This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 166 insertions, 166 deletions

diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb
index 34638892ae..c8f3a8f041 100644
--- a/src/mainboard/tyan/s2912/Config.lb
+++ b/src/mainboard/tyan/s2912/Config.lb
@@ -19,8 +19,8 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
 include /config/failovercalculation.lb
 
 arch i386 end
@@ -33,30 +33,30 @@ driver mainboard.o
 #needed by irq_tables and mptable and acpi_tables
 object get_bus_conf.o
 
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_MP_TABLE object mptable.o end
+if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
 	if CONFIG_USE_INIT
 		makerule ./cache_as_ram_auto.o
-			depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 		end
 	else
 		makerule ./cache_as_ram_auto.inc
-			depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 			action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
 			action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 		end
 	end
 
-if USE_FAILOVER_IMAGE
+if CONFIG_USE_FAILOVER_IMAGE
 else
     if CONFIG_AP_CODE_IN_CAR
 	makerule ./apc_auto.o
-		depends "$(MAINBOARD)/apc_auto.c option_table.h"
-		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/apc_auto.c -o $@"
+		depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
+		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
 	end
 	ldscript /arch/i386/init/ldscript_apc.lb
     end
@@ -66,13 +66,13 @@ end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 	mainboardinit cpu/x86/16bit/entry16.inc
 	ldscript /cpu/x86/16bit/entry16.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit cpu/x86/16bit/entry16.inc
 	ldscript /cpu/x86/16bit/entry16.lds
     end
@@ -91,8 +91,8 @@ mainboardinit cpu/x86/32bit/entry32.inc
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 	mainboardinit cpu/x86/16bit/reset16.inc
 	ldscript /cpu/x86/16bit/reset16.lds
     else
@@ -100,7 +100,7 @@ if HAVE_FAILOVER_BOOT
 	ldscript /cpu/x86/32bit/reset32.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit cpu/x86/16bit/reset16.inc
 	ldscript /cpu/x86/16bit/reset16.lds
     else
@@ -118,13 +118,13 @@ ldscript /southbridge/nvidia/mcp55/id.lds
 ##
 ## ROMSTRAP table for MCP55
 ##
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 	mainboardinit southbridge/nvidia/mcp55/romstrap.inc
 	ldscript /southbridge/nvidia/mcp55/romstrap.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit southbridge/nvidia/mcp55/romstrap.inc
 	ldscript /southbridge/nvidia/mcp55/romstrap.lds
     end
@@ -140,12 +140,12 @@ end
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 		ldscript /arch/i386/lib/failover_failover.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 		ldscript /arch/i386/lib/failover.lds
     end
 end
diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb
index 7222788349..a2166dd8b0 100644
--- a/src/mainboard/tyan/s2912/Options.lb
+++ b/src/mainboard/tyan/s2912/Options.lb
@@ -19,90 +19,90 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_ACPI_RESUME
-uses ACPI_SSDTX_NUM
-uses USE_FALLBACK_IMAGE
-uses USE_FAILOVER_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_FAILOVER_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_ACPI_SSDTX_NUM
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_USE_FAILOVER_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_FAILOVER_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_MAX_CPUS
 uses CONFIG_MAX_PHYSICAL_CPUS
 uses CONFIG_LOGICAL_CPUS
 uses CONFIG_IOAPIC
 uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses FAILOVER_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_FAILOVER_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
 uses COREBOOT_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_RAMBASE
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
 uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
+uses CONFIG_HAVE_INIT_TIMER
 uses CONFIG_GDB_STUB
 uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_USBDEBUG_DIRECT
 uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
-uses HW_MEM_HOLE_SIZE_AUTO_INC
-uses K8_HT_FREQ_1G_SUPPORT
-
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
-uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_HW_MEM_HOLE_SIZEK
+uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
+uses CONFIG_K8_HT_FREQ_1G_SUPPORT
+
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
 uses CONFIG_USE_INIT
 
-uses SERIAL_CPU_INIT
+uses CONFIG_SERIAL_CPU_INIT
 
-uses ENABLE_APIC_EXT_ID
-uses APIC_ID_OFFSET
-uses LIFT_BSP_APIC_ID
+uses CONFIG_ENABLE_APIC_EXT_ID
+uses CONFIG_APIC_ID_OFFSET
+uses CONFIG_LIFT_BSP_APIC_ID
 
 uses CONFIG_PCI_64BIT_PREF_MEM
 
@@ -110,9 +110,9 @@ uses CONFIG_LB_MEM_TOPK
 
 uses CONFIG_AP_CODE_IN_CAR
 
-uses MEM_TRAIN_SEQ
+uses CONFIG_MEM_TRAIN_SEQ
 
-uses WAIT_BEFORE_CPUS_INIT
+uses CONFIG_WAIT_BEFORE_CPUS_INIT
 
 uses CONFIG_USE_PRINTK_IN_CAR
 
@@ -121,21 +121,21 @@ uses CONFIG_USE_PRINTK_IN_CAR
 ###
 
 ##
-## ROM_SIZE is the size of boot ROM that this board will use.
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
 ##
-default ROM_SIZE=524288
-#default ROM_SIZE=0x100000
+default CONFIG_ROM_SIZE=524288
+#default CONFIG_ROM_SIZE=0x100000
 
 ##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
 ##
-#default FALLBACK_SIZE=131072
-#default FALLBACK_SIZE=0x40000
+#default CONFIG_FALLBACK_SIZE=131072
+#default CONFIG_FALLBACK_SIZE=0x40000
 
 #FALLBACK: 256K-4K
-default FALLBACK_SIZE=0x3f000
+default CONFIG_FALLBACK_SIZE=0x3f000
 #FAILOVER: 4K
-default FAILOVER_SIZE=0x01000
+default CONFIG_FAILOVER_SIZE=0x01000
 
 #more 1M for pgtbl
 default CONFIG_LB_MEM_TOPK=2048
@@ -143,42 +143,42 @@ default CONFIG_LB_MEM_TOPK=2048
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
-default HAVE_FAILOVER_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FAILOVER_BOOT=1
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
 
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
 
 ## ACPI tables will be included
-default HAVE_ACPI_TABLES=0
+default CONFIG_HAVE_ACPI_TABLES=0
 ## extra SSDT num
-default ACPI_SSDTX_NUM=3
+default CONFIG_ACPI_SSDTX_NUM=3
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
 
 ##
 ## Move the default coreboot cmos range off of AMD RTC registers
 ##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
 
 ##
 ## Build code for SMP support
@@ -189,25 +189,25 @@ default CONFIG_MAX_CPUS=4
 default CONFIG_MAX_PHYSICAL_CPUS=2
 default CONFIG_LOGICAL_CPUS=1
 
-#default SERIAL_CPU_INIT=0
+#default CONFIG_SERIAL_CPU_INIT=0
 
-default ENABLE_APIC_EXT_ID=0
-default APIC_ID_OFFSET=0x10
-default LIFT_BSP_APIC_ID=1
+default CONFIG_ENABLE_APIC_EXT_ID=0
+default CONFIG_APIC_ID_OFFSET=0x10
+default CONFIG_LIFT_BSP_APIC_ID=1
 
 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
 #2G
-#default HW_MEM_HOLE_SIZEK=0x200000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
 #1G
-default HW_MEM_HOLE_SIZEK=0x100000
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
 #512M
-#default HW_MEM_HOLE_SIZEK=0x80000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
 
 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
 
 #Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
+default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
 
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
@@ -216,16 +216,16 @@ default CONFIG_PCI_ROM_RUN=1
 #default CONFIG_USBDEBUG_DIRECT=1
 
 #HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default HT_CHAIN_UNITID_BASE=0
+default CONFIG_HT_CHAIN_UNITID_BASE=0
 
 #real SB Unit ID, default is 0x20, mean dont touch it at last
-#default HT_CHAIN_END_UNITID_BASE=0x6
+#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
 
 #make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
 
 #only offset for SB chain?, default is yes(1)
-default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
 #allow capable device use that above 4G
 #default CONFIG_PCI_64BIT_PREF_MEM=1
@@ -233,15 +233,15 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 ##
 ## enable CACHE_AS_RAM specifics
 ##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xc8000
-default DCACHE_RAM_SIZE=0x08000
-default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xc8000
+default CONFIG_DCACHE_RAM_SIZE=0x08000
+default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
 default CONFIG_USE_INIT=0
 
 default CONFIG_AP_CODE_IN_CAR=0
-default MEM_TRAIN_SEQ=1
-default WAIT_BEFORE_CPUS_INIT=1
+default CONFIG_MEM_TRAIN_SEQ=1
+default CONFIG_WAIT_BEFORE_CPUS_INIT=1
 
 ##
 ## Build code to setup a generic IOAPIC
@@ -251,37 +251,37 @@ default CONFIG_IOAPIC=1
 ##
 ## Clean up the motherboard id strings
 ##
-default MAINBOARD_PART_NUMBER="S2912"
-default MAINBOARD_VENDOR="Tyan"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
+default CONFIG_MAINBOARD_PART_NUMBER="S2912"
+default CONFIG_MAINBOARD_VENDOR="Tyan"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 32K heap
 ##
-default HEAP_SIZE=0x8000
+default CONFIG_HEAP_SIZE=0x8000
 
 ##
 ## Only use the option table in a normal image
 ##
-default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
 
 ##
 ## Coreboot C code runs at this location in RAM
 ##
-default _RAMBASE=0x00100000
+default CONFIG_RAMBASE=0x00100000
 
 ##
 ## Load the payload from the ROM
@@ -297,8 +297,8 @@ default CONFIG_ROM_PAYLOAD = 1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 ##
 ## Disable the gdb stub by default
@@ -314,21 +314,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1
 default CONFIG_CONSOLE_SERIAL8250=1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ### Select the coreboot loglevel
@@ -340,17 +340,17 @@ default TTYS0_LCS=0x3
 ## WARNING    5   warning conditions
 ## NOTICE     6   normal but significant condition
 ## INFO       7   informational
-## DEBUG      8   debug-level messages
+## CONFIG_DEBUG      8   debug-level messages
 ## SPEW       9   Way too many details
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 ##
 ## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
 #
diff --git a/src/mainboard/tyan/s2912/apc_auto.c b/src/mainboard/tyan/s2912/apc_auto.c
index d15f5ac346..8985b7affd 100644
--- a/src/mainboard/tyan/s2912/apc_auto.c
+++ b/src/mainboard/tyan/s2912/apc_auto.c
@@ -75,8 +75,8 @@
 
 void hardwaremain(int ret_addr)
 {
-	struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
-	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+	struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
+	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
 
 	struct node_core_id id;
 
diff --git a/src/mainboard/tyan/s2912/cache_as_ram_auto.c b/src/mainboard/tyan/s2912/cache_as_ram_auto.c
index 7c387b9bd0..5be6d82e9b 100644
--- a/src/mainboard/tyan/s2912/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2912/cache_as_ram_auto.c
@@ -39,7 +39,7 @@
 //if we want to wait for core1 done before DQS training, set it to 0
 #define K8_SET_FIDVID_CORE0_ONLY 1
 
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
 #endif
 
@@ -56,7 +56,7 @@
 #include "option_table.h"
 #include "pc80/mc146818rtc_early.c"
 
-#if USE_FAILOVER_IMAGE==0
+#if CONFIG_USE_FAILOVER_IMAGE==0
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #if CONFIG_USBDEBUG_DIRECT
@@ -79,7 +79,7 @@
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "superio/winbond/w83627hf/w83627hf_early_init.c"
 
-#if USE_FAILOVER_IMAGE==0
+#if CONFIG_USE_FAILOVER_IMAGE==0
 
 #include "cpu/x86/bist.h"
 
@@ -150,7 +150,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #endif
 
-#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
+#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
 
 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
@@ -219,7 +219,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 		);
 
  fallback_image:
-#if HAVE_FAILOVER_BOOT==1
+#if CONFIG_HAVE_FAILOVER_BOOT==1
 	__asm__ volatile ("jmp __fallback_image"
 		: /* outputs */
 		: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
@@ -232,21 +232,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-#if HAVE_FAILOVER_BOOT==1
-    #if USE_FAILOVER_IMAGE==1
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+    #if CONFIG_USE_FAILOVER_IMAGE==1
 	failover_process(bist, cpu_init_detectedx);
     #else
 	real_main(bist, cpu_init_detectedx);
     #endif
 #else
-    #if USE_FALLBACK_IMAGE == 1
+    #if CONFIG_USE_FALLBACK_IMAGE == 1
 	failover_process(bist, cpu_init_detectedx);
     #endif
 	real_main(bist, cpu_init_detectedx);
 #endif
 }
 
-#if USE_FAILOVER_IMAGE==0
+#if CONFIG_USE_FAILOVER_IMAGE==0
 
 void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -259,7 +259,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 #endif
 	};
 
-	struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
 	int needs_reset = 0;
 	unsigned bsp_apicid = 0;
@@ -268,7 +268,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}
 
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 
 	setup_mb_resource_map();
 
@@ -287,7 +287,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
 
-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
 	set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
 #endif
 	setup_coherent_ht_domain(); // routing table and start other core0