summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorZheng Bao <zheng.bao@amd.com>2011-01-18 09:31:29 +0000
committerZheng Bao <Zheng.Bao@amd.com>2011-01-18 09:31:29 +0000
commit078efb5a6fed4fe059af63f3f7d9844c52841cf3 (patch)
treee991c4a8673d9467a2f303b1cc53ba960e935d83 /src/mainboard
parent10219012f29692c7860e505cf2d71004ba82c1f3 (diff)
remove the code which is not ready to release.
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/amd/bimini_fam10/Kconfig108
-rw-r--r--src/mainboard/amd/bimini_fam10/Makefile.inc7
-rw-r--r--src/mainboard/amd/bimini_fam10/acpi/cpstate.asl75
-rw-r--r--src/mainboard/amd/bimini_fam10/acpi/ide.asl244
-rw-r--r--src/mainboard/amd/bimini_fam10/acpi/routing.asl398
-rw-r--r--src/mainboard/amd/bimini_fam10/acpi/sata.asl149
-rw-r--r--src/mainboard/amd/bimini_fam10/acpi/usb.asl161
-rw-r--r--src/mainboard/amd/bimini_fam10/acpi_tables.c272
-rw-r--r--src/mainboard/amd/bimini_fam10/chip.h22
-rw-r--r--src/mainboard/amd/bimini_fam10/cmos.layout98
-rw-r--r--src/mainboard/amd/bimini_fam10/devicetree.cb108
-rw-r--r--src/mainboard/amd/bimini_fam10/dsdt.asl1824
-rw-r--r--src/mainboard/amd/bimini_fam10/fadt.c201
-rw-r--r--src/mainboard/amd/bimini_fam10/get_bus_conf.c147
-rw-r--r--src/mainboard/amd/bimini_fam10/irq_tables.c111
-rw-r--r--src/mainboard/amd/bimini_fam10/mainboard.c200
-rw-r--r--src/mainboard/amd/bimini_fam10/mb_sysconf.h43
-rw-r--r--src/mainboard/amd/bimini_fam10/mptable.c160
-rw-r--r--src/mainboard/amd/bimini_fam10/pmio.c53
-rw-r--r--src/mainboard/amd/bimini_fam10/pmio.h33
-rw-r--r--src/mainboard/amd/bimini_fam10/reset.c63
-rw-r--r--src/mainboard/amd/bimini_fam10/resourcemap.c278
-rw-r--r--src/mainboard/amd/bimini_fam10/romstage.c238
23 files changed, 0 insertions, 4993 deletions
diff --git a/src/mainboard/amd/bimini_fam10/Kconfig b/src/mainboard/amd/bimini_fam10/Kconfig
deleted file mode 100644
index 8d675e9fa5..0000000000
--- a/src/mainboard/amd/bimini_fam10/Kconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-if BOARD_AMD_BIMINI_FAM10
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select ARCH_X86
- select CPU_AMD_SOCKET_ASB2
- select DIMM_DDR3
- select DIMM_REGISTERED
- # TODO: Enable QRANK_DIMM_SUPPORT? Was commented in the Kconfig file,
- # but enabled in the romstage.c file.
- select QRANK_DIMM_SUPPORT
- select NORTHBRIDGE_AMD_AMDFAM10
- select SOUTHBRIDGE_AMD_RS780
- select SOUTHBRIDGE_AMD_CIMX_WRAPPER_SB800
- select SUPERIO_ITE_IT8718F
- select BOARD_HAS_FADT
- select HAVE_BUS_CONFIG
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select HAVE_MAINBOARD_RESOURCES
- select HAVE_HARD_RESET
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select LIFT_BSP_APIC_ID
- select SERIAL_CPU_INIT
- select AMDMCT
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_2048
- select RAMINIT_SYSINFO
- select ENABLE_APIC_EXT_ID
- select TINY_BOOTBLOCK
- select GFXUMA
- select HAVE_DEBUG_CAR
- select SET_FIDVID
-
-config MAINBOARD_DIR
- string
- default amd/bimini_fam10
-
-config APIC_ID_OFFSET
- hex
- default 0x0
-
-config MAINBOARD_PART_NUMBER
- string
- default "Bimini (Fam10)"
-
-config HW_MEM_HOLE_SIZEK
- hex
- default 0x100000
-
-config MAX_CPUS
- int
- default 8
-
-config MAX_PHYSICAL_CPUS
- int
- default 2
-
-config HW_MEM_HOLE_SIZE_AUTO_INC
- bool
- default n
-
-config MEM_TRAIN_SEQ
- int
- default 2
-
-config SB_HT_CHAIN_ON_BUS0
- int
- default 1
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x1
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0x0
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-config AMD_UCODE_PATCH_FILE
- string
- default "mc_patch_010000b6.h"
-
-config RAMTOP
- hex
- default 0x2000000
-
-config HEAP_SIZE
- hex
- default 0xc0000
-
-config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
- hex
- default 0x3060
-
-config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
- hex
- default 0x1022
-
-config RAMBASE
- hex
- default 0x200000
-
-endif #BOARD_AMD_BIMINI_FAM10
diff --git a/src/mainboard/amd/bimini_fam10/Makefile.inc b/src/mainboard/amd/bimini_fam10/Makefile.inc
deleted file mode 100644
index 3c0bc8201c..0000000000
--- a/src/mainboard/amd/bimini_fam10/Makefile.inc
+++ /dev/null
@@ -1,7 +0,0 @@
-#FIXME romstage have include test_rest.c
-#romstage-y += reset.c
-romstage-y += pmio.c
-
-ramstage-y += reset.c
-ramstage-y += pmio.c
-
diff --git a/src/mainboard/amd/bimini_fam10/acpi/cpstate.asl b/src/mainboard/amd/bimini_fam10/acpi/cpstate.asl
deleted file mode 100644
index 6a1b002474..0000000000
--- a/src/mainboard/amd/bimini_fam10/acpi/cpstate.asl
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* This file defines the processor and performance state capability
- * for each core in the system. It is included into the DSDT for each
- * core. It assumes that each core of the system has the same performance
- * characteristics.
-*/
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001)
- {
- Scope (\_PR) {
- Processor(CPU0,0,0x808,0x06) {
- #include "cpstate.asl"
- }
- Processor(CPU1,1,0x0,0x0) {
- #include "cpstate.asl"
- }
- Processor(CPU2,2,0x0,0x0) {
- #include "cpstate.asl"
- }
- Processor(CPU3,3,0x0,0x0) {
- #include "cpstate.asl"
- }
- }
-*/
- /* P-state support: The maximum number of P-states supported by the */
- /* CPUs we'll use is 6. */
- /* Get from AMI BIOS. */
- Name(_PSS, Package(){
- Package ()
- {
- 0x00000AF0,
- 0x0000BF81,
- 0x00000002,
- 0x00000002,
- 0x00000000,
- 0x00000000
- },
-
- Package ()
- {
- 0x00000578,
- 0x000076F2,
- 0x00000002,
- 0x00000002,
- 0x00000001,
- 0x00000001
- }
- })
-
- Name(_PCT, Package(){
- ResourceTemplate(){Register(FFixedHW, 0, 0, 0)},
- ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}
- })
-
- Method(_PPC, 0){
- Return(0)
- }
diff --git a/src/mainboard/amd/bimini_fam10/acpi/ide.asl b/src/mainboard/amd/bimini_fam10/acpi/ide.asl
deleted file mode 100644
index 6ea2b09f2c..0000000000
--- a/src/mainboard/amd/bimini_fam10/acpi/ide.asl
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "ide.asl"
- }
- }
-}
-*/
-
-/* Some timing tables */
-Name(UDTT, Package(){ /* Udma timing table */
- 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
-})
-
-Name(MDTT, Package(){ /* MWDma timing table */
- 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(POTT, Package(){ /* Pio timing table */
- 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
-})
-
-/* Some timing register value tables */
-Name(MDRT, Package(){ /* MWDma timing register table */
- 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
-})
-
-Name(PORT, Package(){
- 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
-})
-
-OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
- Field(ICRG, AnyAcc, NoLock, Preserve)
-{
- PPTS, 8, /* Primary PIO Slave Timing */
- PPTM, 8, /* Primary PIO Master Timing */
- OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
- PMTM, 8, /* Primary MWDMA Master Timing */
- OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
- OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
- PPSM, 4, /* Primary PIO slave Mode */
- OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
- OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
- PDSM, 4, /* Primary UltraDMA Mode */
-}
-
-Method(GTTM, 1) /* get total time*/
-{
- Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
- Increment(Local0)
- Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
- Increment(Local1)
- Return(Multiply(30, Add(Local0, Local1)))
-}
-
-Device(PRID)
-{
- Name (_ADR, Zero)
- Method(_GTM, 0)
- {
- NAME(OTBF, Buffer(20) { /* out buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
- CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
-
- /* Just return if the channel is disabled */
- If(And(PPCR, 0x01)) { /* primary PIO control */
- Return(OTBF)
- }
-
- /* Always tell them independent timing available and IOChannelReady used on both drives */
- Or(BFFG, 0x1A, BFFG)
-
- Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
- Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
-
- If(And(PDCR, 0x01)) { /* It's under UDMA mode */
- Or(BFFG, 0x01, BFFG)
- Store(DerefOf(Index(UDTT, PDMM)), DSD0)
- }
- Else {
- Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
- }
-
- If(And(PDCR, 0x02)) { /* It's under UDMA mode */
- Or(BFFG, 0x04, BFFG)
- Store(DerefOf(Index(UDTT, PDSM)), DSD1)
- }
- Else {
- Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
- }
-
- Return(OTBF) /* out buffer */
- } /* End Method(_GTM) */
-
- Method(_STM, 3, NotSerialized)
- {
- NAME(INBF, Buffer(20) { /* in buffer */
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
- })
-
- CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
- CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
- CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
- CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
- CreateDwordField(INBF, 16, BFFG) /*buffer flag */
-
- Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
- Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
- Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
- Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
-
- Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
- Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
-
- If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDMM,)
- Or(PDCR, 0x01, PDCR)
- }
- Else {
- If(LNotEqual(DSD0, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTM)
- }
- }
-
- If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
- Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Divide(Local0, 7, PDSM,)
- Or(PDCR, 0x02, PDCR)
- }
- Else {
- If(LNotEqual(DSD1, 0xFFFFFFFF)) {
- Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
- Store(DerefOf(Index(MDRT, Local0)), PMTS)
- }
- }
- /* Return(INBF) */
- } /*End Method(_STM) */
- Device(MST)
- {
- Name(_ADR, 0)
- Method(_GTF) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xA0, CMDA)
- Store(0xA0, CMDB)
- Store(0xA0, CMDC)
-
- Or(PPMM, 0x08, POMD)
-
- If(And(PDCR, 0x01)) {
- Or(PDMM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTM),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(MST) */
-
- Device(SLAV)
- {
- Name(_ADR, 1)
- Method(_GTF) {
- Name(CMBF, Buffer(21) {
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
- })
- CreateByteField(CMBF, 1, POMD)
- CreateByteField(CMBF, 8, DMMD)
- CreateByteField(CMBF, 5, CMDA)
- CreateByteField(CMBF, 12, CMDB)
- CreateByteField(CMBF, 19, CMDC)
-
- Store(0xB0, CMDA)
- Store(0xB0, CMDB)
- Store(0xB0, CMDC)
-
- Or(PPSM, 0x08, POMD)
-
- If(And(PDCR, 0x02)) {
- Or(PDSM, 0x40, DMMD)
- }
- Else {
- Store(Match
- (MDTT, MLE, GTTM(PMTS),
- MTR, 0, 0), Local0)
- If(LLess(Local0, 3)) {
- Or(0x20, Local0, DMMD)
- }
- }
- Return(CMBF)
- }
- } /* End Device(SLAV) */
-}
diff --git a/src/mainboard/amd/bimini_fam10/acpi/routing.asl b/src/mainboard/amd/bimini_fam10/acpi/routing.asl
deleted file mode 100644
index 641b168e9b..0000000000
--- a/src/mainboard/amd/bimini_fam10/acpi/routing.asl
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
- )
- {
- #include "routing.asl"
- }
-*/
-
-/* Routing is in System Bus scope */
-Scope(\_SB) {
- Name(PR0, Package(){
- /* NB devices */
- /* Bus 0, Dev 0 - RS780 Host Controller */
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, INTC, 0 },
- Package(){0x0002FFFF, 1, INTD, 0 },
- Package(){0x0002FFFF, 2, INTA, 0 },
- Package(){0x0002FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, INTA, 0 },
- Package(){0x0004FFFF, 1, INTB, 0 },
- Package(){0x0004FFFF, 2, INTC, 0 },
- Package(){0x0004FFFF, 3, INTD, 0 },
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- /* Package(){0x0005FFFF, 0, INTB, 0 }, */
- /* Package(){0x0005FFFF, 1, INTC, 0 }, */
- /* Package(){0x0005FFFF, 2, INTD, 0 }, */
- /* Package(){0x0005FFFF, 3, INTA, 0 }, */
- /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
- Package(){0x0006FFFF, 0, INTC, 0 },
- Package(){0x0006FFFF, 1, INTD, 0 },
- Package(){0x0006FFFF, 2, INTA, 0 },
- Package(){0x0006FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
- Package(){0x0007FFFF, 0, INTD, 0 },
- Package(){0x0007FFFF, 1, INTA, 0 },
- Package(){0x0007FFFF, 2, INTB, 0 },
- Package(){0x0007FFFF, 3, INTC, 0 },
-
- Package(){0x0009FFFF, 0, INTB, 0 },
- Package(){0x0009FFFF, 1, INTC, 0 },
- Package(){0x0009FFFF, 2, INTD, 0 },
- Package(){0x0009FFFF, 3, INTA, 0 },
-
- Package(){0x000AFFFF, 0, INTC, 0 },
- Package(){0x000AFFFF, 1, INTD, 0 },
- Package(){0x000AFFFF, 2, INTA, 0 },
- Package(){0x000AFFFF, 3, INTB, 0 },
-
- Package(){0x000BFFFF, 0, INTD, 0 },
- Package(){0x000BFFFF, 1, INTA, 0 },
- Package(){0x000BFFFF, 2, INTB, 0 },
- Package(){0x000BFFFF, 3, INTC, 0 },
-
- Package(){0x000CFFFF, 0, INTA, 0 },
- Package(){0x000CFFFF, 1, INTB, 0 },
- Package(){0x000CFFFF, 2, INTC, 0 },
- Package(){0x000CFFFF, 3, INTD, 0 },
-
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
- /* SB devices */
- /* Bus 0, Dev 17 - SATA controller #2 */
- /* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0011FFFF, 0, INTD, 0 },
-
- /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
- * EHCI, dev 18, 19 func 2 */
- Package(){0x0012FFFF, 0, INTC, 0 },
- Package(){0x0012FFFF, 1, INTB, 0 },
-
- Package(){0x0013FFFF, 0, INTC, 0 },
- Package(){0x0013FFFF, 1, INTB, 0 },
-
- Package(){0x0016FFFF, 0, INTC, 0 },
- Package(){0x0016FFFF, 1, INTB, 0 },
-
- /* Package(){0x0014FFFF, 1, INTA, 0 }, */
-
- /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
- Package(){0x0014FFFF, 0, INTA, 0 },
- Package(){0x0014FFFF, 1, INTB, 0 },
- Package(){0x0014FFFF, 2, INTC, 0 },
- Package(){0x0014FFFF, 3, INTD, 0 },
-
- Package(){0x0015FFFF, 0, INTA, 0 },
- Package(){0x0015FFFF, 1, INTB, 0 },
- Package(){0x0015FFFF, 2, INTC, 0 },
- Package(){0x0015FFFF, 3, INTD, 0 },
- })
-
- Name(APR0, Package(){
- /* NB devices in APIC mode */
- /* Bus 0, Dev 0 - RS780 Host Controller */
-
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- Package(){0x0001FFFF, 0, 0, 18 },
- package(){0x0001FFFF, 1, 0, 19 },
-
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, 0, 18 },
- /* Package(){0x0002FFFF, 1, 0, 19 }, */
- /* Package(){0x0002FFFF, 2, 0, 16 }, */
- /* Package(){0x0002FFFF, 3, 0, 17 }, */
-
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- Package(){0x0003FFFF, 0, 0, 19 },
-
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, 0, 16 },
- /* Package(){0x0004FFFF, 1, 0, 17 }, */
- /* Package(){0x0004FFFF, 2, 0, 18 }, */
- /* Package(){0x0004FFFF, 3, 0, 19 }, */
-
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- /* Package(){0x0005FFFF, 0, 0, 17 }, */
- /* Package(){0x0005FFFF, 1, 0, 18 }, */
- /* Package(){0x0005FFFF, 2, 0, 19 }, */
- /* Package(){0x0005FFFF, 3, 0, 16 }, */
-
- /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
- /* Package(){0x0006FFFF, 0, 0, 18 }, */
- /* Package(){0x0006FFFF, 1, 0, 19 }, */
- /* Package(){0x0006FFFF, 2, 0, 16 }, */
- /* Package(){0x0006FFFF, 3, 0, 17 }, */
-
- /* Bus 0, Dev 7 - PCIe Bridge for network card */
- /* Package(){0x0007FFFF, 0, 0, 19 }, */
- /* Package(){0x0007FFFF, 1, 0, 16 }, */
- /* Package(){0x0007FFFF, 2, 0, 17 }, */
- /* Package(){0x0007FFFF, 3, 0, 18 }, */
-
- /* Bus 0, Dev 9 - PCIe Bridge for network card */
- Package(){0x0009FFFF, 0, 0, 17 },
- /* Package(){0x0009FFFF, 1, 0, 16 }, */
- /* Package(){0x0009FFFF, 2, 0, 17 }, */
- /* Package(){0x0009FFFF, 3, 0, 18 }, */
- /* Bus 0, Dev A - PCIe Bridge for network card */
- Package(){0x000AFFFF, 0, 0, 18 },
- /* Package(){0x000AFFFF, 1, 0, 16 }, */
- /* Package(){0x000AFFFF, 2, 0, 17 }, */
- /* Package(){0x000AFFFF, 3, 0, 18 }, */
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
- /* SB devices in APIC mode */
- /* Bus 0, Dev 17 - SATA controller #2 */
- /* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0011FFFF, 0, 0, 19 },
-
- /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
- * EHCI, dev 18, 19 func 2 */
- Package(){0x0012FFFF, 0, 0, 18 },
- Package(){0x0012FFFF, 1, 0, 17 },
- /* Package(){0x0012FFFF, 2, 0, 18 }, */
-
- Package(){0x0013FFFF, 0, 0, 18 },
- Package(){0x0013FFFF, 1, 0, 17 },
- /* Package(){0x0013FFFF, 2, 0, 16 }, */
-
- /* Package(){0x00140000, 0, 0, 16 }, */
-
- Package(){0x0016FFFF, 0, 0, 18 },
- Package(){0x0016FFFF, 1, 0, 17 },
-
- /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
- Package(){0x0014FFFF, 0, 0, 16 },
- Package(){0x0014FFFF, 1, 0, 17 },
- Package(){0x0014FFFF, 2, 0, 18 },
- Package(){0x0014FFFF, 3, 0, 19 },
- /* Package(){0x00140004, 2, 0, 18 }, */
- /* Package(){0x00140004, 3, 0, 19 }, */
- /* Package(){0x00140005, 1, 0, 17 }, */
- /* Package(){0x00140006, 1, 0, 17 }, */
-
- /* TODO: pcie */
- Package(){0x0015FFFF, 0, 0, 16 },
- Package(){0x0015FFFF, 1, 0, 17 },
- Package(){0x0015FFFF, 2, 0, 18 },
- Package(){0x0015FFFF, 3, 0, 19 },
- })
-
- Name(PR1, Package(){
- /* Internal graphics - RS780 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, INTA, 0 },
- Package(){0x0005FFFF, 1, INTB, 0 },
- Package(){0x0005FFFF, 2, INTC, 0 },
- Package(){0x0005FFFF, 3, INTD, 0 },
- })
- Name(APR1, Package(){
- /* Internal graphics - RS780 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, 0, 18 },
- Package(){0x0005FFFF, 1, 0, 19 },
- /* Package(){0x0005FFFF, 2, 0, 20 }, */
- /* Package(){0x0005FFFF, 3, 0, 17 }, */
- })
-
- Name(PS2, Package(){
- /* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APS2, Package(){
- /* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
- })
- Name(APS4, Package(){
- /* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, 0, 16 },
- Package(){0x0000FFFF, 1, 0, 17 },
- Package(){0x0000FFFF, 2, 0, 18 },
- Package(){0x0000FFFF, 3, 0, 19 },
- })
-
- Name(PS5, Package(){
- /* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
- })
- Name(APS5, Package(){
- /* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PS6, Package(){
- /* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APS6, Package(){
- /* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, 0, 19 },
- Package(){0x0000FFFF, 1, 0, 16 },
- Package(){0x0000FFFF, 2, 0, 17 },
- Package(){0x0000FFFF, 3, 0, 18 },
- })
-
- Name(PS9, Package(){
- /* PCIe slot - Hooked to PCIe slot 9 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APS9, Package(){
- /* PCIe slot - Hooked to PCIe slot 9 */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PSa, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APSa, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PE0, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
- })
- Name(APE0, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 16 },
- Package(){0x0000FFFF, 1, 0, 17 },
- Package(){0x0000FFFF, 2, 0, 18 },
- Package(){0x0000FFFF, 3, 0, 19 },
- })
-
- Name(PE1, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
- })
- Name(APE1, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 17 },
- Package(){0x0000FFFF, 1, 0, 18 },
- Package(){0x0000FFFF, 2, 0, 19 },
- Package(){0x0000FFFF, 3, 0, 16 },
- })
-
- Name(PE2, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
- })
- Name(APE2, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 18 },
- Package(){0x0000FFFF, 1, 0, 19 },
- Package(){0x0000FFFF, 2, 0, 16 },
- Package(){0x0000FFFF, 3, 0, 17 },
- })
-
- Name(PE3, Package(){
- /* PCIe slot - Hooked to PCIe slot 10 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
- })
- Name(APE3, Package(){
- /* PCIe slot - Hooked to PCIe */
- Package(){0x0000FFFF, 0, 0, 19 },
- Package(){0x0000FFFF, 1, 0, 16 },
- Package(){0x0000FFFF, 2, 0, 17 },
- Package(){0x0000FFFF, 3, 0, 18 },
- })
-
- Name(PCIB, Package(){
- /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
- Package(){0x0005FFFF, 0, 0, 0x14 },
- Package(){0x0005FFFF, 1, 0, 0x15 },
- Package(){0x0005FFFF, 2, 0, 0x16 },
- Package(){0x0005FFFF, 3, 0, 0x17 },
- Package(){0x0006FFFF, 0, 0, 0x15 },
- Package(){0x0006FFFF, 1, 0, 0x16 },
- Package(){0x0006FFFF, 2, 0, 0x17 },
- Package(){0x0006FFFF, 3, 0, 0x14 },
- Package(){0x0007FFFF, 0, 0, 0x16 },
- Package(){0x0007FFFF, 1, 0, 0x17 },
- Package(){0x0007FFFF, 2, 0, 0x14 },
- Package(){0x0007FFFF, 3, 0, 0x15 },
- })
-}
diff --git a/src/mainboard/amd/bimini_fam10/acpi/sata.asl b/src/mainboard/amd/bimini_fam10/acpi/sata.asl
deleted file mode 100644
index b5e6fc5665..0000000000
--- a/src/mainboard/amd/bimini_fam10/acpi/sata.asl
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* simple name description */
-
-/*
-Scope (_SB) {
- Device(PCI0) {
- Device(SATA) {
- Name(_ADR, 0x00110000)
- #include "sata.asl"
- }
- }
-}
-*/
-
-Name(STTM, Buffer(20) {
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
- 0x1f, 0x00, 0x00, 0x00
-})
-
-/* Start by clearing the PhyRdyChg bits */
-Method(_INI) {
- \_GPE._L1F()
-}
-
-Device(PMRY)
-{
- Name(_ADR, 0)
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(PMST) {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P0IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- }/* end of PMST */
-
- Device(PSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P1IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of PSLA */
-} /* end of PMRY */
-
-
-Device(SEDY)
-{
- Name(_ADR, 1) /* IDE Scondary Channel */
- Method(_GTM, 0x0, NotSerialized) {
- Return(STTM)
- }
- Method(_STM, 0x3, NotSerialized) {}
-
- Device(SMST)
- {
- Name(_ADR, 0)
- Method(_STA,0) {
- if (LGreater(P2IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SMST */
-
- Device(SSLA)
- {
- Name(_ADR, 1)
- Method(_STA,0) {
- if (LGreater(P3IS,0)) {
- return (0x0F) /* sata is visible */
- }
- else {
- return (0x00) /* sata is missing */
- }
- }
- } /* end of SSLA */
-} /* end of SEDY */
-
-/* SATA Hot Plug Support */
-Scope(\_GPE) {
- Method(_L1F,0x0,NotSerialized) {
- if (\_SB.P0PR) {
- if (LGreater(\_SB.P0IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P0PR)
- }
-
- if (\_SB.P1PR) {
- if (LGreater(\_SB.P1IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P1PR)
- }
-
- if (\_SB.P2PR) {
- if (LGreater(\_SB.P2IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P2PR)
- }
-
- if (\_SB.P3PR) {
- if (LGreater(\_SB.P3IS,0)) {
- sleep(32)
- }
- Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
- store(one, \_SB.P3PR)
- }
- }
-}
diff --git a/src/mainboard/amd/bimini_fam10/acpi/usb.asl b/src/mainboard/amd/bimini_fam10/acpi/usb.asl
deleted file mode 100644
index 203e0ad25a..0000000000
--- a/src/mainboard/amd/bimini_fam10/acpi/usb.asl
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* simple name description */
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
- )
- {
- #include "usb.asl"
- }
-*/
-Method(UCOC, 0) {
- Sleep(20)
- Store(0x13,CMTI)
- Store(0,GPSL)
-}
-
-/* USB Port 0 overcurrent uses Gpm 0 */
-If(LLessEqual(UOM0,9)) {
- Scope (\_GPE) {
- Method (_L13) {
- UCOC()
- if(LEqual(GPB0,PLC0)) {
- Not(PLC0,PLC0)
- Store(PLC0, \_SB.PT0D)
- }
- }
- }
-}
-
-/* USB Port 1 overcurrent uses Gpm 1 */
-If (LLessEqual(UOM1,9)) {
- Scope (\_GPE) {
- Method (_L14) {
- UCOC()
- if (LEqual(GPB1,PLC1)) {
- Not(PLC1,PLC1)
- Store(PLC1, \_SB.PT1D)
- }
- }
- }
-}
-
-/* USB Port 2 overcurrent uses Gpm 2 */
-If (LLessEqual(UOM2,9)) {
- Scope (\_GPE) {
- Method (_L15) {
- UCOC()
- if (LEqual(GPB2,PLC2)) {
- Not(PLC2,PLC2)
- Store(PLC2, \_SB.PT2D)
- }
- }
- }
-}
-
-/* USB Port 3 overcurrent uses Gpm 3 */
-If (LLessEqual(UOM3,9)) {
- Scope (\_GPE) {
- Method (_L16) {
- UCOC()
- if (LEqual(GPB3,PLC3)) {
- Not(PLC3,PLC3)
- Store(PLC3, \_SB.PT3D)
- }
- }
- }
-}
-
-/* USB Port 4 overcurrent uses Gpm 4 */
-If (LLessEqual(UOM4,9)) {
- Scope (\_GPE) {
- Method (_L19) {
- UCOC()
- if (LEqual(GPB4,PLC4)) {
- Not(PLC4,PLC4)
- Store(PLC4, \_SB.PT4D)
- }
- }
- }
-}
-
-/* USB Port 5 overcurrent uses Gpm 5 */
-If (LLessEqual(UOM5,9)) {
- Scope (\_GPE) {
- Method (_L1A) {
- UCOC()
- if (LEqual(GPB5,PLC5)) {
- Not(PLC5,PLC5)
- Store(PLC5, \_SB.PT5D)
- }
- }
- }
-}
-
-/* USB Port 6 overcurrent uses Gpm 6 */
-If (LLessEqual(UOM6,9)) {
- Scope (\_GPE) {
- /* Method (_L1C) { */
- Method (_L06) {
- UCOC()
- if (LEqual(GPB6,PLC6)) {
- Not(PLC6,PLC6)
- Store(PLC6, \_SB.PT6D)
- }
- }
- }
-}
-
-/* USB Port 7 overcurrent uses Gpm 7 */
-If (LLessEqual(UOM7,9)) {
- Scope (\_GPE) {
- /* Method (_L1D) { */
- Method (_L07) {
- UCOC()
- if (LEqual(GPB7,PLC7)) {
- Not(PLC7,PLC7)
- Store(PLC7, \_SB.PT7D)
- }
- }
- }
-}
-
-/* USB Port 8 overcurrent uses Gpm 8 */
-If (LLessEqual(UOM8,9)) {
- Scope (\_GPE) {
- Method (_L17) {
- if (LEqual(G8IS,PLC8)) {
- Not(PLC8,PLC8)
- Store(PLC8, \_SB.PT8D)
- }
- }
- }
-}
-
-/* USB Port 9 overcurrent uses Gpm 9 */
-If (LLessEqual(UOM9,9)) {
- Scope (\_GPE) {
- Method (_L0E) {
- if (LEqual(G9IS,0)) {
- Store(1,\_SB.PT9D)
- }
- }
- }
-}
diff --git a/src/mainboard/amd/bimini_fam10/acpi_tables.c b/src/mainboard/amd/bimini_fam10/acpi_tables.c
deleted file mode 100644
index a5422ffd6c..0000000000
--- a/src/mainboard/amd/bimini_fam10/acpi_tables.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/mtrr.h>
-#include <cpu/amd/amdfam10_sysconf.h>
-
-#include "mb_sysconf.h"
-
-#define DUMP_ACPI_TABLES 0
-
-#if DUMP_ACPI_TABLES == 1
-static void dump_mem(u32 start, u32 end)
-{
-
- u32 i;
- print_debug("dump_mem:");
- for (i = start; i < end; i++) {
- if ((i & 0xf) == 0) {
- printk(BIOS_DEBUG, "\n%08x:", i);
- }
- printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
- }
- print_debug("\n");
-}
-#endif
-
-extern const unsigned char AmlCode[];
-extern const unsigned char AmlCode_ssdt[];
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-extern const unsigned char AmlCode_ssdt2[];
-extern const unsigned char AmlCode_ssdt3[];
-extern const unsigned char AmlCode_ssdt4[];
-extern const unsigned char AmlCode_ssdt5[];
-#endif
-
-unsigned long acpi_fill_mcfg(unsigned long current)
-{
- /* Just a dummy */
- return current;
-}
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write SB800 IOAPIC, only one */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
- IO_APIC_ADDR, 0);
-
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 0);
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xF);
- /* 0: mean bus 0--->ISA */
- /* 0: PIC 0 */
- /* 2: APIC 2 */
- /* 5 mean: 0101 --> Edige-triggered, Active high */
-
- /* create all subtables for processors */
- /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
- /* 1: LINT1 connect to NMI */
-
- return current;
-}
-
-unsigned long write_acpi_tables(unsigned long start)
-{
- unsigned long current;
- acpi_rsdp_t *rsdp;
- acpi_rsdt_t *rsdt;
- acpi_hpet_t *hpet;
- acpi_madt_t *madt;
- acpi_srat_t *srat;
- acpi_slit_t *slit;
- acpi_fadt_t *fadt;
- acpi_facs_t *facs;
- acpi_header_t *dsdt;
- acpi_header_t *ssdt;
-#if CONFIG_ACPI_SSDTX_NUM >= 1
- acpi_header_t *ssdtx;
- void *p;
- int i;
-#endif
-
- get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
-
- /* Align ACPI tables to 16 bytes */
- start = (start + 0x0f) & -0x10;
- current = start;
-
- printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
-
- /* We need at least an RSDP and an RSDT Table */
- rsdp = (acpi_rsdp_t *) current;
- current += sizeof(acpi_rsdp_t);
- rsdt = (acpi_rsdt_t *) current;
- current += sizeof(acpi_rsdt_t);
-
- /* clear all table memory */
- memset((void *)start, 0, current - start);
-
- acpi_write_rsdp(rsdp, rsdt, NULL);
- acpi_write_rsdt(rsdt);
-
- /*
- * We explicitly add these tables later on:
- */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current);
- hpet = (acpi_hpet_t *) current;
- current += sizeof(acpi_hpet_t);
- acpi_create_hpet(hpet);
- acpi_add_table(rsdp, hpet);
-
- /* If we want to use HPET Timers Linux wants an MADT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current);
- madt = (acpi_madt_t *) current;
- acpi_create_madt(madt);
- current += madt->header.length;
- acpi_add_table(rsdp, madt);
-
- /* SRAT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
- srat = (acpi_srat_t *) current;
- acpi_create_srat(srat);
- current += srat->header.length;
- acpi_add_table(rsdp, srat);
-
- /* SLIT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
- slit = (acpi_slit_t *) current;
- acpi_create_slit(slit);
- current += slit->header.length;
- acpi_add_table(rsdp, slit);
-
- /* SSDT */
- current = ( current + 0x0f) & -0x10;
- printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
- ssdt = (acpi_header_t *)current;
- memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
- current += ssdt->length;
- memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
- //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
- update_ssdt((void*)ssdt);
- /* recalculate checksum */
- ssdt->checksum = 0;
- ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
- acpi_add_table(rsdp,ssdt);
-
- printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
- current = acpi_add_ssdt_pstates(rsdp, current);
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-
- /* same htio, but different position? We may have to copy,
- change HCIN, and recalculate the checknum and add_table */
-
- for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink
- if((sysconf.pci1234[i] & 1) != 1 ) continue;
- u8 c;
- if (i < 7) {
- c = (u8) ('4' + i - 1);
- } else {
- c = (u8) ('A' + i - 1 - 6);
- }
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
- ssdtx = (acpi_header_t *)current;
- switch (sysconf.hcid[i]) {
- case 1:
- p = &AmlCode_ssdt2;
- break;
- case 2:
- p = &AmlCode_ssdt3;
- break;
- case 3: /* 8131 */
- p = &AmlCode_ssdt4;
- break;
- default:
- /* HTX no io apic */
- p = &AmlCode_ssdt5;
- break;
- }
- memcpy(ssdtx, p, sizeof(acpi_header_t));
- current += ssdtx->length;
- memcpy(ssdtx, p, ssdtx->length);
- update_ssdtx((void *)ssdtx, i);
- ssdtx->checksum = 0;
- ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
- acpi_add_table(rsdp, ssdtx);
- }
-#endif
-
- /* DSDT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current);
- dsdt = (acpi_header_t *)current; // it will used by fadt
- memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
- current += dsdt->length;
- memcpy(dsdt, &AmlCode, dsdt->length);
- printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
-
- /* FACS */ // it needs 64 bit alignment
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
- facs = (acpi_facs_t *) current; // it will be used by fadt
- current += sizeof(acpi_facs_t);
- acpi_create_facs(facs);
-
- /* FDAT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current);
- fadt = (acpi_fadt_t *) current;
- current += sizeof(acpi_fadt_t);
-
- acpi_create_fadt(fadt, facs, dsdt);
- acpi_add_table(rsdp, fadt);
-
-#if DUMP_ACPI_TABLES == 1
- printk(BIOS_DEBUG, "rsdp\n");
- dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
-
- printk(BIOS_DEBUG, "rsdt\n");
- dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
-
- printk(BIOS_DEBUG, "madt\n");
- dump_mem(madt, ((void *)madt) + madt->header.length);
-
- printk(BIOS_DEBUG, "srat\n");
- dump_mem(srat, ((void *)srat) + srat->header.length);
-
- printk(BIOS_DEBUG, "slit\n");
- dump_mem(slit, ((void *)slit) + slit->header.length);
-
- printk(BIOS_DEBUG, "ssdt\n");
- dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
-
- printk(BIOS_DEBUG, "fadt\n");
- dump_mem(fadt, ((void *)fadt) + fadt->header.length);
-#endif
-
- printk(BIOS_INFO, "ACPI: done.\n");
- return current;
-}
diff --git a/src/mainboard/amd/bimini_fam10/chip.h b/src/mainboard/amd/bimini_fam10/chip.h
deleted file mode 100644
index 20135163b8..0000000000
--- a/src/mainboard/amd/bimini_fam10/chip.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-extern struct chip_operations mainboard_ops;
-
-struct mainboard_config {};
diff --git a/src/mainboard/amd/bimini_fam10/cmos.layout b/src/mainboard/amd/bimini_fam10/cmos.layout
deleted file mode 100644
index 53fdef5b0a..0000000000
--- a/src/mainboard/amd/bimini_fam10/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/amd/bimini_fam10/devicetree.cb b/src/mainboard/amd/bimini_fam10/devicetree.cb
deleted file mode 100644
index dc611a6051..0000000000
--- a/src/mainboard/amd/bimini_fam10/devicetree.cb
+++ /dev/null
@@ -1,108 +0,0 @@
- # sample config for amd/bimini_fam10
-chip northbridge/amd/amdfam10/root_complex
- device lapic_cluster 0 on
- chip cpu/amd/socket_ASB2 #L1 and DDR3
- device lapic 0 on end
- end
- end
- device pci_domain 0 on
- chip northbridge/amd/amdfam10
- device pci 18.0 on # northbridge
- chip southbridge/amd/rs780
- device pci 0.0 on end # HT 0x9600
- device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
- device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603
- device pci 3.0 off end # PCIE P2P bridge 0x960b
- device pci 4.0 on end # PCIE P2P bridge 0x9604
- device pci 5.0 on end # PCIE P2P bridge 0x9605
- device pci 6.0 on end # PCIE P2P bridge 0x9606
- device pci 7.0 on end # PCIE P2P bridge 0x9607
- device pci 8.0 off end # NB/SB Link P2P bridge
- device pci 9.0 on end #
- device pci a.0 off end #
- register "gppsb_configuration" = "4" # Configuration E
- register "gpp_configuration" = "2" # Configuration C
- register "port_enable" = "0x6fc"
- register "gfx_dev2_dev3" = "1"
- register "gfx_dual_slot" = "0"
- register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "0"
- register "gfx_compliance" = "0"
- register "gfx_reconfiguration" = "1"
- register "gfx_link_width" = "0"
- end
- chip southbridge/amd/cimx_wrapper/sb800 # it is under NB/SB Link, but on the same pci bus
- device pci 11.0 on end # SATA
- device pci 12.0 on end # USB
- device pci 12.2 on end # USB
- device pci 13.0 on end # USB
- device pci 13.2 on end # USB
- device pci 14.0 on # SM
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x439c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on end # LPC 0x439d
- device pci 14.4 off end # PCI 0x4384 # PCI-b conflict with GPIO.
- device pci 14.5 on end # USB 2
- device pci 14.6 on end # Gec
- device pci 15.0 on end # PCIe 0
- device pci 15.1 on end # PCIe 1
- device pci 15.2 on end # PCIe 2
- device pci 15.3 on end # PCIe 3
- device pci 16.0 on end # USB
- device pci 16.2 on end # USB
- register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
- register "gpp_configuration" = "4"
- end #southbridge/amd/cimx_wrapper/sb800
- end # device pci 18.0
-
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- end
- end #pci_domain
- #for node 32 to node 63
-# device pci_domain 0 on
-# chip northbridge/amd/amdfam10
-# device pci 00.0 on end# northbridge
-# device pci 00.0 on end
-# device pci 00.0 on end
-# device pci 00.0 on end
-# device pci 00.1 on end
-# device pci 00.2 on end
-# device pci 00.3 on end
-# device pci 00.4 on end
-# device pci 00.5 on end
-# end
-# end #pci_domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 on end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# device pnp 0.8 off end # hard reset
-# device pnp 0.9 off end # mcp55
-# device pnp 0.a on end # GH ext table
-# end
-
-end
diff --git a/src/mainboard/amd/bimini_fam10/dsdt.asl b/src/mainboard/amd/bimini_fam10/dsdt.asl
deleted file mode 100644
index 3ff6dabf88..0000000000
--- a/src/mainboard/amd/bimini_fam10/dsdt.asl
+++ /dev/null
@@ -1,1824 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* DefinitionBlock Statement */
-DefinitionBlock (
- "DSDT.AML", /* Output filename */
- "DSDT", /* Signature */
- 0x02, /* DSDT Revision, needs to be 2 for 64bit */
- "AMD ", /* OEMID */
- "BIMINI ", /* TABLE ID */
- 0x00010001 /* OEM Revision */
- )
-{ /* Start of ASL file */
- /* #include "../../../arch/x86/acpi/debug.asl" */ /* Include global debug methods if needed */
-
- /* Data to be patched by the BIOS during POST */
- /* FIXME the patching is not done yet! */
- /* Memory related values */
- Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
- Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
- Name(PBLN, 0x0) /* Length of BIOS area */
-
- Name(PCBA, 0xE0000000) /* Base address of PCIe config space */
- Name(HPBA, 0xFED00000) /* Base address of HPET table */
-
- Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
-
- /* USB overcurrent mapping pins. */
- Name(UOM0, 0)
- Name(UOM1, 2)
- Name(UOM2, 0)
- Name(UOM3, 7)
- Name(UOM4, 2)
- Name(UOM5, 2)
- Name(UOM6, 6)
- Name(UOM7, 2)
- Name(UOM8, 6)
- Name(UOM9, 6)
-
- /* Some global data */
- Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
- Name(OSV, Ones) /* Assume nothing */
- Name(PMOD, One) /* Assume APIC */
-
- /*
- * Processor Object
- *
- */
- Scope (\_PR) { /* define processor scope */
- Processor(
- CPU0, /* name space name */
- 0, /* Unique number for this processor */
- 0x808, /* PBLK system I/O address !hardcoded! */
- 0x06 /* PBLKLEN for boot processor */
- ) {
- #include "acpi/cpstate.asl"
- }
-
- Processor(
- CPU1, /* name space name */
- 1, /* Unique number for this processor */
- 0x0000, /* PBLK system I/O address !hardcoded! */
- 0x00 /* PBLKLEN for boot processor */
- ) {
- #include "acpi/cpstate.asl"
- }
-
- Processor(
- CPU2, /* name space name */
- 2, /* Unique number for this processor */
- 0x0000, /* PBLK system I/O address !hardcoded! */
- 0x00 /* PBLKLEN for boot processor */
- ) {
- #include "acpi/cpstate.asl"
- }
-
- Processor(
- CPU3, /* name space name */
- 3, /* Unique number for this processor */
- 0x0000, /* PBLK system I/O address !hardcoded! */
- 0x00 /* PBLKLEN for boot processor */
- ) {
- #include "acpi/cpstate.asl"
- }
- } /* End _PR scope */
-
- /* PIC IRQ mapping registers, C00h-C01h. */
- OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
- Field(PRQM, ByteAcc, NoLock, Preserve) {
- PRQI, 0x00000008,
- PRQD, 0x00000008, /* Offset: 1h */
- }
- IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
- PIRA, 0x00000008, /* Index 0 */
- PIRB, 0x00000008, /* Index 1 */
- PIRC, 0x00000008, /* Index 2 */
- PIRD, 0x00000008, /* Index 3 */
- PIRE, 0x00000008, /* Index 4 */
- PIRF, 0x00000008, /* Index 5 */
- PIRG, 0x00000008, /* Index 6 */
- PIRH, 0x00000008, /* Index 7 */
- }
-
- /* PCI Error control register */
- OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
- Field(PERC, ByteAcc, NoLock, Preserve) {
- SENS, 0x00000001,
- PENS, 0x00000001,
- SENE, 0x00000001,
- PENE, 0x00000001,
- }
-
- /* Client Management index/data registers */
- OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
- Field(CMT, ByteAcc, NoLock, Preserve) {
- CMTI, 8,
- /* Client Management Data register */
- G64E, 1,
- G64O, 1,
- G32O, 2,
- , 2,
- GPSL, 2,
- }
-
- /* GPM Port register */
- OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
- Field(GPT, ByteAcc, NoLock, Preserve) {
- GPB0,1,
- GPB1,1,
- GPB2,1,
- GPB3,1,
- GPB4,1,
- GPB5,1,
- GPB6,1,
- GPB7,1,
- }
-
- /* Flash ROM program enable register */
- OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
- Field(FRE, ByteAcc, NoLock, Preserve) {
- , 0x00000006,
- FLRE, 0x00000001,
- }
-
- /* PM2 index/data registers */
- OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
- Field(PM2R, ByteAcc, NoLock, Preserve) {
- PM2I, 0x00000008,
- PM2D, 0x00000008,
- }
-
- /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */
- OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
- Field(PIOR, ByteAcc, NoLock, Preserve) {
- PIOI, 0x00000008,
- PIOD, 0x00000008,
- }
- IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
- Offset(0x00), /* MiscControl */
- , 1,
- T1EE, 1,
- T2EE, 1,
- Offset(0x01), /* MiscStatus */
- , 1,
- T1E, 1,
- T2E, 1,
- Offset(0x04), /* SmiWakeUpEventEnable3 */
- , 7,
- SSEN, 1,
- Offset(0x07), /* SmiWakeUpEventStatus3 */
- , 7,
- CSSM, 1,
- Offset(0x10), /* AcpiEnable */
- , 6,
- PWDE, 1,
- Offset(0x1C), /* ProgramIoEnable */
- , 3,
- MKME, 1,
- IO3E, 1,
- IO2E, 1,
- IO1E, 1,
- IO0E, 1,
- Offset(0x1D), /* IOMonitorStatus */
- , 3,
- MKMS, 1,
- IO3S, 1,
- IO2S, 1,
- IO1S, 1,
- IO0S,1,
- Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */
- APEB, 16,
- Offset(0x36), /* GEvtLevelConfig */
- , 6,
- ELC6, 1,
- ELC7, 1,
- Offset(0x37), /* GPMLevelConfig0 */
- , 3,
- PLC0, 1,
- PLC1, 1,
- PLC2, 1,
- PLC3, 1,
- PLC8, 1,
- Offset(0x38), /* GPMLevelConfig1 */
- , 1,
- PLC4, 1,
- PLC5, 1,
- , 1,
- PLC6, 1,
- PLC7, 1,
- Offset(0x3B), /* PMEStatus1 */
- GP0S, 1,
- GM4S, 1,
- GM5S, 1,
- APS, 1,
- GM6S, 1,
- GM7S, 1,
- GP2S, 1,
- STSS, 1,
- Offset(0x55), /* SoftPciRst */
- SPRE, 1,
- , 1,
- , 1,
- PNAT, 1,
- PWMK, 1,
- PWNS, 1,
-
- /* Offset(0x61), */ /* Options_1 */
- /* ,7, */
- /* R617,1, */
-
- Offset(0x65), /* UsbPMControl */
- , 4,
- URRE, 1,
- Offset(0x68), /* MiscEnable68 */
- , 3,
- TMTE, 1,
- , 1,
- Offset(0x92), /* GEVENTIN */
- , 7,
- E7IS, 1,
- Offset(0x96), /* GPM98IN */
- G8IS, 1,
- G9IS, 1,
- Offset(0x9A), /* EnhanceControl */
- ,7,
- HPDE, 1,
- Offset(0xA8), /* PIO7654Enable */
- IO4E, 1,
- IO5E, 1,
- IO6E, 1,
- IO7E, 1,
- Offset(0xA9), /* PIO7654Status */
- IO4S, 1,
- IO5S, 1,
- IO6S, 1,
- IO7S, 1,
- }
-
- /* PM1 Event Block
- * First word is PM1_Status, Second word is PM1_Enable
- */
- OperationRegion(P1EB, SystemIO, APEB, 0x04)
- Field(P1EB, ByteAcc, NoLock, Preserve) {
- TMST, 1,
- , 3,
- BMST, 1,
- GBST, 1,
- Offset(0x01),
- PBST, 1,
- , 1,
- RTST, 1,
- , 3,
- PWST, 1,
- SPWS, 1,
- Offset(0x02),
- TMEN, 1,
- , 4,
- GBEN, 1,
- Offset(0x03),
- PBEN, 1,
- , 1,
- RTEN, 1,
- , 3,
- PWDA, 1,
- }
-
- Scope(\_SB) {
- /* PCIe Configuration Space for 16 busses */
- OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
- Field(PCFG, ByteAcc, NoLock, Preserve) {
- /* Byte offsets are computed using the following technique:
- * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
- * The 8 comes from 8 functions per device, and 4096 bytes per function config space
- */
- Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
- STB5, 32,
- Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
- PT0D, 1,
- PT1D, 1,
- PT2D, 1,
- PT3D, 1,
- PT4D, 1,
- PT5D, 1,
- PT6D, 1,
- PT7D, 1,
- PT8D, 1,
- PT9D, 1,
- Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
- SBIE, 1,
- SBME, 1,
- Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
- SBRI, 8,
- Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
- SBB1, 32,
- Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
- ,14,
- P92E, 1, /* Port92 decode enable */
- }
-
- OperationRegion(SB5, SystemMemory, STB5, 0x1000)
- Field(SB5, AnyAcc, NoLock, Preserve){
- /* Port 0 */
- Offset(0x120), /* Port 0 Task file status */
- P0ER, 1,
- , 2,
- P0DQ, 1,
- , 3,
- P0BY, 1,
- Offset(0x128), /* Port 0 Serial ATA status */
- P0DD, 4,
- , 4,
- P0IS, 4,
- Offset(0x12C), /* Port 0 Serial ATA control */
- P0DI, 4,
- Offset(0x130), /* Port 0 Serial ATA error */
- , 16,
- P0PR, 1,
-
- /* Port 1 */
- offset(0x1A0), /* Port 1 Task file status */
- P1ER, 1,
- , 2,
- P1DQ, 1,
- , 3,
- P1BY, 1,
- Offset(0x1A8), /* Port 1 Serial ATA status */
- P1DD, 4,
- , 4,
- P1IS, 4,
- Offset(0x1AC), /* Port 1 Serial ATA control */
- P1DI, 4,
- Offset(0x1B0), /* Port 1 Serial ATA error */
- , 16,
- P1PR, 1,
-
- /* Port 2 */
- Offset(0x220), /* Port 2 Task file status */
- P2ER, 1,
- , 2,
- P2DQ, 1,
- , 3,
- P2BY, 1,
- Offset(0x228), /* Port 2 Serial ATA status */
- P2DD, 4,
- , 4,
- P2IS, 4,
- Offset(0x22C), /* Port 2 Serial ATA control */
- P2DI, 4,
- Offset(0x230), /* Port 2 Serial ATA error */
- , 16,
- P2PR, 1,
-
- /* Port 3 */
- Offset(0x2A0), /* Port 3 Task file status */
- P3ER, 1,
- , 2,
- P3DQ, 1,
- , 3,
- P3BY, 1,
- Offset(0x2A8), /* Port 3 Serial ATA status */
- P3DD, 4,
- , 4,
- P3IS, 4,
- Offset(0x2AC), /* Port 3 Serial ATA control */
- P3DI, 4,
- Offset(0x2B0), /* Port 3 Serial ATA error */
- , 16,
- P3PR, 1,
- }
- }
-
-
- #include "acpi/routing.asl"
-
- Scope(\_SB) {
-
- Method(CkOT, 0){
-
- if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
-
- if(CondRefOf(\_OSI,Local1))
- {
- Store(1, OSTP) /* Assume some form of XP */
- if (\_OSI("Windows 2006")) /* Vista */
- {
- Store(2, OSTP)
- }
- } else {
- If(WCMP(\_OS,"Linux")) {
- Store(3, OSTP) /* Linux */
- } Else {
- Store(4, OSTP) /* Gotta be WinCE */
- }
- }
- Return(OSTP)
- }
-
- Method(_PIC, 0x01, NotSerialized)
- {
- If (Arg0)
- {
- \_SB.CIRQ()
- }
- Store(Arg0, PMOD)
- }
- Method(CIRQ, 0x00, NotSerialized){
- Store(0, PIRA)
- Store(0, PIRB)
- Store(0, PIRC)
- Store(0, PIRD)
- Store(0, PIRE)
- Store(0, PIRF)
- Store(0, PIRG)
- Store(0, PIRH)
- }
-
- Name(IRQB, ResourceTemplate(){
- IRQ(Level,ActiveLow,Shared){15}
- })
-
- Name(IRQP, ResourceTemplate(){
- IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
- })
-
- Name(PITF, ResourceTemplate(){
- IRQ(Level,ActiveLow,Exclusive){9}
- })
-
- Device(INTA) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 1)
-
- Method(_STA, 0) {
- if (PIRA) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTA._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKA\\_DIS\n") */
- Store(0, PIRA)
- } /* End Method(_SB.INTA._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKA\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTA._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKA\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRA, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTA._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKA\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRA)
- } /* End Method(_SB.INTA._SRS) */
- } /* End Device(INTA) */
-
- Device(INTB) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 2)
-
- Method(_STA, 0) {
- if (PIRB) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTB._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKB\\_DIS\n") */
- Store(0, PIRB)
- } /* End Method(_SB.INTB._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKB\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTB._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKB\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRB, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTB._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKB\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRB)
- } /* End Method(_SB.INTB._SRS) */
- } /* End Device(INTB) */
-
- Device(INTC) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 3)
-
- Method(_STA, 0) {
- if (PIRC) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTC._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKC\\_DIS\n") */
- Store(0, PIRC)
- } /* End Method(_SB.INTC._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKC\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTC._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKC\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRC, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTC._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKC\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRC)
- } /* End Method(_SB.INTC._SRS) */
- } /* End Device(INTC) */
-
- Device(INTD) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 4)
-
- Method(_STA, 0) {
- if (PIRD) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTD._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKD\\_DIS\n") */
- Store(0, PIRD)
- } /* End Method(_SB.INTD._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKD\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTD._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKD\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRD, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTD._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKD\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRD)
- } /* End Method(_SB.INTD._SRS) */
- } /* End Device(INTD) */
-
- Device(INTE) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 5)
-
- Method(_STA, 0) {
- if (PIRE) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTE._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKE\\_DIS\n") */
- Store(0, PIRE)
- } /* End Method(_SB.INTE._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKE\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTE._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKE\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRE, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTE._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKE\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRE)
- } /* End Method(_SB.INTE._SRS) */
- } /* End Device(INTE) */
-
- Device(INTF) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 6)
-
- Method(_STA, 0) {
- if (PIRF) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTF._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKF\\_DIS\n") */
- Store(0, PIRF)
- } /* End Method(_SB.INTF._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKF\\_PRS\n") */
- Return(PITF)
- } /* Method(_SB.INTF._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKF\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRF, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTF._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKF\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRF)
- } /* End Method(_SB.INTF._SRS) */
- } /* End Device(INTF) */
-
- Device(INTG) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 7)
-
- Method(_STA, 0) {
- if (PIRG) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTG._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKG\\_DIS\n") */
- Store(0, PIRG)
- } /* End Method(_SB.INTG._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKG\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTG._CRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKG\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRG, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTG._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKG\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRG)
- } /* End Method(_SB.INTG._SRS) */
- } /* End Device(INTG) */
-
- Device(INTH) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 8)
-
- Method(_STA, 0) {
- if (PIRH) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTH._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKH\\_DIS\n") */
- Store(0, PIRH)
- } /* End Method(_SB.INTH._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKH\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTH._CRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKH\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIRH, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTH._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKH\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIRH)
- } /* End Method(_SB.INTH._SRS) */
- } /* End Device(INTH) */
-
- } /* End Scope(_SB) */
-
-
- /* Supported sleep states: */
- Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
-
- If (LAnd(SSFG, 0x01)) {
- Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
- }
- If (LAnd(SSFG, 0x02)) {
- Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
- }
- If (LAnd(SSFG, 0x04)) {
- Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
- }
- If (LAnd(SSFG, 0x08)) {
- Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
- }
-
- Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
-
- Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */
- Name(CSMS, 0) /* Current System State */
-
- /* Wake status package */
- Name(WKST,Package(){Zero, Zero})
-
- /*
- * \_PTS - Prepare to Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2, etc
- *
- * Exit:
- * -none-
- *
- * The _PTS control method is executed at the beginning of the sleep process
- * for S1-S5. The sleeping value is passed to the _PTS control method. This
- * control method may be executed a relatively long time before entering the
- * sleep state and the OS may abort the operation without notification to
- * the ACPI driver. This method cannot modify the configuration or power
- * state of any device in the system.
- */
- Method(\_PTS, 1) {
- /* DBGO("\\_PTS\n") */
- /* DBGO("From S0 to S") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
-
- /* Don't allow PCIRST# to reset USB */
- if (LEqual(Arg0,3)){
- Store(0,URRE)
- }
-
- /* Clear sleep SMI status flag and enable sleep SMI trap. */
- /*Store(One, CSSM)
- Store(One, SSEN)*/
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\_SB.SBRI, 0x13)) {
- * Store(0,\_SB.PWDE)
- *}
- */
-
- /* Clear wake status structure. */
- Store(0, Index(WKST,0))
- Store(0, Index(WKST,1))
- } /* End Method(\_PTS) */
-
- /*
- * The following method results in a "not a valid reserved NameSeg"
- * warning so I have commented it out for the duration. It isn't
- * used, so it could be removed.
- *
- *
- * \_GTS OEM Going To Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- *
- * Method(\_GTS, 1) {
- * DBGO("\\_GTS\n")
- * DBGO("From S0 to S")
- * DBGO(Arg0)
- * DBGO("\n")
- * }
- */
-
- /*
- * \_BFS OEM Back From Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- */
- Method(\_BFS, 1) {
- /* DBGO("\\_BFS\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
- }
-
- /*
- * \_WAK System Wake method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * Return package of 2 DWords
- * Dword 1 - Status
- * 0x00000000 wake succeeded
- * 0x00000001 Wake was signaled but failed due to lack of power
- * 0x00000002 Wake was signaled but failed due to thermal condition
- * Dword 2 - Power Supply state
- * if non-zero the effective S-state the power supply entered
- */
- Method(\_WAK, 1) {
- /* DBGO("\\_WAK\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
-
- /* Re-enable HPET */
- Store(1,HPDE)
-
- /* Restore PCIRST# so it resets USB */
- if (LEqual(Arg0,3)){
- Store(1,URRE)
- }
-
- /* Arbitrarily clear PciExpWakeStatus */
- Store(PWST, PWST)
-
- /* if(DeRefOf(Index(WKST,0))) {
- * Store(0, Index(WKST,1))
- * } else {
- * Store(Arg0, Index(WKST,1))
- * }
- */
- Return(WKST)
- } /* End Method(\_WAK) */
-
- Scope(\_GPE) { /* Start Scope GPE */
- /* General event 0 */
- /* Method(_L00) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 1 */
- /* Method(_L01) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 2 */
- /* Method(_L02) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 3 */
- Method(_L03) {
- /* DBGO("\\_GPE\\_L00\n") */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* General event 4 */
- /* Method(_L04) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 5 */
- /* Method(_L05) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 6 - Used for GPM6, moved to USB.asl */
- /* Method(_L06) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 7 - Used for GPM7, moved to USB.asl */
- /* Method(_L07) {
- * DBGO("\\_GPE\\_L07\n")
- * }
- */
-
- /* Legacy PM event */
- Method(_L08) {
- /* DBGO("\\_GPE\\_L08\n") */
- }
-
- /* Temp warning (TWarn) event */
- Method(_L09) {
- /* DBGO("\\_GPE\\_L09\n") */
- /* Notify (\_TZ.TZ00, 0x80) */
- }
-
- /* Reserved */
- /* Method(_L0A) {
- * DBGO("\\_GPE\\_L0A\n")
- * }
- */
-
- /* USB controller PME# */
- Method(_L0B) {
- /* DBGO("\\_GPE\\_L0B\n") */
- Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* AC97 controller PME# */
- /* Method(_L0C) {
- * DBGO("\\_GPE\\_L0C\n")
- * }
- */
-
- /* OtherTherm PME# */
- /* Method(_L0D) {
- * DBGO("\\_GPE\\_L0D\n")
- * }
- */
-
- /* GPM9 SCI event - Moved to USB.asl */
- /* Method(_L0E) {
- * DBGO("\\_GPE\\_L0E\n")
- * }
- */
-
- /* PCIe HotPlug event */
- /* Method(_L0F) {
- * DBGO("\\_GPE\\_L0F\n")
- * }
- */
-
- /* ExtEvent0 SCI event */
- Method(_L10) {
- /* DBGO("\\_GPE\\_L10\n") */
- }
-
-
- /* ExtEvent1 SCI event */
- Method(_L11) {
- /* DBGO("\\_GPE\\_L11\n") */
- }
-
- /* PCIe PME# event */
- /* Method(_L12) {
- * DBGO("\\_GPE\\_L12\n")
- * }
- */
-
- /* GPM0 SCI event - Moved to USB.asl */
- /* Method(_L13) {
- * DBGO("\\_GPE\\_L13\n")
- * }
- */
-
- /* GPM1 SCI event - Moved to USB.asl */
- /* Method(_L14) {
- * DBGO("\\_GPE\\_L14\n")
- * }
- */
-
- /* GPM2 SCI event - Moved to USB.asl */
- /* Method(_L15) {
- * DBGO("\\_GPE\\_L15\n")
- * }
- */
-
- /* GPM3 SCI event - Moved to USB.asl */
- /* Method(_L16) {
- * DBGO("\\_GPE\\_L16\n")
- * }
- */
-
- /* GPM8 SCI event - Moved to USB.asl */
- /* Method(_L17) {
- * DBGO("\\_GPE\\_L17\n")
- * }
- */
-
- /* GPIO0 or GEvent8 event */
- Method(_L18) {
- /* DBGO("\\_GPE\\_L18\n") */
- Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* GPM4 SCI event - Moved to USB.asl */
- /* Method(_L19) {
- * DBGO("\\_GPE\\_L19\n")
- * }
- */
-
- /* GPM5 SCI event - Moved to USB.asl */
- /* Method(_L1A) {
- * DBGO("\\_GPE\\_L1A\n")
- * }
- */
-
- /* Azalia SCI event */
- Method(_L1B) {
- /* DBGO("\\_GPE\\_L1B\n") */
- Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* GPM6 SCI event - Reassigned to _L06 */
- /* Method(_L1C) {
- * DBGO("\\_GPE\\_L1C\n")
- * }
- */
-
- /* GPM7 SCI event - Reassigned to _L07 */
- /* Method(_L1D) {
- * DBGO("\\_GPE\\_L1D\n")
- * }
- */
-
- /* GPIO2 or GPIO66 SCI event */
- /* Method(_L1E) {
- * DBGO("\\_GPE\\_L1E\n")
- * }
- */
-
- /* SATA SCI event - Moved to sata.asl */
- /* Method(_L1F) {
- * DBGO("\\_GPE\\_L1F\n")
- * }
- */
-
- } /* End Scope GPE */
-
- #include "acpi/usb.asl"
-
- /* South Bridge */
- Scope(\_SB) { /* Start \_SB scope */
- #include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
-
- /* _SB.PCI0 */
- /* Note: Only need HID on Primary Bus */
- Device(PCI0) {
- External (TOM1)
- External (TOM2)
- Name(_HID, EISAID("PNP0A03"))
- Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
- Method(_BBN, 0) { /* Bus number = 0 */
- Return(0)
- }
- Method(_STA, 0) {
- /* DBGO("\\_SB\\PCI0\\_STA\n") */
- Return(0x0B) /* Status is visible */
- }
-
- Method(_PRT,0) {
- If(PMOD){ Return(APR0) } /* APIC mode */
- Return (PR0) /* PIC Mode */
- } /* end _PRT */
-
- /* Describe the Northbridge devices */
- Device(AMRT) {
- Name(_ADR, 0x00000000)
- } /* end AMRT */
-
- /* The internal GFX bridge */
- Device(AGPB) {
- Name(_ADR, 0x00010000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- Return (APR1)
- }
- } /* end AGPB */
-
- /* The external GFX bridge */
- Device(PBR2) {
- Name(_ADR, 0x00020000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS2) } /* APIC mode */
- Return (PS2) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR2 */
-
- /* Dev3 is also an external GFX bridge, not used in Herring */
-
- Device(PBR4) {
- Name(_ADR, 0x00040000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS4) } /* APIC mode */
- Return (PS4) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR4 */
-
- Device(PBR5) {
- Name(_ADR, 0x00050000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS5) } /* APIC mode */
- Return (PS5) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR5 */
-
- Device(PBR6) {
- Name(_ADR, 0x00060000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS6) } /* APIC mode */
- Return (PS6) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR6 */
-
- /* The onboard EtherNet chip */
- Device(PBR7) {
- Name(_ADR, 0x00070000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS7) } /* APIC mode */
- Return (PS7) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR7 */
-
- /* GPP */
- Device(PBR9) {
- Name(_ADR, 0x00090000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APS9) } /* APIC mode */
- Return (PS9) /* PIC Mode */
- } /* end _PRT */
- } /* end PBR9 */
-
- Device(PBRa) {
- Name(_ADR, 0x000A0000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APSa) } /* APIC mode */
- Return (PSa) /* PIC Mode */
- } /* end _PRT */
- } /* end PBRa */
-
- Device(PE20) {
- Name(_ADR, 0x00150000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE0) } /* APIC mode */
- Return (PE0) /* PIC Mode */
- } /* end _PRT */
- } /* end PE20 */
- Device(PE21) {
- Name(_ADR, 0x00150001)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE1) } /* APIC mode */
- Return (PE1) /* PIC Mode */
- } /* end _PRT */
- } /* end PE21 */
- Device(PE22) {
- Name(_ADR, 0x00150002)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE2) } /* APIC mode */
- Return (APE2) /* PIC Mode */
- } /* end _PRT */
- } /* end PE22 */
- Device(PE23) {
- Name(_ADR, 0x00150003)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(APE3) } /* APIC mode */
- Return (PE3) /* PIC Mode */
- } /* end _PRT */
- } /* end PE23 */
-
- /* PCI slot 1, 2, 3 */
- Device(PIBR) {
- Name(_ADR, 0x00140004)
- Name(_PRW, Package() {0x18, 4})
-
- Method(_PRT, 0) {
- Return (PCIB)
- }
- }
-
- /* Describe the Southbridge devices */
- Device(STCR) {
- Name(_ADR, 0x00110000)
- #include "acpi/sata.asl"
- } /* end STCR */
-
- Device(UOH1) {
- Name(_ADR, 0x00120000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH1 */
-
- Device(UOH2) {
- Name(_ADR, 0x00120002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH2 */
-
- Device(UOH3) {
- Name(_ADR, 0x00130000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH3 */
-
- Device(UOH4) {
- Name(_ADR, 0x00130002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH4 */
-
- Device(UOH5) {
- Name(_ADR, 0x00160000)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH5 */
-
- Device(UOH6) {
- Name(_ADR, 0x00160002)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UOH5 */
-
- Device(UEH1) {
- Name(_ADR, 0x00140005)
- Name(_PRW, Package() {0x0B, 3})
- } /* end UEH1 */
-
- Device(SBUS) {
- Name(_ADR, 0x00140000)
- } /* end SBUS */
-
- /* Primary (and only) IDE channel */
- Device(IDEC) {
- Name(_ADR, 0x00140001)
- #include "acpi/ide.asl"
- } /* end IDEC */
-
- Device(AZHD) {
- Name(_ADR, 0x00140002)
- OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
- Field(AZPD, AnyAcc, NoLock, Preserve) {
- offset (0x42),
- NSDI, 1,
- NSDO, 1,
- NSEN, 1,
- offset (0x44),
- IPCR, 4,
- offset (0x54),
- PWST, 2,
- , 6,
- PMEB, 1,
- , 6,
- PMST, 1,
- offset (0x62),
- MMCR, 1,
- offset (0x64),
- MMLA, 32,
- offset (0x68),
- MMHA, 32,
- offset (0x6C),
- MMDT, 16,
- }
-
- Method(_INI) {
- If(LEqual(OSTP,3)){ /* If we are running Linux */
- Store(zero, NSEN)
- Store(one, NSDO)
- Store(one, NSDI)
- }
- }
- } /* end AZHD */
-
- Device(LIBR) {
- Name(_ADR, 0x00140003)
- /* Method(_INI) {
- * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
- } */ /* End Method(_SB.SBRDG._INI) */
-
- /* Real Time Clock Device */
- Device(RTC0) {
- Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){8}
- IO(Decode16,0x0070, 0x0070, 0, 2)
- /* IO(Decode16,0x0070, 0x0070, 0, 4) */
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
-
- Device(TMR) { /* Timer */
- Name(_HID,EISAID("PNP0100")) /* System Timer */
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){0}
- IO(Decode16, 0x0040, 0x0040, 0, 4)
- /* IO(Decode16, 0x0048, 0x0048, 0, 4) */
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
-
- Device(SPKR) { /* Speaker */
- Name(_HID,EISAID("PNP0800")) /* AT style speaker */
- Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x0061, 0x0061, 0, 1)
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
-
- Device(PIC) {
- Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
- Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){2}
- IO(Decode16,0x0020, 0x0020, 0, 2)
- IO(Decode16,0x00A0, 0x00A0, 0, 2)
- /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
- /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
-
- Device(MAD) { /* 8257 DMA */
- Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
- Name(_CRS, ResourceTemplate() {
- DMA(Compatibility,BusMaster,Transfer8){4}
- IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
- IO(Decode16, 0x0081, 0x0081, 0x00, 0x03)
- IO(Decode16, 0x0087, 0x0087, 0x00, 0x01)
- IO(Decode16, 0x0089, 0x0089, 0x00, 0x03)
- IO(Decode16, 0x008F, 0x008F, 0x00, 0x01)
- IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
- }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
- } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
-
- Device(COPR) {
- Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
- Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
- IRQNoFlags(){13}
- })
- } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
-#if 0
- Device(HPTM) {
- Name(_HID,EISAID("PNP0103"))
- Name(CRS,ResourceTemplate() {
- Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */
- })
- Method(_STA, 0) {
- Return(0x0F) /* sata is visible */
- }
- Method(_CRS, 0) {
- CreateDwordField(CRS, ^HPT._BAS, HPBA)
- Store(HPBA, HPBA)
- Return(CRS)
- }
- } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
-#endif
- } /* end LIBR */
-
- Device(HPBR) {
- Name(_ADR, 0x00140004)
- } /* end HostPciBr */
-
- Device(ACAD) {
- Name(_ADR, 0x00140005)
- } /* end Ac97audio */
-
- Device(ACMD) {
- Name(_ADR, 0x00140006)
- } /* end Ac97modem */
-
- Name(CRES, ResourceTemplate() {
- IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
-
- WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, /* address granularity */
- 0x0000, /* range minimum */
- 0x0CF7, /* range maximum */
- 0x0000, /* translation */
- 0x0CF8 /* length */
- )
-
- WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, /* address granularity */
- 0x0D00, /* range minimum */
- 0xFFFF, /* range maximum */
- 0x0000, /* translation */
- 0xF300 /* length */
- )
-#if 0
- Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
- Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
- Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
- Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */
-
- /* DRAM Memory from 1MB to TopMem */
- Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */
-
- /* BIOS space just below 4GB */
- DWORDMemory(
- ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000000, /* Max-Min, RLEN */
- ,,
- PCBM
- )
-
- /* DRAM memory from 4GB to TopMem2 */
- QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0xFFFFFFFF, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000000, /* Max-Min, RLEN */
- ,,
- DMHI
- )
-
- /* BIOS space just below 16EB */
- QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0xFFFFFFFF, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000000, /* Max-Min, RLEN */
- ,,
- PEBM
- )
-#endif
- /* memory space for PCI BARs below 4GB */
- Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
- }) /* End Name(_SB.PCI0.CRES) */
-
- Method(_CRS, 0) {
- /* DBGO("\\_SB\\PCI0\\_CRS\n") */
-#if 0
- CreateDWordField(CRES, ^EMM1._BAS, EM1B)
- CreateDWordField(CRES, ^EMM1._LEN, EM1L)
- CreateDWordField(CRES, ^DMLO._BAS, DMLB)
- CreateDWordField(CRES, ^DMLO._LEN, DMLL)
- CreateDWordField(CRES, ^PCBM._MIN, PBMB)
- CreateDWordField(CRES, ^PCBM._LEN, PBML)
-
- CreateQWordField(CRES, ^DMHI._MIN, DMHB)
- CreateQWordField(CRES, ^DMHI._LEN, DMHL)
- CreateQWordField(CRES, ^PEBM._MIN, EBMB)
- CreateQWordField(CRES, ^PEBM._LEN, EBML)
-
- If(LGreater(LOMH, 0xC0000)){
- Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */
- Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */
- }
-
- /* Set size of memory from 1MB to TopMem */
- Subtract(TOM1, 0x100000, DMLL)
-
- /*
- * If(LNotEqual(TOM2, 0x00000000)){
- * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2
- * Subtract(TOM2, 0x100000000, DMHL)
- * }
- */
-
- /* If there is no memory above 4GB, put the BIOS just below 4GB */
- If(LEqual(TOM2, 0x00000000)){
- Store(PBAD,PBMB) /* Reserve the "BIOS" space */
- Store(PBLN,PBML)
- }
- Else { /* Otherwise, put the BIOS just below 16EB */
- ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */
- Store(PBLN,EBML)
- }
-#endif
- CreateDWordField(CRES, ^MMIO._BAS, MM1B)
- CreateDWordField(CRES, ^MMIO._LEN, MM1L)
- /*
- * Declare memory between TOM1 and 4GB as available
- * for PCI MMIO.
- * Use ShiftLeft to avoid 64bit constant (for XP).
- * This will work even if the OS does 32bit arithmetic, as
- * 32bit (0x00000000 - TOM1) will wrap and give the same
- * result as 64bit (0x100000000 - TOM1).
- */
- Store(TOM1, MM1B)
- ShiftLeft(0x10000000, 4, Local0)
- Subtract(Local0, TOM1, Local0)
- Store(Local0, MM1L)
-
- Return(CRES) /* note to change the Name buffer */
- } /* end of Method(_SB.PCI0._CRS) */
-
- /*
- *
- * FIRST METHOD CALLED UPON BOOT
- *
- * 1. If debugging, print current OS and ACPI interpreter.
- * 2. Get PCI Interrupt routing from ACPI VSM, this
- * value is based on user choice in BIOS setup.
- */
- Method(_INI, 0) {
- /* DBGO("\\_SB\\_INI\n") */
- /* DBGO(" DSDT.ASL code from ") */
- /* DBGO(__DATE__) */
- /* DBGO(" ") */
- /* DBGO(__TIME__) */
- /* DBGO("\n Sleep states supported: ") */
- /* DBGO("\n") */
- /* DBGO(" \\_OS=") */
- /* DBGO(\_OS) */
- /* DBGO("\n \\_REV=") */
- /* DBGO(\_REV) */
- /* DBGO("\n") */
-
- /* Determine the OS we're running on */
- CkOT()
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\SBRI, 0x13)) {
- * Store(0,\PWDE)
- * }
- */
- } /* End Method(_SB._INI) */
- } /* End Device(PCI0) */
-
- Device(PWRB) { /* Start Power button device */
- Name(_HID, EISAID("PNP0C0C"))
- Name(_UID, 0xAA)
- Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
- Name(_STA, 0x0B) /* sata is invisible */
- }
- } /* End \_SB scope */
-
- Scope(\_SI) {
- Method(_SST, 1) {
- /* DBGO("\\_SI\\_SST\n") */
- /* DBGO(" New Indicator state: ") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
- }
- } /* End Scope SI */
-#if 0
- /* SMBUS Support */
- Mutex (SBX0, 0x00)
- OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
- Field (SMB0, ByteAcc, NoLock, Preserve) {
- HSTS, 8, /* SMBUS status */
- SSTS, 8, /* SMBUS slave status */
- HCNT, 8, /* SMBUS control */
- HCMD, 8, /* SMBUS host cmd */
- HADD, 8, /* SMBUS address */
- DAT0, 8, /* SMBUS data0 */
- DAT1, 8, /* SMBUS data1 */
- BLKD, 8, /* SMBUS block data */
- SCNT, 8, /* SMBUS slave control */
- SCMD, 8, /* SMBUS shaow cmd */
- SEVT, 8, /* SMBUS slave event */
- SDAT, 8 /* SMBUS slave data */
- }
-
- Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
- Store (0x1E, HSTS)
- Store (0xFA, Local0)
- While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
- Stall (0x64)
- Decrement (Local0)
- }
-
- Return (Local0)
- }
-
- Method (SWTC, 1, NotSerialized) {
- Store (Arg0, Local0)
- Store (0x07, Local2)
- Store (One, Local1)
- While (LEqual (Local1, One)) {
- Store (And (HSTS, 0x1E), Local3)
- If (LNotEqual (Local3, Zero)) { /* read sucess */
- If (LEqual (Local3, 0x02)) {
- Store (Zero, Local2)
- }
-
- Store (Zero, Local1)
- }
- Else {
- If (LLess (Local0, 0x0A)) { /* read failure */
- Store (0x10, Local2)
- Store (Zero, Local1)
- }
- Else {
- Sleep (0x0A) /* 10 ms, try again */
- Subtract (Local0, 0x0A, Local0)
- }
- }
- }
-
- Return (Local2)
- }
-
- Method (SMBR, 3, NotSerialized) {
- Store (0x07, Local0)
- If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
- Store (WCLR (), Local0) /* clear SMBUS status register before read data */
- If (LEqual (Local0, Zero)) {
- Release (SBX0)
- Return (0x0)
- }
-
- Store (0x1F, HSTS)
- Store (Or (ShiftLeft (Arg1, One), One), HADD)
- Store (Arg2, HCMD)
- If (LEqual (Arg0, 0x07)) {
- Store (0x48, HCNT) /* read byte */
- }
-
- Store (SWTC (0x03E8), Local1) /* 1000 ms */
- If (LEqual (Local1, Zero)) {
- If (LEqual (Arg0, 0x07)) {
- Store (DAT0, Local0)
- }
- }
- Else {
- Store (Local1, Local0)
- }
-
- Release (SBX0)
- }
-
- /* DBGO("the value of SMBusData0 register ") */
- /* DBGO(Arg2) */
- /* DBGO(" is ") */
- /* DBGO(Local0) */
- /* DBGO("\n") */
-
- Return (Local0)
- }
-
- /* THERMAL */
- Scope(\_TZ) {
- Name (KELV, 2732)
- Name (THOT, 800)
- Name (TCRT, 850)
-
- ThermalZone(TZ00) {
- Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
- /* DBGO("\\_TZ\\TZ00\\_AC0\n") */
- Return(Add(0, 2730))
- }
- Method(_AL0,0) { /* Returns package of cooling device to turn on */
- /* DBGO("\\_TZ\\TZ00\\_AL0\n") */
- Return(Package() {\_TZ.TZ00.FAN0})
- }
- Device (FAN0) {
- Name(_HID, EISAID("PNP0C0B"))
- Name(_PR0, Package() {PFN0})
- }
-
- PowerResource(PFN0,0,0) {
- Method(_STA) {
- Store(0xF,Local0)
- Return(Local0)
- }
- Method(_ON) {
- /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
- }
- Method(_OFF) {
- /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
- }
- }
-
- Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
- /* DBGO("\\_TZ\\TZ00\\_HOT\n") */
- Return (Add (THOT, KELV))
- }
- Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
- /* DBGO("\\_TZ\\TZ00\\_CRT\n") */
- Return (Add (TCRT, KELV))
- }
- Method(_TMP,0) { /* return current temp of this zone */
- Store (SMBR (0x07, 0x4C,, 0x00), Local0)
- If (LGreater (Local0, 0x10)) {
- Store (Local0, Local1)
- }
- Else {
- Add (Local0, THOT, Local0)
- Return (Add (400, KELV))
- }
-
- Store (SMBR (0x07, 0x4C, 0x01), Local0)
- /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
- /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
- If (LGreater (Local0, 0x10)) {
- If (LGreater (Local0, Local1)) {
- Store (Local0, Local1)
- }
-
- Multiply (Local1, 10, Local1)
- Return (Add (Local1, KELV))
- }
- Else {
- Add (Local0, THOT, Local0)
- Return (Add (400 , KELV))
- }
- } /* end of _TMP */
- } /* end of TZ00 */
- }
-#endif
-}
-/* End of ASL file */
diff --git a/src/mainboard/amd/bimini_fam10/fadt.c b/src/mainboard/amd/bimini_fam10/fadt.c
deleted file mode 100644
index f3802a0f75..0000000000
--- a/src/mainboard/amd/bimini_fam10/fadt.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * ACPI - create the Fixed ACPI Description Tables (FADT)
- */
-
-#include <string.h>
-#include <console/console.h>
-#include <arch/acpi.h>
-#include <arch/io.h>
-#include <device/device.h>
-#include "pmio.h"
-
-/*extern*/ u16 pm_base = 0x800;
-/* pm_base should be set in sb acpi */
-/* pm_base should be got from bar2 of rs780. Here I compact ACPI
- * registers into 32 bytes limit.
- * */
-
-#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */
-#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */
-#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */
-#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */
-#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */
-#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */
-
-void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
-{
- acpi_header_t *header = &(fadt->header);
-
- pm_base &= 0xFFFF;
- printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base);
-
- /* Prepare the header */
- memset((void *)fadt, 0, sizeof(acpi_fadt_t));
- memcpy(header->signature, "FACP", 4);
- header->length = 244;
- header->revision = 1;
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, "COREBOOT", 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
- header->asl_compiler_revision = 0;
-
- fadt->firmware_ctrl = (u32) facs;
- fadt->dsdt = (u32) dsdt;
- /* 3=Workstation,4=Enterprise Server, 7=Performance Server */
- fadt->preferred_pm_profile = 0x03;
- fadt->sci_int = 9;
- /* disable system management mode by setting to 0: */
- fadt->smi_cmd = 0;
- fadt->acpi_enable = 0xf0;
- fadt->acpi_disable = 0xf1;
- fadt->s4bios_req = 0x0;
- fadt->pstate_cnt = 0xe2;
-
- pm_iowrite(0x60, ACPI_PM_EVT_BLK & 0xFF);
- pm_iowrite(0x61, ACPI_PM_EVT_BLK >> 8);
- pm_iowrite(0x62, ACPI_PM1_CNT_BLK & 0xFF);
- pm_iowrite(0x63, ACPI_PM1_CNT_BLK >> 8);
- pm_iowrite(0x64, ACPI_PM_TMR_BLK & 0xFF);
- pm_iowrite(0x65, ACPI_PM_TMR_BLK >> 8);
- pm_iowrite(0x68, ACPI_GPE0_BLK & 0xFF);
- pm_iowrite(0x69, ACPI_GPE0_BLK >> 8);
-
- /* CpuControl is in \_PR.CPU0, 6 bytes */
- pm_iowrite(0x66, ACPI_CPU_CONTORL & 0xFF);
- pm_iowrite(0x67, ACPI_CPU_CONTORL >> 8);
-
- pm_iowrite(0x6A, 0); /* AcpiSmiCmdLo */
- pm_iowrite(0x6B, 0); /* AcpiSmiCmdHi */
-
- pm_iowrite(0x6C, ACPI_PMA_CNT_BLK & 0xFF);
- pm_iowrite(0x6D, ACPI_PMA_CNT_BLK >> 8);
-
- pm_iowrite(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2); /* AcpiDecodeEnable, When set, SB uses
- * the contents of the PM registers at
- * index 60-6B to decode ACPI I/O address.
- * AcpiSmiEn & SmiCmdEn*/
- /* RTC_En_En, TMR_En_En, GBL_EN_EN */
- outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */
-
- fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
- fadt->pm1b_evt_blk = 0x0000;
- fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
- fadt->pm1b_cnt_blk = 0x0000;
- fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
- fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
- fadt->gpe0_blk = ACPI_GPE0_BLK;
- fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
-
- fadt->pm1_evt_len = 4;
- fadt->pm1_cnt_len = 2;
- fadt->pm2_cnt_len = 1;
- fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 8;
- fadt->gpe1_blk_len = 0;
- fadt->gpe1_base = 0;
-
- fadt->cst_cnt = 0xe3;
- fadt->p_lvl2_lat = 101;
- fadt->p_lvl3_lat = 1001;
- fadt->flush_size = 0;
- fadt->flush_stride = 0;
- fadt->duty_offset = 1;
- fadt->duty_width = 3;
- fadt->day_alrm = 0; /* 0x7d these have to be */
- fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
- fadt->century = 0; /* 0x7f to make rtc alrm work */
- fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
- fadt->flags = 0x0001c1a5;/* 0x25; */
-
- fadt->res2 = 0;
-
- fadt->reset_reg.space_id = 1;
- fadt->reset_reg.bit_width = 8;
- fadt->reset_reg.bit_offset = 0;
- fadt->reset_reg.resv = 0;
- fadt->reset_reg.addrl = 0xcf9;
- fadt->reset_reg.addrh = 0x0;
-
- fadt->reset_value = 6;
- fadt->x_firmware_ctl_l = (u32) facs;
- fadt->x_firmware_ctl_h = 0;
- fadt->x_dsdt_l = (u32) dsdt;
- fadt->x_dsdt_h = 0;
-
- fadt->x_pm1a_evt_blk.space_id = 1;
- fadt->x_pm1a_evt_blk.bit_width = 32;
- fadt->x_pm1a_evt_blk.bit_offset = 0;
- fadt->x_pm1a_evt_blk.resv = 0;
- fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
- fadt->x_pm1a_evt_blk.addrh = 0x0;
-
- fadt->x_pm1b_evt_blk.space_id = 1;
- fadt->x_pm1b_evt_blk.bit_width = 4;
- fadt->x_pm1b_evt_blk.bit_offset = 0;
- fadt->x_pm1b_evt_blk.resv = 0;
- fadt->x_pm1b_evt_blk.addrl = 0x0;
- fadt->x_pm1b_evt_blk.addrh = 0x0;
-
- fadt->x_pm1a_cnt_blk.space_id = 1;
- fadt->x_pm1a_cnt_blk.bit_width = 16;
- fadt->x_pm1a_cnt_blk.bit_offset = 0;
- fadt->x_pm1a_cnt_blk.resv = 0;
- fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
- fadt->x_pm1a_cnt_blk.addrh = 0x0;
-
- fadt->x_pm1b_cnt_blk.space_id = 1;
- fadt->x_pm1b_cnt_blk.bit_width = 2;
- fadt->x_pm1b_cnt_blk.bit_offset = 0;
- fadt->x_pm1b_cnt_blk.resv = 0;
- fadt->x_pm1b_cnt_blk.addrl = 0x0;
- fadt->x_pm1b_cnt_blk.addrh = 0x0;
-
- fadt->x_pm2_cnt_blk.space_id = 1;
- fadt->x_pm2_cnt_blk.bit_width = 0;
- fadt->x_pm2_cnt_blk.bit_offset = 0;
- fadt->x_pm2_cnt_blk.resv = 0;
- fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK;
- fadt->x_pm2_cnt_blk.addrh = 0x0;
-
- fadt->x_pm_tmr_blk.space_id = 1;
- fadt->x_pm_tmr_blk.bit_width = 32;
- fadt->x_pm_tmr_blk.bit_offset = 0;
- fadt->x_pm_tmr_blk.resv = 0;
- fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
- fadt->x_pm_tmr_blk.addrh = 0x0;
-
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 32;
- fadt->x_gpe0_blk.bit_offset = 0;
- fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
- fadt->x_gpe0_blk.addrh = 0x0;
-
- fadt->x_gpe1_blk.space_id = 1;
- fadt->x_gpe1_blk.bit_width = 0;
- fadt->x_gpe1_blk.bit_offset = 0;
- fadt->x_gpe1_blk.resv = 0;
- fadt->x_gpe1_blk.addrl = 0;
- fadt->x_gpe1_blk.addrh = 0x0;
-
- header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
-}
diff --git a/src/mainboard/amd/bimini_fam10/get_bus_conf.c b/src/mainboard/amd/bimini_fam10/get_bus_conf.c
deleted file mode 100644
index e53aef5109..0000000000
--- a/src/mainboard/amd/bimini_fam10/get_bus_conf.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <stdlib.h>
-#if CONFIG_LOGICAL_CPUS==1
-#include <cpu/amd/multicore.h>
-#endif
-#include <cpu/amd/amdfam10_sysconf.h>
-
-/* Global variables for MB layouts and these will be shared by irqtable mptable
-* and acpi_tables busnum is default.
-*/
-int bus_isa;
-u8 bus_rs780[11];
-u8 bus_sb800[3];
-u32 apicid_sb800;
-
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
- 0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
- 0x20202020,
-};
-
-u32 bus_type[256];
-
-u32 sbdn_rs780;
-u32 sbdn_sb800;
-
-extern void get_pci1234(void);
-
-static u32 get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
- u32 apicid_base;
- device_t dev;
- int i, j;
-
- if (get_bus_conf_done == 1)
- return; /* do it only once */
- get_bus_conf_done = 1;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
- sbdn_rs780 = sysconf.sbdn;
- sbdn_sb800 = 0;
-
- for (i = 0; i < 3; i++) {
- bus_sb800[i] = 0;
- }
- for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) {
- bus_rs780[i] = 0;
- }
-
- for (i = 0; i < 256; i++) {
- bus_type[i] = 0; /* default ISA bus. */
- }
-
- bus_type[0] = 1; /* pci */
-
- bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff;
- bus_sb800[0] = bus_rs780[0];
-
- bus_type[bus_rs780[0]] = 1;
-
- /* sb800 */
- dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
- if (dev) {
- bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- for (j = bus_sb800[1]; j < bus_isa; j++)
- bus_type[j] = 1;
- }
-
- for (i = 0; i < 4; i++) {
- dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i));
- if (dev) {
- bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- }
- }
- for (j = bus_sb800[2]; j < bus_isa; j++)
- bus_type[j] = 1;
-
- /* rs780 */
- for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) {
- dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0));
- if (dev) {
- bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- if(255 != bus_rs780[i]) {
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- bus_type[bus_rs780[i]] = 1; /* PCI bus. */
- }
- }
- }
-
- /* I/O APICs: APIC ID Version State Address */
- bus_isa = 10;
-#if CONFIG_LOGICAL_CPUS==1
- apicid_base = get_apicid_base(1);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
-#endif
- apicid_sb800 = apicid_base + 0;
-}
diff --git a/src/mainboard/amd/bimini_fam10/irq_tables.c b/src/mainboard/amd/bimini_fam10/irq_tables.c
deleted file mode 100644
index 9825559b66..0000000000
--- a/src/mainboard/amd/bimini_fam10/irq_tables.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-#include <cpu/amd/amdfam10_sysconf.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
- u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
- u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
- u8 slot, u8 rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-extern u8 bus_isa;
-extern u8 bus_rs780[8];
-extern u8 bus_sb800[2];
-extern unsigned long sbdn_sb800;
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- u32 slot_num;
- u8 *v;
-
- u8 sum = 0;
- int i;
-
- get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (u8 *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = bus_sb800[0];
- pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4;
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1002;
- pirq->rtr_device = 0x4384;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-
- /* pci bridge */
- write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4,
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
- pirq_info++;
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "write_pirq_routing_table done.\n");
-
- return (unsigned long)pirq_info;
-}
diff --git a/src/mainboard/amd/bimini_fam10/mainboard.c b/src/mainboard/amd/bimini_fam10/mainboard.c
deleted file mode 100644
index 11667d1dd1..0000000000
--- a/src/mainboard/amd/bimini_fam10/mainboard.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <arch/io.h>
-#include <boot/tables.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/mtrr.h>
-#include <device/pci_def.h>
-//#include <southbridge/amd/sb800/sb800.h>
-#include "pmio.h"
-#include "chip.h"
-
-uint64_t uma_memory_base, uma_memory_size;
-
-u8 is_dev3_present(void);
-void set_pcie_dereset(void);
-void set_pcie_reset(void);
-void enable_int_gfx(void);
-
-/* GPIO6. */
-void enable_int_gfx(void)
-{
- u8 byte;
-
- volatile u8 *gpio_reg;
-
- pm_iowrite(0xEA, 0x01); /* diable the PCIB */
- /* Disable Gec */
- byte = pm_ioread(0xF6);
- byte |= 1;
- pm_iowrite(0xF6, byte);
- /* make sure the fed80000 is accessible */
- byte = pm_ioread(0x24);
- byte |= 1;
- pm_iowrite(0x24, byte);
-
- gpio_reg = (volatile u8 *)0xFED80000 + 0xD00; /* IoMux Register */
-
- *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */
- *(gpio_reg + 170) = 0x1; /* gpio_gate */
-
- gpio_reg = (volatile u8 *)0xFED80000 + 0x100; /* GPIO Registers */
-
- *(gpio_reg + 0x6) = 0x8;
- *(gpio_reg + 170) = 0x0;
-}
-
-/*
- * Bimini uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
- * pull it up before training the slot.
- ***/
-void set_pcie_dereset(void)
-{
- /* GPIO 50h reset PCIe slot */
-/*
- u8 *addr = (u8 *)(0xFED80000 + 0x100 + 0x50);
- u8 byte = ~(1 << 5);
- byte |= ~(1 << 6);
- *addr = byte;
-*/
-}
-
-void set_pcie_reset(void)
-{
- /* GPIO 50h reset PCIe slot */
-/*
- u8 *addr = (u8 *)(0xFED80000 + 0x100 + 0x50);
- u8 byte = ~((1 << 5) | (1 << 6));
- *addr = byte;
-*/
-}
-
-u8 is_dev3_present(void)
-{
- return 0;
-}
-
-#if 0 /* not tested yet. */
-/********************************************************
-* bimini uses SB800 GPIO9 to detect IDE_DMA66.
-* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
-* get the cable type, 40 pin or 80 pin?
-********************************************************/
-static void get_ide_dma66(void)
-{
- u8 byte;
- /*u32 sm_dev, ide_dev; */
- device_t sm_dev, ide_dev;
-
- sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
-
- byte = pci_read_config8(sm_dev, 0xA9);
- byte |= (1 << 5); /* Set Gpio9 as input */
- pci_write_config8(sm_dev, 0xA9, byte);
-
- ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
- byte = pci_read_config8(ide_dev, 0x56);
- byte &= ~(7 << 0);
- if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
- byte |= 2 << 0; /* mode 2 */
- else
- byte |= 5 << 0; /* mode 5 */
- pci_write_config8(ide_dev, 0x56, byte);
-}
-#endif /* get_ide_dma66() */
-
-/*************************************************
-* enable the dedicated function in bimini board.
-* This function called early than rs780_enable.
-*************************************************/
-static void bimini_enable(device_t dev)
-{
- /* Leave it for furture use. */
- /* struct mainboard_config *mainboard =
- (struct mainboard_config *)dev->chip_info; */
-
- printk(BIOS_INFO, "Mainboard BIMINI Enable. dev=0x%p\n", dev);
-
-#if (CONFIG_GFXUMA == 1)
- msr_t msr, msr2;
-
- /* TOP_MEM: the top of DRAM below 4G */
- msr = rdmsr(TOP_MEM);
- printk
- (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
- __func__, msr.lo, msr.hi);
-
- /* TOP_MEM2: the top of DRAM above 4G */
- msr2 = rdmsr(TOP_MEM2);
- printk
- (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
- __func__, msr2.lo, msr2.hi);
-
- /* refer to UMA Size Consideration in 780 BDG. */
- switch (msr.lo) {
- case 0x10000000: /* 256M system memory */
- uma_memory_size = 0x4000000; /* 64M recommended UMA */
- break;
-
- case 0x20000000: /* 512M system memory */
- uma_memory_size = 0x8000000; /* 128M recommended UMA */
- break;
-
- default: /* 1GB and above system memory */
- uma_memory_size = 0x10000000; /* 256M recommended UMA */
- break;
- }
-
- uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
- printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
- __func__, uma_memory_size, uma_memory_base);
-
- /* TODO: TOP_MEM2 */
-#else
- uma_memory_size = 0x8000000; /* 128M recommended UMA */
- uma_memory_base = 0x38000000; /* 1GB system memory supposed */
-#endif
-
- set_pcie_dereset();
- enable_int_gfx();
- /* get_ide_dma66(); */
-}
-
-int add_mainboard_resources(struct lb_memory *mem)
-{
- /* UMA is removed from system memory in the northbridge code, but
- * in some circumstances we want the memory mentioned as reserved.
- */
-#if (CONFIG_GFXUMA == 1)
- printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
- uma_memory_base, uma_memory_size);
- lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
- uma_memory_size);
-#endif
- return 0;
-}
-
-struct chip_operations mainboard_ops = {
- CHIP_NAME("AMD Bimini Mainboard")
- .enable_dev = bimini_enable,
-};
diff --git a/src/mainboard/amd/bimini_fam10/mb_sysconf.h b/src/mainboard/amd/bimini_fam10/mb_sysconf.h
deleted file mode 100644
index 1f4e715376..0000000000
--- a/src/mainboard/amd/bimini_fam10/mb_sysconf.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef MB_SYSCONF_H
-#define MB_SYSCONF_H
-
-struct mb_sysconf_t {
- u8 bus_isa;
- u8 bus_8132_0;
- u8 bus_8132_1;
- u8 bus_8132_2;
- u8 bus_8111_0;
- u8 bus_8111_1;
- u8 bus_8132a[31][3];
- u8 bus_8151[31][2];
-
- u32 apicid_8111;
- u32 apicid_8132_1;
- u32 apicid_8132_2;
- u32 apicid_8132a[31][2];
- u32 sbdn3;
- u32 sbdn3a[31];
- u32 sbdn5[31];
- u32 bus_type[256];
-};
-
-#endif
diff --git a/src/mainboard/amd/bimini_fam10/mptable.c b/src/mainboard/amd/bimini_fam10/mptable.c
deleted file mode 100644
index c14e769b41..0000000000
--- a/src/mainboard/amd/bimini_fam10/mptable.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <arch/io.h>
-#include <string.h>
-#include <stdint.h>
-#include "pmio.h"
-#include <cpu/amd/amdfam10_sysconf.h>
-
-extern int bus_isa;
-extern u8 bus_rs780[11];
-extern u8 bus_sb800[2];
-extern u32 apicid_sb800;
-extern u32 bus_type[256];
-extern u32 sbdn_rs780;
-extern u32 sbdn_sb800;
-
-u8 intr_data[] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x10,0x11,0x12,0x13
-};
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- u32 dword;
- u8 byte;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LAPIC_ADDR);
-
- smp_write_processors(mc);
-
- get_bus_conf();
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
- /* I/O APICs: APIC ID Version State Address */
-
- dword = 0;
- dword = pm_ioread(0x34) & 0xF0;
- dword |= (pm_ioread(0x35) & 0xFF) << 8;
- dword |= (pm_ioread(0x36) & 0xFF) << 16;
- dword |= (pm_ioread(0x37) & 0xFF) << 24;
- smp_write_ioapic(mc, apicid_sb800, 0x11, dword);
-
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
-
- mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
-
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
-#if CONFIG_GENERATE_ACPI_TABLES == 0
-#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
-#else
-#define PCI_INT(bus, dev, fn, pin)
-#endif
-
- PCI_INT(0x0, 0x14, 0x0, 0x10);
- /* HD Audio: */
- PCI_INT(0x0, 0x14, 0x2, 0x12);
-
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
-
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
-
- /* on board NIC & Slot PCIE. */
- /* PCI_INT(bus_rs780[0x1], 0x5, 0x0, 0x12); */
-/* PCI_INT(bus_rs780[0x1], 0x5, 0x1, 0x13); */
- PCI_INT(bus_rs780[0x2], 0x0, 0x0, 0x12); /* Dev 2, external GFX */
- /* PCI_INT(bus_rs780[0x3], 0x0, 0x0, 0x13); */
- PCI_INT(bus_rs780[0x4], 0x0, 0x0, 0x10);
- /* configuration B doesnt need dev 5,6,7 */
- /*
- * PCI_INT(bus_rs780[0x5], 0x0, 0x0, 0x11);
- * PCI_INT(bus_rs780[0x6], 0x0, 0x0, 0x12);
- * PCI_INT(bus_rs780[0x7], 0x0, 0x0, 0x13);
- */
- PCI_INT(bus_rs780[0x9], 0x0, 0x0, 0x11);
- PCI_INT(bus_rs780[0xA], 0x0, 0x0, 0x12); /* NIC */
-
- /* PCI slots */
- /* PCI_SLOT 0. */
- PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
- PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
- PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
- PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
- PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
- PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
- PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
- PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
- PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
- PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
-
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
- IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
- mc->mpe_checksum =
- smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
- mc, smp_next_mpe_entry(mc));
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/amd/bimini_fam10/pmio.c b/src/mainboard/amd/bimini_fam10/pmio.c
deleted file mode 100644
index 3f1efd3895..0000000000
--- a/src/mainboard/amd/bimini_fam10/pmio.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include "pmio.h"
-
-static void pmio_write_index(u16 port_base, u8 reg, u8 value)
-{
- outb(reg, port_base);
- outb(value, port_base + 1);
-}
-
-static u8 pmio_read_index(u16 port_base, u8 reg)
-{
- outb(reg, port_base);
- return inb(port_base + 1);
-}
-
-void pm_iowrite(u8 reg, u8 value)
-{
- pmio_write_index(PM_INDEX, reg, value);
-}
-
-u8 pm_ioread(u8 reg)
-{
- return pmio_read_index(PM_INDEX, reg);
-}
-
-void pm2_iowrite(u8 reg, u8 value)
-{
- pmio_write_index(PM2_INDEX, reg, value);
-}
-
-u8 pm2_ioread(u8 reg)
-{
- return pmio_read_index(PM2_INDEX, reg);
-}
diff --git a/src/mainboard/amd/bimini_fam10/pmio.h b/src/mainboard/amd/bimini_fam10/pmio.h
deleted file mode 100644
index ae5f0f983f..0000000000
--- a/src/mainboard/amd/bimini_fam10/pmio.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _PMIO_H_
-#define _PMIO_H_
-
-#define PM_INDEX 0xCD6
-#define PM_DATA 0xCD7
-#define PM2_INDEX 0xCD0
-#define PM2_DATA 0xCD1
-
-void pm_iowrite(u8 reg, u8 value);
-u8 pm_ioread(u8 reg);
-void pm2_iowrite(u8 reg, u8 value);
-u8 pm2_ioread(u8 reg);
-
-#endif
diff --git a/src/mainboard/amd/bimini_fam10/reset.c b/src/mainboard/amd/bimini_fam10/reset.c
deleted file mode 100644
index 0b32bedb36..0000000000
--- a/src/mainboard/amd/bimini_fam10/reset.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <reset.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-
-#define HT_INIT_CONTROL 0x6C
-#define HTIC_BIOSR_Detect (1<<5)
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 32
-#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
-#else
-#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
-#endif
-
-static inline void set_bios_reset(void)
-{
- u32 nodes, htic;
- device_t dev;
- int i;
-
- nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
- for (i = 0; i < nodes; i++) {
- dev = NODE_PCI(i, 0);
- htic = pci_read_config32(dev, HT_INIT_CONTROL);
- htic &= ~HTIC_BIOSR_Detect;
- pci_write_config32(dev, HT_INIT_CONTROL, htic);
- }
-}
-
-void hard_reset(void)
-{
- set_bios_reset();
- /* Try rebooting through port 0xcf9 */
- /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
- outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
- outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
-}
-
-//SbReset();
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
diff --git a/src/mainboard/amd/bimini_fam10/resourcemap.c b/src/mainboard/amd/bimini_fam10/resourcemap.c
deleted file mode 100644
index 7a50f90f4d..0000000000
--- a/src/mainboard/amd/bimini_fam10/resourcemap.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-static void setup_mb_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
- };
-
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/amd/bimini_fam10/romstage.c b/src/mainboard/amd/bimini_fam10/romstage.c
deleted file mode 100644
index 503ddea951..0000000000
--- a/src/mainboard/amd/bimini_fam10/romstage.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-//#define SYSTEM_TYPE 0 /* SERVER */
-#define SYSTEM_TYPE 1 /* DESKTOP */
-//#define SYSTEM_TYPE 2 /* MOBILE */
-
-//used by incoherent_ht
-#define FAM10_SCAN_PCI_BUS 0
-#define FAM10_ALLOCATE_IO_RANGE 0
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <console/console.h>
-#include <cpu/amd/model_10xxx_rev.h>
-#include "northbridge/amd/amdfam10/raminit.h"
-#include "northbridge/amd/amdfam10/amdfam10.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdfam10/reset_test.c"
-#include <console/loglevel.h>
-#include "cpu/x86/bist.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include <cpu/amd/mtrr.h>
-#include "northbridge/amd/amdfam10/setup_resource_map.c"
-#include "southbridge/amd/rs780/early_setup.c"
-#include <SbEarly.h>
-#include <SBPLATFORM.h> /* SB OEM constants */
-#include <southbridge/amd/cimx_wrapper/sb800/smbus.h>
-#include "northbridge/amd/amdfam10/debug.c"
-
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
-static int spd_read_byte(u32 device, u32 address)
-{
- return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
-}
-
-#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
-#include "northbridge/amd/amdfam10/pci.c"
-#include "resourcemap.c"
-#include "cpu/amd/quadcore/quadcore.c"
-#include "cpu/amd/car/post_cache_as_ram.c"
-#include "cpu/amd/microcode/microcode.c"
-#include "cpu/amd/model_10xxx/update_microcode.c"
-#include "cpu/amd/model_10xxx/init_cpus.c"
-#include "northbridge/amd/amdfam10/early_ht.c"
-
-#define RC00 0
-#define RC01 1
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
-#include <reset.h>
-void soft_reset(void)
-{
- set_bios_reset();
- /* link reset */
- outb(0x06, 0x0cf9);
-}
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0, val;
- msr_t msr;
-
- if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- /* mov bsp to bus 0xff when > 8 nodes */
- set_bsp_node_CHtExtNodeCfgEn();
- enumerate_ht_chain();
-
- //enable port80 decoding and southbridge poweron init
- sb_poweron_init();
- SbStall(200); //wait 200us, bimini must wait otherwise need to reset.
- }
-
- post_code(0x30);
-
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */
- /* All cores run this but the BSP(node0,core0) is the only core that returns. */
- }
-
- post_code(0x32);
-
- enable_rs780_dev8();
-
- uart_init();
- console_init();
- printk(BIOS_DEBUG, "\n");
-
-// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- // Load MPB
- val = cpuid_eax(1);
- printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
- printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
- printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid);
- printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
-
- /* Setup sysinfo defaults */
- set_sysinfo_in_ram(0);
-
- update_microcode(val);
- post_code(0x33);
-
- cpuSetAMDMSR();
- post_code(0x34);
-
- amd_ht_init(sysinfo);
- post_code(0x35);
-
- /* Setup nodes PCI space and start core 0 AP init. */
- finalize_node_setup(sysinfo);
-
- /* Setup any mainboard PCI settings etc. */
- setup_mb_resource_map();
- post_code(0x36);
-
- /* wait for all the APs core0 started by finalize_node_setup. */
- /* FIXME: A bunch of cores are going to start output to serial at once.
- It would be nice to fixup prink spinlocks for ROM XIP mode.
- I think it could be done by putting the spinlock flag in the cache
- of the BSP located right after sysinfo.
- */
- wait_all_core0_started();
-
-#if CONFIG_LOGICAL_CPUS==1
- /* Core0 on each node is configured. Now setup any additional cores. */
- printk(BIOS_DEBUG, "start_other_cores()\n");
- start_other_cores();
- post_code(0x37);
- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- post_code(0x38);
-
- /* run _early_setup before soft-reset. */
- rs780_early_setup();
-
-#if CONFIG_SET_FIDVID == 1
- msr = rdmsr(0xc0010071);
- printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
-
- /* FIXME: The sb fid change may survive the warm reset and only
- need to be done once.*/
- //enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
- post_code(0x39);
-
- if (!warm_reset_detect(0)) { // BSP is node 0
- init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
- } else {
- init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
- }
-
- post_code(0x3A);
-
- /* show final fid and vid */
- msr=rdmsr(0xc0010071);
- printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
-#endif
-
- rs780_htinit();
-
- /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
- if (!warm_reset_detect(0)) {
- print_info("...WARM RESET...\n\n\n");
- soft_reset();
- die("After soft_reset_x - shouldn't see this message!!!\n");
- }
-
- post_code(0x3B);
-
- /* It's the time to set ctrl in sysinfo now; */
- printk(BIOS_DEBUG, "fill_mem_ctrl()\n");
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
- post_code(0x40);
-
-// die("Die Before MCT init.");
-
- printk(BIOS_DEBUG, "raminit_amdmct()\n");
- raminit_amdmct(sysinfo);
- post_code(0x41);
-
-/*
- dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200);
- dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200);
- dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200);
- dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
-*/
-
-// ram_check(0x00200000, 0x00200000 + (640 * 1024));
-// ram_check(0x40200000, 0x40200000 + (640 * 1024));
-
-// die("After MCT init before CAR disabled.");
-
- rs780_before_pci_init();
-
- post_code(0x42);
- post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
- post_code(0x43); // Should never see this post code.
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 20:50:18 +0000