summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorVinod Polimera <vpolimer@codeaurora.org>2020-03-03 12:13:26 +0530
committerJulius Werner <jwerner@chromium.org>2020-09-10 00:25:26 +0000
commit3b4c45efa264ab68512eeca0dc5b9d65283dd8bc (patch)
tree7c68903b26918ae228ef0bb0d0fa53ad23d8cfcc /src/mainboard
parentc4e0b0a31378ae164ae2b6988c9779d96b627e84 (diff)
sc7180: Add display hardware pipe line initialization
Add sc7180 display hardware pipeline programming support and invoke the display initialization from soc_init. Changes in V1: - added display init required check. - added edid read function using i2c communication. - added sn65dsi86 bridge driver to init bridge. - moved display initialization to mainboard file. Changes in V2: - moved diplay init sequence to mainboard file - moved edid read function to bridge driver. - calculated timing paramters using edid parameters. - removed command mode config code. - moved bridge driver to drivers/ti. - seperated out bridge and soc code with mainboard file as interface. Changes in V3: - add GPIO selection at runtime based on boardid. - add vbif register struct overlay. Changes in V4: - update gpio config for lazor board. Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/trogdor/board.h5
-rw-r--r--src/mainboard/google/trogdor/mainboard.c63
2 files changed, 66 insertions, 2 deletions
diff --git a/src/mainboard/google/trogdor/board.h b/src/mainboard/google/trogdor/board.h
index bd7222fefa..39661b5f21 100644
--- a/src/mainboard/google/trogdor/board.h
+++ b/src/mainboard/google/trogdor/board.h
@@ -13,6 +13,11 @@
#define GPIO_SD_CD_L GPIO(69)
#define GPIO_AMP_ENABLE GPIO(23)
+/* Display specific GPIOS */
+#define GPIO_BACKLIGHT_ENABLE GPIO(12)
+#define GPIO_EDP_BRIDGE_ENABLE (CONFIG(TROGDOR_REV0) ? GPIO(14) : GPIO(104))
+#define GPIO_EN_PP3300_DX_EDP (CONFIG(TROGDOR_REV0) ? GPIO(106) : GPIO(30))
+
void setup_chromeos_gpios(void);
#endif /* _COREBOOT_SRC_MAINBOARD_GOOGLE_TROGDOR_BOARD_H_ */
diff --git a/src/mainboard/google/trogdor/mainboard.c b/src/mainboard/google/trogdor/mainboard.c
index 349c3064c3..57f3a3ba0f 100644
--- a/src/mainboard/google/trogdor/mainboard.c
+++ b/src/mainboard/google/trogdor/mainboard.c
@@ -1,9 +1,21 @@
/* SPDX-License-Identifier: GPL-2.0-only */
+#include <bootmode.h>
+#include <delay.h>
#include <device/device.h>
+#include <device/i2c_simple.h>
+#include <drivers/ti/sn65dsi86bridge/sn65dsi86bridge.h>
+#include <soc/display/mipi_dsi.h>
+#include <soc/display/mdssreg.h>
#include <soc/qupv3_config.h>
+#include <soc/qupv3_i2c.h>
#include <soc/usb.h>
+#include "board.h"
+
+#define BRIDGE_BUS 0x2
+#define BRIDGE_CHIP 0x2d
+
static struct usb_board_data usb0_board_data = {
.pll_bias_control_2 = 0x22,
.imp_ctrl1 = 0x08,
@@ -20,7 +32,6 @@ static void setup_usb(void)
static void qi2s_configure_gpios(void)
{
-
gpio_configure(GPIO(49), GPIO49_FUNC_MI2S_1_SCK,
GPIO_NO_PULL, GPIO_8MA, GPIO_OUTPUT);
@@ -34,7 +45,6 @@ static void qi2s_configure_gpios(void)
static void load_qup_fw(void)
{
qupv3_se_fw_load_and_init(QUPV3_0_SE1, SE_PROTOCOL_SPI, MIXED); /* ESIM SPI */
- qupv3_se_fw_load_and_init(QUPV3_0_SE2, SE_PROTOCOL_I2C, MIXED); /* EDP Bridge I2C */
qupv3_se_fw_load_and_init(QUPV3_0_SE3, SE_PROTOCOL_UART, FIFO); /* BT UART */
qupv3_se_fw_load_and_init(QUPV3_0_SE4, SE_PROTOCOL_I2C, MIXED); /* Pen Detect I2C */
qupv3_se_fw_load_and_init(QUPV3_0_SE5, SE_PROTOCOL_I2C, MIXED); /* SAR I2C */
@@ -51,11 +61,60 @@ static void load_qup_fw(void)
qupv3_se_fw_load_and_init(QUPV3_1_SE5, SE_PROTOCOL_I2C, MIXED); /* Codec I2C */
}
+static void configure_display(void)
+{
+ printk(BIOS_INFO, "%s: Bridge gpio init\n", __func__);
+
+ /* Bridge Enable GPIO */
+ gpio_output(GPIO_EDP_BRIDGE_ENABLE, 1);
+
+ /* PP3300 EDP power supply */
+ gpio_output(GPIO_EN_PP3300_DX_EDP, 1);
+}
+
+static void display_init(struct edid *edid)
+{
+ uint32_t dsi_bpp = 24;
+ uint32_t lanes = 4;
+
+ if (mdss_dsi_config(edid, lanes, dsi_bpp))
+ return;
+
+ sn65dsi86_bridge_configure(BRIDGE_BUS, BRIDGE_CHIP, edid, lanes, dsi_bpp);
+ mdp_dsi_video_config(edid);
+ mdss_dsi_video_mode_config(edid, dsi_bpp);
+ mdp_dsi_video_on();
+}
+
+static void display_startup(void)
+{
+ static struct edid ed;
+ enum dp_pll_clk_src ref_clk = SN65_SEL_19MHZ;
+
+ i2c_init(QUPV3_0_SE2, I2C_SPEED_FAST); /* EDP Bridge I2C */
+ if (display_init_required()) {
+ configure_display();
+ mdelay(250); /* Delay for the panel to be up */
+ sn65dsi86_bridge_init(BRIDGE_BUS, BRIDGE_CHIP, ref_clk);
+ if (sn65dsi86_bridge_read_edid(BRIDGE_BUS, BRIDGE_CHIP, &ed) < 0)
+ return;
+
+ printk(BIOS_INFO, "display init!\n");
+
+ /* Configure backlight */
+ gpio_output(GPIO_BACKLIGHT_ENABLE, 1);
+ display_init(&ed);
+ set_vbe_mode_info_valid(&ed, (uintptr_t)0);
+ } else
+ printk(BIOS_INFO, "Skipping display init.\n");
+}
+
static void mainboard_init(struct device *dev)
{
setup_usb();
qi2s_configure_gpios();
load_qup_fw();
+ display_startup();
}
static void mainboard_enable(struct device *dev)