printk_foo -> printk(BIOS_FOO, ...)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 19 insertions, 19 deletions

diff --git a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c
index 7ee4944a9c..e2f721bace 100644
--- a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c
+++ b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c
@@ -101,7 +101,7 @@ void get_bus_conf(void)
 			m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
 		}
 		else {
-			printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
+			printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
 		}
 
 		for(i=2; i<8;i++) {
@@ -110,7 +110,7 @@ void get_bus_conf(void)
 				m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
 			}
 			else {
-				printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
+				printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
 			}
 		}
 
@@ -123,7 +123,7 @@ void get_bus_conf(void)
 			m->bus_type[j] = 1;
 		if(m->bus_isa <= busn_max)
 			m->bus_isa = busn_max + 1;
-		printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+		printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
 	}
 
 /*I/O APICs:	APIC ID	Version	State		Address*/
diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c
index ea870a147b..b3628b65c5 100644
--- a/src/mainboard/tyan/s2912_fam10/irq_tables.c
+++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c
@@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	addr &= ~15;
 
 	/* This table must be betweeen 0xf0000 & 0x100000 */
-	printk_info("Writing IRQ routing tables to 0x%x...", addr);
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr);
 
 	pirq = (void *)(addr);
 	v = (uint8_t *)(addr);
@@ -131,7 +131,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 		pirq->checksum = sum;
 	}
 
-	printk_info("done.\n");
+	printk(BIOS_INFO, "done.\n");
 
 	return	(unsigned long) pirq_info;
 
diff --git a/src/mainboard/tyan/s2912_fam10/mptable.c b/src/mainboard/tyan/s2912_fam10/mptable.c
index b2fae1f443..4bd6c124a9 100644
--- a/src/mainboard/tyan/s2912_fam10/mptable.c
+++ b/src/mainboard/tyan/s2912_fam10/mptable.c
@@ -147,7 +147,7 @@ void *smp_write_config_table(void *v)
 	/* Compute the checksums */
 	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
 	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
-	printk_debug("Wrote the mp table end at: %p - %p\n",
+	printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
 		mc, smp_next_mpe_entry(mc));
 	return smp_next_mpe_entry(mc);
 }
diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c
index 29e4060243..cee8c5952f 100644
--- a/src/mainboard/tyan/s2912_fam10/romstage.c
+++ b/src/mainboard/tyan/s2912_fam10/romstage.c
@@ -198,7 +198,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();
-	printk_debug("\n");
+	printk(BIOS_DEBUG, "\n");
 
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
@@ -209,10 +209,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 #endif
 
 	val = cpuid_eax(1);
-	printk_debug("BSP Family_Model: %08x\n", val);
-	printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
-	printk_debug("bsp_apicid = %02x\n", bsp_apicid);
-	printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
+	printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
+	printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08x\n", cpu_init_detectedx);
 
 	/* Setup sysinfo defaults */
 	set_sysinfo_in_ram(0);
@@ -243,7 +243,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 #if CONFIG_LOGICAL_CPUS==1
 	/* Core0 on each node is configured. Now setup any additional cores. */
-	printk_debug("start_other_cores()\n");
+	printk(BIOS_DEBUG, "start_other_cores()\n");
 	start_other_cores();
 	post_code(0x37);
 	wait_all_other_cores_started(bsp_apicid);
@@ -253,7 +253,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 #if FAM10_SET_FIDVID == 1
 	msr = rdmsr(0xc0010071);
-	printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
+	printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
 
 	/* FIXME: The sb fid change may survive the warm reset and only
 	 * need to be done once.*/
@@ -271,7 +271,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	/* show final fid and vid */
 	msr=rdmsr(0xc0010071);
-	printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
+	printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
 #endif
 
 	wants_reset = mcp55_early_setup_x();
@@ -284,27 +284,27 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	}
 
 	if (wants_reset)
-		printk_debug("mcp55_early_setup_x wanted additional reset!\n");
+		printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n");
 
 	post_code(0x3B);
 
 	/* It's the time to set ctrl in sysinfo now; */
-	printk_debug("fill_mem_ctrl()\n");
+	printk(BIOS_DEBUG, "fill_mem_ctrl()\n");
 	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
 	post_code(0x3D);
 
-	printk_debug("enable_smbus()\n");
+	printk(BIOS_DEBUG, "enable_smbus()\n");
 	enable_smbus();
 	post_code(0x3E);
 
 	memreset_setup();
 	post_code(0x40);
 
-	printk_debug("raminit_amdmct()\n");
+	printk(BIOS_DEBUG, "raminit_amdmct()\n");
 	raminit_amdmct(sysinfo);
 	post_code(0x41);
 
-	printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
+	printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
 	post_cache_as_ram();	// BSP switch stack to ram, copy then execute LB.
 	post_code(0x43);	// Should never see this post code.
 }