1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD = 115200
-#default CONFIG_TTYS0_BAUD = 57600
-#default CONFIG_TTYS0_BAUD = 38400
-#default CONFIG_TTYS0_BAUD = 19200
-#default CONFIG_TTYS0_BAUD = 9600
-#default CONFIG_TTYS0_BAUD = 4800
-#default CONFIG_TTYS0_BAUD = 2400
-#default CONFIG_TTYS0_BAUD = 1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE = 0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS = 0x3
-
-# Compile extra debugging code
-default CONFIG_DEBUG = 1
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
-
-end
diff --git a/src/mainboard/lippert/spacerunner-lx/Config.lb b/src/mainboard/lippert/spacerunner-lx/Config.lb
deleted file mode 100644
index 8d2052b13e..0000000000
--- a/src/mainboard/lippert/spacerunner-lx/Config.lb
+++ /dev/null
@@ -1,199 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## Based on Config.lb from AMD's DB800 and DBM690T mainboards.
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- # compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an ID string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup.
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary configuration files
-##
-dir /pc80
-config chip.h
-
-# See also SMC_CONFIG in cache_as_ram_auto.c.
-# Bit0 turns off Live LED, bit1 switches Com1 to RS485, bit2 same for Com2.
-register "sio_gp1x_config" = "0x01"
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end # Northbridge
- device pci 1.1 on end # Graphics
- device pci 1.2 on end # AES
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
- # UARTs, etc IRQs. OK
- register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010
- register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above
- register "lpc_serirq_mode" = "1"
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" # 0:host, 1:device
- register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3E8"
- register "com1_irq" = "6"
- register "com2_enable" = "0"
- register "com2_address" = "0x2E8"
- register "com2_irq" = "6"
- register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8
- register "unwanted_vpci[1]" = "0" # End of list has a zero
- device pci 8.0 on end # Slot4
- device pci 9.0 on end # Slot3
- device pci a.0 on end # Slot2
- device pci b.0 on end # Slot1
- device pci c.0 on end # IT8888
- device pci e.0 on end # Ethernet
- device pci f.0 on # ISA Bridge
- chip superio/ite/it8712f
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # EC
- io 0x60 = 0x290
- io 0x62 = 0x230
- irq 0x70 = 9
- end
- device pnp 2e.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 on # GPIO
- io 0x62 = 0x1220
- io 0x64 = 0x1200
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.9 off # Game port
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end
- end
- device pci f.2 on end # IDE
- device pci f.3 off end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-end
diff --git a/src/mainboard/lippert/spacerunner-lx/Options.lb b/src/mainboard/lippert/spacerunner-lx/Options.lb
deleted file mode 100644
index 5bb104bf9a..0000000000
--- a/src/mainboard/lippert/spacerunner-lx/Options.lb
+++ /dev/null
@@ -1,206 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## Based on Options.lb from AMD's DB800 mainboard.
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESS
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEBUG
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 512*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_VIDEO_MB = 8
-default CONFIG_PCI_ROM_RUN = 0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE = 0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET = 0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7
-default CONFIG_PIRQ_ROUTE = 1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE = 0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xc8000
-default CONFIG_DCACHE_RAM_SIZE = 0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE = 0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE = 0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250 = 1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD = 115200
-#default CONFIG_TTYS0_BAUD = 57600
-#default CONFIG_TTYS0_BAUD = 38400
-#default CONFIG_TTYS0_BAUD = 19200
-#default CONFIG_TTYS0_BAUD = 9600
-#default CONFIG_TTYS0_BAUD = 4800
-#default CONFIG_TTYS0_BAUD = 2400
-#default CONFIG_TTYS0_BAUD = 1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE = 0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS = 0x3
-
-# Compile extra debugging code
-default CONFIG_DEBUG = 1
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
-
-end
diff --git a/src/mainboard/mitac/6513wu/Config.lb b/src/mainboard/mitac/6513wu/Config.lb
deleted file mode 100644
index a6480bd585..0000000000
--- a/src/mainboard/mitac/6513wu/Config.lb
+++ /dev/null
@@ -1,138 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Michael Gold <mgold@ncf.ca>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- # Note: The -mcpu=p2 is important, or else... 'too few registers'.
- action "../romcc -mcpu=p2 -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- # Note: The -mcpu=p2 is important, or else... 'too few registers'.
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82810 # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Graphics Memory Controller Hub (GMCH)
- device pci 1.0 on end
- chip southbridge/intel/i82801xx # Southbridge
- register "pirqa_routing" = "0x03"
- register "pirqb_routing" = "0x05"
- register "pirqc_routing" = "0x09"
- register "pirqd_routing" = "0x0b"
-
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1e.0 on # PCI bridge
- device pci 5.0 on end # Audio controller (ESS ES1988)
- end
- device pci 1f.0 on # ISA bridge
- chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47U332)
- device pnp 4e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 4e.4 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.5 on # MIDI port (MPU-401)
- io 0x60 = 0x330
- irq 0x70 = 10
- end
- device pnp 4e.7 on # PS/2 keyboard / mouse
- io 0x60 = 0x60 # XXX: not relocatable
- io 0x62 = 0x64 # XXX: not relocatable
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 4e.9 on # Game port
- io 0x60 = 0x201
- end
- device pnp 4e.a on # Runtime registers
- io 0x60 = 0x400
- end
- device pnp 4e.b off end # SMBus
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.2 on end # USB
- device pci 1f.3 on end # SMbus
- device pci 1f.5 off end # Audio controller
- device pci 1f.6 off end # Modem
- end
- end
-end
diff --git a/src/mainboard/mitac/6513wu/Options.lb b/src/mainboard/mitac/6513wu/Options.lb
deleted file mode 100644
index 0dac44bb03..0000000000
--- a/src/mainboard/mitac/6513wu/Options.lb
+++ /dev/null
@@ -1,108 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Michael Gold <mgold@ncf.ca>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CC
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_OBJCOPY
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_VIDEO_MB
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_XIP_ROM_SIZE
-uses COREBOOT_EXTRA_VERSION
-uses HOSTCC
-
-# Motherboard info, tables, etc.
-default CONFIG_MAINBOARD_VENDOR = "Mitac"
-default CONFIG_MAINBOARD_PART_NUMBER = "6513WU"
-default CONFIG_IRQ_SLOT_COUNT = 8
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_USE_OPTION_TABLE = 0
-
-# ROM layout
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_ROM_PAYLOAD = 1
-
-# RAM layout
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-
-# Misc. settings
-default CONFIG_USE_INIT = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-
-# Compiler setup
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-
-# Console settings
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 7 # No debugging/spew
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-
-# Enable onboard video
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_VIDEO_MB = 1
-
-end
diff --git a/src/mainboard/msi/ms6119/Config.lb b/src/mainboard/msi/ms6119/Config.lb
deleted file mode 100644
index 79bc904d64..0000000000
--- a/src/mainboard/msi/ms6119/Config.lb
+++ /dev/null
@@ -1,133 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.9 on # GPIO 3
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/msi/ms6119/Options.lb b/src/mainboard/msi/ms6119/Options.lb
deleted file mode 100644
index 7930819f12..0000000000
--- a/src/mainboard/msi/ms6119/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/msi/ms6147/Config.lb b/src/mainboard/msi/ms6147/Config.lb
deleted file mode 100644
index 73f79cbef1..0000000000
--- a/src/mainboard/msi/ms6147/Config.lb
+++ /dev/null
@@ -1,141 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Mats Erik Andersson <mats.andersson@gisladisker.org>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.7 on # GPIO 1
- end
- device pnp 3f0.8 on # GPIO 2
- end
- device pnp 3f0.9 off # GPIO 3
- end
- device pnp 3f0.a on # ACPI
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "1"
- register "ide0_drive1_udma33_enable" = "1"
- register "ide1_drive0_udma33_enable" = "1"
- register "ide1_drive1_udma33_enable" = "1"
- end
- end
-end
diff --git a/src/mainboard/msi/ms6147/Options.lb b/src/mainboard/msi/ms6147/Options.lb
deleted file mode 100644
index e6ccb87bd8..0000000000
--- a/src/mainboard/msi/ms6147/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Mats Erik Andersson <mats.andersson@gisladisker.org>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 8 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/msi/ms6156/Config.lb b/src/mainboard/msi/ms6156/Config.lb
deleted file mode 100644
index 0a93cc772e..0000000000
--- a/src/mainboard/msi/ms6156/Config.lb
+++ /dev/null
@@ -1,134 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/winbond/w83977tf # Super I/O
- device pnp 3f0.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 3f0.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 3f0.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 3f0.3 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 3f0.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard interrupt
- irq 0x72 = 12 # PS/2 mouse interrupt
- end
- device pnp 3f0.7 off # GPIO 1
- end
- device pnp 3f0.8 off # GPIO 2
- end
- device pnp 3f0.9 off # GPIO 3
- end
- device pnp 3f0.a off # ACPI
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- device pci 14.0 on end # Onboard audio (Ensoniq ES1371)
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "1"
- register "ide0_drive1_udma33_enable" = "1"
- register "ide1_drive0_udma33_enable" = "1"
- register "ide1_drive1_udma33_enable" = "1"
- end
- end
-end
diff --git a/src/mainboard/msi/ms6156/Options.lb b/src/mainboard/msi/ms6156/Options.lb
deleted file mode 100644
index 8d6de68a61..0000000000
--- a/src/mainboard/msi/ms6156/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7
-default CONFIG_MAINBOARD_VENDOR = "MSI"
-default CONFIG_MAINBOARD_PART_NUMBER = "MS-6156"
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/msi/ms6178/Config.lb b/src/mainboard/msi/ms6178/Config.lb
deleted file mode 100644
index 3f77f30555..0000000000
--- a/src/mainboard/msi/ms6178/Config.lb
+++ /dev/null
@@ -1,133 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82810 # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # Onboard VGA
- chip southbridge/intel/i82801xx # Southbridge
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1e.0 on end # PCI bridge
- device pci 1f.0 on # ISA/LPC bridge
- chip superio/winbond/w83627hf # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2 (only header on board)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # PS/2 keyboard/mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.6 off end # Consumer IR (TODO)
- device pnp 2e.7 on # Game port / MIDI / GPIO 1
- io 0x60 = 0x201
- io 0x62 = 0x330
- irq 0x70 = 9
- end
- device pnp 2e.8 on end # GPIO 2
- device pnp 2e.9 on end # GPIO 3
- device pnp 2e.a on end # ACPI
- device pnp 2e.b on # Hardware monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.2 on end # USB
- device pci 1f.3 on end # SMBus
- device pci 1f.5 on end # AC'97 audio
- device pci 1f.6 on end # AC'97 modem
- end
- end
-end
-
diff --git a/src/mainboard/msi/ms6178/Options.lb b/src/mainboard/msi/ms6178/Options.lb
deleted file mode 100644
index 04660f0c55..0000000000
--- a/src/mainboard/msi/ms6178/Options.lb
+++ /dev/null
@@ -1,99 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_WRITE_HIGH_TABLES
-uses CONFIG_VIDEO_MB
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 4 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_WRITE_HIGH_TABLES = 1
-default CONFIG_VIDEO_MB = 1
-end
diff --git a/src/mainboard/msi/ms7135/Config.lb b/src/mainboard/msi/ms7135/Config.lb
deleted file mode 100644
index adc58a9a11..0000000000
--- a/src/mainboard/msi/ms7135/Config.lb
+++ /dev/null
@@ -1,241 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
-## (Thanks to LSRA University of Mannheim for their support)
-## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/ati/ragexl
-
-# Needed by irq_tables and mptable and acpi_tables.
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE
- object mptable.o
-end
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code.
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (this is where coreboot is entered).
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an ID string (for safe flashing).
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup.
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex # Root complex
- device apic_cluster 0 on # APIC cluster
- chip cpu/amd/socket_754 # Socket 754 CPU
- device apic 0 on end # APIC
- end
- end
-
- device pci_domain 0 on # PCI domain
- chip northbridge/amd/amdk8 # mc0
- device pci 18.0 on # Northbridge
- # Devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627thf # Super I/O
- device pnp 4e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 4e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 4e.7 off end # Game, MIDI, GPIO 1, GPIO 5
- device pnp 4e.8 off end # GPIO 2
- device pnp 4e.9 off end # GPIO 3, GPIO 4
- device pnp 4e.a off end # ACPI
- device pnp 4e.b on # Hardware monitor
- io 0x60 = 0x290
- irq 0x70 = 0
- end
- end
- end
- device pci 1.1 on end # SMbus
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # Onboard audio (ACI)
- device pci 4.1 off end # Onboard modem (MCI) -- not wired out
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on end # PCI
- device pci a.0 on end # NIC
- device pci b.0 off end # PCI E 3 -- not wired out
- device pci c.0 off end # PCI E 2 -- not wired out
- device pci d.0 on end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- # register "mac_eeprom_smbus" = "3"
- # register "mac_eeprom_addr" = "0x51"
- end
- end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
diff --git a/src/mainboard/msi/ms7135/Options.lb b/src/mainboard/msi/ms7135/Options.lb
deleted file mode 100644
index b3b2b4beaf..0000000000
--- a/src/mainboard/msi/ms7135/Options.lb
+++ /dev/null
@@ -1,321 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
-## (Thanks to LSRA University of Mannheim for their support)
-## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_AP_CODE_IN_CAR
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_MEM_TRAIN_SEQ
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-## ---> 512 Kbytes
-default CONFIG_ROM_SIZE=(512*1024)
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=(4*1024)
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=13
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x10
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-#default CONFIG_DCACHE_RAM_BASE=0xcf000
-#default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-
-## APIC stuff
-#default CONFIG_ENABLE_APIC_EXT_ID=0
-#default CONFIG_APIC_ID_OFFSET=0x10
-#default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="K8N Neo3 (MS-7135)"
-default CONFIG_MAINBOARD_VENDOR="MSI"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x7135
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = (64*1024) - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#efault CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/msi/ms7260/Config.lb b/src/mainboard/msi/ms7260/Config.lb
deleted file mode 100644
index f420731f42..0000000000
--- a/src/mainboard/msi/ms7260/Config.lb
+++ /dev/null
@@ -1,288 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-driver mainboard.o
-object get_bus_conf.o # Needed by irq_tables and mptable (and acpi_tables).
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-# ROMSTRAP table for MCP55.
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex # Root complex
- device apic_cluster 0 on # APIC cluster
- chip cpu/amd/socket_AM2 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- chip northbridge/amd/amdk8 # Northbridge / mc0
- device pci 18.0 on
- # Devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55 # Southbridge
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627ehg # Super I/O
- device pnp 4e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 4e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.3 on # Com2 / IrDA
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # PS/2 keyboard IRQ
- irq 0x72 = 12 # PS/2 mouse IRQ
- end
- device pnp 4e.6 off # Serial flash interface
- # io 0x62 = 0x100
- end
- device pnp 4e.7 off # GPIO1/6, game port, MIDI port
- # io 0x60 = 0x220 # Datasheet: 0x201
- # io 0x62 = 0x300 # Datasheet: 0x330
- # irq 0x70 = 9
- end
- device pnp 4e.8 off # WDTO#, PLED
- end
- device pnp 4e.9 off # GPIO2/3/4/5, SUSLED
- end
- device pnp 4e.a off # ACPI
- end
- device pnp 4e.b on # HWM (for lm-sensors)
- io 0x60 = 0xa10
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic # DIMM 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic # DIMM 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic # DIMM 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic # DIMM 0-1-1
- device i2c 53 on end
- end
- # TODO: Needed?
- # chip drivers/generic/generic # DIMM 1-0-0
- # device i2c 54 on end
- # end
- # chip drivers/generic/generic # DIMM 1-0-1
- # device i2c 55 on end
- # end
- # chip drivers/generic/generic # DIMM 1-1-0
- # device i2c 56 on end
- # end
- # chip drivers/generic/generic # DIMM 1-1-1
- # device i2c 57 on end
- # end
- end
- # TODO: Check if the stuff below is correct / needed.
- device pci 1.1 on # SM 1
- # PCI device SMBus address will depend on addon PCI device,
- # do we need to scan_smbus_bus?
-
- # chip drivers/generic/generic # PCIXA Slot1
- # device i2c 50 on end
- # end
- # chip drivers/generic/generic # PCIXB Slot1
- # device i2c 51 on end
- # end
- # chip drivers/generic/generic # PCIXB Slot2
- # device i2c 52 on end
- # end
- # chip drivers/generic/generic # PCI Slot1
- # device i2c 53 on end
- # end
- # chip drivers/generic/generic # Master MCP55 PCI-E
- # device i2c 54 on end
- # end
- # chip drivers/generic/generic # Slave MCP55 PCI-E
- # device i2c 55 on end
- # end
- chip drivers/generic/generic # MAC EEPROM
- device i2c 51 on end
- end
- end
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 off end # SATA 2 (N/A on this board)
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA (HD Audio)
- device pci 8.0 on end # NIC
- device pci 9.0 off end # NIC (N/A on this board)
- device pci a.0 off end # PCI E 5 (N/A on this board?)
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- # TODO: Check the two lines below.
- register "mac_eeprom_smbus" = "3" # 1: SMBus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-
-# TODO
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-
-end
diff --git a/src/mainboard/msi/ms7260/Options.lb b/src/mainboard/msi/ms7260/Options.lb
deleted file mode 100644
index 1be372ae6c..0000000000
--- a/src/mainboard/msi/ms7260/Options.lb
+++ /dev/null
@@ -1,188 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER # ?
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_SERIAL_CPU_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_PCI_64BIT_PREF_MEM
-uses CONFIG_RAMTOP
-uses CONFIG_AP_CODE_IN_CAR
-uses CONFIG_MEM_TRAIN_SEQ
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_ID_SECTION_OFFSET
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE = 4 * 1024
-default CONFIG_RAMTOP = 2048*1024 # 1MB more for pgtbl.
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_FAILOVER_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 11 # TODO: Check if correct.
-default CONFIG_GENERATE_MP_TABLE = 1 # TODO: Check if correct.
-default CONFIG_HAVE_OPTION_TABLE = 1
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-# default CONFIG_SERIAL_CPU_INIT = 0
-default CONFIG_ENABLE_APIC_EXT_ID = 0
-default CONFIG_APIC_ID_OFFSET = 0x10
-default CONFIG_LIFT_BSP_APIC_ID = 1
-
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-
-# Memory hole size. 0 means disable, others will enable the hole. In that
-# case, if it is smaller than mmio_basek, it will use mmio_basek instead.
-# default CONFIG_HW_MEM_HOLE_SIZEK = 0x200000 # 2GB
-default CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 # 1GB
-# default CONFIG_HW_MEM_HOLE_SIZEK = 0x80000 # 512MB
-
-# Make auto increase hole size to avoid hole_startk equal to basek so as
-# to make some kernel happy.
-# default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC = 1
-
-# Opteron K8 1G HT support.
-default CONFIG_K8_HT_FREQ_1G_SUPPORT = 1
-
-# HT Unit ID offset, default is 1, the typical one, 0 means only one HT device.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0
-
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x6
-
-# Make the SB HT chain on bus 0, default is not (0).
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 2
-
-# Only offset for SB chain? Default is yes (1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-
-# Allow capable device use that above 4GB.
-# default CONFIG_PCI_64BIT_PREF_MEM = 1
-
-default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
-default CONFIG_PCI_ROM_RUN = 1 # Needed for VGA.
-default CONFIG_USBDEBUG_DIRECT = 0
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xc8000
-default CONFIG_DCACHE_RAM_SIZE = 0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
-default CONFIG_USE_INIT = 0
-default CONFIG_AP_CODE_IN_CAR = 0
-default CONFIG_MEM_TRAIN_SEQ = 2
-default CONFIG_WAIT_BEFORE_CPUS_INIT = 0
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_PART_NUMBER = "K9N Neo (MS-7260)"
-default CONFIG_MAINBOARD_VENDOR = "MSI"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x7260
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-default CONFIG_STACK_SIZE = 0x2000
-default CONFIG_HEAP_SIZE = 0x8000
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE)
-default CONFIG_RAMBASE = 0x00100000
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_USE_PRINTK_IN_CAR = 1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-end
diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb
deleted file mode 100644
index c3bddcfe1f..0000000000
--- a/src/mainboard/msi/ms9185/Config.lb
+++ /dev/null
@@ -1,231 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006 AMD
-## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
-##
-## Copyright (C) 2006 MSI
-## Written by bxshi <bingxunshi@gmail.com> for MSI.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE
- object mptable.o
-end
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- if CONFIG_USE_INIT
- # compile cache_as_ram.c to auto.o
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for amd/serengeti_cheetah
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on # northbridge
- # devices on link 0
- chip southbridge/broadcom/bcm5780 # HT2000
- device pci 0.0 on end # PXB 1 0x0130
- device pci 1.0 on # PXB 2 0x0130
- device pci 4.0 on end # GB E 0x1668 vid = 0x14e4
- device pci 4.1 on end # GB E 0x1669 vid = 0x14e4
- end
- device pci 2.0 on end # PCI E 1 #0x0132
- device pci 3.0 on end # PCI E 2
- device pci 4.0 on end # PCI E 3
- device pci 5.0 on end # PCI E 4
- end
- chip southbridge/broadcom/bcm5785 # HT1000
- device pci 0.0 on # HT PXB 0x0036
- device pci d.0 on end # PPBX 0x0104
- device pci e.0 on end # SATA 0x024a
- device pci e.1 on end # SATA 0x024a bx_a001
- device pci e.2 on end # SATA 0x024a bx_a001
- device pci e.3 on end # SATA 0x024a bx_a001
- end
- device pci 1.0 on # Legacy pci main 0x0205
- end
- device pci 1.1 on end # IDE 0x0214
- device pci 1.2 on # LPC 0x0234
- chip superio/nsc/pc87417
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.f off end # XBUS
- device pnp 2e.10 on #RTC
- io 0x60 = 0x70
- io 0x62 = 0x72
- end
- end
- end
- device pci 1.3 on end # WDTimer 0x0238
- device pci 1.4 on end # XIOAPIC0 0x0235
- device pci 1.5 on end # XIOAPIC1
- device pci 1.6 on end # XIOAPIC2
- device pci 2.0 on end # USB 0x0223
- device pci 2.1 on end # USB
- device pci 2.2 on end # USB
- device pci 3.0 on end # it is in bcm5785_0 bus
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # amdk8
- end #pci_domain
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# end
-
-end
-
-
diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb
deleted file mode 100644
index d3423f59e1..0000000000
--- a/src/mainboard/msi/ms9185/Options.lb
+++ /dev/null
@@ -1,327 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006 AMD
-## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
-##
-## Copyright (C) 2006 MSI
-## Written by bxshi <bingxunshi@gmail.com> for MSI.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-#default CONFIG_GENERATE_ACPI_TABLES=1
-## extra SSDT num
-#default CONFIG_ACPI_SSDTX_NUM=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x8
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x06
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x01
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcc000
-default CONFIG_DCACHE_RAM_SIZE=0x04000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="MS9185"
-default CONFIG_MAINBOARD_VENDOR="MSI"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/msi/ms9282/Config.lb b/src/mainboard/msi/ms9282/Config.lb
deleted file mode 100644
index ec1211e7b4..0000000000
--- a/src/mainboard/msi/ms9282/Config.lb
+++ /dev/null
@@ -1,322 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006 AMD
-## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
-##
-## Copyright (C) 2006 MSI
-## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/ati/ragexl
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
-end
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-
-# sample config for msi/ms9282
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627ehg
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SERIAL_FALSH
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/i2c/i2cmux2 # pca9554 smbus mux
- device i2c 70 on #0 pca9554 1
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 57 on end
- end
- end
- device i2c 70 on #0 pca9554 2
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 57 on end
- end
- end
- end
- end
- device pci 1.1 on # SM 1
- chip drivers/i2c/i2cmux2 # pca9554 smbus mux
- device i2c 72 on #pca9554 channle1
- chip drivers/i2c/adm1027 #HWM ADT7476 1
- device i2c 2e on end
- end
- end
- device i2c 72 on #pca9545 channel 2
- chip drivers/i2c/adm1027 #HWM ADT7463
- device i2c 2e on end
- end
- end
- device i2c 72 on end #pca9545 channel 3
- device i2c 72 on #pca9545 channel 4
- chip drivers/i2c/adm1027 #HWM ADT7476 2
- device i2c 2e on end
- end
- end
- end
- end
-
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on #P2P
- device pci 4.0 on end
- end # P2P
- device pci 7.0 on end # reserve
- device pci 8.0 on end # MAC0
- device pci 9.0 on end # MAC1
- device pci a.0 on
- device pci 0.0 on
- device pci 4.0 on end #pci_E lan1
- device pci 4.1 on end #pci_E lan2
- end
- end # 0x376
- device pci b.0 on end # PCI E 0x374
- device pci c.0 on end
- device pci d.0 on #SAS
- device pci 0.0 on end
- end # PCI E 1 0x378
- device pci e.0 on end # PCI E 0 0x375
- device pci f.0 on end #PCI E 0x377 pci_E slot
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- end
- end # device pci 18.0
- device pci 18.0 on end # Link 1
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end #mc0
-
- end # pci_domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end
-# device pnp 0.1 off end
-# device pnp 0.2 off end
-# device pnp 0.3 off end
-# device pnp 0.4 off end
-# device pnp 0.5 on end
-# end
-end # root_complex
diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb
deleted file mode 100644
index ee8be01679..0000000000
--- a/src/mainboard/msi/ms9282/Options.lb
+++ /dev/null
@@ -1,311 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006 AMD
-## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
-##
-## Copyright (C) 2006 MSI
-## Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-#bx_b001- uses K8_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-#bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-#bx_b005+
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-# stepan 2007-04-12
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-default CONFIG_ROM_SIZE=524288
-
-#1M bytes
-#bx- default CONFIG_ROM_SIZE=1048576
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-#bx_b001- default K8_HW_MEM_HOLE_SIZEK=0x100000
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-#bx_b001- default K8_SB_HT_CHAIN_ON_BUS0=2
-
-##bx_b005+ make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#VGA
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcc000
-default CONFIG_DCACHE_RAM_SIZE=0x4000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="ms9282"
-default CONFIG_MAINBOARD_VENDOR="MSI"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x9282
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/nec/powermate2000/Config.lb b/src/mainboard/nec/powermate2000/Config.lb
deleted file mode 100644
index e63b1475dd..0000000000
--- a/src/mainboard/nec/powermate2000/Config.lb
+++ /dev/null
@@ -1,123 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82810 # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # CPU
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on
- device pci 0.0 on end # Host bridge
- device pci 1.0 off end # Onboard video
- chip southbridge/intel/i82801xx # Southbridge
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1e.0 on end # PCI bridge
- device pci 1f.0 on # ISA/LPC bridge
- chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47B27x)
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off end # Com2 (N/A)
- device pnp 2e.7 on # PS/2 keyboard
- irq 0x70 = 1
- irq 0x72 = 0
- end
- device pnp 2e.9 off end # Game port (N/A)
- device pnp 2e.a on # Power-management events (PME)
- io 0x60 = 0x800
- end
- device pnp 2e.b on # MIDI port
- io 0x60 = 0x330
- irq 0x70 = 5
- end
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.2 on end # USB
- device pci 1f.3 on end # SMBus
- device pci 1f.5 on end # AC'97 audio
- device pci 1f.6 off end # AC'97 modem (N/A)
- end
- end
-end
-
diff --git a/src/mainboard/nec/powermate2000/Options.lb b/src/mainboard/nec/powermate2000/Options.lb
deleted file mode 100644
index 735f30c7de..0000000000
--- a/src/mainboard/nec/powermate2000/Options.lb
+++ /dev/null
@@ -1,96 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 5 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb
deleted file mode 100644
index f053e669a9..0000000000
--- a/src/mainboard/newisys/khepri/Config.lb
+++ /dev/null
@@ -1,192 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT 0
- device pci 18.0 on # LDT 1
- chip southbridge/amd/amd8131
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 on end
- device pci 1.6 on end
- end
- end # LDT1
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb
deleted file mode 100644
index ad54dc6037..0000000000
--- a/src/mainboard/newisys/khepri/Options.lb
+++ /dev/null
@@ -1,243 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="Khepri"
-default CONFIG_MAINBOARD_VENDOR="Newisys"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x17c2
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x0010
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/nvidia/l1_2pvv/Config.lb b/src/mainboard/nvidia/l1_2pvv/Config.lb
deleted file mode 100644
index ba30037815..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/Config.lb
+++ /dev/null
@@ -1,373 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "/usr/sbin/iasl -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
- action "mv dsdt_lb.hex dsdt.c"
- end
- object ./dsdt.o
-
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-
- if CONFIG_ACPI_SSDTX_NUM
- makerule ssdt6.c
- depends "$(CONFIG_MAINBOARD)/dx/pci6.asl"
- action "/usr/sbin/iasl -tc $(CONFIG_MAINBOARD)/dx/pci6.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt6/g' pci6.hex"
- action "mv pci6.hex ssdt6.c"
- end
- object ./ssdt6.o
- makerule ssdt5.c
- depends "$(CONFIG_MAINBOARD)/dx/pci5.asl"
- action "/usr/sbin/iasl -tc $(CONFIG_MAINBOARD)/dx/pci5.asl"
- action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
- action "mv pci5.hex ssdt5.c"
- end
- object ./ssdt5.o
- end
-end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627ehg
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.0 on end # Link 1
- device pci 18.0 on
- # devices on link 2, link 2 == LDT 2
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on end # LPC
- device pci 1.1 on end # SM 0
- device pci 2.0 off end # USB 1.1
- device pci 2.1 off end # USB 2
- device pci 4.0 off end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 off end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb
deleted file mode 100644
index 00efb92b09..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/Options.lb
+++ /dev/null
@@ -1,353 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=1
-default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="l1_2pvv"
-default CONFIG_MAINBOARD_VENDOR="NVIDIA"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb
deleted file mode 100644
index 9edcbd066b..0000000000
--- a/src/mainboard/olpc/btest/Config.lb
+++ /dev/null
@@ -1,139 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx2
- register "irqmap" = "0xaa5b"
- register "setupflash" = "0"
- device apic_cluster 0 on
- chip cpu/amd/model_gx2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080.
- # Frame Pulse Width = 4clocks
- # IRQ Data Frames = 17Frames
- # SIRQ Mode = continous , It would be better if the EC could operate in
- # Active(Quiet) mode. Save power....
- # SIRQ Enable = Enabled
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- #register "lpc_irq" = "0x00001002"
- #register "lpc_serirq_enable" = "0xEFFD0080"
- #register "enable_gpio0_inta" = "1"
- #register "enable_ide_nand_flash" = "1"
- #register "enable_uarta" = "1"
- #register "enable_USBP4_host" = "1"
- #register "audio_irq" = "5"
- #register "usbf4_irq" = "10"
- #register "usbf5_irq" = "10"
- #register "usbf6_irq" = "0"
- #register "usbf7_irq" = "0"
- device pci d.0 on end # Realtek 8139 LAN
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC
- register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG
- register "unwanted_vpci[2]" = "0" # End of list has a zero
- end
- end
-end
-
diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb
deleted file mode 100644
index ab05e04e5c..0000000000
--- a/src/mainboard/olpc/btest/Options.lb
+++ /dev/null
@@ -1,160 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb
deleted file mode 100644
index 9edcbd066b..0000000000
--- a/src/mainboard/olpc/rev_a/Config.lb
+++ /dev/null
@@ -1,139 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx2
- register "irqmap" = "0xaa5b"
- register "setupflash" = "0"
- device apic_cluster 0 on
- chip cpu/amd/model_gx2
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080.
- # Frame Pulse Width = 4clocks
- # IRQ Data Frames = 17Frames
- # SIRQ Mode = continous , It would be better if the EC could operate in
- # Active(Quiet) mode. Save power....
- # SIRQ Enable = Enabled
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- #register "lpc_irq" = "0x00001002"
- #register "lpc_serirq_enable" = "0xEFFD0080"
- #register "enable_gpio0_inta" = "1"
- #register "enable_ide_nand_flash" = "1"
- #register "enable_uarta" = "1"
- #register "enable_USBP4_host" = "1"
- #register "audio_irq" = "5"
- #register "usbf4_irq" = "10"
- #register "usbf5_irq" = "10"
- #register "usbf6_irq" = "0"
- #register "usbf7_irq" = "0"
- device pci d.0 on end # Realtek 8139 LAN
- device pci f.0 on end # ISA Bridge
- device pci f.2 on end # IDE Controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC
- register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG
- register "unwanted_vpci[2]" = "0" # End of list has a zero
- end
- end
-end
-
diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb
deleted file mode 100644
index ab05e04e5c..0000000000
--- a/src/mainboard/olpc/rev_a/Options.lb
+++ /dev/null
@@ -1,160 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/pcengines/alix1c/Config.lb b/src/mainboard/pcengines/alix1c/Config.lb
deleted file mode 100644
index 38da7398b4..0000000000
--- a/src/mainboard/pcengines/alix1c/Config.lb
+++ /dev/null
@@ -1,190 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006-2007 Ronald G. Minnich <rminnich@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- # How to get these? Boot linux and do this:
- # rdmsr 0x51400025
- register "lpc_serirq_enable" = "0x0000105a"
- # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
- register "lpc_serirq_polarity" = "0x0000EFA5"
- # mode is high 10 bits (determined from code)
- register "lpc_serirq_mode" = "1"
- # Don't yet know how to find this.
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" #0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci f.0 on # ISA Bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 on end # GPIO2
- device pnp 2e.9 on end # GPIO3
- device pnp 2e.a on end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci f.1 on end # Flash controller
- device pci f.2 on end # IDE controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
-
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-
-end
-
diff --git a/src/mainboard/pcengines/alix1c/Options.lb b/src/mainboard/pcengines/alix1c/Options.lb
deleted file mode 100644
index 37fa14a317..0000000000
--- a/src/mainboard/pcengines/alix1c/Options.lb
+++ /dev/null
@@ -1,198 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2006-2007 Ronald G. Minnich <rminnich@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_VIDEO_MB
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_PIRQ_ROUTE
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 512*1024
-
-###
-### Build options
-###
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_VIDEO_MB=8
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=5
-default CONFIG_PIRQ_ROUTE=1
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
diff --git a/src/mainboard/rca/rm4100/Config.lb b/src/mainboard/rca/rm4100/Config.lb
deleted file mode 100644
index 648be3427f..0000000000
--- a/src/mainboard/rca/rm4100/Config.lb
+++ /dev/null
@@ -1,144 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82830 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 2.0 on end # VGA (Intel 82830 CGC)
- chip southbridge/intel/i82801xx # Southbridge
- register "pirqa_routing" = "0x05"
- register "pirqb_routing" = "0x06"
- register "pirqc_routing" = "0x07"
- register "pirqd_routing" = "0x09"
- register "pirqe_routing" = "0x0a"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x0b"
-
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1d.0 on end # USB UHCI Controller #1
- device pci 1d.1 on end # USB UHCI Controller #2
- device pci 1d.2 on end # USB UHCI Controller #3
- device pci 1d.7 on end # USB2 EHCI Controller
- device pci 1e.0 on # PCI bridge
- device pci 08.0 on end # Intel 82801DB PRO/100 VE Ethernet
- end
- device pci 1f.0 on # ISA/LPC bridge
- chip superio/smsc/smscsuperio # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 4
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 on # Com2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # PS/2 keyboard/mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.9 off end # Game port
- device pnp 2e.a on # PME
- io 0x60 = 0x800
- end
- device pnp 2e.b off end # MPU-401
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.3 on end # SMBus
- device pci 1f.5 on end # AC'97 audio
- device pci 1f.6 on end # AC'97 modem
- end
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # Mobile Celeron Micro-FCBGA Socket 479
- device apic 0 on end # APIC
- end
- end
-end
-
diff --git a/src/mainboard/rca/rm4100/Options.lb b/src/mainboard/rca/rm4100/Options.lb
deleted file mode 100644
index c9b28ce388..0000000000
--- a/src/mainboard/rca/rm4100/Options.lb
+++ /dev/null
@@ -1,96 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CC
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_IOAPIC
-uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_UDELAY_TSC
-uses CONFIG_VIDEO_MB
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_HEAP_SIZE
-uses HOSTCC
-uses CONFIG_IRQ_SLOT_COUNT
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_OBJCOPY
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_LCS
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_GENERATE_ACPI_TABLES = 0
-default CONFIG_IOAPIC = 0
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0
-default CONFIG_VIDEO_MB = 0
-default CONFIG_STACK_SIZE = 0x2000
-default CONFIG_HEAP_SIZE = 0x4000
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_ROM_PAYLOAD = 1
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAINBOARD_VENDOR = "RCA"
-default CONFIG_MAINBOARD_PART_NUMBER = "RM4100"
-end
diff --git a/src/mainboard/roda/rk886ex/Config.lb b/src/mainboard/roda/rk886ex/Config.lb
deleted file mode 100644
index 259eb31a3c..0000000000
--- a/src/mainboard/roda/rk886ex/Config.lb
+++ /dev/null
@@ -1,237 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-##
-## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
-##
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Image size calculation
-##
-
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-driver rtl8168.o
-object ec.o
-object m3885.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl"
- action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl"
- action "mv $(CURDIR)/dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- ldscript /cpu/x86/car/cache_as_ram.lds
-end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/intel/model_6ex/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i945
-
- device apic_cluster 0 on
- chip cpu/intel/socket_mFCPGA478
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- device pci 00.0 on end # host bridge
- # auto detection:
- #device pci 01.0 off end # i945 PCIe root port
- #device pci 02.0 on end # vga controller
- #device pci 02.1 on end # display controller
-
- chip southbridge/intel/i82801gx
- register "pirqa_routing" = "0x0b"
- register "pirqb_routing" = "0x0b"
- register "pirqc_routing" = "0x0b"
- register "pirqd_routing" = "0x0b"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x0b"
- register "pirqh_routing" = "0x0b"
-
- # GPI routing
- # 0 No effect (default)
- # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- # 2 SCI (if corresponding GPIO_EN bit is also set)
- register "gpi13_routing" = "2"
- register "gpi8_routing" = "1"
- register "gpi7_routing" = "2"
- register "gpe0_en" = "0x20800007"
-
- register "ide_legacy_combined" = "0x1"
- register "ide_enable_primary" = "0x1"
- register "ide_enable_secondary" = "0x0"
- register "sata_ahci" = "0x0"
-
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe
- device pci 1c.1 on end # PCIe
- device pci 1c.2 on end # PCIe
- #device pci 1c.3 off end # PCIe port 4
- #device pci 1c.4 off end # PCIe port 5
- #device pci 1c.5 off end # PCIe port 6
- device pci 1d.0 on end # USB UHCI
- device pci 1d.1 on end # USB UHCI
- device pci 1d.2 on end # USB UHCI
- device pci 1d.3 on end # USB UHCI
- device pci 1d.7 on end # USB2 EHCI
- device pci 1e.0 on
- chip southbridge/ti/pci7420
- register "smartcard_enabled" = "0x0"
- device pci 3.0 on end
- device pci 3.1 on end
- device pci 3.2 on end
- device pci 3.3 off end # smartcard
- end
- end # PCI bridge
- #device pci 1e.2 off end # AC'97 Audio
- #device pci 1e.3 off end # AC'97 Modem
- device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47n227
- device pnp 2e.1 off # Parallel port
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 off # Keyboard+Mouse
- # io 0x60 = 0x60
- # io 0x62 = 0x64
- # irq 0x70 = 1
- # irq 0x72 = 12
- end
- end
- chip superio/renesas/m3885x
- device pnp ff.1 on # dummy address
- end
- end
-
- end
- #device pci 1f.1 off end # IDE
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- #device pci 1f.4 off end # Realtek ID Codec
- end
- end
-end
diff --git a/src/mainboard/roda/rk886ex/Options.lb b/src/mainboard/roda/rk886ex/Options.lb
deleted file mode 100644
index 735223272c..0000000000
--- a/src/mainboard/roda/rk886ex/Options.lb
+++ /dev/null
@@ -1,339 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2008 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-# Tables
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-uses CONFIG_HAVE_ACPI_RESUME
-# SMP
-uses CONFIG_SMP
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_AP_IN_SIPI_WAIT
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-# Image Size
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-# Payload
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-# Build Internals
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_PCIE_CONFIGSPACE_HOLE
-uses CONFIG_MMCONF_SUPPORT
-uses CONFIG_MMCONF_BASE_ADDRESS
-uses CONFIG_GFXUMA
-#
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-# Timers
-uses CONFIG_UDELAY_LAPIC
-# Console
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_PCI_OPTION_ROM_RUN_YABEL
-uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE
-uses CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES
-uses CONFIG_DEBUG
-# Toolchain
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-# Tweaks
-uses CONFIG_GDB_STUB
-uses CONFIG_MAX_REBOOT_CNT
-uses CONFIG_USE_WATCHDOG_ON_BOOT
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-
-###
-### Build options
-###
-
-##
-##
-default CONFIG_MAX_REBOOT_CNT=3
-
-##
-## Use the watchdog to break out of a lockup condition
-##
-default CONFIG_USE_WATCHDOG_ON_BOOT=0
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-##
-default CONFIG_UDELAY_LAPIC=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=1
-
-##
-## Leave a hole for mmapped PCIe config space
-##
-
-default CONFIG_PCIE_CONFIGSPACE_HOLE=1
-default CONFIG_MMCONF_SUPPORT=1
-default CONFIG_MMCONF_BASE_ADDRESS=0xf0000000
-
-##
-## UMA
-##
-default CONFIG_GFXUMA=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=18
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-default CONFIG_HAVE_ACPI_RESUME=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default CONFIG_coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_PCI_ROM_RUN=0
-#default CONFIG_PCI_OPTION_ROM_RUN_REALMODE=1
-#default CONFIG_PCI_OPTION_ROM_RUN_YABEL=0
-# This is needed for Intel's IGD design:
-#default CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES=1
-#default CONFIG_DEBUG=0
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-default CONFIG_AP_IN_SIPI_WAIT=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_BASE=( 0xfff00000 - CONFIG_DCACHE_RAM_SIZE - 1024*1024)
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## Execute In Place settings
-##
-
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE - CONFIG_XIP_ROM_SIZE + CONFIG_ROM_IMAGE_SIZE )
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="RK886EX"
-default CONFIG_MAINBOARD_VENDOR= "RODA"
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x4352
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6886
-
-###
-### coreboot layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 32K stack
-##
-default CONFIG_STACK_SIZE=0x8000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=1
-
-##
-## USB debug console
-##
-
-default CONFIG_USBDEBUG_DIRECT=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb b/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb
deleted file mode 100644
index cdf4b58932..0000000000
--- a/src/mainboard/soyo/sy-6ba-plus-iii/Config.lb
+++ /dev/null
@@ -1,126 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/ite/it8671f # Super I/O
- device pnp 370.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 370.1 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 370.2 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 370.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 370.5 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 370.6 on # PS/2 mouse
- irq 0x70 = 12
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb b/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb
deleted file mode 100644
index 61b24fc566..0000000000
--- a/src/mainboard/soyo/sy-6ba-plus-iii/Options.lb
+++ /dev/null
@@ -1,96 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-end
diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb
deleted file mode 100644
index 2781be8d77..0000000000
--- a/src/mainboard/sunw/ultra40/Config.lb
+++ /dev/null
@@ -1,256 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2895
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on end # link 0
- device pci 18.0 on # link1
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/smsc/lpc47m10x
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 off # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master CK804 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave CK804 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # ACI
- device pci 4.1 off end # MCI
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on end # PCI
- device pci a.0 on end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
- device pci d.0 off end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.0 on end # link 2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- chip northbridge/amd/amdk8
- device pci 19.0 on end # link 0
- device pci 19.0 on
- # devices on link 1, link 1 == LDT 1
- chip southbridge/nvidia/ck804
- device pci 0.0 on end # HT
- device pci 1.0 on end # LPC
- device pci 1.1 off end # SM
- device pci 2.0 off end # USB 1.1
- device pci 2.1 off end # USB 2
- device pci 4.0 off end # ACI
- device pci 4.1 off end # MCI
- device pci 6.0 off end # IDE
- device pci 7.0 off end # SATA 1
- device pci 8.0 off end # SATA 0
- device pci 9.0 off end # PCI
- device pci a.0 on end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
- device pci d.0 off end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "mac_eeprom_smbus" = "3"
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 19.0
-
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end # PCI domain
-
-end #root_complex
diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb
deleted file mode 100644
index e820fd03f8..0000000000
--- a/src/mainboard/sunw/ultra40/Options.lb
+++ /dev/null
@@ -1,280 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-#default CONFIG_ROM_SIZE=524288
-
-#1M bytes
-default CONFIG_ROM_SIZE=1048576
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#VGA
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="ultra40"
-default CONFIG_MAINBOARD_VENDOR="sunw"
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x108e
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x40
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb
deleted file mode 100644
index 18cde515db..0000000000
--- a/src/mainboard/supermicro/h8dme/Config.lb
+++ /dev/null
@@ -1,301 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/i2c/i2cmux2
- device i2c 48 off end
- device i2c 49 off end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on # PCI
- device pci 6.0 on end
- end
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on # PCI E 5
- device pci 0.0 on #nec pci-x
- end
- device pci 0.1 on #nec pci-x
- device pci 4.0 on end #scsi
- device pci 4.1 on end #scsi
- end
- end
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 on end # io
-# end
-end #root_complex
diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb
deleted file mode 100644
index 85d8331701..0000000000
--- a/src/mainboard/supermicro/h8dme/Options.lb
+++ /dev/null
@@ -1,355 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-#default CONFIG_ROM_SIZE=524288
-default CONFIG_ROM_SIZE=0x100000
-
-default CONFIG_HAVE_LOW_TABLES = 0
-default CONFIG_MULTIBOOT=0
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=1
-default CONFIG_MEM_TRAIN_SEQ=1
-default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="h8dme"
-default CONFIG_MAINBOARD_VENDOR="Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb
deleted file mode 100644
index 13db09a54d..0000000000
--- a/src/mainboard/supermicro/h8dmr/Config.lb
+++ /dev/null
@@ -1,323 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on # PCI
- device pci 6.0 on end
- end
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on # PCI E 5
- device pci 0.0 on #nec pci-x
- end
- device pci 0.1 on #nec pci-x
- device pci 4.0 on end #scsi
- device pci 4.1 on end #scsi
- end
- end
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 on end # io
-# end
-end #root_complex
diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb
deleted file mode 100644
index f0e9082663..0000000000
--- a/src/mainboard/supermicro/h8dmr/Options.lb
+++ /dev/null
@@ -1,353 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-#default CONFIG_ROM_SIZE=524288
-default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use
-##
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=1
-default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="h8dmr"
-default CONFIG_MAINBOARD_VENDOR="Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 0xf000
-
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_USE_FAILOVER_IMAGE=0
-default CONFIG_USE_FALLBACK_IMAGE=0
-default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/h8dmr_fam10/Config.lb b/src/mainboard/supermicro/h8dmr_fam10/Config.lb
deleted file mode 100644
index fe2d1b6ff8..0000000000
--- a/src/mainboard/supermicro/h8dmr_fam10/Config.lb
+++ /dev/null
@@ -1,333 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-# for testing with -O != s. FIXME
-#default CONFIG_XIP_ROM_SIZE = 128 * 1024
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-dir /southbridge/nvidia/mcp55
-
-chip northbridge/amd/amdfam10/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F_1207
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdfam10 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # SB on link 2.0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on # PCI
- device pci 6.0 on end
- end
- device pci 6.1 on end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on # PCI E 5
- device pci 0.0 on #nec pci-x
- end
- device pci 0.1 on #nec pci-x
- device pci 4.0 on end #scsi
- device pci 4.1 on end #scsi
- end
- end
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- device pci 19.4 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 on end # io
-# end
-end #root_complex
diff --git a/src/mainboard/supermicro/h8dmr_fam10/Options.lb b/src/mainboard/supermicro/h8dmr_fam10/Options.lb
deleted file mode 100644
index a7d3ca8095..0000000000
--- a/src/mainboard/supermicro/h8dmr_fam10/Options.lb
+++ /dev/null
@@ -1,363 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_UNCOMPRESSED
-
-uses CONFIG_PCI_BUS_SEGN_BITS
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_AMDMCT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_AMD_UCODE_PATCH_FILE
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE=0x02000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=16384*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x00
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=1
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc4000
-default CONFIG_DCACHE_RAM_SIZE=0x0c000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
-default CONFIG_USE_INIT=0
-
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-default CONFIG_AMDMCT = 1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="h8dmr (Fam10)"
-default CONFIG_MAINBOARD_VENDOR="Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511
-
-##
-## Set microcode patch file name
-##
-## Barcelona rev Ax: "mc_patch_01000020.h"
-## Barcelona rev B0, B1, BA: "mc_patch_01000084.h"
-## Barcelona rev B2, B3: "mc_patch_01000083.h"
-## Shanghai rev RB-C2: "mc_patch_01000086.h"
-## Shanghai rev DA-C2: "mc_patch_0100009f.h"
-##
-#default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000086.h"
-default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_0100009f.h"
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 0x1e000
-
-##
-## Use a 32K stack
-##
-default CONFIG_STACK_SIZE=0x8000
-
-##
-## Use a 48K heap
-##
-default CONFIG_HEAP_SIZE=0xc0000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00200000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-# CBFS will take care of payload compression
-default CONFIG_UNCOMPRESSED = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_USE_FAILOVER_IMAGE=0
-default CONFIG_USE_FALLBACK_IMAGE=0
-default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/h8qme_fam10/Config.lb b/src/mainboard/supermicro/h8qme_fam10/Config.lb
deleted file mode 100644
index 863575b210..0000000000
--- a/src/mainboard/supermicro/h8qme_fam10/Config.lb
+++ /dev/null
@@ -1,347 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-# for testing with -O != s. FIXME
-#default CONFIG_XIP_ROM_SIZE = 128 * 1024
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-dir /southbridge/nvidia/mcp55
-dir /southbridge/amd/amd8132
-
-chip northbridge/amd/amdfam10/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F_1207
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdfam10 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # SB on link 2.0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- # chip drivers/generic/generic #dimm 0-0-0
- # device i2c 50 on end
- # end
- # chip drivers/generic/generic #dimm 0-0-1
- # device i2c 51 on end
- # end
- # chip drivers/generic/generic #dimm 0-1-0
- # device i2c 52 on end
- # end
- # chip drivers/generic/generic #dimm 0-1-1
- # device i2c 53 on end
- # end
- # chip drivers/generic/generic #dimm 1-0-0
- # device i2c 54 on end
- # end
- # chip drivers/generic/generic #dimm 1-0-1
- # device i2c 55 on end
- # end
- # chip drivers/generic/generic #dimm 1-1-0
- # device i2c 56 on end
- # end
- # chip drivers/generic/generic #dimm 1-1-1
- # device i2c 57 on end
- # end
- # chip drivers/generic/generic #dimm 2-0-0
- # device i2c 58 on end
- # end
- # chip drivers/generic/generic #dimm 2-0-1
- # device i2c 59 on end
- # end
- # chip drivers/generic/generic #dimm 2-1-0
- # device i2c 5a on end
- # end
- # chip drivers/generic/generic #dimm 2-1-1
- # device i2c 5b on end
- # end
- # chip drivers/generic/generic #dimm 3-0-0
- # device i2c 5c on end
- # end
- # chip drivers/generic/generic #dimm 3-0-1
- # device i2c 5d on end
- # end
- # chip drivers/generic/generic #dimm 3-1-0
- # device i2c 5e on end
- # end
- # chip drivers/generic/generic #dimm 3-1-1
- # device i2c 5f on end
- # end
-
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will diepend on addon pci device, do we need to scan_smbus_bus?
-#
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.1 off end # AZA
- device pci 7.0 on
- device pci 1.0 on end
- end
- device pci 8.0 off end
- device pci 9.0 off end
- device pci a.0 on end # PCI E 5
- device pci b.0 on end # PCI E 4
- device pci c.0 on end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 on end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on
- chip southbridge/amd/amd8132
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on
- device pci 3.0 on end
- device pci 3.1 on end
- end
- device pci 1.1 on end
- end #amd8132
- end #device pci 19.0
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- device pci 19.4 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 on end # io
-# end
-end #root_complex
diff --git a/src/mainboard/supermicro/h8qme_fam10/Options.lb b/src/mainboard/supermicro/h8qme_fam10/Options.lb
deleted file mode 100644
index 279d8ac96e..0000000000
--- a/src/mainboard/supermicro/h8qme_fam10/Options.lb
+++ /dev/null
@@ -1,373 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_VGA
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_UNCOMPRESSED
-
-uses CONFIG_PCI_BUS_SEGN_BITS
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_AMDMCT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_AMD_UCODE_PATCH_FILE
-uses CONFIG_ID_SECTION_OFFSET
-
-uses CONFIG_PIRQ_ROUTE
-
-default CONFIG_PIRQ_ROUTE = 1
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use
-default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE=0x02000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=16384*1024
-#default CONFIG_RAMTOP=16384*8192
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_PHYSICAL_CPUS=4
-default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=1
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x00
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#VGA Console
-default CONFIG_VGA=0
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_VGA_ROM_RUN=1
-default CONFIG_PCI_ROM_RUN=0
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=1
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc4000
-default CONFIG_DCACHE_RAM_SIZE=0x0c000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
-default CONFIG_USE_INIT=0
-
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-default CONFIG_AMDMCT = 1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="h8qme (Fam10)"
-default CONFIG_MAINBOARD_VENDOR="Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511
-
-##
-## Set microcode patch file name
-##
-## Barcelona rev Ax: "mc_patch_01000020.h"
-## Barcelona rev B0, B1, BA: "mc_patch_01000084.h"
-## Barcelona rev B2, B3: "mc_patch_01000083.h"
-## Shanghai rev RB-C2: "mc_patch_01000086.h"
-## Shanghai rev DA-C2: "mc_patch_0100009f.h"
-##
-#default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000086.h"
-default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_0100009f.h"
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 0x1e000
-
-##
-## Use a 64K stack
-##
-default CONFIG_STACK_SIZE=0x10000
-
-##
-## Use a 48K heap
-##
-default CONFIG_HEAP_SIZE=0xc000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00200000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-# CBFS will take care of payload compression
-default CONFIG_UNCOMPRESSED = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-#default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_USE_FAILOVER_IMAGE=0
-default CONFIG_USE_FALLBACK_IMAGE=0
-default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb
deleted file mode 100644
index 17096f5da4..0000000000
--- a/src/mainboard/supermicro/x6dai_g/Config.lb
+++ /dev/null
@@ -1,167 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7525 # mch
- device pci_domain 0 on
- chip southbridge/intel/esb6300 # esb6300
- register "pirq_a_d" = "0x0b0a0a05"
- register "pirq_e_h" = "0x0a0b0c80"
-
- device pci 1c.0 on end
-
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.4 on end
- device pci 1d.5 on end
- device pci 1d.7 on end
-
- device pci 1e.0 on end
-
- device pci 1f.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off end
- device pnp 2e.1 off end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 off end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a on end
- device pnp 2e.b off end
- device pnp 2e.f off end
- device pnp 2e.10 off end
- device pnp 2e.14 off end
- end
- end
- device pci 1f.1 on end
- device pci 1f.2 on end
- device pci 1f.3 on end
- device pci 1f.5 off end
- device pci 1f.6 on end
- end
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 00.2 on end
- device pci 02.0 on end
- device pci 03.0 on end
- device pci 04.0 on end
- device pci 08.0 on end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # cpu0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # cpu1
- device apic 6 on end
- end
- end
-end
-
diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb
deleted file mode 100644
index 626f0bebb3..0000000000
--- a/src/mainboard/supermicro/x6dai_g/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DAI"
-default CONFIG_MAINBOARD_VENDOR= "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6780
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb
deleted file mode 100644
index 866042b548..0000000000
--- a/src/mainboard/supermicro/x6dhe_g/Config.lb
+++ /dev/null
@@ -1,190 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520 # MCH
- chip drivers/generic/debug # DEBUGGING
- device pnp 00.0 on end
- device pnp 00.1 off end
- device pnp 00.2 off end
- device pnp 00.3 off end
- end
- device pci_domain 0 on
- chip southbridge/intel/esb6300 # ESB6300
- register "pirq_a_d" = "0x0b070a05"
- register "pirq_e_h" = "0x0a808080"
-
- device pci 1c.0 on
- chip drivers/generic/generic
- device pci 01.0 on end # onboard gige1
- device pci 02.0 on end # onboard gige2
- end
- end
-
- # USB ports
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.4 on end # Southbridge Watchdog timer
- device pci 1d.5 on end # Southbridge I/O apic1
- device pci 1d.7 on end
-
- # VGA / PCI 32-bit
- device pci 1e.0 on
- chip drivers/generic/generic
- device pci 01.0 on end
- end
- end
-
-
- device pci 1f.0 on # ISA bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 off end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a on end
- device pnp 2e.b off end
- end
- end
- device pci 1f.1 on end
- device pci 1f.2 off end
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end
- device pci 1f.6 off end
- end
-
- device pci 00.0 on end # Northbridge
- device pci 00.1 on end # Northbridge Error reporting
- device pci 01.0 on end
- device pci 02.0 on
- chip southbridge/intel/pxhd # PXHD 6700
- device pci 00.0 on end # bridge
- device pci 00.1 on end # I/O apic
- device pci 00.2 on end # bridge
- device pci 00.3 on end # I/O apic
- end
- end
-# device register "intrline" = "0x00070105"
- device pci 04.0 on end
- device pci 06.0 on end
- end
-
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # CPU 0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # CPU 1
- device apic 6 on end
- end
- end
-end
diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb
deleted file mode 100644
index 87be848afb..0000000000
--- a/src/mainboard/supermicro/x6dhe_g/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DHE_g"
-default CONFIG_MAINBOARD_VENDOR= "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb
deleted file mode 100644
index 11569d9a5b..0000000000
--- a/src/mainboard/supermicro/x6dhe_g2/Config.lb
+++ /dev/null
@@ -1,190 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520 # MCH
- chip drivers/generic/debug # DEBUGGING
- device pnp 00.0 off end
- device pnp 00.1 off end
- device pnp 00.2 off end
- device pnp 00.3 off end
- end
- device pci_domain 0 on
- chip southbridge/intel/i82801er # ICH5R
- register "pirq_a_d" = "0x0b070a05"
- register "pirq_e_h" = "0x0a808080"
-
- device pci 1c.0 on
- chip drivers/generic/generic
- device pci 01.0 on end # onboard gige1
- device pci 02.0 on end # onboard gige2
- end
- end
-
- # USB ports
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.4 on end # Southbridge Watchdog timer
- device pci 1d.5 on end # Southbridge I/O apic1
- device pci 1d.7 on end
-
- # VGA / PCI 32-bit
- device pci 1e.0 on
- chip drivers/generic/generic
- device pci 01.0 on end
- end
- end
-
-
- device pci 1f.0 on # ISA bridge
- chip superio/nsc/pc87427
- device pnp 2e.0 off end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 off end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a on end
- device pnp 2e.b off end
- end
- end
- device pci 1f.1 on end
- device pci 1f.2 on end
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end
- device pci 1f.6 off end
- end
-
- device pci 00.0 on end # Northbridge
- device pci 00.1 on end # Northbridge Error reporting
- device pci 01.0 on end
- device pci 02.0 on
- chip southbridge/intel/pxhd # PXHD 6700
- device pci 00.0 on end # bridge
- device pci 00.1 on end # I/O apic
- device pci 00.2 on end # bridge
- device pci 00.3 on end # I/O apic
- end
- end
-# device register "intrline" = "0x00070105"
- device pci 04.0 on end
- device pci 06.0 on end
- end
-
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # CPU 0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # CPU 1
- device apic 6 on end
- end
- end
-end
diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb
deleted file mode 100644
index 87be848afb..0000000000
--- a/src/mainboard/supermicro/x6dhe_g2/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DHE_g"
-default CONFIG_MAINBOARD_VENDOR= "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb
deleted file mode 100644
index dc2dd1265f..0000000000
--- a/src/mainboard/supermicro/x6dhr_ig/Config.lb
+++ /dev/null
@@ -1,187 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520 # mch
- device pci_domain 0 on
- chip southbridge/intel/i82801er # i82801er
- # USB ports
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 on end
- device pci 1d.7 on end
-
- # -> VGA
- device pci 1e.0 on end
-
- # -> IDE
- device pci 1f.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 off end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a on end
- device pnp 2e.b off end
- end
- end
- device pci 1f.1 on end
- device pci 1f.2 on end
- device pci 1f.3 on end
-
- register "pirq_a_d" = "0x0b070a05"
- register "pirq_e_h" = "0x0a808080"
- end
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 01.0 on end
- device pci 02.0 on end
- device pci 03.0 on
- chip southbridge/intel/pxhd # pxhd1
- # Bus bridges and ioapics usually bus 2
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on
- # On board gig e1000
- chip drivers/generic/generic
- device pci 02.0 on end
- device pci 02.1 on end
- end
- end
- device pci 0.3 on end
- end
- end
- device pci 04.0 on
- chip southbridge/intel/pxhd # pxhd2
- # Bus bridges and ioapics usually bus 5
- device pci 0.0 on end
- # Slot 6 is usually 6:2.0
- device pci 0.1 on end
- device pci 0.2 on end
- # Slot 7 is usually 7:2.0
- device pci 0.3 on end
- end
- end
- device pci 06.0 on end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # cpu 0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # cpu 1
- device apic 6 on end
- end
- end
- register "intrline" = "0x00070105"
-end
-
diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb
deleted file mode 100644
index d8b836bfc4..0000000000
--- a/src/mainboard/supermicro/x6dhr_ig/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DHR"
-default CONFIG_MAINBOARD_VENDOR= "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb
deleted file mode 100644
index 9e8ce1427a..0000000000
--- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb
+++ /dev/null
@@ -1,178 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -fno-simplify-phi -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -fno-simplify-phi -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -fno-simplify-phi -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -fno-simplify-phi -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520 # mch
- device pci_domain 0 on
- chip southbridge/intel/i82801er # i82801er
- # USB ports
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 on end
- device pci 1d.7 on end
-
- # -> Bridge
- device pci 1e.0 on end
-
- # -> ISA
- device pci 1f.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 off end
- device pnp 2e.2 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 off end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a on end
- device pnp 2e.b off end
- end
- end
- # -> IDE
- device pci 1f.1 on end
- # -> SATA
- device pci 1f.2 on end
- device pci 1f.3 on end
-
- register "pirq_a_d" = "0x0b070a05"
- register "pirq_e_h" = "0x0a808080"
- end
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 01.0 on end
- device pci 02.0 on
- chip southbridge/intel/pxhd # pxhd1
- # Bus bridges and ioapics usually bus 1
- device pci 0.0 on
- # On board gig e1000
- chip drivers/generic/generic
- device pci 03.0 on end
- device pci 03.1 on end
- end
- end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 0.3 on end
- end
- end
- device pci 04.0 on end
- device pci 06.0 on end
- end
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604 # cpu 0
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # cpu 1
- device apic 6 on end
- end
- end
- register "intrline" = "0x00070105"
-end
-
diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb
deleted file mode 100644
index d8b836bfc4..0000000000
--- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DHR"
-default CONFIG_MAINBOARD_VENDOR= "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end
diff --git a/src/mainboard/technexion/tim5690/Config.lb b/src/mainboard/technexion/tim5690/Config.lb
deleted file mode 100644
index 619e76e074..0000000000
--- a/src/mainboard/technexion/tim5690/Config.lb
+++ /dev/null
@@ -1,261 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-object vgabios.o
-object tn_post_code.o
-object speaker.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE
- object get_bus_conf.o
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
- if CONFIG_USE_INIT
-
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-#The variables belong to mainboard are defined here.
-
-#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
-#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
-#Define gfx_dual_slot, 0: single slot, 1: dual slot
-#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
-#Define gfx_tmds, 0: didn't support TMDS, 1: support
-#Define gfx_compliance, 0: didn't support compliance, 1: support
-#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
-#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_S1G1
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # southbridge
- chip southbridge/amd/rs690
- device pci 0.0 on end # HT 0x7910
- device pci 1.0 on # Internal Graphics P2P bridge 0x7912
- device pci 5.0 on end # Internal Graphics 0x791F
- end
- device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
- device pci 3.0 off end # PCIE P2P bridge 0x791b
- device pci 4.0 on end # PCIE P2P bridge 0x7914
- device pci 5.0 on end # PCIE P2P bridge 0x7915
- device pci 6.0 on end # PCIE P2P bridge 0x7916
- device pci 7.0 on end # PCIE P2P bridge 0x7917
- device pci 8.0 off end # NB/SB Link P2P bridge
- register "gpp_configuration" = "4"
- register "port_enable" = "0xfc"
- register "gfx_dev2_dev3" = "1"
- register "gfx_dual_slot" = "0"
- register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "1"
- register "gfx_compliance" = "0"
- register "gfx_reconfiguration" = "0"
- register "gfx_link_width" = "0"
- end
- chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
- device pci 12.0 on end # SATA 0x4380
- device pci 13.0 on end # USB 0x4387
- device pci 13.1 on end # USB 0x4388
- device pci 13.2 on end # USB 0x4389
- device pci 13.3 on end # USB 0x438a
- device pci 13.4 on end # USB 0x438b
- device pci 13.5 on end # USB 2 0x4386
- device pci 14.0 on # SM 0x4385
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x438c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x438d
- chip superio/ite/it8712f
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 off end # EC
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end #superio/ite/it8712f
- end #LPC
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # ACI 0x4382
- device pci 14.6 on end # MCI 0x438e
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "hda_viddid" = "0x10ec0882"
- end #southbridge/amd/sb600
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end #northbridge/amd/amdk8
- end #pci_domain
-end #northbridge/amd/amdk8/root_complex
-
diff --git a/src/mainboard/technexion/tim5690/Options.lb b/src/mainboard/technexion/tim5690/Options.lb
deleted file mode 100644
index 774baafb4f..0000000000
--- a/src/mainboard/technexion/tim5690/Options.lb
+++ /dev/null
@@ -1,303 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_VIDEO_MB
-uses CONFIG_GFXUMA
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-uses CONFIG_VGA_ROM_RUN
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_PCI_OPTION_ROM_RUN_REALMODE=1
-default CONFIG_VGA_ROM_RUN=1
-
-# BTDC: Only one HT device on Herring.
-#HT Unit ID offset
-#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-
-#real SB Unit ID
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
-
-#make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="tim5690"
-default CONFIG_MAINBOARD_VENDOR="technexion"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_VIDEO_MB=1
-default CONFIG_GFXUMA=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-
-### End Options.lb
-end
diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb
deleted file mode 100644
index fde48a1cc2..0000000000
--- a/src/mainboard/technexion/tim8690/Config.lb
+++ /dev/null
@@ -1,258 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE
- object get_bus_conf.o
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- object fadt.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
- if CONFIG_USE_INIT
-
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-#The variables belong to mainboard are defined here.
-
-#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
-#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
-#Define gfx_dual_slot, 0: single slot, 1: dual slot
-#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
-#Define gfx_tmds, 0: didn't support TMDS, 1: support
-#Define gfx_compliance, 0: didn't support compliance, 1: support
-#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
-#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_S1G1
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # southbridge
- chip southbridge/amd/rs690
- device pci 0.0 on end # HT 0x7910
- device pci 1.0 on # Internal Graphics P2P bridge 0x7912
- device pci 5.0 on end # Internal Graphics 0x791F
- end
- device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
- device pci 3.0 off end # PCIE P2P bridge 0x791b
- device pci 4.0 on end # PCIE P2P bridge 0x7914
- device pci 5.0 on end # PCIE P2P bridge 0x7915
- device pci 6.0 on end # PCIE P2P bridge 0x7916
- device pci 7.0 on end # PCIE P2P bridge 0x7917
- device pci 8.0 off end # NB/SB Link P2P bridge
- register "gpp_configuration" = "4"
- register "port_enable" = "0xfc"
- register "gfx_dev2_dev3" = "1"
- register "gfx_dual_slot" = "0"
- register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "0"
- register "gfx_compliance" = "0"
- register "gfx_reconfiguration" = "1"
- register "gfx_link_width" = "0"
- end
- chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
- device pci 12.0 on end # SATA 0x4380
- device pci 13.0 on end # USB 0x4387
- device pci 13.1 on end # USB 0x4388
- device pci 13.2 on end # USB 0x4389
- device pci 13.3 on end # USB 0x438a
- device pci 13.4 on end # USB 0x438b
- device pci 13.5 on end # USB 2 0x4386
- device pci 14.0 on # SM 0x4385
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x438c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x438d
- chip superio/ite/it8712f
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 off end # EC
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 on # Mouse
- irq 0x70 = 12
- end
- device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
- end
- device pnp 2e.8 off # MIDI
- io 0x60 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.9 off # GAME
- io 0x60 = 0x220
- end
- device pnp 2e.a off end # CIR
- end #superio/ite/it8712f
- end #LPC
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # ACI 0x4382
- device pci 14.6 on end # MCI 0x438e
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "hda_viddid" = "0x10ec0882"
- end #southbridge/amd/sb600
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end #northbridge/amd/amdk8
- end #pci_domain
-end #northbridge/amd/amdk8/root_complex
-
diff --git a/src/mainboard/technexion/tim8690/Options.lb b/src/mainboard/technexion/tim8690/Options.lb
deleted file mode 100644
index 9589fcd97b..0000000000
--- a/src/mainboard/technexion/tim8690/Options.lb
+++ /dev/null
@@ -1,300 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Advanced Micro Devices, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-##
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_VIDEO_MB
-uses CONFIG_GFXUMA
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=0
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-# BTDC: Only one HT device on Herring.
-#HT Unit ID offset
-#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-
-#real SB Unit ID
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
-
-#make the SB HT chain on bus 0
-default CONFIG_SB_HT_CHAIN_ON_BUS0=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="tim8690"
-default CONFIG_MAINBOARD_VENDOR="technexion"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
-
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-##
-## coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_VIDEO_MB=1
-default CONFIG_GFXUMA=1
-default CONFIG_HAVE_MAINBOARD_RESOURCES=1
-
-### End Options.lb
-end
diff --git a/src/mainboard/technologic/ts5300/Config.lb b/src/mainboard/technologic/ts5300/Config.lb
deleted file mode 100644
index fdc26ea8df..0000000000
--- a/src/mainboard/technologic/ts5300/Config.lb
+++ /dev/null
@@ -1,111 +0,0 @@
-default CONFIG_ROM_SIZE = 128 * 1024
-default CONFIG_FALLBACK_SIZE = 0x10000
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 32 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-
-# VGA console
-#if CONFIG_CONSOLE_VGA
-# default CONFIG_PCI_ROM_RUN=1
-#end
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-dir /devices
-config chip.h
-
-chip cpu/amd/sc520
- device pci_domain 0 on
- device pci 0.0 on end
-
-# register "com1" = "{1}"
-# register "com1" = "{1, 0, 0x3f8, 4}"
- end
-
-end
diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb
deleted file mode 100644
index 1028c980a0..0000000000
--- a/src/mainboard/technologic/ts5300/Options.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_COMPRESS
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_USE_INIT
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-
-
-uses CONFIG_CONSOLE_SERIAL8250
-
-
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-
-default CONFIG_CONSOLE_SERIAL8250=1
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x2f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-end
diff --git a/src/mainboard/televideo/tc7020/Config.lb b/src/mainboard/televideo/tc7020/Config.lb
deleted file mode 100644
index ff76635ce8..0000000000
--- a/src/mainboard/televideo/tc7020/Config.lb
+++ /dev/null
@@ -1,130 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Kenji Noguchi <tokoy246@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/amd/model_gx1/cpu_setup.inc
-mainboardinit cpu/amd/model_gx1/gx_setup.inc
-mainboardinit ./auto.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx1 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- chip southbridge/amd/cs5530 # Southbridge
- device pci 12.0 on # ISA bridge
- chip superio/nsc/pc97317 # Super I/O
- device pnp 2e.0 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.1 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.2 on # RTC, Advanced power control (APC)
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 2e.3 off # Floppy (N/A on this board)
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.4 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.5 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0xe0
- end
- device pnp 2e.8 on # Power management
- io 0x60 = 0xe8
- end
- end
- end
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA (onboard)
- device pci 13.0 on end # USB
- device pci 14.0 on end # MiniPCI slot
- device pci 15.0 on end # Ethernet (onboard)
- register "ide0_enable" = "1"
- register "ide1_enable" = "0" # Not available/needed on this board
- end
- end
- chip cpu/amd/model_gx1 # CPU
- end
-end
diff --git a/src/mainboard/televideo/tc7020/Options.lb b/src/mainboard/televideo/tc7020/Options.lb
deleted file mode 100644
index 9b0cfb833c..0000000000
--- a/src/mainboard/televideo/tc7020/Options.lb
+++ /dev/null
@@ -1,102 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Kenji Noguchi <tokyo246@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_VIDEO_MB
-uses CONFIG_SPLASH_GRAPHIC
-uses CONFIG_GX1_VIDEO
-uses CONFIG_GX1_VIDEOMODE
-uses CONFIG_PIRQ_ROUTE
-
-## Enable VGA with a splash screen (only 640x480 to run on most monitors).
-## We want to support up to 1024x768@16 so we need 2MiB video memory.
-## Note: Higher resolutions might need faster SDRAM speed.
-default CONFIG_GX1_VIDEO = 1
-default CONFIG_GX1_VIDEOMODE = 0
-default CONFIG_SPLASH_GRAPHIC = 1
-default CONFIG_VIDEO_MB = 2
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_MAINBOARD_VENDOR = "TeleVideo"
-default CONFIG_MAINBOARD_PART_NUMBER = "TC7020"
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_PIRQ_ROUTE=1
-default CONFIG_IRQ_SLOT_COUNT = 3 # Soldered NIC, internal USB, mini PCI slot
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc "
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
-end
diff --git a/src/mainboard/thomson/ip1000/Config.lb b/src/mainboard/thomson/ip1000/Config.lb
deleted file mode 100644
index a509341c07..0000000000
--- a/src/mainboard/thomson/ip1000/Config.lb
+++ /dev/null
@@ -1,144 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82830 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 2.0 on end # VGA (Intel 82830 CGC)
- chip southbridge/intel/i82801xx # Southbridge
- register "pirqa_routing" = "0x05"
- register "pirqb_routing" = "0x06"
- register "pirqc_routing" = "0x07"
- register "pirqd_routing" = "0x09"
- register "pirqe_routing" = "0x0a"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x0b"
-
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
-
- device pci 1d.0 on end # USB UHCI Controller #1
- device pci 1d.1 on end # USB UHCI Controller #2
- device pci 1d.2 on end # USB UHCI Controller #3
- device pci 1d.7 on end # USB2 EHCI Controller
- device pci 1e.0 on # PCI bridge
- device pci 08.0 on end # Intel 82801DB PRO/100 VE Ethernet
- end
- device pci 1f.0 on # ISA/LPC bridge
- chip superio/smsc/smscsuperio # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 4
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 on # Com2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # PS/2 keyboard/mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.9 off end # Game port
- device pnp 2e.a on # PME
- io 0x60 = 0x800
- end
- device pnp 2e.b off end # MPU-401
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.3 on end # SMBus
- device pci 1f.5 on end # AC'97 audio
- device pci 1f.6 off end # AC'97 modem
- end
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/socket_PGA370 # Low Voltage PIII Micro-FCBGA Socket 479
- device apic 0 on end # APIC
- end
- end
-end
-
diff --git a/src/mainboard/thomson/ip1000/Options.lb b/src/mainboard/thomson/ip1000/Options.lb
deleted file mode 100644
index 655d94fae7..0000000000
--- a/src/mainboard/thomson/ip1000/Options.lb
+++ /dev/null
@@ -1,96 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CC
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_IOAPIC
-uses CONFIG_PCI_OPTION_ROM_RUN_REALMODE
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_UDELAY_TSC
-uses CONFIG_VIDEO_MB
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_HEAP_SIZE
-uses HOSTCC
-uses CONFIG_IRQ_SLOT_COUNT
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_OBJCOPY
-uses CONFIG_RAMBASE
-uses CONFIG_ROMBASE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_LCS
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_GENERATE_ACPI_TABLES = 0
-default CONFIG_IOAPIC = 0
-default CONFIG_HAVE_OPTION_TABLE = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0
-default CONFIG_VIDEO_MB = 0
-default CONFIG_STACK_SIZE = 0x2000
-default CONFIG_HEAP_SIZE = 0x4000
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_ROM_PAYLOAD = 1
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAINBOARD_VENDOR = "THOMSON"
-default CONFIG_MAINBOARD_PART_NUMBER = "IP1000"
-end
diff --git a/src/mainboard/tyan/s1846/Config.lb b/src/mainboard/tyan/s1846/Config.lb
deleted file mode 100644
index 31e0fb8056..0000000000
--- a/src/mainboard/tyan/s1846/Config.lb
+++ /dev/null
@@ -1,128 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
- action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx # Northbridge
- device apic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
- device apic 0 on end # APIC
- end
- end
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # Host bridge
- device pci 1.0 on end # PCI/AGP bridge
- chip southbridge/intel/i82371eb # Southbridge
- device pci 7.0 on # ISA bridge
- chip superio/nsc/pc87309 # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # COM2 / IR
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 on # Power management
- end
- device pnp 2e.5 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.6 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- end
- end
- device pci 7.1 on end # IDE
- device pci 7.2 on end # USB
- device pci 7.3 on end # ACPI
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "ide_legacy_enable" = "1"
- # Enable UDMA/33 for higher speed if your IDE device(s) support it.
- register "ide0_drive0_udma33_enable" = "0"
- register "ide0_drive1_udma33_enable" = "0"
- register "ide1_drive0_udma33_enable" = "0"
- register "ide1_drive1_udma33_enable" = "0"
- end
- end
-end
diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb
deleted file mode 100644
index 975a085b1a..0000000000
--- a/src/mainboard/tyan/s1846/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3 # 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-end
diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb
deleted file mode 100644
index 4f9fc5b20b..0000000000
--- a/src/mainboard/tyan/s2735/Config.lb
+++ /dev/null
@@ -1,179 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/car/cache_as_ram.lds
- end
-
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/x86/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2735
-chip northbridge/intel/e7501
- device pci_domain 0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 2.0 on
- chip southbridge/intel/i82870
- device pci 1c.0 on end
- device pci 1d.0 on
- device pci 1.0 on end # intel lan
- device pci 1.1 on end
- end
- device pci 1e.0 on end
- device pci 1f.0 on end
- end
- end
- device pci 6.0 on end
- chip southbridge/intel/i82801er
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 on end
- device pci 1d.7 on end
- device pci 1e.0 on
- device pci 1.0 on end # intel lan 10/100
- device pci 2.0 on end # ati
- end
- device pci 1f.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1f.1 off end
- device pci 1f.2 on end
- device pci 1f.3 on end
- device pci 1f.5 off end
- device pci 1f.6 off end
- end # SB
- end # PCI_DOMAIN
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604
- device apic 6 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb
deleted file mode 100644
index 61933d2233..0000000000
--- a/src/mainboard/tyan/s2735/Options.lb
+++ /dev/null
@@ -1,256 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_INIT
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_SERIAL_CPU_INIT
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-#512K bytes
-default CONFIG_ROM_SIZE=524288
-
-#1M bytes
-#default CONFIG_ROM_SIZE=1048576
-
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-#default CONFIG_CONSOLE_VGA=1
-#default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-#default CONFIG_DCACHE_RAM_BASE=0xF2000000
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2735"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb
deleted file mode 100644
index eaa338e041..0000000000
--- a/src/mainboard/tyan/s2850/Config.lb
+++ /dev/null
@@ -1,197 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2850
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT0
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- #chip drivers/ati/ragexl
- device pci b.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb
deleted file mode 100644
index a53d5b7272..0000000000
--- a/src/mainboard/tyan/s2850/Options.lb
+++ /dev/null
@@ -1,244 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2850"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb
deleted file mode 100644
index 6145ba7428..0000000000
--- a/src/mainboard/tyan/s2875/Config.lb
+++ /dev/null
@@ -1,189 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2875
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb
deleted file mode 100644
index 51913e30fb..0000000000
--- a/src/mainboard/tyan/s2875/Options.lb
+++ /dev/null
@@ -1,245 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=13
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2875"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
deleted file mode 100644
index 5e72afbbfb..0000000000
--- a/src/mainboard/tyan/s2880/Config.lb
+++ /dev/null
@@ -1,200 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2880
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end #broadcom
- device pci 9.1 on end
-# chip drivers/lsi/53c1030
-# device pci a.0 on end
-# device pci a.1 on end
-# register "fw_address" = "0xfff8c000"
-# end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end #some sata
- device pci 6.0 on end #adti
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb
deleted file mode 100644
index c41e03f356..0000000000
--- a/src/mainboard/tyan/s2880/Options.lb
+++ /dev/null
@@ -1,244 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=13
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2880"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb
deleted file mode 100644
index a46e0ef661..0000000000
--- a/src/mainboard/tyan/s2881/Config.lb
+++ /dev/null
@@ -1,233 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-object get_bus_conf.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2881
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end # Broadcom 5704
- device pci 9.1 on end
- device pci a.0 on end # Adaptic
- device pci a.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end # SiI
- device pci 6.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- chip drivers/i2c/adm1027 # ADT7463A CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3
- device i2c 2d on end
- end
- chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN
- device i2c 2a on end
- end
- chip drivers/generic/generic # Winbond HWM 0x92
- device i2c 49 on end
- end
- chip drivers/generic/generic # Winbond HWM 0x94
- device i2c 4a on end
- end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- end
-end
-
diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb
deleted file mode 100644
index 59002d27de..0000000000
--- a/src/mainboard/tyan/s2881/Options.lb
+++ /dev/null
@@ -1,261 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2881"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
deleted file mode 100644
index 266733154e..0000000000
--- a/src/mainboard/tyan/s2882/Config.lb
+++ /dev/null
@@ -1,227 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2882
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 6.0 on end # adaptec
- device pci 6.1 on end
- device pci 9.0 on end # broadcom 5704
- device pci 9.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 5.0 on end
- # chip drivers/ati/ragexl
- device pci 6.0 on end
- # end
- device pci 8.0 on end #intel 10/100
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.3 on
-# chip drivers/generic/generic #dimm 0-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 0-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-0
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-1
-# device i2c 55 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-0
-# device i2c 56 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-1
-# device i2c 57 on end
-# end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # NB
- end #pci_domain
-end
-
diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb
deleted file mode 100644
index d4ff6fef88..0000000000
--- a/src/mainboard/tyan/s2882/Options.lb
+++ /dev/null
@@ -1,244 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2882"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
deleted file mode 100644
index 26389a18ce..0000000000
--- a/src/mainboard/tyan/s2885/Config.lb
+++ /dev/null
@@ -1,233 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/si/3114
-object get_bus_conf.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-end
-
-else
-
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-end
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s2885
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT0
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- end
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end # broadcom 5703
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci b.0 on end # SiI 3114
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # acpi
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end #pci_domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end
-# device pnp 0.1 off end
-# device pnp 0.2 off end
-# device pnp 0.3 off end
-# device pnp 0.4 off end
-# device pnp 0.5 on end
-# end
-end
-
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb
deleted file mode 100644
index fc43fc834d..0000000000
--- a/src/mainboard/tyan/s2885/Options.lb
+++ /dev/null
@@ -1,269 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0a
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2885"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb
deleted file mode 100644
index 42627a35f1..0000000000
--- a/src/mainboard/tyan/s2891/Config.lb
+++ /dev/null
@@ -1,123 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/ati/ragexl
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
deleted file mode 100644
index a0ed35b74c..0000000000
--- a/src/mainboard/tyan/s2891/Options.lb
+++ /dev/null
@@ -1,302 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=512*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2891"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
deleted file mode 100644
index 38645588c7..0000000000
--- a/src/mainboard/tyan/s2892/Config.lb
+++ /dev/null
@@ -1,124 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-#dir /drivers/ati/ragexl
-
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
deleted file mode 100644
index e3f1606cf3..0000000000
--- a/src/mainboard/tyan/s2892/Options.lb
+++ /dev/null
@@ -1,290 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2892"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
deleted file mode 100644
index 1b7f808b40..0000000000
--- a/src/mainboard/tyan/s2895/Config.lb
+++ /dev/null
@@ -1,145 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- #./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-else
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
-end
-
-##
-## Setup Cache-As-Ram
-##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
deleted file mode 100644
index 6659c9ad38..0000000000
--- a/src/mainboard/tyan/s2895/Options.lb
+++ /dev/null
@@ -1,311 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2895"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb
deleted file mode 100644
index 35511f83ca..0000000000
--- a/src/mainboard/tyan/s2912/Config.lb
+++ /dev/null
@@ -1,315 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb
deleted file mode 100644
index 52d8202437..0000000000
--- a/src/mainboard/tyan/s2912/Options.lb
+++ /dev/null
@@ -1,355 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=3
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=0
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc8000
-default CONFIG_DCACHE_RAM_SIZE=0x08000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default CONFIG_MEM_TRAIN_SEQ=1
-default CONFIG_WAIT_BEFORE_CPUS_INIT=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2912"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb
deleted file mode 100644
index 538ababb8f..0000000000
--- a/src/mainboard/tyan/s2912_fam10/Config.lb
+++ /dev/null
@@ -1,320 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-if CONFIG_USE_FAILOVER_IMAGE
-else
- if CONFIG_AP_CODE_IN_CAR
- makerule ./apc_auto.o
- depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
- end
- ldscript /arch/i386/init/ldscript_apc.lb
- end
-end
-
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for MCP55
-##
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/mcp55/romstrap.inc
- ldscript /southbridge/nvidia/mcp55/romstrap.lds
- end
-end
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
- if CONFIG_USE_FAILOVER_IMAGE
- ldscript /arch/i386/lib/failover_failover.lds
- end
-else
- if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- end
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-dir /southbridge/nvidia/mcp55
-
-chip northbridge/amd/amdfam10/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_F_1207
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdfam10 #mc0
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on
- # SB on link 2.0.
- chip southbridge/nvidia/mcp55
- device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # SFI
- io 0x62 = 0x100
- end
- device pnp 2e.7 off # GPIO_GAME_MIDI
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # WDTO_PLED
- device pnp 2e.9 off end # GPIO_SUSLED
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master MCP55 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave MCP55 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # IDE
- device pci 5.0 on end # SATA 0
- device pci 5.1 on end # SATA 1
- device pci 5.2 on end # SATA 2
- device pci 6.0 on
- device pci 4.0 on end
- end # PCI
- device pci 6.1 off end # AZA
- device pci 8.0 on end # NIC
- device pci 9.0 on end # NIC
- device pci a.0 on end # PCI E 5
- device pci b.0 off end # PCI E 4
- device pci c.0 off end # PCI E 3
- device pci d.0 on end # PCI E 2
- device pci e.0 off end # PCI E 1
- device pci f.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
- register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- end # mc0
-
- end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 on end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # io
-# device pnp 0.9 off end # io
-# end
-end #root_complex
diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb
deleted file mode 100644
index d9444d810a..0000000000
--- a/src/mainboard/tyan/s2912_fam10/Options.lb
+++ /dev/null
@@ -1,362 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_ACPI_SSDTX_NUM
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_USBDEBUG_DIRECT
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_PCI_64BIT_PREF_MEM
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_PCI_BUS_SEGN_BITS
-
-uses CONFIG_AP_CODE_IN_CAR
-
-uses CONFIG_MEM_TRAIN_SEQ
-
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-
-uses CONFIG_AMDMCT
-
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_AMD_UCODE_PATCH_FILE
-uses CONFIG_ID_SECTION_OFFSET
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1024*1024
-#default CONFIG_ROM_SIZE=0x100000
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=16384*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-## ACPI tables will be included
-default CONFIG_GENERATE_ACPI_TABLES=0
-## extra SSDT num
-default CONFIG_ACPI_SSDTX_NUM=31
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
-default CONFIG_LOGICAL_CPUS=1
-
-#default CONFIG_SERIAL_CPU_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x00
-default CONFIG_LIFT_BSP_APIC_ID=1
-
-#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
-#2G
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
-#1G
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-#512M
-#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
-
-#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-#default CONFIG_USBDEBUG_DIRECT=1
-
-#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default CONFIG_HT_CHAIN_UNITID_BASE=1
-
-#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-#only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#allow capable device use that above 4G
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xc4000
-default CONFIG_DCACHE_RAM_SIZE=0x0c000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
-default CONFIG_USE_INIT=0
-
-default CONFIG_MEM_TRAIN_SEQ=2
-default CONFIG_WAIT_BEFORE_CPUS_INIT=0
-default CONFIG_AMDMCT = 1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="S2912 (Fam10)"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
-
-##
-## Set microcode patch file name
-##
-## Barcelona rev DR-Ax: "mc_patch_01000020.h"
-## Barcelona rev DR-B0, B1, BA: "mc_patch_01000096.h"
-## Barcelona rev DR-B2, B3: "mc_patch_01000095.h"
-## Shanghai rev DA-C2: "mc_patch_0100009f.h"
-##
-default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000095.h"
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = (128*1024) - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0xc0000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00200000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-#default CONFIG_COMPRESSED_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
deleted file mode 100644
index 5e1aaf5130..0000000000
--- a/src/mainboard/tyan/s4880/Config.lb
+++ /dev/null
@@ -1,195 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
-
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s4880
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
-# chip drivers/lsi/53c1030
-# device pci 4.0 on end
-# device pci 4.1 on end
-# register "fw_address" = "0xfff8c000"
-# end
- device pci 9.0 on end
- device pci 9.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci 6.0 on end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end #pci_domain
-end
-
diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb
deleted file mode 100644
index 05490b785f..0000000000
--- a/src/mainboard/tyan/s4880/Options.lb
+++ /dev/null
@@ -1,253 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=22
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=8
-default CONFIG_MAX_PHYSICAL_CPUS=4
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PART_NUMBER="s4880"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb
deleted file mode 100644
index bbb94f2116..0000000000
--- a/src/mainboard/tyan/s4882/Config.lb
+++ /dev/null
@@ -1,302 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end
-
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
- if CONFIG_USE_INIT
-
- makerule ./auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- end
-
- else
-
- makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
-
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
- ##
- ## Setup Cache-As-Ram
- ##
- mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-
-##
-## Setup RAM
-##
- if CONFIG_USE_INIT
- initobject auto.o
- else
- mainboardinit ./auto.inc
- end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-# sample config for tyan/s4882
-chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on end # LDT0
- device pci 18.0 on # northbridge
- # devices on link 1, link 1 == LDT 1
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
-# chip drivers/lsi/53c1030
-# device pci 4.0 on end
-# device pci 4.1 on end
-# register "fw_address" = "0xfff8c000"
-# end
- device pci 9.0 on end #Broadcom
- device pci 9.1 on end
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- #chip drivers/ati/ragexl
- device pci 6.0 on end
- #end
- device pci 5.0 on end #SiI
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
-# chip drivers/i2c/i2cmux # pca9556 smbus mux
-# device i2c 18 on #0 pca9516 2, 1
-# chip drivers/i2c/lm63 #cpu0 temp
-# device i2c 4c on end
-# end
-# end
-# device i2c 18 on #1 pca9516 1, 1
-# chip drivers/generic/generic #dimm 1-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #2 pca9516 1, 2
-# chip drivers/generic/generic #dimm 0-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 0-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #3 pca9516 1, 3
-# chip drivers/generic/generic #dimm 3-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 3-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 3-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 3-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #4 pca9516 1, 4
-# chip drivers/generic/generic #dimm 2-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 2-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 2-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 2-1-1
-# device i2c 53 on end
-# end
-# end
-# device i2c 18 on #5 pca9516 2, 2
-# chip drivers/i2c/lm63 #cpu1 temp
-# device i2c 4c on end
-# end
-# end
-# device i2c 18 on #6 pca9516 2, 3
-# chip drivers/i2c/lm63 #cpu2 temp
-# device i2c 4c on end
-# end
-# end
-# device i2c 18 on #7 pca9516 2, 4
-# chip drivers/i2c/lm63 #cpu3 temp
-# device i2c 4c on end
-# end
-# end
-# end # i2cmux
-# chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN...
-# device i2c 2e on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid
-# device i2c 2a on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x92
-# device i2c 49 on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x94
-# device i2c 4a on end
-# end
-# chip drivers/generic/generic # ??
-# device i2c 69 on end
-# end
- end # acpi
- device pci 1.5 off end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.0 on end
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 off end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 on end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 on end # dual core msr
-# device pnp 0.6 on end # cache size
-# device pnp 0.7 on end # tsc
-# end
-end
-
diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb
deleted file mode 100644
index 820fc3be2f..0000000000
--- a/src/mainboard/tyan/s4882/Options.lb
+++ /dev/null
@@ -1,252 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=524288
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=22
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=8
-default CONFIG_MAX_PHYSICAL_CPUS=4
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-#VGA Console
-#default CONFIG_CONSOLE_VGA=1
-#default CONFIG_PCI_ROM_RUN=1
-
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=1
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PART_NUMBER="s4882"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00002000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/via/epia-cn/Config.lb b/src/mainboard/via/epia-cn/Config.lb
deleted file mode 100644
index 42d62cbacf..0000000000
--- a/src/mainboard/via/epia-cn/Config.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/via/cn700 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # AGP Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # Memory Controller
- device pci 0.4 on end # Power Management
- device pci 0.7 on end # V-Link Controller
- device pci 1.0 on end # PCI Bridge
- chip southbridge/via/vt8237r # Southbridge
- # Enable both IDE channels.
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- # Both cables are 40pin.
- register "ide0_80pin_cable" = "0"
- register "ide1_80pin_cable" = "0"
- device pci f.0 on end # IDE
- register "fn_ctrl_lo" = "0x80"
- register "fn_ctrl_hi" = "0x1d"
- device pci 10.0 on end # OHCI
- device pci 10.1 on end # OHCI
- device pci 10.2 on end # OHCI
- device pci 10.3 on end # OHCI
- device pci 10.4 on end # EHCI
- device pci 10.5 on end # UDCI
- device pci 11.0 on # Southbridge LPC
- chip superio/via/vt1211 # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0xec00
- end
- end
- end
- device pci 11.5 on end # AC'97 audio
- # device pci 11.6 off end # AC'97 Modem
- device pci 12.0 on end # Ethernet
- end
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/via/model_c7 # VIA C7
- device apic 0 on end # APIC
- end
- end
-end
diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb
deleted file mode 100644
index 718c75d8fb..0000000000
--- a/src/mainboard/via/epia-cn/Options.lb
+++ /dev/null
@@ -1,98 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_VIDEO_MB
-uses CONFIG_IOAPIC
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_IOAPIC = 1
-default CONFIG_VIDEO_MB = 32
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 9
-default CONFIG_GENERATE_ACPI_TABLES = 0
-default CONFIG_HAVE_OPTION_TABLE = 1
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_USE_FALLBACK_IMAGE = 1
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
-default HOSTCC = "gcc"
-
-end
diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb
deleted file mode 100644
index 011ce5ad24..0000000000
--- a/src/mainboard/via/epia-m/Config.lb
+++ /dev/null
@@ -1,159 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-object vgabios.o
-
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/via/vt8623
-
- device apic_cluster 0 on
- chip cpu/via/model_c3
- device apic 0 on end
- end
- end
-
- device pci_domain 0 on
- chip southbridge/via/vt8235
-
- device pci 10.0 on end # USB 1.1
- device pci 10.1 on end # USB 1.1
- device pci 10.2 on end # USB 1.1
- device pci 10.3 on end # USB 2
-
- device pci 11.0 on # Southbridge
- chip superio/via/vt1211
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0xec00
- end
-
- end
- end
-
- device pci 11.1 on end # IDE
- # 2-4 non existant?
- device pci 11.5 on end # AC97 Audio
- device pci 11.6 off end # AC97 Modem
- device pci 12.0 on end # Ethernet
- end
-# This is on the EPIA MII, not the M.
- chip southbridge/ricoh/rl5c476
- register "enable_cf" = "1"
- device pci 0a.0 on end
- device pci 0a.1 on end
- end
- end
-end
diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb
deleted file mode 100644
index 4583331f55..0000000000
--- a/src/mainboard/via/epia-m/Options.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-default CONFIG_PCI_ROM_RUN=0
-default CONFIG_CONSOLE_VGA=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Use TSC for udelay.
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=5
-
-
-##
-## Build code to load acpi tables
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_CONSOLE_SERIAL8250=1
-end
diff --git a/src/mainboard/via/epia-m700/Config.lb b/src/mainboard/via/epia-m700/Config.lb
deleted file mode 100644
index d7d7cbedc8..0000000000
--- a/src/mainboard/via/epia-m700/Config.lb
+++ /dev/null
@@ -1,165 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 One Laptop per Child, Association, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-driver wakeup.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- # object ssdt.o
- object acpi_tables.o
-end
-# These lines maybe noused.
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-if CONFIG_USE_DCACHE_RAM
- if CONFIG_USE_INIT
- makerule ./cache_as_ram_auto.o
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
- end
- else
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
- end
- end
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-ldscript /cpu/x86/16bit/entry16.lds
-
-mainboardinit northbridge/via/vx800/romstrap.inc
-ldscript /northbridge/via/vx800/romstrap.lds
-
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-# mainboardinit arch/i386/lib/cpu_reset.inc
-# Here cpu_reset.inc have label _cpu_reset, which is needed in failover.c,
-# but cpu_reset.inc also has code to jump to __main() which is not included
-# in cache_as_ram_auto_auto.c.
-
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-if CONFIG_USE_DCACHE_RAM
- mainboardinit cpu/via/car/cache_as_ram.inc
-end
-
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- # failover.inc need definition in cpu_reset.inc, but we do not include
- # cpu_reset.inc,so ...
- # mainboardinit ./failover.inc
-end
-# mainboardinit cpu/x86/fpu_enable.inc
-
-if CONFIG_USE_DCACHE_RAM
- if CONFIG_USE_INIT
- initobject cache_as_ram_auto.o
- else
- mainboardinit ./cache_as_ram_auto.inc
- end
-end
-
-# mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-
-config chip.h
-
-chip northbridge/via/vx800 # Northbridge
- device pci_domain 0 on
- device pci 0.0 on end # Host Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # PCI to PCI Bridge
- device pci 0.4 on end # Power Management
- device pci 0.5 on end # APIC and Central Traffic Control
- device pci 0.6 on end # Scratch Registers
- device pci 0.7 on end # North-South Module Interface Control
- device pci 1.0 on end # PCI Bridge
- device pci f.0 on end # IDE/SATA
- # device pci f.1 on end # IDE
- device pci 10.0 on end # USB 1.1
- device pci 10.1 on end # USB 1.1
- device pci 10.2 on end # USB 1.1
- device pci 10.4 on end # USB 2.0
- device pci 11.0 on # Bus Control and Power Management (SB, LPC)
- chip superio/winbond/w83697hf
- # TODO: Check all devices, this may need some more work.
- device pnp 2e.0 off # Floppy (N/A?)
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port (N/A?)
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 4
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 off end # Consumer IR
- device pnp 2e.7 off end # Game port, GPIO 1
- device pnp 2e.8 off end # MIDI port, GPIO 5
- device pnp 2e.9 off end # GPIO 2-4
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HWM
- io 0x60 = 0x290
- end
- end
- end
- device pci 11.7 on end # North-South Module Interface Control
- device pci 14.0 on end # HD Audio (Azalia)
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/via/model_c7 # VIA C7
- device apic 0 on end # APIC
- end
- end
-end
diff --git a/src/mainboard/via/epia-m700/Options.lb b/src/mainboard/via/epia-m700/Options.lb
deleted file mode 100644
index fffa5502d7..0000000000
--- a/src/mainboard/via/epia-m700/Options.lb
+++ /dev/null
@@ -1,138 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 One Laptop per Child, Association, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_VIDEO_MB
-uses CONFIG_IOAPIC
-
-## New options
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-#uses MAX_RAM_SLOTS
-#uses USB_ENABLE
-#uses EHCI_ENABLE
-#uses HPET_ENABLE
-#uses USB_PORTNUM
-#uses FULL_ROM_SIZE
-#uses FULL_ROM_BASE
-#uses PAYLOAD_IS_SEABIOS
-#uses VIACONFIG_TOP_SM_SIZE_MB
-#uses VIACONFIG_VGA_PCI_10
-#uses VIACONFIG_VGA_PCI_14
-
-## New options
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xffef0000
-# default CONFIG_DCACHE_RAM_BASE = 0xffbf0000
-# default CONFIG_DCACHE_RAM_BASE = 0xfec00000 # HPET may use this.
-default CONFIG_DCACHE_RAM_SIZE = 8 * 1024
-default CONFIG_USE_INIT = 0
-#default MAX_RAM_SLOTS = 2
-#default USB_ENABLE = 1
-#default EHCI_ENABLE = 1
-#default HPET_ENABLE = 1
-#default USB_PORTNUM = 2
-#default FULL_ROM_SIZE = 512 * 1024
-#default FULL_ROM_BASE = (0xffffffff - FULL_ROM_SIZE + 1)
-#default VIACONFIG_TOP_SM_SIZE_MB = 0
-# default VIACONFIG_VGA_PCI_10 = 0xd0000008
-# default VIACONFIG_VGA_PCI_14 = 0xfd000000
-#default VIACONFIG_VGA_PCI_10 = 0xf8000008
-#default VIACONFIG_VGA_PCI_14 = 0xfc000000
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_IOAPIC = 1
-
-# Define framebuffer size of VX800's integrated graphics card.
-# Supports: 32, 64, 128, 256.
-default CONFIG_VIDEO_MB = 64
-
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_HARD_RESET = 0
-# TODO: There is an irq_tables.c file, should it be used?
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_IRQ_SLOT_COUNT = 13
-default CONFIG_GENERATE_ACPI_TABLES = 1
-default CONFIG_HAVE_OPTION_TABLE = 1
-default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_USE_FALLBACK_IMAGE = 1
-default CONFIG_STACK_SIZE = 16 * 1024
-default CONFIG_HEAP_SIZE = 20 * 1024
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-
-end
diff --git a/src/mainboard/via/epia-n/Config.lb b/src/mainboard/via/epia-n/Config.lb
deleted file mode 100644
index ac0ef8bde9..0000000000
--- a/src/mainboard/via/epia-n/Config.lb
+++ /dev/null
@@ -1,202 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-#object vgabios.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
-#acpi_create_fadt is located in VT8237R code
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/via/cn400 # Northbridge
-
- device apic_cluster 0 on # APIC cluster
- chip cpu/via/model_c3 # VIA C3
- device apic 0 on end # APIC
- end
- end
-
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # AGP Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # Memory Controller
- device pci 0.4 on end # Power Management
- device pci 0.7 on end # V-Link Controller
- device pci 1.0 on end # PCI Bridge
- chip southbridge/via/vt8237r # Southbridge
- # Enable both IDE channels.
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- # Both cables are 40pin.
- register "ide0_80pin_cable" = "0"
- register "ide1_80pin_cable" = "0"
- device pci f.0 on end # IDE/SATA
- device pci f.1 on end # IDE
- register "fn_ctrl_lo" = "0xC0" # Disable AC/MC97
- register "fn_ctrl_hi" = "0x9d" # Disable USB Direct & LAN Gating
- device pci 10.0 on end # OHCI
- device pci 10.1 on end # OHCI
- device pci 10.2 on end # OHCI
- device pci 10.3 on end # OHCI
- device pci 10.4 on end # EHCI
- device pci 10.5 off end # USB Direct
- device pci 11.0 on # Southbridge LPC
- chip superio/winbond/w83697hf # Super I/O
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 off # IR Port
- io 0x60 = 0x000
- end
- device pnp 2e.7 off # GPIO 1
- io 0x60 = 0x201 # 0x201
- end
- device pnp 2e.8 off # GPIO 5
- io 0x60 = 0x330 # 0x330
- end
- device pnp 2e.9 off # GPIO 2, 3,and 4
- io 0x60 = 0x000 #
- end
- device pnp 2e.a off # ACPI
- io 0x60 = 0x000 #
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0x290
- irq 0x70 = 0
- end
- end
- end
- device pci 11.5 off end # AC'97 audio
- device pci 11.6 off end # AC'97 Modem
- device pci 12.0 on end # Ethernet
- end
- end
-end
diff --git a/src/mainboard/via/epia-n/Options.lb b/src/mainboard/via/epia-n/Options.lb
deleted file mode 100644
index 416b8128d9..0000000000
--- a/src/mainboard/via/epia-n/Options.lb
+++ /dev/null
@@ -1,113 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 VIA Technologies, Inc.
-## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_RAMTOP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_SMP
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_VIDEO_MB
-uses CONFIG_IOAPIC
-uses CONFIG_COMPRESS
-uses CONFIG_EPIA_VT8237R_INIT
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019
-default CONFIG_EPIA_VT8237R_INIT = 1
-#default CONFIG_RAMTOP = 4 * 1024*1024
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_COMPRESS = 1
-default CONFIG_IOAPIC = 1
-default CONFIG_VIDEO_MB = 64
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_HAVE_FAILOVER_BOOT = 0
-default CONFIG_USE_FAILOVER_IMAGE = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_SMP = 1
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7
-default CONFIG_GENERATE_ACPI_TABLES = 1
-default CONFIG_HAVE_OPTION_TABLE = 1
-#default CONFIG_ROM_IMAGE_SIZE = 67 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_USE_FALLBACK_IMAGE = 1
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CROSS_COMPILE)gcc -m32 -fno-stack-protector"
-default HOSTCC = "gcc"
-#default CONFIG_MAINBOARD = "EPIA-N"
-default CONFIG_HAVE_MAINBOARD_RESOURCES = 1
-
-end
diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb
deleted file mode 100644
index c75c21e060..0000000000
--- a/src/mainboard/via/epia/Config.lb
+++ /dev/null
@@ -1,156 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/via/vt8601
- device pci_domain 0 on
- device pci 0.0 on end # Northbridge
-# device pci 0.1 on # AGP bridge
- # device pci 0.0 on end # Integrated VGA
-# end
- chip southbridge/via/vt8231
- register "enable_native_ide" = "0"
- register "enable_com_ports" = "1"
- register "enable_keyboard" = "0"
- device pci 11.0 on # Southbrdge
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- register "com1" = "{CONFIG_TTYS0_BAUD}"
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- end
- device pci 11.1 on end # Ide
- device pci 11.2 off end # Usb port 0-1
- device pci 11.3 off end # Usb port 2-3
- device pci 11.4 off end # ACPI
- device pci 11.5 off end # AC97 Audio
- device pci 11.6 on end # AC97 Modem
- device pci 12.0 on end # Ethernet
- end
- end
-
- device apic_cluster 0 on
- chip cpu/via/model_c3
- device apic 0 on end
- end
- end
-end
diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb
deleted file mode 100644
index 466ffcc382..0000000000
--- a/src/mainboard/via/epia/Options.lb
+++ /dev/null
@@ -1,143 +0,0 @@
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_UDELAY_IO
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-
-# logging
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-
-# logging
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019
-
-default CONFIG_CONSOLE_SERIAL8250=1
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=0
-
-##
-## use io based udelay function
-## disable IO and enable TSC on Nehemiah boards
-##
-default CONFIG_UDELAY_IO=1
-default CONFIG_UDELAY_TSC=0
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=5
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-end
diff --git a/src/mainboard/via/pc2500e/Config.lb b/src/mainboard/via/pc2500e/Config.lb
deleted file mode 100644
index 01c226670e..0000000000
--- a/src/mainboard/via/pc2500e/Config.lb
+++ /dev/null
@@ -1,161 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object dsdt.o
- object acpi_tables.o
-end
-makerule ./failover.E
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-dir /pc80
-config chip.h
-
-chip northbridge/via/cn700 # Northbridge
- device pci_domain 0 on # PCI domain
- device pci 0.0 on end # AGP Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # Memory Controller
- device pci 0.4 on end # Power Management
- device pci 0.7 on end # V-Link Controller
- device pci 1.0 on end # PCI Bridge
- chip southbridge/via/vt8237r # Southbridge
- # Enable both IDE channels.
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- # Both cables are 40pin.
- register "ide0_80pin_cable" = "0"
- register "ide1_80pin_cable" = "0"
- device pci f.0 on end # SATA
- device pci f.1 on end # IDE
- register "fn_ctrl_lo" = "0x80"
- register "fn_ctrl_hi" = "0x1d"
- device pci 10.0 on end # UHCI
- device pci 10.1 on end # UHCI
- device pci 10.2 on end # UHCI
- device pci 10.3 on end # UHCI
- device pci 10.4 on end # EHCI
- device pci 10.5 on end # UDCI
- device pci 11.0 on # Southbridge LPC
- chip superio/ite/it8716f # Super I/O
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.2 off # COM2 (N/A on this board)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.4 on # Environment controller
- io 0x60 = 0x290
- io 0x62 = 0x0000
- irq 0x70 = 9
- end
- device pnp 2e.5 off # PS/2 keyboard (not used)
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 off # PS/2 mouse (not used)
- irq 0x70 = 12
- end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0x0000
- io 0x62 = 0x0800
- io 0x64 = 0x0000
- end
- device pnp 2e.8 off # MIDI port (N/A)
- io 0x60 = 0x300
- irq 0x70 = 10
- end
- device pnp 2e.9 off # Game port (N/A)
- io 0x60 = 0x201
- end
- device pnp 2e.a on # Consumer IR
- io 0x60 = 0x310
- irq 0x70 = 11
- end
- end
- end
- device pci 11.5 on end # AC'97 audio
- # device pci 11.6 off end # AC'97 modem (N/A)
- device pci 12.0 on end # Ethernet
- end
- end
- device apic_cluster 0 on # APIC cluster
- chip cpu/via/model_c7 # VIA C7
- device apic 0 on end # APIC
- end
- end
-end
diff --git a/src/mainboard/via/pc2500e/Options.lb b/src/mainboard/via/pc2500e/Options.lb
deleted file mode 100644
index 9e4896050b..0000000000
--- a/src/mainboard/via/pc2500e/Options.lb
+++ /dev/null
@@ -1,109 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-uses CONFIG_SMP
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_VIDEO_MB
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_IOAPIC = 1
-default CONFIG_VIDEO_MB = 32
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_PCI_ROM_RUN = 0
-default CONFIG_CONSOLE_VGA = 0
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_SMP = 1
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 10
-default CONFIG_GENERATE_ACPI_TABLES = 0
-default CONFIG_HAVE_OPTION_TABLE = 1
-default CONFIG_USE_FALLBACK_IMAGE = 1
-default CONFIG_MAINBOARD_VENDOR = "VIA"
-default CONFIG_MAINBOARD_PART_NUMBER = "pc2500e"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0xaa51
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 1
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32 -fno-stack-protector"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-end
diff --git a/src/mainboard/via/vt8454c/Config.lb b/src/mainboard/via/vt8454c/Config.lb
deleted file mode 100644
index 6faa33c3b2..0000000000
--- a/src/mainboard/via/vt8454c/Config.lb
+++ /dev/null
@@ -1,163 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2009 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_MP_TABLE
- object mptable.o
-end
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
-if CONFIG_GENERATE_ACPI_TABLES
- object fadt.o
- object acpi_tables.o
- makerule dsdt.c
- depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
- action "iasl -p dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
- action "mv dsdt.hex dsdt.c"
- end
- object ./dsdt.o
-end
-
-##
-## Romcc output
-##
-makerule ./auto.inc
- depends "$(CONFIG_MAINBOARD)/auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-mainboardinit cpu/via/car/cache_as_ram.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/via/cx700
- device apic_cluster 0 on
- chip cpu/via/model_c7
- device apic 0 on end
- end
- end
- device pci_domain 0 on
- device pci 0.0 on end # AGP Bridge
- device pci 0.1 on end # Error Reporting
- device pci 0.2 on end # Host Bus Control
- device pci 0.3 on end # Memory Controller
- device pci 0.4 on end # Power Management
- device pci 0.7 on end # V-Link Controller
- device pci 1.0 on # PCI Bridge
- device pci 0.0 on end # Onboard Video
- end # PCI Bridge
- device pci f.0 on end # IDE/SATA
- #device pci f.1 on end # IDE
- device pci 10.0 on end # USB 1.1
- device pci 10.1 on end # USB 1.1
- device pci 10.2 on end # USB 1.1
- device pci 10.4 on end # USB 2.0
- device pci 11.0 on # Southbridge LPC
- chip superio/via/vt1211
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.b on # HWM
- io 0x60 = 0xec00
- end
- end # superio
- end # pci 11.0
- # 1-4 non existant
- #device pci 11.5 on end # AC97 Audio
- #device pci 11.6 off end # AC97 Modem
- #device pci 12.0 on end # Ethernet
- end # pci domain 0
-end # cx700
-
diff --git a/src/mainboard/via/vt8454c/Options.lb b/src/mainboard/via/vt8454c/Options.lb
deleted file mode 100644
index cb796caf97..0000000000
--- a/src/mainboard/via/vt8454c/Options.lb
+++ /dev/null
@@ -1,233 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007-2009 coresystems GmbH
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License as
-## published by the Free Software Foundation; version 2 of
-## the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-## MA 02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_HAVE_LOW_TABLES
-
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-
-uses CONFIG_COMPRESS
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-
-# compiler specifics
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-
-# Console specifics
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_SMP
-uses CONFIG_IOAPIC
-
-uses CONFIG_GDB_STUB
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_PRINTK_IN_CAR
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE = 256*1024
-
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xffef0000
-#default CONFIG_DCACHE_RAM_BASE=0xffbf0000
-#default CONFIG_DCACHE_RAM_BASE=0xfec00000
-default CONFIG_DCACHE_RAM_SIZE=0x8000
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-###
-### Leave this to 0; VGA is handled by seperate code.
-###
-default CONFIG_PCI_ROM_RUN=0
-default CONFIG_CONSOLE_VGA=0
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Use TSC for udelay.
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to load acpi tables
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Build code to fill in tables both in low and high memory
-##
-default CONFIG_HAVE_LOW_TABLES=1
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_SMP=1
-default CONFIG_IOAPIC=1
-
-###
-### LinuxBIOS layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-## Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5
-## At a maximum only compile in this level of debugging
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5
-end
-