summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan/s2885
diff options
context:
space:
mode:
authorYinghai Lu <yinghailu@gmail.com>2004-10-20 05:07:16 +0000
committerYinghai Lu <yinghailu@gmail.com>2004-10-20 05:07:16 +0000
commit6a61d6a4ae26d02844bf8043525d89b0ef9e0351 (patch)
treeffe2c7e2680ccb73502fe4129b9727051792dadb /src/mainboard/tyan/s2885
parentabed01d81d0c55848232a9ebd9bb4c55d036f45d (diff)
Tyan update to work with new CPU Config
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1693 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan/s2885')
-rw-r--r--src/mainboard/tyan/s2885/Config.lb404
-rw-r--r--src/mainboard/tyan/s2885/auto.c160
-rw-r--r--src/mainboard/tyan/s2885/chip.h2
-rw-r--r--src/mainboard/tyan/s2885/cmos.layout1
-rw-r--r--src/mainboard/tyan/s2885/failover.c33
-rw-r--r--src/mainboard/tyan/s2885/mainboard.c279
-rw-r--r--src/mainboard/tyan/s2885/mptable.c26
-rw-r--r--src/mainboard/tyan/s2885/resourcemap.c4
-rw-r--r--src/mainboard/tyan/s2885/ti_firewire.c2
9 files changed, 573 insertions, 338 deletions
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index 721badb52a..5064b781f7 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -1,268 +1,220 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD
-uses ARCH
-uses HAVE_HARD_RESET
-uses HARD_RESET_BUS
-uses HARD_RESET_DEVICE
-uses HARD_RESET_FUNCTION
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-
##
-## Build code to reset the motherboard from linuxBIOS
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
##
-default HAVE_HARD_RESET=1
-default HARD_RESET_BUS=3
-default HARD_RESET_DEVICE=4
-default HARD_RESET_FUNCTION=0
-
-###
-### Build code to export a programmable irq routing table
-###
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
##
-default HAVE_MP_TABLE=1
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
-## Build code to export a CMOS option table
+## Compute where this copy of linuxBIOS will start in the boot rom
##
-default HAVE_OPTION_TABLE=1
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-#
-###
-### Build code to setup a generic IOAPIC
-###
-default CONFIG_IOAPIC=1
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-###
-### Clean up the motherboard id strings
-###
-default MAINBOARD_PART_NUMBER="S2885"
-default MAINBOARD_VENDOR="Tyan"
+arch i386 end
-###
-### Set all of the defaults for an x86 architecture
-###
-
-arch i386 end
+##
+## Build the objects we have code for in this directory.
+##
-###
-### Build the objects we have code for in this directory.
-###
driver mainboard.o
-#dir /drvers/adaptec/7902
-#dir /drivers/si/3114
-#dir /drivers/intel/82551
-#driver ti_firewire.o
-#dir /drivers/vga
-
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
-#
-###
-### Build our 16 bit and 32 bit linuxBIOS entry code
-###
-mainboardinit cpu/i386/entry16.inc
-mainboardinit cpu/i386/entry32.inc
-mainboardinit cpu/i386/bist32.inc
-ldscript /cpu/i386/entry16.lds
-ldscript /cpu/i386/entry32.lds
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
-#
-###
-### Build our reset vector (This is where linuxBIOS is entered)
-###
+makerule ./failover.inc
+ depends "./failover.E ./romcc"
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h "
+ action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc
+ depends "./auto.E ./romcc"
+ action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
-#### Should this be in the northbridge code?
+### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
-#
-###
-### Include an id string (For safe flashing)
-###
+
+##
+## Include an id string (For safe flashing)
+##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-#
-####
-#### This is the early phase of linuxBIOS startup
-#### Things are delicate and we test to see if we should
-#### failover to another image.
-####
-#option MAX_REBOOT_CNT=2
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-#
-###
-### Setup our mtrrs
-###
-mainboardinit cpu/k8/earlymtrr.inc
+
###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
###
-#
if USE_FALLBACK_IMAGE
- mainboardinit ./failover.inc
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
end
-#
-#
###
-### Setup the serial port
+### O.k. We aren't just an intermediary anymore!
###
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-mainboardinit cpu/i386/bist32_fail.inc
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-###
-### Romcc output
-###
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
-end
-makerule ./failover.inc
- depends "./romcc ./failover.E"
- action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h"
- action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
-end
-
-makerule ./auto.inc
- depends "./romcc ./auto.E"
- action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E"
-end
-
-mainboardinit cpu/k8/enable_mmx_sse.inc
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
mainboardinit ./auto.inc
-mainboardinit cpu/k8/disable_mmx_sse.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
-#
-###
-### Include the secondary Configuration files
-###
+##
+## Include the secondary Configuration files
+##
dir /pc80
config chip.h
-register "fixup_scsi" = "1"
-register "fixup_vga" = "1"
-northbridge amd/amdk8 "mc0"
- pci 0:18.0
- pci 0:18.0
- pci 0:18.0
- pci 0:18.1
- pci 0:18.2
- pci 0:18.3
- southbridge amd/amd8131 "amd8131" link 2
- pci 0:0.0
- pci 0:0.1
- pci 0:1.0
- pci 0:1.1
+# sample config for tyan/s2885
+chip northbridge/amd/amdk8
+ device pci_domain 0 on
+ device pci 18.0 on # LDT0
+ chip southbridge/amd/amd8151
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 1.0 on end
+ end
+ end
+ device pci 18.0 on end # LDT1
+ device pci 18.0 on # northbridge
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/amd/amd8131
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 1.0 on end
+ device pci 1.1 on end
+ end
+ chip southbridge/amd/amd8111
+ # this "device pci 0.0" is the parent the next one
+ # PCI bridge
+ device pci 0.0 on
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 0.2 off end
+ device pci 1.0 off end
+ end
+ device pci 1.0 on
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off end # CIR
+ device pnp 2e.7 off end # GAME_MIDI_GIPO1
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ end
+ end
+ end
+ device pci 1.1 on end
+ device pci 1.2 on end
+ device pci 1.3 on end
+ device pci 1.5 on end
+ device pci 1.6 off end
+ end
+ end # device pci 18.0
+
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+
+ chip northbridge/amd/amdk8
+ device pci 19.0 on end
+ device pci 19.0 on end
+ device pci 19.0 on end
+ device pci 19.1 on end
+ device pci 19.2 on end
+ device pci 19.3 on end
+ end
+ end
+ device apic_cluster 0 on
+ chip cpu/amd/socket_940
+ device apic 0 on end
+ end
+ chip cpu/amd/socket_940
+ device apic 1 on end
+ end
end
- southbridge amd/amd8111 "amd8111" link 2
- pci 0:0.0
- pci 0:1.0 on
- pci 0:1.1 on
- pci 0:1.2 on
- pci 0:1.3 on
- pci 0:1.5 on
- pci 0:1.6 off
- pci 1:0.0 on
- pci 1:0.1 on
- pci 1:0.2 off
- pci 1:1.0 off
- superio winbond/w83627hf link 1
- pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- pnp 2e.6 off # CIR
- pnp 2e.7 off # GAME_MIDI_GIPO1
- pnp 2e.8 off # GPIO2
- pnp 2e.9 off # GPIO3
- pnp 2e.a off # ACPI
- pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- end
- southbridge amd/amd8151 "amd8151" link 0
- pci 0:0.0
- pci 0:1.0
- end
-end
-
-northbridge amd/amdk8 "mc1"
- pci 0:19.0
- pci 0:19.0
- pci 0:19.0
- pci 0:19.1
- pci 0:19.2
- pci 0:19.3
-end
-
-cpu k8 "cpu0"
- register "ldt0" = "{.chip = &amd8151, .ht_width=16, .ht_speed=600}"
- register "ldt2" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
-end
-
-cpu k8 "cpu1"
end
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index e4c99d88ef..8a386ab191 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -1,10 +1,12 @@
#define ASSEMBLY 1
+
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
-#include <arch/smp/lapic.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
@@ -13,49 +15,57 @@
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/k8/apic_timer.c"
+#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-#include "cpu/p6/boot_cpu.c"
+#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "northbridge/amd/amdk8/cpu_rev.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
static void hard_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
+ /* enable cf9 */
+ pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+ /* reset */
+ outb(0x0e, 0x0cf9);
}
static void soft_reset(void)
{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+ set_bios_reset();
+ pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
+static void soft2_reset(void)
+{
+ set_bios_reset();
+ pci_write_config8(PCI_DEV(3, 0x04, 0), 0x47, 1);
}
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- } else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
+ if (is_cpu_pre_c0()) {
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ }
+ else {
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ }
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
+ if (is_cpu_pre_c0()) {
+ udelay(800);
+ outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ udelay(90);
+ }
}
static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
@@ -82,21 +92,32 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
* [3] Route to Link 2
*/
- uint32_t ret = 0x00010101; /* default row entry */
-
- /* CPU0 LDT1 <-> LDT1 CPU1 */
+ uint32_t ret=0x00010101; /* default row entry */
+/*
+ (L1) (L1) (L2)
+ CPU1-------------CPU0--------8131------8111
+ |(L0)
+ |
+ |
+ |
+ |
+ |
+ 8151
+*/
+ /* Link1 of CPU0 to Link1 of CPU1 */
static const unsigned int rows_2p[2][2] = {
{ 0x00050101, 0x00010404 },
{ 0x00010404, 0x00050101 }
};
- if (maxnodes > 2) {
+ if(maxnodes>2) {
print_debug("this mainboard is only designed for 2 cpus\r\n");
- maxnodes = 2;
+ maxnodes=2;
}
- if (!(node >= maxnodes || row >= maxnodes)) {
- ret = rows_2p[node][row];
+
+ if (!(node>=maxnodes || row>=maxnodes)) {
+ ret=rows_2p[node][row];
}
return ret;
@@ -112,6 +133,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
+#include "northbridge/amd/amdk8/setup_resource_map.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
@@ -121,7 +143,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(void)
+static void main(unsigned long bist)
{
static const struct mem_controller cpu[] = {
#if FIRST_CPU
@@ -150,59 +172,97 @@ static void main(void)
#if 1
static const struct ht_chain ht_c[] = {
- {
+ { /* Link 2 of CPU0 */
.udev = PCI_DEV(0, 0x18, 0),
.upos = 0xc0,
- .devreg = 0xe0,
+ .devreg = 0xe0, /* Preset bus num in resource map */
},
- {
+ { /* Link 0 of CPU0 */
.udev = PCI_DEV(0, 0x18, 0),
.upos = 0x80,
- .devreg = 0xe4,
+ .devreg = 0xe4, /* Preset bus num in resource map */
},
};
#endif
int needs_reset;
- enable_lapic();
- init_timer();
-
- if (cpu_init_detected()) {
- asm volatile ("jmp __cpu_reset");
- }
-
- distinguish_cpu_resets();
- if (!boot_cpu()) {
- stop_this_cpu();
- }
-
+ if (bist == 0) {
+ /* Skip this if there was a built in self test failure */
+ amd_early_mtrr_init();
+ enable_lapic();
+ init_timer();
+
+ if (cpu_init_detected()) {
+#if 0
+ asm volatile ("jmp __cpu_reset");
+#else
+ /* cpu reset also reset the memtroller ????
+ need soft_reset to reset all except keep HT link freq and width */
+ distinguish_cpu_resets();
+ soft2_reset();
+#endif
+ }
+ distinguish_cpu_resets();
+ if (!boot_cpu()) {
+ stop_this_cpu();
+ }
+ }
+
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+// report_bist_failure(bist);
+
setup_s2885_resource_map();
needs_reset = setup_coherent_ht_domain();
+#if 0
+ needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0);
+#else
needs_reset |= ht_setup_chains(ht_c, sizeof(ht_c)/sizeof(ht_c[0]));
+#endif
if (needs_reset) {
print_info("ht reset -\r\n");
soft_reset();
}
-#if 0
- print_pci_devices();
-#endif
-
enable_smbus();
-
#if 0
dump_spd_registers(&cpu[0]);
#endif
-
memreset_setup();
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
#if 0
dump_pci_devices();
+#endif
+#if 0
dump_pci_device(PCI_DEV(0, 0x18, 1));
#endif
+ /* Check all of memory */
+#if 0
+ msr_t msr;
+ msr = rdmsr(TOP_MEM2);
+ print_debug("TOP_MEM2: ");
+ print_debug_hex32(msr.hi);
+ print_debug_hex32(msr.lo);
+ print_debug("\r\n");
+
+ ram_check(0x00000000, msr.lo+(msr.hi<<32));
+
+#endif
+
+#if 0
+
+//#if TOTAL_CPUS < 2
+ // Check 16MB of memory @ 0
+ ram_check(0x00000000, 0x00100000);
+//#else
+ // Check 16MB of memory @ 2GB
+// ram_check(0x80000000, 0x80100000);
+//#endif
+#endif
+
+
}
diff --git a/src/mainboard/tyan/s2885/chip.h b/src/mainboard/tyan/s2885/chip.h
index 75251c70b6..0be04051da 100644
--- a/src/mainboard/tyan/s2885/chip.h
+++ b/src/mainboard/tyan/s2885/chip.h
@@ -1,4 +1,4 @@
-extern struct chip_control mainboard_tyan_s2885_control;
+extern struct chip_operations mainboard_tyan_s2885_ops;
struct mainboard_tyan_s2885_config {
int fixup_scsi;
diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout
index 247715e6ac..ea027282c4 100644
--- a/src/mainboard/tyan/s2885/cmos.layout
+++ b/src/mainboard/tyan/s2885/cmos.layout
@@ -41,6 +41,7 @@ entries
432 8 h 0 boot_countdown
440 4 e 9 slow_cpu
444 1 e 1 nmi
+445 1 e 1 iommu
728 256 h 0 user_data
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c
index 95d675bc20..2f63cc85b7 100644
--- a/src/mainboard/tyan/s2885/failover.c
+++ b/src/mainboard/tyan/s2885/failover.c
@@ -4,22 +4,15 @@
#include <device/pci_ids.h>
#include <arch/io.h>
#include <arch/romcc_io.h>
-#include <arch/smp/lapic.h>
+#include <cpu/x86/lapic.h>
#include "pc80/mc146818rtc_early.c"
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/p6/boot_cpu.c"
+#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
-#define HAVE_REGPARM_SUPPORT 0
-#if HAVE_REGPARM_SUPPORT
static unsigned long main(unsigned long bist)
{
-#else
-static void main(void)
-{
- unsigned long bist = 0;
-#endif
/* Make cerain my local apic is useable */
enable_lapic();
@@ -61,20 +54,18 @@ static void main(void)
}
normal_image:
asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
cpu_reset:
+#if 0
asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+#endif
fallback_image:
-#if HAVE_REGPARM_SUPPORT
return bist;
-#else
- return;
-#endif
}
diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c
index f29f486896..4c3c4a3a14 100644
--- a/src/mainboard/tyan/s2885/mainboard.c
+++ b/src/mainboard/tyan/s2885/mainboard.c
@@ -6,38 +6,269 @@
#include "../../../northbridge/amd/amdk8/northbridge.h"
#include "chip.h"
-unsigned long initial_apicid[CONFIG_MAX_CPUS] =
+#if 0
+static void fixup_lsi_53c1030(struct device *pdev)
{
- 0, 1
-};
+// uint8_t byte;
+ uint16_t word;
-static struct device_operations mainboard_operations = {
- .read_resources = root_dev_read_resources,
- .set_resources = root_dev_set_resources,
- .enable_resources = enable_childrens_resources,
- .init = 0,
- .scan_bus = amdk8_scan_root_bus,
- .enable = 0,
-};
+ byte = 1;
+ pci_write_config8(pdev, 0xff, byte);
+ // Set the device id
+// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030);
+ // Set the subsytem vendor id
+// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN);
+ word = 0x10f1;
+ pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word);
+ // Set the subsytem id
+ word = 0x2880;
+ pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word);
+ // Disable writes to the device id
+ byte = 0;
+ pci_write_config8(pdev, 0xff, byte);
+
+// lsi_scsi_init(pdev);
+
+}
+#endif
+
+#if 0
+static void print_pci_regs(struct device *dev)
+{
+ uint8_t byte;
+ int i;
+
+ for(i=0;i<256;i++) {
+ byte = pci_read_config8(dev, i);
+
+ if((i%16)==0) printk_debug("\n%02x:",i);
+ printk_debug(" %02x",byte);
+ }
+ printk_debug("\n");
+
+// pci_write_config8(dev, 0x4, byte);
-static void enumerate(struct chip *chip)
+}
+#endif
+#if 0
+static void print_mem(void)
{
- struct chip *child;
+ unsigned int i;
+ unsigned int low_1MB = 0xf4107000;
+ for(i=low_1MB;i<low_1MB+1024;i++) {
+ if((i%16)==0) printk_debug("\n %08x:",i);
+ printk_debug(" %02x ",(unsigned char)*((unsigned char *)i));
+ }
+#if 0
+ for(i=low_1MB;i<low_1MB+1024*4;i++) {
+ if((i%16)==0) printk_debug("\n %08x:",i);
+ printk_debug(" %c ",(unsigned char)*((unsigned char *)i));
+ }
+#endif
+ }
+#endif
+#if 0
+static void amd8111_enable_rom(void)
+{
+ uint8_t byte;
+ struct device *dev;
+
+ /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */
+ /* Locate the amd8111 */
+ dev = dev_find_device(0x1022, 0x7468, 0);
- if (chip->control && chip->control->name) {
- printk_debug("Enumerating: %s\n", chip->control->name);
+ /* Set the 4MB enable bit bit */
+ byte = pci_read_config8(dev, 0x43);
+ byte |= 0x80;
+ pci_write_config8(dev, 0x43, byte);
+}
+#endif
+#if 0
+static void onboard_scsi_fixup(void)
+{
+ struct device *dev;
+#if 1
+ unsigned char i,j,k;
+
+ for(i=0;i<=15;i++) {
+ for(j=0;j<=0x1f;j++) {
+ for (k=0;k<=6;k++){
+ dev = dev_find_slot(i, PCI_DEVFN(j, k));
+ if (dev) {
+ printk_debug("%02x:%02x:%02x",i,j,k);
+ print_pci_regs(dev);
+ }
+ }
+ }
}
+#endif
+
- /* update device operation for dynamic root */
- dev_root.ops = &mainboard_operations;
- chip->dev = &dev_root;
- chip->bus = 0;
- for (child = chip->children; child; child = child->next) {
- child->bus = &dev_root.link[0];
+#if 0
+ dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0);
+ if(!dev) {
+ printk_info("LSI_SCSI_FW_FIXUP: No Device Found!");
+ return;
}
+
+ lsi_scsi_init(dev);
+#endif
+// print_mem();
+// amd8111_enable_rom();
+}
+#endif
+#if 0
+static void vga_fixup(void) {
+ // we do this right here because:
+ // - all the hardware is working, and some VGA bioses seem to need
+ // that
+ // - we need page 0 below for linuxbios tables.
+#if CONFIG_REALMODE_IDT == 1
+ printk_debug("INSTALL REAL-MODE IDT\n");
+ setup_realmode_idt();
+#endif
+#if CONFIG_VGABIOS == 1
+ printk_debug("DO THE VGA BIOS\n");
+ do_vgabios(0x0600);
+ post_code(0x93);
+#endif
+
}
-struct chip_control mainboard_tyan_s2885_control = {
- .enumerate = enumerate,
- .name = "Tyan s2885 mainboard ",
+#endif
+
+#if 0
+static void
+enable(struct chip *chip, enum chip_pass pass)
+{
+
+ struct mainboard_tyan_s2895_config *conf =
+ (struct mainboard_tyan_s2895_config *)chip->chip_info;
+
+ switch (pass) {
+ default: break;
+// case CONF_PASS_PRE_CONSOLE:
+// case CONF_PASS_PRE_PCI:
+// case CONF_PASS_POST_PCI:
+ case CONF_PASS_PRE_BOOT:
+// if (conf->fixup_scsi)
+// onboard_scsi_fixup();
+// if (conf->fixup_vga)
+// vga_fixup();
+ printk_debug("mainboard fixup pass %d done\r\n",
+ pass);
+ break;
+ }
+
+}
+#endif
+
+#undef DEBUG
+#define DEBUG 0
+#if DEBUG
+static void debug_init(device_t dev)
+{
+ unsigned bus;
+ unsigned devfn;
+#if 0
+ for(bus = 0; bus < 256; bus++) {
+ for(devfn = 0; devfn < 256; devfn++) {
+ int i;
+ dev = dev_find_slot(bus, devfn);
+ if (!dev) {
+ continue;
+ }
+ if (!dev->enabled) {
+ continue;
+ }
+ printk_info("%02x:%02x.%0x aka %s\n",
+ bus, devfn >> 3, devfn & 7, dev_path(dev));
+ for(i = 0; i < 256; i++) {
+ if ((i & 0x0f) == 0) {
+ printk_info("%02x:", i);
+ }
+ printk_info(" %02x", pci_read_config8(dev, i));
+ if ((i & 0x0f) == 0xf) {
+ printk_info("\n");
+ }
+ }
+ printk_info("\n");
+ }
+ }
+#endif
+#if 0
+ msr_t msr;
+ unsigned index;
+ unsigned eax, ebx, ecx, edx;
+ index = 0x80000007;
+ printk_debug("calling cpuid 0x%08x\n", index);
+ asm volatile(
+ "cpuid"
+ : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+ : "a" (index)
+ );
+ printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n",
+ index, eax, ebx, ecx, edx);
+ if (edx & (3 << 1)) {
+ index = 0xC0010042;
+ printk_debug("Reading msr: 0x%08x\n", index);
+ msr = rdmsr(index);
+ printk_debug("msr[0x%08x]: 0x%08x%08x\n",
+ index, msr.hi, msr.hi);
+ }
+#endif
+}
+
+static void debug_noop(device_t dummy)
+{
+}
+
+static struct device_operations debug_operations = {
+ .read_resources = debug_noop,
+ .set_resources = debug_noop,
+ .enable_resources = debug_noop,
+ .init = debug_init,
+};
+
+static unsigned int scan_root_bus(device_t root, unsigned int max)
+{
+ struct device_path path;
+ device_t debug;
+ max = root_dev_scan_bus(root, max);
+ path.type = DEVICE_PATH_PNP;
+ path.u.pnp.port = 0;
+ path.u.pnp.device = 0;
+ debug = alloc_dev(&root->link[1], &path);
+ debug->ops = &debug_operations;
+ return max;
+}
+#endif
+
+static void mainboard_init(device_t dev)
+{
+ root_dev_init(dev);
+
+// do_verify_cpu_voltages();
+}
+
+static struct device_operations mainboard_operations = {
+ .read_resources = root_dev_read_resources,
+ .set_resources = root_dev_set_resources,
+ .enable_resources = root_dev_enable_resources,
+ .init = mainboard_init,
+#if !DEBUG
+ .scan_bus = root_dev_scan_bus,
+#else
+ .scan_bus = scan_root_bus,
+#endif
+ .enable = 0,
+};
+
+static void enable_dev(struct device *dev)
+{
+ dev_root.ops = &mainboard_operations;
+}
+struct chip_operations mainboard_tyan_s2885_ops = {
+ .name = "Tyan s2885 mainboard ",
+ .enable_dev = enable_dev,
};
diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c
index d9477e2966..b5095a6cce 100644
--- a/src/mainboard/tyan/s2885/mptable.c
+++ b/src/mainboard/tyan/s2885/mptable.c
@@ -4,7 +4,7 @@
#include <string.h>
#include <stdint.h>
-void *smp_write_config_table(void *v, unsigned long * processor_map)
+void *smp_write_config_table(void *v)
{
static const char sig[4] = "PCMP";
static const char oem[8] = "TYAN ";
@@ -37,7 +37,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
mc->mpe_checksum = 0;
mc->reserved = 0;
- smp_write_processors(mc, processor_map);
+ smp_write_processors(mc);
{
device_t dev;
@@ -107,19 +107,21 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
/*I/O APICs: APIC ID Version State Address*/
smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
{
- struct pci_dev *dev;
- uint32_t base;
+ device_t dev;
+ struct resource *res;
dev = dev_find_slot(3, PCI_DEVFN(0x1,1));
if (dev) {
- base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- base &= PCI_BASE_ADDRESS_MEM_MASK;
- smp_write_ioapic(mc, 3, 0x11, base);
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, 0x03, 0x11, res->base);
+ }
}
dev = dev_find_slot(3, PCI_DEVFN(0x2,1));
if (dev) {
- base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- base &= PCI_BASE_ADDRESS_MEM_MASK;
- smp_write_ioapic(mc, 4, 0x11, base);
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, 0x04, 0x11, res->base);
+ }
}
}
@@ -197,9 +199,9 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
return smp_next_mpe_entry(mc);
}
-unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map)
+unsigned long write_smp_table(unsigned long addr)
{
void *v;
v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v, processor_map);
+ return (unsigned long)smp_write_config_table(v);
}
diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c
index 31cf8e04a5..2c51f1d114 100644
--- a/src/mainboard/tyan/s2885/resourcemap.c
+++ b/src/mainboard/tyan/s2885/resourcemap.c
@@ -252,8 +252,8 @@ static void setup_s2885_resource_map(void)
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06010207,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000007,
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000203, // AMD 8111 on link2 of CPU 0
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070003, // AMD 8151 on link0 of CPU 0
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
};
diff --git a/src/mainboard/tyan/s2885/ti_firewire.c b/src/mainboard/tyan/s2885/ti_firewire.c
index 15f83c0983..12c4c0d0f9 100644
--- a/src/mainboard/tyan/s2885/ti_firewire.c
+++ b/src/mainboard/tyan/s2885/ti_firewire.c
@@ -25,8 +25,6 @@ static void ti_firewire_init(struct device *dev)
word |= ((1 << 2) |(1<<4)); // Command: 3--> 17
pci_write_config16(dev, 0x4, word);
- printk_debug("TI_FIREWIRE_FIXUP: done \n");
-
}
static struct device_operations ti_firewire_ops = {