get_bus_cong using sysconf instead

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

41 files changed, 605 insertions, 306 deletions

diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb
index b1e5022c31..7d39b92fb5 100644
--- a/src/mainboard/tyan/s2881/Options.lb
+++ b/src/mainboard/tyan/s2881/Options.lb
@@ -54,6 +54,11 @@ uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
 uses HW_MEM_HOLE_SIZEK
 
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
 uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
@@ -121,6 +126,18 @@ default CONFIG_LOGICAL_CPUS=1
 #CHIP_NAME ?
 default CONFIG_CHIP_NAME=1
 
+##HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0x0a
+
+##real SB Unit ID, default is 0x20, mean dont touch it at last
+default HT_CHAIN_END_UNITID_BASE=0x06
+
+#make the SB HT chain on bus 0, default is not (0)
+default SB_HT_CHAIN_ON_BUS0=0
+
+##only offset for SB chain?, default is yes(1)
+#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
 #1G memory hole
 default HW_MEM_HOLE_SIZEK=0x100000
 
diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c
index 87d5748514..eb1e382ee3 100644
--- a/src/mainboard/tyan/s2881/auto.c
+++ b/src/mainboard/tyan/s2881/auto.c
@@ -20,7 +20,7 @@
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/cpu_rev.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "cpu/amd/mtrr/amd_earlymtrr.c"
 #include "cpu/x86/bist.h"
diff --git a/src/mainboard/tyan/s2881/cache_as_ram_auto.c b/src/mainboard/tyan/s2881/cache_as_ram_auto.c
index 50c543592b..1ced1c970d 100644
--- a/src/mainboard/tyan/s2881/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2881/cache_as_ram_auto.c
@@ -1,7 +1,7 @@
 #define ASSEMBLY 1
 #define __ROMCC__
 
-#define K8_4RANK_DIMM_SUPPORT 1
+#define QRANK_DIMM_SUPPORT 1
 
 #if CONFIG_LOGICAL_CPUS==1
 #define SET_NB_CFG_54 1
@@ -19,7 +19,19 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+        int i;
+        for(i=0;i<0x80000;i++) {
+                outb(value, 0x80);
+        }
+#endif
+}
+#endif
+
 #include <cpu/amd/model_fxx_rev.h>
+
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
@@ -113,9 +125,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 
         enumerate_ht_chain();
 
+        /* Setup the ck804 */
         amd8111_enable_rom();
 
         /* Is this a deliberate reset by the bios */
+//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal_x) {
                 goto normal_image;
         }
@@ -127,12 +141,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
                 goto fallback_image;
         }
  normal_image:
+//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
                 );
 
  fallback_image:
+//        post_code(0x25);
 	;
 }
 #endif
@@ -170,6 +186,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
 
+//	post_code(0x32);
 	
  	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
@@ -179,6 +196,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	report_bist_failure(bist);
 
         setup_s2881_resource_map();
+#if 0
+        dump_pci_device(PCI_DEV(0, 0x18, 0));
+	dump_pci_device(PCI_DEV(0, 0x19, 0));
+#endif
 
 	needs_reset = setup_coherent_ht_domain();
 
@@ -197,6 +218,12 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
        	}
 
 	enable_smbus();
+#if 0
+	dump_spd_registers(&cpu[0]);
+#endif
+#if 0
+	dump_smbus_registers();
+#endif
 
         allow_all_aps_stop(bsp_apicid);
 
@@ -207,6 +234,9 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
         memreset_setup();
         sdram_initialize(nodes, ctrl);
 
+#if 0
+	dump_pci_devices();
+#endif
 
 	post_cache_as_ram();
 }
diff --git a/src/mainboard/tyan/s2881/cmos.layout b/src/mainboard/tyan/s2881/cmos.layout
index 5eb88b9a5a..c1f3d75316 100644
--- a/src/mainboard/tyan/s2881/cmos.layout
+++ b/src/mainboard/tyan/s2881/cmos.layout
@@ -78,10 +78,10 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
 9     0     off
 9     1     87.5%
 9     2     75.0%
diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c
index 01fd2e1a5f..82de11317b 100644
--- a/src/mainboard/tyan/s2881/get_bus_conf.c
+++ b/src/mainboard/tyan/s2881/get_bus_conf.c
@@ -7,6 +7,8 @@
 #include <cpu/amd/dualcore.h>
 #endif
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 
 // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
 //busnum is default
@@ -20,8 +22,7 @@ unsigned apicid_8111 ;
 unsigned apicid_8131_1;
 unsigned apicid_8131_2;
 
-unsigned sblk;
-unsigned pci1234[] = 
+unsigned pci1234x[] = 
 {        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
 	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
         0x0000ff0,
@@ -33,9 +34,7 @@ unsigned pci1234[] =
 //        0x0000ff0,
 //        0x0000ff0
 };
-unsigned hc_possible_num;
-unsigned sbdn;
-unsigned hcdn[] = 
+unsigned hcdnx[] = 
 { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
 	0x20202020,
 //	0x20202020,
@@ -58,23 +57,28 @@ void get_bus_conf(void)
 	unsigned apicid_base;
 
         device_t dev;
+        int i;
 
-	if(get_bus_conf_done==1) return; //do it only once
+        if(get_bus_conf_done==1) return; //do it only once
 
-	get_bus_conf_done = 1;
+        get_bus_conf_done = 1;
 
-	hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);	
-	
-	get_sblk_pci1234();
+        sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+        for(i=0;i<sysconf.hc_possible_num; i++) {
+                sysconf.pci1234[i] = pci1234x[i];
+                sysconf.hcdn[i] = hcdnx[i];
+        }
+
+        get_sblk_pci1234();
 	
-	sbdn = (hcdn[0] >> 8) & 0xff;
-	sbdn3 = hcdn[0] & 0xff;
+	sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
+	sbdn3 = sysconf.hcdn[0] & 0xff;
 
-	bus_8131_0 = (pci1234[0] >> 16) & 0xff;
+	bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff;
 	bus_8111_0 = bus_8131_0;
 
                 /* 8111 */
-        dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0));
+        dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
         if (dev) {
                 bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
 #if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE
@@ -91,11 +95,6 @@ void get_bus_conf(void)
         dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
         if (dev) {
                 bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
-                bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                bus_isa++;
-//              printk_debug("bus_isa=%d\n",bus_isa);
-#endif
         }
         else {
                 printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
@@ -105,6 +104,11 @@ void get_bus_conf(void)
         dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0));
         if (dev) {
                 bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+                bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+                bus_isa++;
+//              printk_debug("bus_isa=%d\n",bus_isa);
+#endif
         }
         else {
                 printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c
index ad4785b899..c428ec5dee 100644
--- a/src/mainboard/tyan/s2881/irq_tables.c
+++ b/src/mainboard/tyan/s2881/irq_tables.c
@@ -10,6 +10,8 @@
 #include <stdint.h>
 #include <arch/pirq_routing.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
 		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
 		uint8_t slot, uint8_t rfu)
@@ -34,8 +36,6 @@ extern  unsigned char bus_8131_2;
 extern  unsigned char bus_8111_0;
 extern  unsigned char bus_8111_1;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 
 extern void get_bus_conf(void);
@@ -67,7 +67,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	pirq->version  = PIRQ_VERSION;
 	
 	pirq->rtr_bus = bus_8111_0;
-	pirq->rtr_devfn = ((sbdn+1)<<3)|0;
+	pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
 
 	pirq->exclusive_irqs = 0;
 	
@@ -81,7 +81,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	pirq_info = (void *) ( &pirq->checksum + 1);
 	slot_num = 0;
 //pci bridge
-	write_pirq_info(pirq_info, bus_8111_0, ((sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+	write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
 	pirq_info++; slot_num++;
 //pcix bridge
 //        write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c
index a2526c954f..e901416994 100644
--- a/src/mainboard/tyan/s2881/mptable.c
+++ b/src/mainboard/tyan/s2881/mptable.c
@@ -4,6 +4,8 @@
 #include <string.h>
 #include <stdint.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 extern  unsigned char bus_isa;
 extern  unsigned char bus_8131_0;
 extern  unsigned char bus_8131_1;
@@ -14,14 +16,10 @@ extern  unsigned apicid_8111;
 extern  unsigned apicid_8131_1;
 extern  unsigned apicid_8131_2;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 
 extern void get_bus_conf(void);
 
-
-
 void *smp_write_config_table(void *v)
 {
         static const char sig[4] = "PCMP";
@@ -100,7 +98,7 @@ void *smp_write_config_table(void *v)
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf);
 	
 //8111 LPC ????
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|0, apicid_8111, 0x13);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|0, apicid_8111, 0x13);
 
 //On Board AMD USB ???
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb
index 5ca7df6a34..9828e61c1e 100644
--- a/src/mainboard/tyan/s2885/Options.lb
+++ b/src/mainboard/tyan/s2885/Options.lb
@@ -63,6 +63,13 @@ uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
 uses LIFT_BSP_APIC_ID
 
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses CONFIG_LB_MEM_TOPK
+
 ###
 ### Build options
 ###
@@ -125,6 +132,18 @@ default CONFIG_LOGICAL_CPUS=1
 #CHIP_NAME ?
 default CONFIG_CHIP_NAME=1
 
+##HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0x0a
+
+##real SB Unit ID, default is 0x20, mean dont touch it at last
+default HT_CHAIN_END_UNITID_BASE=0x06
+
+#make the SB HT chain on bus 0, default is not (0)
+default SB_HT_CHAIN_ON_BUS0=2
+
+##only offset for SB chain?, default is yes(1)
+#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
 #1G memory hole
 default HW_MEM_HOLE_SIZEK=0x100000
 
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index 1e52e4e774..f4f30737ab 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -19,7 +19,7 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "northbridge/amd/amdk8/debug.c"
 #include "northbridge/amd/amdk8/incoherent_ht.c"
-#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/cpu_rev.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "cpu/amd/mtrr/amd_earlymtrr.c"
 #include "cpu/x86/bist.h"
diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c
index 13b66d8dc5..5d43c71f9a 100644
--- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c
@@ -13,7 +13,19 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+        int i;
+        for(i=0;i<0x80000;i++) {
+                outb(value, 0x80);
+        }
+#endif
+}
+#endif
+
 #include <cpu/amd/model_fxx_rev.h>
+
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
@@ -68,7 +80,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 	return smbus_read_byte(device, address);
 }
 
-#define K8_4RANK_DIMM_SUPPORT 1
+#define QRANK_DIMM_SUPPORT 1
 
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
@@ -113,9 +125,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 
         enumerate_ht_chain();
 
+        /* Setup the ck804 */
         amd8111_enable_rom();
 
         /* Is this a deliberate reset by the bios */
+//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal_x) {
                 goto normal_image;
         }
@@ -127,12 +141,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
                 goto fallback_image;
         }
  normal_image:
+//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
                 );
 
  fallback_image:
+//        post_code(0x25);
 	;
 }
 #endif
@@ -170,15 +186,22 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
 
+//	post_code(0x32);
 	
  	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
         console_init();
 
+//	dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
+	
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
 
         setup_s2885_resource_map();
+#if 0
+        dump_pci_device(PCI_DEV(0, 0x18, 0));
+	dump_pci_device(PCI_DEV(0, 0x19, 0));
+#endif
 
 	needs_reset = setup_coherent_ht_domain();
 
@@ -188,7 +211,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
         start_other_cores();
         wait_all_other_cores_started(bsp_apicid);
 #endif
-	
+
         needs_reset |= ht_setup_chains_x();
 
        	if (needs_reset) {
@@ -208,6 +231,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
         memreset_setup();
         sdram_initialize(nodes, ctrl);
 
+#if 0
+	dump_pci_devices();
+#endif
+
 	post_cache_as_ram();
 
 }
diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout
index 5eb88b9a5a..c1f3d75316 100644
--- a/src/mainboard/tyan/s2885/cmos.layout
+++ b/src/mainboard/tyan/s2885/cmos.layout
@@ -78,10 +78,10 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
 9     0     off
 9     1     87.5%
 9     2     75.0%
diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c
index 5e8e0bd347..68ed3d2e87 100644
--- a/src/mainboard/tyan/s2885/get_bus_conf.c
+++ b/src/mainboard/tyan/s2885/get_bus_conf.c
@@ -7,6 +7,7 @@
 #include <cpu/amd/dualcore.h>
 #endif
 
+#include <cpu/amd/amdk8_sysconf.h>
 
 // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
 //busnum is default
@@ -22,8 +23,7 @@ unsigned apicid_8111 ;
 unsigned apicid_8131_1;
 unsigned apicid_8131_2;
 
-unsigned sblk;
-unsigned pci1234[] = 
+unsigned pci1234x[] = 
 {        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
 	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
         0x0000ff0,
@@ -35,9 +35,7 @@ unsigned pci1234[] =
 //        0x0000ff0,
 //        0x0000ff0
 };
-unsigned hc_possible_num;
-unsigned sbdn;
-unsigned hcdn[] = 
+unsigned hcdnx[] = 
 { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
 	0x20202020,
 	0x20202020,
@@ -61,24 +59,29 @@ void get_bus_conf(void)
 	unsigned apicid_base;
 
         device_t dev;
+        int i;
 
-	if(get_bus_conf_done==1) return; //do it only once
+        if(get_bus_conf_done==1) return; //do it only once
 
-	get_bus_conf_done = 1;
+        get_bus_conf_done = 1;
 
-	hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);	
-	
-	get_sblk_pci1234();
+        sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+        for(i=0;i<sysconf.hc_possible_num; i++) {
+                sysconf.pci1234[i] = pci1234x[i];
+                sysconf.hcdn[i] = hcdnx[i];
+        }
+
+        get_sblk_pci1234();
 	
-	sbdn = (hcdn[0] >> 8) & 0xff;
-	sbdn3 = hcdn[0] & 0xff;
-	sbdn5 = hcdn[1] & 0xff;
+	sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
+	sbdn3 = sysconf.hcdn[0] & 0xff;
+	sbdn5 = sysconf.hcdn[1] & 0xff;
 
-	bus_8131_0 = (pci1234[0] >> 16) & 0xff;
+	bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff;
 	bus_8111_0 = bus_8131_0;
 
                 /* 8111 */
-        dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0));
+        dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
         if (dev) {
                 bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
 #if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE
@@ -95,11 +98,6 @@ void get_bus_conf(void)
         dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
         if (dev) {
                 bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
-                bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                bus_isa++;
-//              printk_debug("bus_isa=%d\n",bus_isa);
-#endif
         }
         else {
                 printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
@@ -109,6 +107,12 @@ void get_bus_conf(void)
         dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0));
         if (dev) {
                 bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
+                bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+                bus_isa++;
+//              printk_debug("bus_isa=%d\n",bus_isa);
+#endif
+
         }
         else {
                 printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
@@ -116,7 +120,7 @@ void get_bus_conf(void)
 
         /* HT chain 1 */
 	// it is on node0, so it must be there
-	bus_8151_0 = (pci1234[1] >> 16) & 0xff;
+	bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff;
         /* 8151 */
 	dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0));
 
diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c
index 59c3704c83..4fc12a04ac 100644
--- a/src/mainboard/tyan/s2885/irq_tables.c
+++ b/src/mainboard/tyan/s2885/irq_tables.c
@@ -10,6 +10,8 @@
 #include <stdint.h>
 #include <arch/pirq_routing.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
 		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
 		uint8_t slot, uint8_t rfu)
@@ -36,8 +38,6 @@ extern  unsigned char bus_8111_1;
 extern  unsigned char bus_8151_0;
 extern  unsigned char bus_8151_1;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 extern  unsigned sbdn5;
 
@@ -70,7 +70,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	pirq->version  = PIRQ_VERSION;
 	
 	pirq->rtr_bus = bus_8111_0;
-	pirq->rtr_devfn = ((sbdn+1)<<3)|0;
+	pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
 
 	pirq->exclusive_irqs = 0;
 	
@@ -84,7 +84,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	pirq_info = (void *) ( &pirq->checksum + 1);
 	slot_num = 0;
 //pci bridge
-	write_pirq_info(pirq_info, bus_8111_0, ((sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+	write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
 	pirq_info++; slot_num++;
 //pcix bridge
 //        write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c
index 83cbaf0e18..b126d2f60d 100644
--- a/src/mainboard/tyan/s2885/mptable.c
+++ b/src/mainboard/tyan/s2885/mptable.c
@@ -4,6 +4,8 @@
 #include <string.h>
 #include <stdint.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 extern  unsigned char bus_isa;
 extern  unsigned char bus_8131_0;
 extern  unsigned char bus_8131_1;
@@ -16,8 +18,6 @@ extern  unsigned apicid_8111;
 extern  unsigned apicid_8131_1;
 extern  unsigned apicid_8131_2;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 extern  unsigned sbdn5;
 
@@ -99,9 +99,9 @@ void *smp_write_config_table(void *v)
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  bus_isa, 0xe, apicid_8111, 0xe);
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  bus_isa, 0xf, apicid_8111, 0xf);
 //??? What
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|3, apicid_8111, 0x13);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13);
 //Onboard AMD AC97 Audio 
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|1, apicid_8111, 0x11);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|1, apicid_8111, 0x11);
 // Onboard AMD USB
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
 
diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb
index 67c7b3c8a9..f23e75b7e2 100644
--- a/src/mainboard/tyan/s2891/Config.lb
+++ b/src/mainboard/tyan/s2891/Config.lb
@@ -314,8 +314,8 @@ chip northbridge/amd/amdk8/root_complex
 					#	chip drivers/ati/ragexl
                                                 chip drivers/pci/onboard
                                                         device pci 7.0 on end
-                                               #         register "rom_address" = "0xfff80000" #for 512K
-							register "rom_address" = "0xfff00000" #for 1M
+                                                        register "rom_address" = "0xfff80000" #for 512K
+					#		register "rom_address" = "0xfff00000" #for 1M
                                                 end
 					end
                 			device pci a.0 off end # NIC
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
index 366b745151..933390b025 100644
--- a/src/mainboard/tyan/s2891/Options.lb
+++ b/src/mainboard/tyan/s2891/Options.lb
@@ -54,7 +54,6 @@ uses CONFIG_CHIP_NAME
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
 uses HW_MEM_HOLE_SIZEK
-uses K8_HT_FREQ_1G_SUPPORT
 
 uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
@@ -74,12 +73,13 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
 uses CONFIG_LB_MEM_TOPK
 
+
 ## ROM_SIZE is the size of boot ROM that this board will use.
 #512K bytes 
-#default ROM_SIZE=524288
+default ROM_SIZE=524288
 
 #1M bytes
-default ROM_SIZE=1048576
+#default ROM_SIZE=1048576
 
 
 ##
@@ -139,9 +139,6 @@ default CONFIG_LOGICAL_CPUS=1
 #1G memory hole
 default HW_MEM_HOLE_SIZEK=0x100000
 
-#Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-
 ##HT Unit ID offset, default is 1, the typical one
 default HT_CHAIN_UNITID_BASE=0x0
 
@@ -152,8 +149,7 @@ default HT_CHAIN_UNITID_BASE=0x0
 default SB_HT_CHAIN_ON_BUS0=2
 
 ##only offset for SB chain?, default is yes(1)
-default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
+#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
 #BTEXT Console
 #default CONFIG_CONSOLE_BTEXT=1
@@ -229,8 +225,8 @@ default CONFIG_ROM_STREAM = 1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CROSS_COMPILE)gcc-3.3.6 -m32"
+default HOSTCC="gcc-3.3.6"
 
 ##
 ## Disable the gdb stub by default
diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c
index e772a1ab62..be81f89e11 100644
--- a/src/mainboard/tyan/s2891/auto.c
+++ b/src/mainboard/tyan/s2891/auto.c
@@ -12,7 +12,7 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
-#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/cpu_rev.c"
 #define K8_HT_FREQ_1G_SUPPORT 0
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c
index b83839a19c..aceffc33fa 100644
--- a/src/mainboard/tyan/s2891/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c
@@ -2,7 +2,7 @@
 #define __ROMCC__
 
 //used by raminit
-#define K8_4RANK_DIMM_SUPPORT 1
+#define QRANK_DIMM_SUPPORT 1
 
 #if CONFIG_LOGICAL_CPUS==1
 #define SET_NB_CFG_54 1
@@ -21,7 +21,19 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+        int i;
+        for(i=0;i<0x80000;i++) {
+                outb(value, 0x80);
+        }
+#endif
+}
+#endif
+
 #include <cpu/amd/model_fxx_rev.h>
+
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
@@ -42,6 +54,7 @@
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
 
+
 static void memreset_setup(void)
 {
 }
@@ -92,15 +105,21 @@ static void sio_setup(void)
         uint32_t dword;
         uint8_t byte;
 
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+        /* subject decoding*/
+        byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
         byte |= 0x20;
         pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
 
+        /* LPC Positive Decode 0 */
         dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
+        /* Serial 0, Serial 1 */
         dword |= (1<<0) | (1<<1);
         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
 
 #if 1   
+        /* s2891 has onboard LPC port 80 */
+        /*Hope I can enable port 80 here 
+         It will decode port 80 to LPC, If you are using PCI post code you can not do this */
         dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4);
         dword |= (1<<16);  
         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
@@ -133,6 +152,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
         ck804_enable_rom();
 
         /* Is this a deliberate reset by the bios */
+//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal_x) {
                 goto normal_image;
         }
@@ -144,12 +164,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
                 goto fallback_image;
         }
  normal_image:
+//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist) , "b" (cpu_init_detectedx)/* inputs */
                 );
 
  fallback_image:
+//        post_code(0x25);
 	;
 }
 #endif
@@ -187,6 +209,8 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
 
+//	post_code(0x32);
+	
  	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
         console_init();
@@ -195,6 +219,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	report_bist_failure(bist);
 
         setup_s2891_resource_map();
+#if 0
+        dump_pci_device(PCI_DEV(0, 0x18, 0));
+	dump_pci_device(PCI_DEV(0, 0x19, 0));
+#endif
 
 	needs_reset = setup_coherent_ht_domain();
 
@@ -211,7 +239,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
        	if (needs_reset) {
                	print_info("ht reset -\r\n");
-               	soft_reset();
+//               	soft_reset();
        	}
 
         allow_all_aps_stop(bsp_apicid);
@@ -221,9 +249,23 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
         fill_mem_ctrl(nodes, ctrl, spd_addr);
 
 	enable_smbus();
+#if 0
+	dump_spd_registers(&cpu[0]);
+#endif
+#if 0
+	dump_smbus_registers();
+#endif
 
 	memreset_setup();
 	sdram_initialize(nodes, ctrl);
 
+#if 0
+        print_pci_devices();
+#endif
+
+#if 0
+	dump_pci_devices();
+#endif
+
 	post_cache_as_ram();
 }
diff --git a/src/mainboard/tyan/s2891/cmos.layout b/src/mainboard/tyan/s2891/cmos.layout
index 5eb88b9a5a..c1f3d75316 100644
--- a/src/mainboard/tyan/s2891/cmos.layout
+++ b/src/mainboard/tyan/s2891/cmos.layout
@@ -78,10 +78,10 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
 9     0     off
 9     1     87.5%
 9     2     75.0%
diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c
index aeb1ef4473..8093f96332 100644
--- a/src/mainboard/tyan/s2891/get_bus_conf.c
+++ b/src/mainboard/tyan/s2891/get_bus_conf.c
@@ -7,6 +7,7 @@
 #include <cpu/amd/dualcore.h>
 #endif
 
+#include <cpu/amd/amdk8_sysconf.h>
 
 // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
 //busnum is default
@@ -24,9 +25,9 @@
         unsigned apicid_ck804;
         unsigned apicid_8131_1;
         unsigned apicid_8131_2;
+	
 
-unsigned sblk;
-unsigned pci1234[] = 
+unsigned pci1234x[] = 
 {        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
 	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
         0x0000000,
@@ -38,9 +39,7 @@ unsigned pci1234[] =
 //        0x0000ff0,
 //        0x0000ff0
 };
-unsigned hc_possible_num;
-unsigned sbdn;
-unsigned hcdn[] = 
+unsigned hcdnx[] = 
 { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
 	0x20202020,
 	0x20202020,
@@ -65,27 +64,27 @@ void get_bus_conf(void)
 	unsigned apicid_base;
 
         device_t dev;
+	unsigned sbdn;
+        int i;
 
-	if(get_bus_conf_done==1) return; //do it only once
+        if(get_bus_conf_done==1) return; //do it only once
 
-	get_bus_conf_done = 1;
+        get_bus_conf_done = 1;
 
-	hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);	
-	
-	get_sblk_pci1234();
-	
-	sbdn = (hcdn[0] & 0xff); // first byte of first chain
+        sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+        for(i=0;i<sysconf.hc_possible_num; i++) {
+                sysconf.pci1234[i] = pci1234x[i];
+                sysconf.hcdn[i] = hcdnx[i];
+        }
 
-	sbdn3 = (hcdn[1] & 0xff); // first byte of second chain
+        get_sblk_pci1234();
+	
+	sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+	sbdn = sysconf.sbdn;
 
-//	bus_ck804_0 = node_link_to_bus(0, sblk);
-	bus_ck804_0 = (pci1234[0] >> 16) & 0xff;
-
-        if(pci1234[2] & 1) {
-		bus_coproc_0 = (pci1234[2] >> 16) & 0xff;
-		coprocdn =  (hcdn[2] & 0xff);
-        }
+	sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain
 
+	bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff;
 
 
                 /* CK804 */
@@ -153,16 +152,14 @@ void get_bus_conf(void)
                 dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0));
                 if (dev) {
                         bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_8131_0++;
-                        bus_isa = bus_8131_0; // incase only one installed
+                        bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+                        bus_isa++;
                 }
                 else {
                         printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e);
-
                 }
 
-		bus_8131_0 = (pci1234[1] >> 16) & 0xff;
+		bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff;
 
                 /* 8131-1 */
                 dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
@@ -191,7 +188,11 @@ void get_bus_conf(void)
                         bus_isa = bus_8131_1+2;
                 }
 
-
+		if(sysconf.pci1234[2] & 1) {
+			bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff;
+			coprocdn =  (sysconf.hcdn[2] & 0xff);
+		}
+		
 
 /*I/O APICs:	APIC ID	Version	State		Address*/
 #if CONFIG_LOGICAL_CPUS==1
diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c
index b051989532..f694c85924 100644
--- a/src/mainboard/tyan/s2891/irq_tables.c
+++ b/src/mainboard/tyan/s2891/irq_tables.c
@@ -10,6 +10,8 @@
 #include <stdint.h>
 #include <arch/pirq_routing.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
 		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
 		uint8_t slot, uint8_t rfu)
@@ -40,10 +42,7 @@ extern  unsigned char bus_8131_1;//8
 extern  unsigned char bus_8131_2;//9
 extern  unsigned char bus_coproc_0;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
-extern  unsigned pci1234[];
 extern unsigned coprocdn;
 
 extern void get_bus_conf(void);
@@ -58,8 +57,10 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 
         uint8_t sum=0;
         int i;
+	unsigned sbdn;
 
-       get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+        get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+	sbdn = sysconf.sbdn;
 
         /* Align the table to be 16 byte aligned. */
         addr += 15;
@@ -94,12 +95,11 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 //pcix bridge
         write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
         pirq_info++; slot_num++;
-
 //co processor
-        if(pci1234[2] & 1) {
-                write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-                pirq_info++; slot_num++;
-        }
+        if(sysconf.pci1234[2] & 1) {
+	        write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+	        pirq_info++; slot_num++;
+	}
              
 #if 0
 //smbus
diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c
index 8e4be7d061..b383aae2b7 100644
--- a/src/mainboard/tyan/s2891/mptable.c
+++ b/src/mainboard/tyan/s2891/mptable.c
@@ -4,6 +4,8 @@
 #include <string.h>
 #include <stdint.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 extern  unsigned char bus_isa;
 extern  unsigned char bus_ck804_0; //1
 extern  unsigned char bus_ck804_1; //2
@@ -18,8 +20,6 @@ extern  unsigned apicid_ck804;
 extern  unsigned apicid_8131_1;
 extern  unsigned apicid_8131_2;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 
 extern void get_bus_conf(void);
@@ -30,6 +30,7 @@ void *smp_write_config_table(void *v)
         static const char oem[8] = "TYAN    ";
         static const char productid[12] = "S2891       ";
         struct mp_config_table *mc;
+	unsigned sbdn;
 
         unsigned char bus_num;
 	int i;
@@ -54,6 +55,7 @@ void *smp_write_config_table(void *v)
         smp_write_processors(mc);
 
 	get_bus_conf();
+	sbdn = sysconf.sbdn;
 
 /*Bus:		Bus ID	Type*/
        /* define bus and isa numbers */
@@ -75,6 +77,7 @@ void *smp_write_config_table(void *v)
 				smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
 			}
         
+	/* Initialize interrupt mapping*/
 
 			dword = 0x0000d218;
 	        	pci_write_config32(dev, 0x7c, dword);
@@ -83,7 +86,6 @@ void *smp_write_config_table(void *v)
 		        pci_write_config32(dev, 0x80, dword);
 
 	        	dword = 0x0000007d;
-
 		        pci_write_config32(dev, 0x84, dword);
 
                 }
diff --git a/src/mainboard/tyan/s2891/resourcemap.c b/src/mainboard/tyan/s2891/resourcemap.c
index 625e19f11c..ad559b2ded 100644
--- a/src/mainboard/tyan/s2891/resourcemap.c
+++ b/src/mainboard/tyan/s2891/resourcemap.c
@@ -258,8 +258,8 @@ static void setup_s2891_resource_map(void)
 		 *	   This field defines the highest bus number in configuration region i
 		 */
 #if 1
-//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, 
-//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, 
+//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
+//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
 		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, 
 		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, 
 #endif
diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
index 6fa8e5d44a..dcb0c45abf 100644
--- a/src/mainboard/tyan/s2892/Config.lb
+++ b/src/mainboard/tyan/s2892/Config.lb
@@ -313,8 +313,7 @@ chip northbridge/amd/amdk8/root_complex
 					#	chip drivers/ati/ragexl
 						chip drivers/pci/onboard
 							device pci 6.0 on end
-                                                #       register "rom_address" = "0xfff80000" #for 512K
-                                                        register "rom_address" = "0xfff00000" #for 1M
+							register "rom_address" = "0xfff80000"
 						end
                                                 chip drivers/pci/onboard
                                                         device pci 8.0 on end
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
index 30e6d617c2..92ebe2e738 100644
--- a/src/mainboard/tyan/s2892/Options.lb
+++ b/src/mainboard/tyan/s2892/Options.lb
@@ -54,7 +54,6 @@ uses CONFIG_CHIP_NAME
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
 uses HW_MEM_HOLE_SIZEK
-uses K8_HT_FREQ_1G_SUPPORT
 
 uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
@@ -66,12 +65,14 @@ uses HT_CHAIN_END_UNITID_BASE
 uses SB_HT_CHAIN_ON_BUS0
 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
+uses CONFIG_LB_MEM_TOPK
+
 ## ROM_SIZE is the size of boot ROM that this board will use.
 #512K bytes 
-#default ROM_SIZE=524288
+default ROM_SIZE=524288
 
 #1M bytes
-default ROM_SIZE=1048576
+#default ROM_SIZE=1048576
 
 
 ##
@@ -128,12 +129,6 @@ default CONFIG_MAX_CPUS=4
 default CONFIG_MAX_PHYSICAL_CPUS=2
 default CONFIG_LOGICAL_CPUS=1
 
-#1G memory hole
-default HW_MEM_HOLE_SIZEK=0x100000
-
-#Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-
 ##HT Unit ID offset, default is 1, the typical one
 default HT_CHAIN_UNITID_BASE=0x0
 
@@ -146,6 +141,9 @@ default SB_HT_CHAIN_ON_BUS0=2
 ##only offset for SB chain?, default is yes(1)
 default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
+#1G memory hole
+default HW_MEM_HOLE_SIZEK=0x100000
+
 #BTEXT Console
 #default CONFIG_CONSOLE_BTEXT=1
 
@@ -161,6 +159,7 @@ default DCACHE_RAM_BASE=0xcf000
 default DCACHE_RAM_SIZE=0x1000
 default CONFIG_USE_INIT=0
 
+
 ##
 ## Build code to setup a generic IOAPIC
 ##
diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c
index 07d7b5ec8b..1d19ecfafc 100644
--- a/src/mainboard/tyan/s2892/auto.c
+++ b/src/mainboard/tyan/s2892/auto.c
@@ -12,7 +12,7 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
-#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/cpu_rev.c"
 #define K8_HT_FREQ_1G_SUPPORT 1
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
index 5dd43e8bbc..4b63ffed4e 100644
--- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
@@ -13,6 +13,17 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+        int i;
+        for(i=0;i<0x80000;i++) {
+                outb(value, 0x80);
+        }
+#endif
+}
+#endif
+
 #include <cpu/amd/model_fxx_rev.h>
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
@@ -54,7 +65,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 	return smbus_read_byte(device, address);
 }
 
-#define K8_4RANK_DIMM_SUPPORT 1
+#define QRANK_DIMM_SUPPORT 1
 
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
@@ -98,7 +109,7 @@ static void sio_setup(void)
         uint32_t dword;
         uint8_t byte;
 
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+        byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
         byte |= 0x20;
         pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
 
@@ -106,7 +117,6 @@ static void sio_setup(void)
         dword |= (1<<0);
         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
 
-
 }
 void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -132,6 +142,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
         ck804_enable_rom();
 
         /* Is this a deliberate reset by the bios */
+//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal_x) {
                 goto normal_image;
         }
@@ -143,12 +154,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
                 goto fallback_image;
         }
  normal_image:
+//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
                 );
  
  fallback_image:
+//        post_code(0x25);
 	;
 }
 #endif
@@ -167,46 +180,42 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-	static const struct mem_controller cpu[] = {
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
+
+        static const uint16_t spd_addr [] = {
+                        (0xa<<3)|0, (0xa<<3)|2, 0, 0,
+                        (0xa<<3)|1, (0xa<<3)|3, 0, 0,
 #if CONFIG_MAX_PHYSICAL_CPUS > 1
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
+                        (0xa<<3)|4, (0xa<<3)|6, 0, 0,
+                        (0xa<<3)|5, (0xa<<3)|7, 0, 0,
 #endif
-	};
+        };
 
-	unsigned bsp_apicid = 0;
         int needs_reset;
+        unsigned bsp_apicid = 0;
+
+        struct mem_controller ctrl[8];
+        unsigned nodes;
 
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
 
- 	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+//	post_code(0x32);
+
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
         console_init();
-	
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
+
+        /* Halt if there was a built in self test failure */
+        report_bist_failure(bist);
 
         setup_s2892_resource_map();
+#if 0
+        dump_pci_device(PCI_DEV(0, 0x18, 0));
+        dump_pci_device(PCI_DEV(0, 0x19, 0));
+#endif
 
-	needs_reset = setup_coherent_ht_domain();
+        needs_reset = setup_coherent_ht_domain();
 
         wait_all_core0_started();
 #if CONFIG_LOGICAL_CPUS==1
@@ -219,15 +228,35 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
         needs_reset |= ck804_early_setup_x();
 
-       	if (needs_reset) {
-               	print_info("ht reset -\r\n");
-               	soft_reset();
-       	}
+        if (needs_reset) {
+                print_info("ht reset -\r\n");
+                soft_reset();
+        }
+
+        allow_all_aps_stop(bsp_apicid);
+
+        nodes = get_nodes();
+        //It's the time to set ctrl now;
+        fill_mem_ctrl(nodes, ctrl, spd_addr);
+
+        enable_smbus();
+#if 0
+        dump_spd_registers(&cpu[0]);
+#endif
+#if 0
+        dump_smbus_registers();
+#endif
 
-	enable_smbus();
+        memreset_setup();
+        sdram_initialize(nodes, ctrl);
 
-	memreset_setup();
-	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+#if 0
+        print_pci_devices();
+#endif
+
+#if 0
+        dump_pci_devices();
+#endif
 
-	post_cache_as_ram();
+        post_cache_as_ram();
 }
diff --git a/src/mainboard/tyan/s2892/cmos.layout b/src/mainboard/tyan/s2892/cmos.layout
index 5eb88b9a5a..c1f3d75316 100644
--- a/src/mainboard/tyan/s2892/cmos.layout
+++ b/src/mainboard/tyan/s2892/cmos.layout
@@ -78,10 +78,10 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
 9     0     off
 9     1     87.5%
 9     2     75.0%
diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c
index 6086aa5ff5..2e8a5cd337 100644
--- a/src/mainboard/tyan/s2892/get_bus_conf.c
+++ b/src/mainboard/tyan/s2892/get_bus_conf.c
@@ -7,6 +7,7 @@
 #include <cpu/amd/dualcore.h>
 #endif
 
+#include <cpu/amd/amdk8_sysconf.h>
 
 // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
 //busnum is default
@@ -24,8 +25,7 @@
         unsigned apicid_8131_1;
         unsigned apicid_8131_2;
 
-unsigned sblk;
-unsigned pci1234[] = 
+unsigned pci1234x[] = 
 {        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
 	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
         0x0000ff0,
@@ -37,9 +37,7 @@ unsigned pci1234[] =
 //        0x0000ff0,
 //        0x0000ff0
 };
-unsigned hc_possible_num;
-unsigned sbdn;
-unsigned hcdn[] = 
+unsigned hcdnx[] = 
 { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
 	0x20202020,
 	0x20202020,
@@ -61,23 +59,29 @@ void get_bus_conf(void)
 {
 
 	unsigned apicid_base;
+	unsigned sbdn;
 
         device_t dev;
+        int i;
 
-	if(get_bus_conf_done==1) return; //do it only once
+        if(get_bus_conf_done==1) return; //do it only once
 
-	get_bus_conf_done = 1;
+        get_bus_conf_done = 1;
 
-	hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);	
-	
-	get_sblk_pci1234();
+        sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+        for(i=0;i<sysconf.hc_possible_num; i++) {
+                sysconf.pci1234[i] = pci1234x[i];
+                sysconf.hcdn[i] = hcdnx[i];
+        }
+
+        get_sblk_pci1234();
 	
-	sbdn = (hcdn[0] & 0xff); // first byte of first chain
+	sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+	sbdn = sysconf.sbdn;
 
-	sbdn3 = (hcdn[1] & 0xff); // first byte of second chain
+	sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain
 
-//	bus_ck804_0 = node_link_to_bus(0, sblk);
-	bus_ck804_0 = (pci1234[0] >> 16) & 0xff;
+	bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff;
 
 
                 /* CK804 */
@@ -145,16 +149,15 @@ void get_bus_conf(void)
                 dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0));
                 if (dev) {
                         bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_8131_0++;
-                        bus_isa = bus_8131_0; // incase only one installed
+                        bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+                        bus_isa++;
                 }
                 else {
                         printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e);
-
                 }
 
-		bus_8131_0 = (pci1234[1] >> 16) & 0xff;
+		bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff;
+
                 /* 8131-1 */
                 dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
                 if (dev) {
diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c
index b4d61aaaea..a1b2b2ed37 100644
--- a/src/mainboard/tyan/s2892/irq_tables.c
+++ b/src/mainboard/tyan/s2892/irq_tables.c
@@ -10,6 +10,8 @@
 #include <stdint.h>
 #include <arch/pirq_routing.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
 		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
 		uint8_t slot, uint8_t rfu)
@@ -39,8 +41,6 @@ extern  unsigned char bus_8131_0;//7
 extern  unsigned char bus_8131_1;//8
 extern  unsigned char bus_8131_2;//9
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 
 extern void get_bus_conf(void);
@@ -52,11 +52,13 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	struct irq_info *pirq_info;
 	unsigned slot_num;
 	uint8_t *v;
+	unsigned sbdn;
 
         uint8_t sum=0;
         int i;
 
        get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+	sbdn = sysconf.sbdn;
 
         /* Align the table to be 16 byte aligned. */
         addr += 15;
diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c
index e0f16d8921..4828453741 100644
--- a/src/mainboard/tyan/s2892/mptable.c
+++ b/src/mainboard/tyan/s2892/mptable.c
@@ -4,6 +4,8 @@
 #include <string.h>
 #include <stdint.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 extern  unsigned char bus_isa;
 extern  unsigned char bus_ck804_0; //1
 extern  unsigned char bus_ck804_1; //2
@@ -18,8 +20,6 @@ extern  unsigned apicid_ck804;
 extern  unsigned apicid_8131_1;
 extern  unsigned apicid_8131_2;
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 
 
@@ -29,6 +29,7 @@ void *smp_write_config_table(void *v)
         static const char oem[8] = "TYAN    ";
         static const char productid[12] = "S2892       ";
         struct mp_config_table *mc;
+	unsigned sbdn;
 
         unsigned char bus_num;
 	int i;
@@ -53,6 +54,7 @@ void *smp_write_config_table(void *v)
         smp_write_processors(mc);
 
 	get_bus_conf();
+	sbdn = sysconf.sbdn;
 
 /*Bus:		Bus ID	Type*/
        /* define bus and isa numbers */
@@ -74,11 +76,12 @@ void *smp_write_config_table(void *v)
 				smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
 			}
         
+	/* Initialize interrupt mapping*/
+
 			dword = 0x0000d218;
 	        	pci_write_config32(dev, 0x7c, dword);
 
 		        dword = 0x12008a00;
-
 		        pci_write_config32(dev, 0x80, dword);
 
 	        	dword = 0x0000007d;
diff --git a/src/mainboard/tyan/s2892/resourcemap.c b/src/mainboard/tyan/s2892/resourcemap.c
index 5801264a16..b7d72db90e 100644
--- a/src/mainboard/tyan/s2892/resourcemap.c
+++ b/src/mainboard/tyan/s2892/resourcemap.c
@@ -258,8 +258,8 @@ static void setup_s2892_resource_map(void)
 		 *	   This field defines the highest bus number in configuration region i
 		 */
 #if 1
-//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, 
-//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, 
+//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
+//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
 		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, 
 		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, 
 #endif
diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
index 6b41829017..9afaf70d8f 100644
--- a/src/mainboard/tyan/s2895/Config.lb
+++ b/src/mainboard/tyan/s2895/Config.lb
@@ -2,12 +2,17 @@
 ## Compute the location and size of where this firmware image
 ## (linuxBIOS plus bootloader) will live in the boot rom chip.
 ##
-if USE_FALLBACK_IMAGE
-	default ROM_SECTION_SIZE   = FALLBACK_SIZE
-	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+if USE_FAILOVER_IMAGE
+	default ROM_SECTION_SIZE   = FAILOVER_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
 else
-	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+    if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+    else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
 	default ROM_SECTION_OFFSET = 0
+    end
 end
 
 ##
@@ -16,7 +21,6 @@ end
 ##
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-default CONFIG_ROM_STREAM     = 1
 
 ##
 ## Compute where this copy of linuxBIOS will start in the boot rom
@@ -31,10 +35,18 @@ default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
 ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
 ##
 default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
 
-arch i386 end 
+if USE_FAILOVER_IMAGE
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+else
+    if USE_FALLBACK_IMAGE
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
+    else
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+    end
+end
 
+arch i386 end 
 
 ##
 ## Build the objects we have code for in this directory.
@@ -92,9 +104,16 @@ end
 ##
 ## Build our 16 bit and 32 bit linuxBIOS entry code
 ##
-if USE_FALLBACK_IMAGE
-        mainboardinit cpu/x86/16bit/entry16.inc
-        ldscript /cpu/x86/16bit/entry16.lds
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	mainboardinit cpu/x86/16bit/entry16.inc
+	ldscript /cpu/x86/16bit/entry16.lds
+    end
+else
+    if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/entry16.inc
+	ldscript /cpu/x86/16bit/entry16.lds
+    end
 end
 
 mainboardinit cpu/x86/32bit/entry32.inc
@@ -113,12 +132,22 @@ end
 ##
 ## Build our reset vector (This is where linuxBIOS is entered)
 ##
-if USE_FALLBACK_IMAGE 
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE 
 	mainboardinit cpu/x86/16bit/reset16.inc 
 	ldscript /cpu/x86/16bit/reset16.lds 
+    else
+	mainboardinit cpu/x86/32bit/reset32.inc 
+	ldscript /cpu/x86/32bit/reset32.lds 
+    end
 else
+    if USE_FALLBACK_IMAGE 
+	mainboardinit cpu/x86/16bit/reset16.inc 
+	ldscript /cpu/x86/16bit/reset16.lds 
+    else
 	mainboardinit cpu/x86/32bit/reset32.inc 
 	ldscript /cpu/x86/32bit/reset32.lds 
+    end
 end
 
 if USE_DCACHE_RAM
@@ -136,13 +165,18 @@ ldscript /southbridge/nvidia/ck804/id.lds
 ##
 ## ROMSTRAP table for CK804
 ##
-if USE_FALLBACK_IMAGE
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE 
 	mainboardinit southbridge/nvidia/ck804/romstrap.inc
 	ldscript /southbridge/nvidia/ck804/romstrap.lds
+    end
+else
+    if USE_FALLBACK_IMAGE 
+	mainboardinit southbridge/nvidia/ck804/romstrap.inc
+	ldscript /southbridge/nvidia/ck804/romstrap.lds
+    end
 end
 
-
-
 if USE_DCACHE_RAM
 	##
 	## Setup Cache-As-Ram
@@ -155,12 +189,20 @@ end
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover_failover.lds
+	end
+    end
+else
+    if USE_FALLBACK_IMAGE
 	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover.lds
 	else
-	        mainboardinit ./failover.inc
+		mainboardinit ./failover.inc
 	end
+    end
 end
 
 ##
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
index cd367ad029..b1ee5367e8 100644
--- a/src/mainboard/tyan/s2895/Options.lb
+++ b/src/mainboard/tyan/s2895/Options.lb
@@ -2,6 +2,8 @@ uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
 uses HAVE_FALLBACK_BOOT
+uses USE_FAILOVER_IMAGE
+uses HAVE_FAILOVER_BOOT
 uses HAVE_HARD_RESET
 uses IRQ_SLOT_COUNT
 uses HAVE_OPTION_TABLE
@@ -11,6 +13,7 @@ uses CONFIG_LOGICAL_CPUS
 uses CONFIG_IOAPIC
 uses CONFIG_SMP
 uses FALLBACK_SIZE
+uses FAILOVER_SIZE
 uses ROM_SIZE
 uses ROM_SECTION_SIZE
 uses ROM_IMAGE_SIZE
@@ -60,6 +63,8 @@ uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
 
+uses SERIAL_CPU_INIT
+
 uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
 uses LIFT_BSP_APIC_ID
@@ -69,28 +74,34 @@ uses HT_CHAIN_END_UNITID_BASE
 uses SB_HT_CHAIN_ON_BUS0
 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
+uses CONFIG_LB_MEM_TOPK
+
 ## ROM_SIZE is the size of boot ROM that this board will use.
 #512K bytes 
-#default ROM_SIZE=524288
+default ROM_SIZE=524288
 
 #1M bytes
-default ROM_SIZE=1048576
+#default ROM_SIZE=1048576
 
 ##
 ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
 ##
 #default FALLBACK_SIZE=131072
-#256K
-default FALLBACK_SIZE=0x40000
+#default FALLBACK_SIZE=0x40000
 
-###
-### Build options
-###
+#FALLBACK: 256K-4K
+default FALLBACK_SIZE=0x3f000
+#FAILOVER: 4K
+default FAILOVER_SIZE=0x01000
+
+#more 1M for pgtbl
+default CONFIG_LB_MEM_TOPK=2048
 
 ##
 ## Build code for the fallback boot
 ##
 default HAVE_FALLBACK_BOOT=1
+default HAVE_FAILOVER_BOOT=1
 
 ##
 ## Build code to reset the motherboard from linuxBIOS
@@ -130,15 +141,14 @@ default CONFIG_MAX_CPUS=4
 default CONFIG_MAX_PHYSICAL_CPUS=2
 default CONFIG_LOGICAL_CPUS=1
 
+default SERIAL_CPU_INIT=0
+
 #CHIP_NAME ?
 #default CONFIG_CHIP_NAME=1
 
 #1G memory hole
 default HW_MEM_HOLE_SIZEK=0x100000
 
-#Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
-
 ##HT Unit ID offset, default is 1, the typical one
 default HT_CHAIN_UNITID_BASE=0x0
 
@@ -151,6 +161,9 @@ default SB_HT_CHAIN_ON_BUS0=2
 ##only offset for SB chain?, default is yes(1)
 default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
+#Opteron K8 1G HT Support
+default K8_HT_FREQ_1G_SUPPORT=1
+
 #VGA
 default CONFIG_CONSOLE_VGA=1
 default CONFIG_PCI_ROM_RUN=1
@@ -163,7 +176,7 @@ default DCACHE_RAM_BASE=0xcf000
 default DCACHE_RAM_SIZE=0x1000
 default CONFIG_USE_INIT=0
 
-default ENABLE_APIC_EXT_ID=1
+default ENABLE_APIC_EXT_ID=0
 default APIC_ID_OFFSET=0x10
 default LIFT_BSP_APIC_ID=0
 
@@ -201,12 +214,12 @@ default HEAP_SIZE=0x4000
 ##
 ## Only use the option table in a normal image
 ##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
 
 ##
 ## LinuxBIOS C code runs at this location in RAM
 ##
-default _RAMBASE=0x00004000
+default _RAMBASE=0x00100000
 
 ##
 ## Load the payload from the ROM
@@ -220,8 +233,8 @@ default CONFIG_ROM_STREAM = 1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CROSS_COMPILE)gcc-4.0.2 -m32"
+default HOSTCC="gcc-4.0.2"
 
 ##
 ## Disable the gdb stub by default
diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c
index 5bfc6bf680..8c11f30fa7 100644
--- a/src/mainboard/tyan/s2895/auto.c
+++ b/src/mainboard/tyan/s2895/auto.c
@@ -13,7 +13,7 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
-#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/cpu_rev.c"
 //#define K8_HT_FREQ_1G_SUPPORT 1
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
@@ -23,7 +23,7 @@
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_msr.h>
+#include "cpu/amd/model_fxx/model_fxx_msr.h"
 #include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
 
 #include "cpu/amd/mtrr/amd_earlymtrr.c"
diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c
index 299f345b71..576bebebfa 100644
--- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c
@@ -6,7 +6,7 @@
 //#define K8_SCAN_PCI_BUS 1
 
 
-#define K8_4RANK_DIMM_SUPPORT 1
+#define QRANK_DIMM_SUPPORT 1
 
 #if CONFIG_LOGICAL_CPUS==1
 #define SET_NB_CFG_54 1
@@ -21,30 +21,53 @@
 #include <cpu/x86/lapic.h>
 #include "option_table.h"
 #include "pc80/mc146818rtc_early.c"
+
+#if USE_FAILOVER_IMAGE==0
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+        int i;
+        for(i=0;i<0x8000;i++) {
+                outb(value, 0x80);
+        }
+#endif
+}
+#endif
+
 #include <cpu/amd/model_fxx_rev.h>
+
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/nvidia/ck804/ck804_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/amd/model_fxx/apic_timer.c"
 #include "lib/delay.c"
 
-#if CONFIG_USE_INIT == 0
-#include "lib/memcpy.c"
 #endif
 
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
 #include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
+#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
+#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
+
+#define SUPERIO_GPIO_IO_BASE 0x400
+
+#if USE_FAILOVER_IMAGE==0
 
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
 #include "cpu/x86/bist.h"
 
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+
+#include "northbridge/amd/amdk8/debug.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+
 
 #include "northbridge/amd/amdk8/setup_resource_map.c"
 
@@ -58,9 +81,6 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
 {
 }
 
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
 
 static void sio_gpio_setup(void){
 
@@ -94,6 +114,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "cpu/amd/dualcore/dualcore.c"
 
 #define CK804_NUM 2
+#define CK804B_BUSN 0x80
 #define CK804_USE_NIC 1
 #define CK804_USE_ACI 1
 
@@ -116,8 +137,9 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
+#endif
 
-#if USE_FALLBACK_IMAGE == 1
+#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
 
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
@@ -133,7 +155,7 @@ static void sio_setup(void)
         
         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
         
-        byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+        byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
         byte |= 0x20; 
         pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
         
@@ -141,13 +163,14 @@ static void sio_setup(void)
         dword |= (1<<29)|(1<<0);
         pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
         
-#if  1  
+        dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4);
+        dword |= (1<<16);
+        pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
+
         lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
-                
         value =  lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
         value &= 0xbf; 
         lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
-#endif
 
 }
 
@@ -175,6 +198,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
         ck804_enable_rom();
 
         /* Is this a deliberate reset by the bios */
+//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal_x) {
                 goto normal_image;
         }
@@ -186,28 +210,43 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
                 goto fallback_image;
         }
  normal_image:
+//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
                 );
 
  fallback_image:
+//        post_code(0x25);
+#if HAVE_FAILOVER_BOOT==1
+        __asm__ volatile ("jmp __fallback_image"
+                : /* outputs */
+                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+                )
+#endif
 	;
 }
 #endif
-
 void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
+#if HAVE_FAILOVER_BOOT==1 
+    #if USE_FAILOVER_IMAGE==1
+	failover_process(bist, cpu_init_detectedx);	
+    #else
+	real_main(bist, cpu_init_detectedx);
+    #endif
+#else
+    #if USE_FALLBACK_IMAGE == 1
+	failover_process(bist, cpu_init_detectedx);	
+    #endif
+	real_main(bist, cpu_init_detectedx);
 #endif
-        real_main(bist, cpu_init_detectedx);
-
 }
 
+#if USE_FAILOVER_IMAGE==0
+
 void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 	static const uint16_t spd_addr [] = {
@@ -229,6 +268,8 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
 
+//	post_code(0x32);
+
 	lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
         console_init();
@@ -236,15 +277,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
 
-        setup_s2895_resource_map();
+	sio_gpio_setup();
+
+        setup_mb_resource_map();
+#if 0
+        dump_pci_device(PCI_DEV(0, 0x18, 0));
+	dump_pci_device(PCI_DEV(0, 0x19, 0));
+#endif
 
 	needs_reset = setup_coherent_ht_domain();
 
-        wait_all_core0_started();
+	wait_all_core0_started();
 #if CONFIG_LOGICAL_CPUS==1
         // It is said that we should start core1 after all core0 launched
         start_other_cores();
-        wait_all_other_cores_started(bsp_apicid);
+	wait_all_other_cores_started(bsp_apicid);
 #endif
 
         needs_reset |= ht_setup_chains_x();
@@ -253,7 +300,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
        	if (needs_reset) {
                	print_info("ht reset -\r\n");
-               	soft_reset();
+        //       	soft_reset();
        	}
 
         allow_all_aps_stop(bsp_apicid);
@@ -263,9 +310,24 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
         fill_mem_ctrl(nodes, ctrl, spd_addr);
 
 	enable_smbus();
+#if 0
+	dump_spd_registers(&cpu[0]);
+#endif
+#if 0
+	dump_smbus_registers();
+#endif
 
 	memreset_setup();
 	sdram_initialize(nodes, ctrl);
 
+#if 0
+	print_pci_devices();
+#endif
+
+#if 0
+	dump_pci_devices();
+#endif
+
 	post_cache_as_ram();
 }
+#endif
diff --git a/src/mainboard/tyan/s2895/cmos.layout b/src/mainboard/tyan/s2895/cmos.layout
index 5eb88b9a5a..c1f3d75316 100644
--- a/src/mainboard/tyan/s2895/cmos.layout
+++ b/src/mainboard/tyan/s2895/cmos.layout
@@ -78,10 +78,10 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
-8     0     DDR400
-8     1     DDR333
-8     2     DDR266
-8     3     DDR200
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
 9     0     off
 9     1     87.5%
 9     2     75.0%
diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c
index 3decafb71e..4d1451a92f 100644
--- a/src/mainboard/tyan/s2895/get_bus_conf.c
+++ b/src/mainboard/tyan/s2895/get_bus_conf.c
@@ -7,6 +7,8 @@
 #include <cpu/amd/dualcore.h>
 #endif
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 
 // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
 //busnum is default
@@ -31,8 +33,7 @@
         unsigned apicid_8131_2;
         unsigned apicid_ck804b;
 
-unsigned sblk;
-unsigned pci1234[] = 
+unsigned pci1234x[] = 
 {        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
 	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
         0x0000ff0,
@@ -44,9 +45,7 @@ unsigned pci1234[] =
 //        0x0000ff0,
 //        0x0000ff0
 };
-unsigned hc_possible_num;
-unsigned sbdn;
-unsigned hcdn[] = 
+unsigned hcdnx[] = 
 { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
 	0x20202020,
 	0x20202020,
@@ -68,25 +67,31 @@ void get_bus_conf(void)
 {
 
 	unsigned apicid_base;
+	unsigned sbdn;
 
         device_t dev;
+        int i;
+
+        if(get_bus_conf_done==1) return; //do it only once
+
+        get_bus_conf_done = 1;
 
-	if(get_bus_conf_done==1) return; //do it only once
+        sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+        for(i=0;i<sysconf.hc_possible_num; i++) {
+                sysconf.pci1234[i] = pci1234x[i];
+                sysconf.hcdn[i] = hcdnx[i];
+        }
 
-	get_bus_conf_done = 1;
+        get_sblk_pci1234();
 
-	hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);	
-	
-	get_sblk_pci1234();
-	
-	sbdn = (hcdn[0] & 0xff); // first byte of first chain
+	sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+	sbdn = sysconf.sbdn;
 
-	sbdn3 = (hcdn[1] & 0xff);
+	sbdn3 = (sysconf.hcdn[1] & 0xff);
 
-	sbdnb = (hcdn[2] & 0xff); // first byte of second chain
+	sbdnb = (sysconf.hcdn[2] & 0xff); // first byte of second chain
 
-//	bus_ck804_0 = node_link_to_bus(0, sblk);
-	bus_ck804_0 = (pci1234[0] >> 16) & 0xff;
+	bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff;
 
                 /* CK804 */
                 dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0));
@@ -158,7 +163,7 @@ void get_bus_conf(void)
                         printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e);
                 }
 
-		bus_8131_0 = (pci1234[1] >> 16) & 0xff;
+		bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff;
                 /* 8131-1 */
                 dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
                 if (dev) {
@@ -187,8 +192,8 @@ void get_bus_conf(void)
 
                 /* CK804b */
 
-	if(pci1234[2] & 0xf) { //if the second cpu is installed
-		bus_ck804b_0 = (pci1234[2]>>16) & 0xff;
+	if(sysconf.pci1234[2] & 0x0f) { //if the second cpu is installed
+		bus_ck804b_0 = (sysconf.pci1234[2]>>16) & 0xff;
 #if 0
                 dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0));
                 if (dev) {
diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c
index 5ed428ff9f..1779644c12 100644
--- a/src/mainboard/tyan/s2895/irq_tables.c
+++ b/src/mainboard/tyan/s2895/irq_tables.c
@@ -10,6 +10,8 @@
 #include <stdint.h>
 #include <arch/pirq_routing.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
 		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
 		uint8_t slot, uint8_t rfu)
@@ -44,10 +46,7 @@ extern  unsigned char bus_ck804b_3;//d
 extern  unsigned char bus_ck804b_4;//e
 extern  unsigned char bus_ck804b_5;//f
 
-extern unsigned pci1234[];
 
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 extern  unsigned sbdnb;
 
@@ -58,11 +57,13 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	struct irq_info *pirq_info;
 	unsigned slot_num;
 	uint8_t *v;
+	unsigned sbdn;
 
         uint8_t sum=0;
         int i;
 
         get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+	sbdn = sysconf.sbdn;
 
         /* Align the table to be 16 byte aligned. */
         addr += 15;
@@ -98,7 +99,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
         write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
         pirq_info++; slot_num++;
         
-	if(pci1234[2] & 0xf) {     
+	if(sysconf.pci1234[2] & 0xf) {     
 	//second pci beidge   
         	write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0);
 	        pirq_info++; slot_num++;
diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c
index a41cbcd12f..2d9313ea08 100644
--- a/src/mainboard/tyan/s2895/mptable.c
+++ b/src/mainboard/tyan/s2895/mptable.c
@@ -4,6 +4,8 @@
 #include <string.h>
 #include <stdint.h>
 
+#include <cpu/amd/amdk8_sysconf.h>
+
 extern  unsigned char bus_isa;
 extern  unsigned char bus_ck804_0; //1
 extern  unsigned char bus_ck804_1; //2
@@ -25,10 +27,6 @@ extern  unsigned apicid_8131_1;
 extern  unsigned apicid_8131_2;
 extern  unsigned apicid_ck804b;
 
-extern unsigned pci1234[];
-
-extern  unsigned sbdn;
-extern  unsigned hcdn[];
 extern  unsigned sbdn3;
 extern  unsigned sbdnb;
 
@@ -38,6 +36,7 @@ void *smp_write_config_table(void *v)
         static const char oem[8] = "TYAN    ";
         static const char productid[12] = "S2895       ";
         struct mp_config_table *mc;
+	unsigned sbdn;
 
         unsigned char bus_num;
 	int i;
@@ -62,6 +61,7 @@ void *smp_write_config_table(void *v)
         smp_write_processors(mc);
 
 	get_bus_conf();
+	sbdn = sysconf.sbdn;
 
 /*Bus:		Bus ID	Type*/
        /* define bus and isa numbers */
@@ -83,6 +83,7 @@ void *smp_write_config_table(void *v)
 				smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
 			}
 
+        	/* Initialize interrupt mapping*/
 
 			dword = 0x0000d218;
 	        	pci_write_config32(dev, 0x7c, dword);
@@ -110,7 +111,7 @@ void *smp_write_config_table(void *v)
 			}
                 }
 
-	    if(pci1234[2] & 0xf) {
+	    if(sysconf.pci1234[2] & 0xf) {
                 dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0));
                 if (dev) {
 			res = find_resource(dev, PCI_BASE_ADDRESS_1);
@@ -181,7 +182,7 @@ void *smp_write_config_table(void *v)
                 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4);
         }
 
-	if(pci1234[2] & 0xf) {
+	if(sysconf.pci1234[2] & 0xf) {
 //Onboard ck804b NIC
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53
 
diff --git a/src/mainboard/tyan/s2895/resourcemap.c b/src/mainboard/tyan/s2895/resourcemap.c
index f35252c085..9de9b2e107 100644
--- a/src/mainboard/tyan/s2895/resourcemap.c
+++ b/src/mainboard/tyan/s2895/resourcemap.c
@@ -3,7 +3,7 @@
  *
  */
 
-static void setup_s2895_resource_map(void)
+static void setup_mb_resource_map(void)
 {
 	static const unsigned int register_values[] = {
 		/* Careful set limit registers before base registers which contain the enables */
@@ -183,7 +183,7 @@ static void setup_s2895_resource_map(void)
 		 * [31:25] Reserved
 		 */
 		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
-		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, 
+		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, // need to talk to ANALOG of second CK804 to release PCI E reset
 		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
 		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
 
@@ -253,10 +253,10 @@ static void setup_s2895_resource_map(void)
 		 * [31:24] Bus Number Limit i
 		 *	   This field defines the highest bus number in configuration region i
 		 */
-		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, 
-		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, 
-		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, 
-		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, 
+		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
+		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
+		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, /* link 0 of cpu 1 --> Nvidia CK 804 Slave 	*/
+		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, /*113 link 1 of cpu 1 --> HT connector */
 
 	};