diff options
| author | Michael Niewöhner <foss@mniewoehner.de> | 2020-11-08 19:32:13 +0100 |
|---|---|---|
| committer | Michael Niewöhner <foss@mniewoehner.de> | 2020-12-30 00:31:47 +0000 |
| commit | 6c3ba50a444d969c3086ab18d5123f119295748b (patch) | |
| tree | ea6ff716c713e5fe110d66d718e39544359350e7 /src/mainboard | |
| parent | 8281a537666081b7785178c4375b5e23e6e2a93a (diff) | |
mb/supermicro/x11ssh-tf: configure "POST complete" gpio for IPMI driver
Configure the "POST complete" gpio in the devicetree for the BMC/IPMI
driver and set the pad's initial value to 0 since the signal is active-
high and shall be set by the IPMI/BMC driver.
Also add the pad to early gpio config, since it is expected to have an
external pull-up like X11SSM-F, which is wrong and would confuse the BMC.
Test: Boot the machine via the BMC web interface and check that sensors
get read correctly by the IPMI firmware when the payload starts.
Tested successfully.
Change-Id: If344b2271bfc8d50b8b64847109818f96f2abbcb
Tested-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Diffstat (limited to 'src/mainboard')
3 files changed, 4 insertions, 1 deletions
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio.c b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio.c index 06d3bd43c3..00faa2e3f6 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio.c +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio.c @@ -50,7 +50,7 @@ static const struct pad_config gpio_table[] = { PAD_NC(GPP_B17, NONE), PAD_NC(GPP_B18, NONE), PAD_NC(GPP_B19, NONE), - PAD_CFG_GPO(GPP_B20, 1, PLTRST), + PAD_CFG_GPO(GPP_B20, 0, PLTRST), /* BMC POST_COMPLETE */ PAD_NC(GPP_B21, NONE), PAD_NC(GPP_B22, NONE), PAD_CFG_NF(GPP_B23, NONE, DEEP, NF2), diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio_early.c b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio_early.c index 3ea21e0321..e3c5c4d982 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio_early.c +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/gpio_early.c @@ -14,6 +14,7 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1), PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1), + PAD_CFG_GPO(GPP_B20, 0, PLTRST), /* BMC POST_COMPLETE */ }; void mainboard_configure_early_gpios(void) diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb index 093786cbd5..d7f5df8c8b 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb @@ -76,6 +76,8 @@ chip soc/intel/skylake end device pci 1f.0 on # LPC Interface chip drivers/ipmi + use pch_gpio as gpio_dev + register "post_complete_gpio" = "GPP_B20" # On cold boot it takes a while for the BMC to start the IPMI service register "wait_for_bmc" = "1" register "bmc_boot_timeout" = "60" |