Whitespace changes to make s2912_fam10/ms9652_fam10 more similar.

Also, fix another typo in the ms9652 board name.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5184 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 14 insertions, 18 deletions

diff --git a/src/mainboard/tyan/s2912_fam10/Kconfig b/src/mainboard/tyan/s2912_fam10/Kconfig
index c71ffd8889..91f8f45457 100644
--- a/src/mainboard/tyan/s2912_fam10/Kconfig
+++ b/src/mainboard/tyan/s2912_fam10/Kconfig
@@ -27,7 +27,7 @@ config DCACHE_RAM_BASE
 	hex
 	default 0xc4000
 	depends on BOARD_TYAN_S2912_FAM10
-	
+
 config DCACHE_RAM_SIZE
 	hex
 	default 0x0c000
@@ -39,7 +39,7 @@ config DCACHE_RAM_GLOBAL_VAR_SIZE
 	depends on BOARD_TYAN_S2912_FAM10
 
 config APIC_ID_OFFSET
-	hex	
+	hex
 	default 0
 	depends on BOARD_TYAN_S2912_FAM10
 
@@ -65,7 +65,7 @@ config LB_CKS_RANGE_END
 
 config LB_CKS_LOC
 	int
-        default 123
+	default 123
 	depends on BOARD_TYAN_S2912_FAM10
 
 config MAINBOARD_PART_NUMBER
@@ -75,7 +75,7 @@ config MAINBOARD_PART_NUMBER
 
 config PCI_64BIT_PREF_MEM
 	bool
-        default n
+	default n
 	depends on BOARD_TYAN_S2912_FAM10
 
 config HAVE_FALLBACK_BOOT
@@ -104,7 +104,7 @@ config MAX_PHYSICAL_CPUS
 	depends on BOARD_TYAN_S2912_FAM10
 
 config HW_MEM_HOLE_SIZE_AUTO_INC
-	bool	
+	bool
 	default n
 	depends on BOARD_TYAN_S2912_FAM10
 
@@ -114,7 +114,7 @@ config HT_CHAIN_UNITID_BASE
 	depends on BOARD_TYAN_S2912_FAM10
 
 config HT_CHAIN_END_UNITID_BASE
-	hex	
+	hex
 	default 0x20
 	depends on BOARD_TYAN_S2912_FAM10
 
@@ -124,12 +124,12 @@ config USE_INIT
 	depends on BOARD_TYAN_S2912_FAM10
 
 config SERIAL_CPU_INIT
-	bool	
+	bool
 	default n
 	depends on BOARD_TYAN_S2912_FAM10
 
 config WAIT_BEFORE_CPUS_INIT
-	bool	
+	bool
 	default n
 	depends on BOARD_TYAN_S2912_FAM10
 
diff --git a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c
index 79520bdcf3..7ee4944a9c 100644
--- a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c
+++ b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c
@@ -68,7 +68,6 @@ static unsigned get_bus_conf_done = 0;
 
 void get_bus_conf(void)
 {
-
 	unsigned apicid_base;
 	struct mb_sysconf_t *m;
 
@@ -134,5 +133,4 @@ void get_bus_conf(void)
 	apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
 #endif
 	m->apicid_mcp55 = apicid_base+0;
-
 }
diff --git a/src/mainboard/tyan/s2912_fam10/mptable.c b/src/mainboard/tyan/s2912_fam10/mptable.c
index 36767e96e6..b2fae1f443 100644
--- a/src/mainboard/tyan/s2912_fam10/mptable.c
+++ b/src/mainboard/tyan/s2912_fam10/mptable.c
@@ -100,7 +100,7 @@ void *smp_write_config_table(void *v)
 
 	}
 
-		   /*I/O Ints:	Type	Polarity    Trigger			Bus ID	 IRQ	APIC ID	PIN# */
+			/*I/O Ints:	Type	Polarity    Trigger			Bus ID	 IRQ	APIC ID	PIN# */
 	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c
index 1216c298b9..45d0d9401a 100644
--- a/src/mainboard/tyan/s2912_fam10/romstage.c
+++ b/src/mainboard/tyan/s2912_fam10/romstage.c
@@ -150,10 +150,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
 #include "northbridge/amd/amdfam10/early_ht.c"
 
-
 static void sio_setup(void)
 {
-
 	unsigned value;
 	uint32_t dword;
 	uint8_t byte;
@@ -278,10 +276,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 #endif
 
 	val = cpuid_eax(1);
-	printk_debug("BSP Family_Model: %08x \n", val);
+	printk_debug("BSP Family_Model: %08x\n", val);
 	printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
-	printk_debug("bsp_apicid = %02x \n", bsp_apicid);
-	printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
+	printk_debug("bsp_apicid = %02x\n", bsp_apicid);
+	printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx);
 
 	/* Setup sysinfo defaults */
 	set_sysinfo_in_ram(0);
@@ -322,7 +320,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 #if FAM10_SET_FIDVID == 1
 	msr = rdmsr(0xc0010071);
-	printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+	printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
 
 	/* FIXME: The sb fid change may survive the warm reset and only
 	 * need to be done once.*/
@@ -340,7 +338,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	/* show final fid and vid */
 	msr=rdmsr(0xc0010071);
-	printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+	printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
 #endif
 
 	wants_reset = mcp55_early_setup_x();