cleanup due to failing tla-svn-sync

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1972 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 233 deletions

diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
deleted file mode 100644
index d053c663f6..0000000000
--- a/src/mainboard/tyan/s4880/Config.lb
+++ /dev/null
@@ -1,233 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
-	default ROM_SECTION_SIZE   = FALLBACK_SIZE
-	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
-	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
-	default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-arch i386 end 
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-##
-## Romcc output
-##
-makerule ./failover.E
-        depends "$(MAINBOARD)/failover.c ./romcc"
-        action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-        depends "$(MAINBOARD)/failover.c ./romcc"
-        action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
-        depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
-        action  "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-        depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
-        action  "./romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-mainboardinit arch/i386/lib/jmp_auto_out.inc
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE 
-	mainboardinit cpu/x86/16bit/reset16.inc 
-	ldscript /cpu/x86/16bit/reset16.lds 
-else
-	mainboardinit cpu/x86/32bit/reset32.inc 
-	ldscript /cpu/x86/32bit/reset32.lds 
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup 
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds 
-	mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-mainboardinit arch/i386/lib/jmp_auto.inc
-
-##
-## Include the secondary Configuration files 
-##
-if CONFIG_CHIP_NAME
-        config chip.h
-end
-
-# sample config for tyan/s4880
-chip northbridge/amd/amdk8/root_complex
-        device apic_cluster 0 on
-                chip cpu/amd/socket_940
-                        device apic 0 on end
-                end
-        end
-
-	device pci_domain 0 on
-		chip northbridge/amd/amdk8
-			device pci 18.0 on end # LDT0
-			device pci 18.0 on end # LDT1
-			device pci 18.0 on #  northbridge 
-				#  devices on link 2, link 2 == LDT 2
-				chip southbridge/amd/amd8131
-					# the on/off keyword is mandatory
-                                        device pci 0.0 on
-                                                chip drivers/lsi/53c1030
-                                                        device pci 4.0 on end
-                                                        device pci 4.1 on end
-                                                        register "fw_address" = "0xfff8c000"
-                                                end
-                                                chip drivers/pci/onboard
-                                                        device pci 9.0 on end
-                                                        device pci 9.1 on end
-                                                end
-					end
-					device pci 0.1 on end
-					device pci 1.0 on end
-					device pci 1.1 on end
-				end
-				chip southbridge/amd/amd8111
-					# this "device pci 0.0" is the parent the next one
-					# PCI bridge
-					device pci 0.0 on
-						device pci 0.0 on end
-						device pci 0.1 on end
-						device pci 0.2 off end
-						device pci 1.0 off end
-                                                chip drivers/pci/onboard
-                                                        device pci 6.0 on end
-                                                        register "rom_address" = "0xfff80000"
-                                                end
-					end
-					device pci 1.0 on
-						chip superio/winbond/w83627hf
-							device pnp 2e.0 on #  Floppy
-                	                 			io 0x60 = 0x3f0
-                	                			irq 0x70 = 6
-                	                			drq 0x74 = 2
-							end
-                	        			device pnp 2e.1 off #  Parallel Port
-                	                 			io 0x60 = 0x378
-                	                			irq 0x70 = 7
-							end
-                	        			device pnp 2e.2 on #  Com1
-                	                 			io 0x60 = 0x3f8
-                	                			irq 0x70 = 4
-							end
-                	        			device pnp 2e.3 off #  Com2
-                	                 			io 0x60 = 0x2f8
-                	                			irq 0x70 = 3
-							end
-                	        			device pnp 2e.5 on #  Keyboard
-                	                 			io 0x60 = 0x60
-                	                 			io 0x62 = 0x64
-                	                			irq 0x70 = 1
-								irq 0x72 = 12
-							end
-                	                                device pnp 2e.6 off #  CIR
-                	                                        io 0x60 = 0x100
-                	                                end
-                	                                device pnp 2e.7 off #  GAME_MIDI_GIPO1
-                	                                        io 0x60 = 0x220
-                	                                        io 0x62 = 0x300
-                	                                        irq 0x70 = 9
-                	                                end  
-                	                                device pnp 2e.8 off end #  GPIO2
-                	                                device pnp 2e.9 off end #  GPIO3
-                	                                device pnp 2e.a off end #  ACPI
-                	                                device pnp 2e.b on #  HW Monitor
-                	                                        io 0x60 = 0x290
-                	                                        irq 0x70 = 5
-                	                                end
-						end
-					end
-					device pci 1.1 on end
-					device pci 1.2 on end
-					device pci 1.3 on end
-					device pci 1.5 off end
-					device pci 1.6 off end
-                                        register "ide0_enable" = "1"
-                                        register "ide1_enable" = "1"
-				end
-			end #  device pci 18.0 
-			
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end
-
-	end #pci_domain
-end
-