This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 120 insertions, 120 deletions

diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
index 45672e99c6..04a53b57be 100644
--- a/src/mainboard/tyan/s2892/Config.lb
+++ b/src/mainboard/tyan/s2892/Config.lb
@@ -1,5 +1,5 @@
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
 include /config/nofailovercalculation.lb
 default CONFIG_ROM_PAYLOAD = 1
 
@@ -17,15 +17,15 @@ driver mainboard.o
 #needed by irq_tables and mptable and acpi_tables
 object get_bus_conf.o
 
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_MP_TABLE object mptable.o end
+if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
-if HAVE_ACPI_TABLES
+if CONFIG_HAVE_ACPI_TABLES
         object acpi_tables.o
 	makerule dsdt.c
-		depends "$(MAINBOARD)/dsdt.dsl"
-		action  "iasl -p $(CURDIR)/dsdt -tc $(MAINBOARD)/dsdt.dsl"
+		depends "$(CONFIG_MAINBOARD)/dsdt.dsl"
+		action  "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl"
 		action  "mv dsdt.hex dsdt.c"
 	end
         object ./dsdt.o
@@ -35,13 +35,13 @@ end
 
 if CONFIG_USE_INIT
 	makerule ./auto.o
-		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+		depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 	end
 else
 	makerule ./auto.inc
-		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+		depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+		action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 		action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
 		action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 	end
@@ -50,7 +50,7 @@ end
 ##
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit cpu/x86/16bit/entry16.inc
 	ldscript /cpu/x86/16bit/entry16.lds
 end
@@ -68,7 +68,7 @@ mainboardinit cpu/x86/32bit/entry32.inc
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit cpu/x86/16bit/reset16.inc
 	ldscript /cpu/x86/16bit/reset16.lds
 else
@@ -85,7 +85,7 @@ ldscript /southbridge/nvidia/ck804/id.lds
 ##
 ## ROMSTRAP table for CK804
 ##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit southbridge/nvidia/ck804/romstrap.inc
 	ldscript /southbridge/nvidia/ck804/romstrap.lds
 end
@@ -100,7 +100,7 @@ end
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
 		ldscript /arch/i386/lib/failover.lds
 end
 
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
index 0cfbcd5c56..efc4cba7a5 100644
--- a/src/mainboard/tyan/s2892/Options.lb
+++ b/src/mainboard/tyan/s2892/Options.lb
@@ -1,90 +1,90 @@
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_MAX_CPUS
 uses CONFIG_MAX_PHYSICAL_CPUS
 uses CONFIG_LOGICAL_CPUS
 uses CONFIG_IOAPIC
 uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses HAVE_ACPI_TABLES
-uses HAVE_ACPI_RESUME
-uses HAVE_LOW_TABLES
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_HAVE_LOW_TABLES
 uses CONFIG_MULTIBOOT
-uses HAVE_SMI_HANDLER
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_HAVE_SMI_HANDLER
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
 uses COREBOOT_EXTRA_VERSION
-uses _RAMBASE
+uses CONFIG_RAMBASE
 uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_CONSOLE_BTEXT
-uses HAVE_INIT_TIMER
+uses CONFIG_HAVE_INIT_TIMER
 uses CONFIG_GDB_STUB
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_VGA_ROM_RUN
 uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
+uses CONFIG_HW_MEM_HOLE_SIZEK
 
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
 uses CONFIG_USE_PRINTK_IN_CAR
 
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
 uses CONFIG_LB_MEM_TOPK
 
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE=1024*1024
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+default CONFIG_ROM_SIZE=1024*1024
 
 ##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
 ##
-#default FALLBACK_SIZE=131072
+#default CONFIG_FALLBACK_SIZE=131072
 #256K
-default FALLBACK_SIZE=0x40000
+default CONFIG_FALLBACK_SIZE=0x40000
 
 ###
 ### Build options
@@ -93,48 +93,48 @@ default FALLBACK_SIZE=0x40000
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
 
 ##
 ## Build SMI handler
 ##
-default HAVE_SMI_HANDLER=0
+default CONFIG_HAVE_SMI_HANDLER=0
 
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
 
 ##
 ## Build code to provide ACPI support
 ##
-default HAVE_ACPI_TABLES=1
-default HAVE_LOW_TABLES=1
+default CONFIG_HAVE_ACPI_TABLES=1
+default CONFIG_HAVE_LOW_TABLES=1
 default CONFIG_MULTIBOOT=0
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
 
 ##
 ## Move the default coreboot cmos range off of AMD RTC registers
 ##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
 
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
@@ -151,19 +151,19 @@ default CONFIG_MAX_PHYSICAL_CPUS=2
 default CONFIG_LOGICAL_CPUS=1
 
 #1G memory hole
-default HW_MEM_HOLE_SIZEK=0x100000
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
 
 ##HT Unit ID offset, default is 1, the typical one
-default HT_CHAIN_UNITID_BASE=0x0
+default CONFIG_HT_CHAIN_UNITID_BASE=0x0
 
 ##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default HT_CHAIN_END_UNITID_BASE=0x0
+#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0
 
 #make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
 
 ##only offset for SB chain?, default is yes(1)
-default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
 #BTEXT Console
 #default CONFIG_CONSOLE_BTEXT=1
@@ -175,9 +175,9 @@ default CONFIG_PCI_ROM_RUN=1
 ##
 ## enable CACHE_AS_RAM specifics
 ##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xcf000
-default DCACHE_RAM_SIZE=0x1000
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xcf000
+default CONFIG_DCACHE_RAM_SIZE=0x1000
 default CONFIG_USE_INIT=0
 
 
@@ -189,37 +189,37 @@ default CONFIG_IOAPIC=1
 ##
 ## Clean up the motherboard id strings
 ##
-default MAINBOARD_PART_NUMBER="s2892"
-default MAINBOARD_VENDOR="Tyan"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892
+default CONFIG_MAINBOARD_PART_NUMBER="s2892"
+default CONFIG_MAINBOARD_VENDOR="Tyan"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 16K heap
 ##
-default HEAP_SIZE=0x4000
+default CONFIG_HEAP_SIZE=0x4000
 
 ##
 ## Only use the option table in a normal image
 ##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
 
 ##
 ## Coreboot C code runs at this location in RAM
 ##
-default _RAMBASE=0x00004000
+default CONFIG_RAMBASE=0x00004000
 
 ##
 ## Load the payload from the ROM
@@ -233,8 +233,8 @@ default CONFIG_ROM_PAYLOAD = 1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 ##
 ## Disable the gdb stub by default
@@ -251,21 +251,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1
 default CONFIG_CONSOLE_SERIAL8250=1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ### Select the coreboot loglevel
@@ -277,17 +277,17 @@ default TTYS0_LCS=0x3
 ## WARNING    5   warning conditions               
 ## NOTICE     6   normal but significant condition 
 ## INFO       7   informational                    
-## DEBUG      8   debug-level messages             
+## CONFIG_DEBUG      8   debug-level messages             
 ## SPEW       9   Way too many details             
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 ##
 ## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
 #
diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
index bafd6e9c9b..97f0660096 100644
--- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
@@ -83,7 +83,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-#if USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
@@ -155,7 +155,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 
-#if USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 		failover_process(bist, cpu_init_detectedx);
 #endif
 	real_main(bist, cpu_init_detectedx);
@@ -185,7 +185,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 //	post_code(0x32);
 
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();