Convert all Intel i810 boards to CAR.

 - Drop "select ROMCC" from the boards, as well as early_mtrr stuff.

 - Add "select CACHE_AS_RAM" to socket_PGA370/Kconfig, as well as the
   usual DCACHE_RAM_BASE and DCACHE_RAM_SIZE variables.

 - In socket_PGA370/Makefile.inc add:
   cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc

 - Other smaller related fixes.

Abuild-tested and boot-tested on MSI MS-6178.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

15 files changed, 24 insertions, 120 deletions

diff --git a/src/mainboard/asus/mew-am/Kconfig b/src/mainboard/asus/mew-am/Kconfig
index afe6a0dee3..68ac160b33 100644
--- a/src/mainboard/asus/mew-am/Kconfig
+++ b/src/mainboard/asus/mew-am/Kconfig
@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_SMSC_SMSCSUPERIO
-	select ROMCC
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
diff --git a/src/mainboard/asus/mew-am/romstage.c b/src/mainboard/asus/mew-am/romstage.c
index 51d97a37dc..402789c0af 100644
--- a/src/mainboard/asus/mew-am/romstage.c
+++ b/src/mainboard/asus/mew-am/romstage.c
@@ -26,31 +26,21 @@
 #include <arch/romcc_io.h>
 #include <arch/hlt.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "northbridge/intel/i82810/raminit.h"
 #include "lib/debug.c"
 #include "pc80/udelay_io.c"
 #include "lib/delay.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
-
-static inline int spd_read_byte(unsigned int device, unsigned int address)
-{
-	return smbus_read_byte(device, address);
-}
-
 #include "northbridge/intel/i82810/raminit.c"
 /* #include "northbridge/intel/i82810/debug.c" */
+#include <lib.h>
 
-static void main(unsigned long bist)
-{
-	if (bist == 0)
-		early_mtrr_init();
+#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
 
+void main(unsigned long bist)
+{
 	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();
@@ -60,6 +50,4 @@ static void main(unsigned long bist)
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/asus/mew-vm/Kconfig b/src/mainboard/asus/mew-vm/Kconfig
index bc952dccbd..4e461923ad 100644
--- a/src/mainboard/asus/mew-vm/Kconfig
+++ b/src/mainboard/asus/mew-vm/Kconfig
@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_SMSC_LPC47B272
-	select ROMCC
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
diff --git a/src/mainboard/asus/mew-vm/romstage.c b/src/mainboard/asus/mew-vm/romstage.c
index 30d6a87214..e4c551eb60 100644
--- a/src/mainboard/asus/mew-vm/romstage.c
+++ b/src/mainboard/asus/mew-vm/romstage.c
@@ -26,42 +26,28 @@
 #include <arch/hlt.h>
 #include <stdlib.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "superio/smsc/lpc47b272/lpc47b272_early_serial.c"
 #include "northbridge/intel/i82810/raminit.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B272_SP1)
-
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "lib/debug.c"
 #include "pc80/udelay_io.c"
 #include "lib/delay.c"
 #include "northbridge/intel/i82810/raminit.c"
 #include "northbridge/intel/i82810/debug.c"
+#include <lib.h>
 
-static void main(unsigned long bist)
-{
-	if (bist == 0)
-		early_mtrr_init();
+#define SERIAL_DEV PNP_DEV(0x2e, LPC47B272_SP1)
 
+void main(unsigned long bist)
+{
 	lpc47b272_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();
-
 	enable_smbus();
-
-	/* Halt if there was a built in self test failure. */
 	report_bist_failure(bist);
-
-	/* dump_spd_registers(); */
-
+	dump_spd_registers();
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-
-	/* Check RAM. */
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/ecs/p6iwp-fe/Kconfig b/src/mainboard/ecs/p6iwp-fe/Kconfig
index eecae4d4bd..7d377f4717 100644
--- a/src/mainboard/ecs/p6iwp-fe/Kconfig
+++ b/src/mainboard/ecs/p6iwp-fe/Kconfig
@@ -26,7 +26,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_ITE_IT8712F
-	select ROMCC
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
diff --git a/src/mainboard/ecs/p6iwp-fe/romstage.c b/src/mainboard/ecs/p6iwp-fe/romstage.c
index f84ff465c9..b899d938af 100644
--- a/src/mainboard/ecs/p6iwp-fe/romstage.c
+++ b/src/mainboard/ecs/p6iwp-fe/romstage.c
@@ -27,37 +27,21 @@
 #include <arch/romcc_io.h>
 #include <arch/hlt.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "northbridge/intel/i82810/raminit.h"
 #include "lib/debug.c"
 #include "pc80/udelay_io.c"
 #include "lib/delay.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "superio/ite/it8712f/it8712f_early_serial.c"
-
-static inline int spd_read_byte(unsigned int device, unsigned int address)
-{
-	return smbus_read_byte(device, address);
-}
-
 #include "northbridge/intel/i82810/raminit.c"
 #include "northbridge/intel/i82810/debug.c"
+#include <lib.h>
 
-/* Early mainboard specific GPIO setup. */
-static void mb_gpio_init(void)
+void main(unsigned long bist)
 {
-}
-
-static void main(unsigned long bist)
-{
-	if (bist == 0)
-		early_mtrr_init();
-
 	it8712f_24mhz_clkin();
 	it8712f_enable_serial(0, CONFIG_TTYS0_BASE); // Does not use its 1st parameter
-	mb_gpio_init();
 	uart_init();
 	console_init();
 	report_bist_failure(bist);
@@ -67,6 +51,4 @@ static void main(unsigned long bist)
 	sdram_set_spd_registers();
 	sdram_enable();
 	dump_spd_registers();
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/hp/e_vectra_p2706t/Kconfig b/src/mainboard/hp/e_vectra_p2706t/Kconfig
index 7186dae605..5fab95a2c6 100644
--- a/src/mainboard/hp/e_vectra_p2706t/Kconfig
+++ b/src/mainboard/hp/e_vectra_p2706t/Kconfig
@@ -29,7 +29,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_NSC_PC87360
-	select ROMCC
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
diff --git a/src/mainboard/hp/e_vectra_p2706t/romstage.c b/src/mainboard/hp/e_vectra_p2706t/romstage.c
index 50f59df2ba..39cb2669c0 100644
--- a/src/mainboard/hp/e_vectra_p2706t/romstage.c
+++ b/src/mainboard/hp/e_vectra_p2706t/romstage.c
@@ -26,40 +26,30 @@
 #include <arch/hlt.h>
 #include <stdlib.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 /* TODO: It's a PC87364 actually! */
 #include "superio/nsc/pc87360/pc87360_early_serial.c"
 /* TODO: It's i810E actually! */
 #include "northbridge/intel/i82810/raminit.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "pc80/udelay_io.c"
 #include "lib/debug.c"
 #include "northbridge/intel/i82810/raminit.c"
+#include <lib.h>
 
 /* TODO: It's a PC87364 actually! */
 #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
 
-static void main(unsigned long bist)
+void main(unsigned long bist)
 {
-	if (bist == 0)
-		early_mtrr_init();
-
 	/* TODO: It's a PC87364 actually! */
 	pc87360_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
 	uart_init();
 	console_init();
-
 	enable_smbus();
-
 	report_bist_failure(bist);
-
 	/* dump_spd_registers(); */
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/intel/d810e2cb/romstage.c b/src/mainboard/intel/d810e2cb/romstage.c
index 34371f5834..94f1170534 100644
--- a/src/mainboard/intel/d810e2cb/romstage.c
+++ b/src/mainboard/intel/d810e2cb/romstage.c
@@ -35,21 +35,15 @@
 #include "cpu/x86/bist.h"
 #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
 #include "gpio.c"
+#include "northbridge/intel/i82810/raminit.c"
+/* #include "northbridge/intel/i82810/debug.c" */
 #include <lib.h>
 
 #define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
 
-static inline int spd_read_byte(unsigned int device, unsigned int address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/i82810/raminit.c"
-/* #include "northbridge/intel/i82810/debug.c" */
-
 void main(unsigned long bist)
 {
-	/* Set southbridge and superio gpios */
+	/* Set southbridge and Super I/O GPIOs. */
 	mb_gpio_init();
 
 	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
@@ -62,6 +56,4 @@ void main(unsigned long bist)
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/mitac/6513wu/Kconfig b/src/mainboard/mitac/6513wu/Kconfig
index 77ed6e9153..fac565e97d 100644
--- a/src/mainboard/mitac/6513wu/Kconfig
+++ b/src/mainboard/mitac/6513wu/Kconfig
@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_SMSC_SMSCSUPERIO
-	select ROMCC
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
diff --git a/src/mainboard/mitac/6513wu/romstage.c b/src/mainboard/mitac/6513wu/romstage.c
index bbf87568c6..1a2d7c4f0c 100644
--- a/src/mainboard/mitac/6513wu/romstage.c
+++ b/src/mainboard/mitac/6513wu/romstage.c
@@ -26,31 +26,21 @@
 #include <arch/romcc_io.h>
 #include <arch/hlt.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "northbridge/intel/i82810/raminit.h"
 #include "lib/debug.c"
 #include "pc80/udelay_io.c"
 #include "lib/delay.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
-
-#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
-
-static inline int spd_read_byte(unsigned int device, unsigned int address)
-{
-	return smbus_read_byte(device, address);
-}
-
 #include "northbridge/intel/i82810/raminit.c"
 /* #include "northbridge/intel/i82810/debug.c" */
+#include <lib.h>
 
-static void main(unsigned long bist)
-{
-	if (bist == 0)
-		early_mtrr_init();
+#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
 
+void main(unsigned long bist)
+{
 	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();
@@ -61,6 +51,4 @@ static void main(unsigned long bist)
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/msi/ms6178/Kconfig b/src/mainboard/msi/ms6178/Kconfig
index fc8f425d29..4b6d4e46df 100644
--- a/src/mainboard/msi/ms6178/Kconfig
+++ b/src/mainboard/msi/ms6178/Kconfig
@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_WINBOND_W83627HF
-	select ROMCC
 	select HAVE_PIRQ_TABLE
 	select BOARD_ROMSIZE_KB_512
 	select HAVE_MAINBOARD_RESOURCES
diff --git a/src/mainboard/msi/ms6178/romstage.c b/src/mainboard/msi/ms6178/romstage.c
index 6d25c4d2e7..5aab983c57 100644
--- a/src/mainboard/msi/ms6178/romstage.c
+++ b/src/mainboard/msi/ms6178/romstage.c
@@ -26,23 +26,19 @@
 #include <arch/hlt.h>
 #include <stdlib.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "northbridge/intel/i82810/raminit.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "pc80/udelay_io.c"
 #include "lib/debug.c"
 #include "northbridge/intel/i82810/raminit.c"
+#include <lib.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
 
-static void main(unsigned long bist)
+void main(unsigned long bist)
 {
-	if (bist == 0)
-		early_mtrr_init();
-
 	/* FIXME */
 	outb(0x87, 0x2e);
 	outb(0x87, 0x2e);
@@ -61,6 +57,4 @@ static void main(unsigned long bist)
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-	/* ram_check(0, 640 * 1024); */
 }
-
diff --git a/src/mainboard/nec/powermate2000/Kconfig b/src/mainboard/nec/powermate2000/Kconfig
index d0f29bb255..55050c0001 100644
--- a/src/mainboard/nec/powermate2000/Kconfig
+++ b/src/mainboard/nec/powermate2000/Kconfig
@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_INTEL_I82810
 	select SOUTHBRIDGE_INTEL_I82801AX
 	select SUPERIO_SMSC_SMSCSUPERIO
-	select ROMCC
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
diff --git a/src/mainboard/nec/powermate2000/romstage.c b/src/mainboard/nec/powermate2000/romstage.c
index b9a3744e3c..8f71cc9d4b 100644
--- a/src/mainboard/nec/powermate2000/romstage.c
+++ b/src/mainboard/nec/powermate2000/romstage.c
@@ -26,34 +26,25 @@
 #include <arch/hlt.h>
 #include <stdlib.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
 #include "northbridge/intel/i82810/raminit.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 #include "southbridge/intel/i82801ax/i82801ax_early_smbus.c"
 #include "pc80/udelay_io.c"
 #include "northbridge/intel/i82810/raminit.c"
+#include <lib.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
 
-static void main(unsigned long bist)
+void main(unsigned long bist)
 {
-	if (bist == 0)
-		early_mtrr_init();
-
 	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();
-
 	enable_smbus();
-
 	report_bist_failure(bist);
-
 	/* dump_spd_registers(); */
 	sdram_set_registers();
 	sdram_set_spd_registers();
 	sdram_enable();
-	/* ram_check(0, 640 * 1024); */
 }
-