Remove fallback/normal handling in mainboards'

romstage.c like r5255 did for failover/fallback/normal
mainboards.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5257 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 12 insertions, 62 deletions

diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c
index 9ace5e30ae..0505493dc1 100644
--- a/src/mainboard/tyan/s2891/romstage.c
+++ b/src/mainboard/tyan/s2891/romstage.c
@@ -77,8 +77,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -112,68 +110,8 @@ static void sio_setup(void)
 
 }
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	unsigned last_boot_normal_x = last_boot_normal();
-
-	/* Is this a cpu only reset? or Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-	if (last_boot_normal_x) {
-	goto normal_image;
-	} else {
-	goto fallback_image;
-	}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-//	post_code(0x22);
-	if (bios_reset_detected() && last_boot_normal_x) {
-	goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-	goto normal_image;
-	}
-	else {
-	goto fallback_image;
-	}
- normal_image:
-//	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image"
-	: /* outputs */
-	: "a" (bist), "b"(cpu_init_detectedx) /* inputs */
-	);
-
- fallback_image:
-//	post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-		failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 		(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 		(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -189,6 +127,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	struct mem_controller ctrl[8];
 	unsigned nodes;
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the ck804 */
+		ck804_enable_rom();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx);
 	}