soc/amd: Fix generating SMBIOS Type 17

The converter was setting SMBIOS values when dimm_info expects SPD
values.

dmidecode now shows the following:
Memory Device
        Array Handle: 0x0000
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 8192 MB
        Form Factor: SODIMM
        Set: None
        Locator: Channel-0-DIMM-0
        Bank Locator: BANK 0
        Type: DDR4
        Type Detail: Synchronous
        Speed: 933 MT/s
        Manufacturer: Hynix/Hyundai
        Serial Number: 00000000
        Asset Tag: Not Specified
        Part Number: HMAA51S6AMR6N-UH
        Rank: 1
        Configured Clock Speed: 933 MT/s
        Minimum Voltage: Unknown
        Maximum Voltage: Unknown
        Configured Voltage: Unknown

Example debug output:
AGESA TYPE 17 DMI INFO:
  Handle: 1
  TotalWidth: 64
  DataWidth: 64
  MemorySize: 8192
  DeviceSet: 0
  Speed: 1200
  ManufacturerIdCode: 44416
  Attributes: 1
  ExtSize: 0
  ConfigSpeed: 933
  MemoryType: 0x1a
  FormFactor: 0xd
  DeviceLocator:   DIMM 0
  BankLocator:  CHANNEL A
  SerialNumber(8): ' 00000000'
  PartNumber(20): 'HMAA51S6AMR6N-UH    '
CBMEM_ID_MEMINFO:
  dimm_size: 8192
  ddr_type: 0x1a
  ddr_frequency: 933
  rank_per_dimm: 1
  channel_num: 0
  dimm_num: 0
  bank_locator: 0
  mod_id: 44416
  mod_type: 0x4
  bus_width: 3
  serial: 0x00000000
  module_part_number(18): 'HMAA51S6AMR6N-UH  '

The serial number we get from AGESA (at least on my
board) is always 00000000. I'm assuming this is because the SPD info is
compiled in.

`mosys memory spd print all` is still failing though. I will look into
that next.

BUG=b:65403853
BRANCH=dimm-info
TEST=Test output above

Change-Id: I076bc3f965f81a9374c8976da48c7fdce014dc0c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/25304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

0 files changed, 0 insertions, 0 deletions