newconfig is no more.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 0 insertions, 456 deletions

diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
deleted file mode 100644
index 1b7f808b40..0000000000
--- a/src/mainboard/tyan/s2895/Config.lb
+++ /dev/null
@@ -1,145 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-#needed by irq_tables and mptable and acpi_tables
-object get_bus_conf.o
-
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-if CONFIG_GENERATE_ACPI_TABLES
-        object acpi_tables.o
-	makerule dsdt.c
-		depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
-		action  "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
-		action  "mv dsdt.hex dsdt.c"
-	end
-        object ./dsdt.o
-	#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
-	#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
-end
-
-if CONFIG_USE_INIT
-	makerule ./auto.o
-		depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-	end
-else
-	makerule ./auto.inc
-		depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-		action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
-		action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-	end
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-		mainboardinit cpu/x86/16bit/entry16.inc
-		ldscript /cpu/x86/16bit/entry16.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-		mainboardinit cpu/x86/16bit/entry16.inc
-		ldscript /cpu/x86/16bit/entry16.lds
-	end
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
-	if CONFIG_USE_INIT
-		ldscript /cpu/x86/32bit/entry32.lds
-	end
-
-	if CONFIG_USE_INIT
-		ldscript /cpu/amd/car/cache_as_ram.lds
-	end
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_HAVE_FAILOVER_BOOT
-    if CONFIG_USE_FAILOVER_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-    else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-    end
-else
-    if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-    else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-    end
-end
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-		mainboardinit southbridge/nvidia/ck804/romstrap.inc
-		ldscript /southbridge/nvidia/ck804/romstrap.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-		mainboardinit southbridge/nvidia/ck804/romstrap.inc
-		ldscript /southbridge/nvidia/ck804/romstrap.lds
-	end
-end
-
-##
-## Setup Cache-As-Ram
-##
-	mainboardinit cpu/amd/car/cache_as_ram.inc
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-			ldscript /arch/i386/lib/failover_failover.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-			ldscript /arch/i386/lib/failover.lds
-	end
-end
-
-##
-## Setup RAM
-##
-	if CONFIG_USE_INIT
-		initobject auto.o
-	else
-		mainboardinit ./auto.inc
-	end
-
-##
-## Include the secondary Configuration files
-##
-config chip.h
-
-include devicetree.cb
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
deleted file mode 100644
index 6659c9ad38..0000000000
--- a/src/mainboard/tyan/s2895/Options.lb
+++ /dev/null
@@ -1,311 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_MULTIBOOT
-uses CONFIG_HAVE_SMI_HANDLER
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_VGA_ROM_RUN
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_USE_PRINTK_IN_CAR
-
-uses CONFIG_SERIAL_CPU_INIT
-
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses CONFIG_RAMTOP
-
-uses CONFIG_ID_SECTION_OFFSET
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE=1024*1024
-
-##
-## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-
-#FALLBACK: 256K-4K
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#FAILOVER: 4K
-default CONFIG_FAILOVER_SIZE=0x01000
-
-#more 1M for pgtbl
-default CONFIG_RAMTOP=2048*1024
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-default CONFIG_HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build SMI handler
-##
-default CONFIG_HAVE_SMI_HANDLER=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=11
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to provide ACPI support
-##
-default CONFIG_GENERATE_ACPI_TABLES=1
-default CONFIG_HAVE_LOW_TABLES=1
-default CONFIG_MULTIBOOT=0
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-default CONFIG_VGA_ROM_RUN=1
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_MAX_PHYSICAL_CPUS=2
-default CONFIG_LOGICAL_CPUS=1
-
-default CONFIG_SERIAL_CPU_INIT=0
-
-#1G memory hole
-default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default CONFIG_HT_CHAIN_UNITID_BASE=0x0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
-
-#make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#Opteron K8 1G HT Support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default CONFIG_USE_DCACHE_RAM=1
-default CONFIG_DCACHE_RAM_BASE=0xcf000
-default CONFIG_DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=0
-
-default CONFIG_ENABLE_APIC_EXT_ID=0
-default CONFIG_APIC_ID_OFFSET=0x10
-default CONFIG_LIFT_BSP_APIC_ID=0
-
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="s2895"
-default CONFIG_MAINBOARD_VENDOR="Tyan"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-### 
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-## 
-default CONFIG_GDB_STUB=0
-
-default CONFIG_USE_PRINTK_IN_CAR=1
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG      1   system is unusable               
-## ALERT      2   action must be taken immediately 
-## CRIT       3   critical conditions              
-## ERR        4   error conditions                 
-## WARNING    5   warning conditions               
-## NOTICE     6   normal but significant condition 
-## INFO       7   informational                    
-## CONFIG_DEBUG      8   debug-level messages             
-## SPEW       9   Way too many details             
-
-## Request this level of debugging output
-default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-default CONFIG_ID_SECTION_OFFSET=0x80
-
-### End Options.lb
-end