diff options
author | arch import user (historical) <svn@openbios.org> | 2005-07-06 17:15:30 +0000 |
---|---|---|
committer | arch import user (historical) <svn@openbios.org> | 2005-07-06 17:15:30 +0000 |
commit | ef03afa405b049a172146aab93cfb81fb21f3945 (patch) | |
tree | 3b59033be66edd60c2cc6c66d6875153dc052a72 /src/mainboard/tyan/s2885 | |
parent | 014c3e185fe8e1455e56efeb496715a67ce292bb (diff) |
Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-34
Creator: Yinghai Lu <yhlu@tyan.com>
AMD D0/E0 Opteron new mem mapping support, AMD E Opteron mem hole support,AMD K8 Four Ranks DIMM support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1950 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/tyan/s2885')
-rw-r--r-- | src/mainboard/tyan/s2885/Options.lb | 23 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/auto.c | 194 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/chip.h | 2 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/cmos.layout | 1 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/failover.c | 30 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/mptable.c | 101 | ||||
-rw-r--r-- | src/mainboard/tyan/s2885/resourcemap.c | 12 |
7 files changed, 190 insertions, 173 deletions
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index b4d0bd25d7..74aaedbe69 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -9,6 +9,8 @@ uses HARD_RESET_FUNCTION uses IRQ_SLOT_COUNT uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE @@ -53,6 +55,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN +uses K8_E0_MEM_HOLE_SIZEK ### ### Build options @@ -66,7 +69,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=262144 +default FALLBACK_SIZE=131072 ## ## Build code for the fallback boot @@ -114,17 +117,25 @@ default LB_CKS_LOC=123 ## Only worry about 2 micro processors ## default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 +default CONFIG_MAX_CPUS=4 +default CONFIG_MAX_PHYSICAL_CPUS=2 +default CONFIG_LOGICAL_CPUS=1 + +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + +#1G memory hole +default K8_E0_MEM_HOLE_SIZEK=0x100000 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 ## ## Build code to setup a generic IOAPIC ## default CONFIG_IOAPIC=1 -#VGA -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 - ## ## Clean up the motherboard id strings ## diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index aacb4b007b..cff103b9cc 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -6,13 +6,11 @@ #include <device/pnp_def.h> #include <arch/romcc_io.h> #include <cpu/x86/lapic.h> -#include <arch/cpu.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -20,6 +18,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" @@ -43,17 +42,6 @@ static void soft_reset(void) pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } -#define AMD8111_RESET PCI_DEV( \ - HARD_RESET_BUS, \ - HARD_RESET_DEVICE, \ - HARD_RESET_FUNCTION) - -static void soft2_reset(void) -{ - set_bios_reset(); - pci_write_config8(AMD8111_RESET, 0x47, 1); -} - static void memreset_setup(void) { if (is_cpu_pre_c0()) { @@ -74,61 +62,6 @@ static void memreset(int controllers, const struct mem_controller *ctrl) } } -static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) -{ - /* Routing Table Node i - * - * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 - * - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - - uint32_t ret=0x00010101; /* default row entry */ -/* - (L1) (L1) (L2) - CPU1-------------CPU0--------8131------8111 - |(L0) - | - | - | - | - | - 8151 -*/ - /* Link1 of CPU0 to Link1 of CPU1 */ - static const unsigned int rows_2p[2][2] = { - { 0x00050101, 0x00010404 }, - { 0x00010404, 0x00050101 } - }; - - if(maxnodes>2) { - print_debug("this mainboard is only designed for 2 cpus\r\n"); - maxnodes=2; - } - - - if (!(node>=maxnodes || row>=maxnodes)) { - ret=rows_2p[node][row]; - } - - return ret; -} - static inline void activate_spd_rom(const struct mem_controller *ctrl) { /* nothing to do */ @@ -140,16 +73,33 @@ static inline int spd_read_byte(unsigned device, unsigned address) } //#include "northbridge/amd/amdk8/setup_resource_map.c" +#define K8_4RANK_DIMM_SUPPORT 1 #include "northbridge/amd/amdk8/raminit.c" + +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" /* tyan does not want the default */ #include "resourcemap.c" +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#else +#include "cpu/amd/model_fxx/node_id.c" +#endif + #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + static void main(unsigned long bist) { static const struct mem_controller cpu[] = { @@ -178,22 +128,71 @@ static void main(unsigned long bist) }; int needs_reset; +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else unsigned nodeid; +#endif if (bist == 0) { /* Skip this if there was a built in self test failure */ amd_early_mtrr_init(); + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); + + id = get_node_core_id_x(); // that is initid + #if ENABLE_APIC_EXT_ID == 1 + if(id.coreid == 0) { + enable_apic_ext_id(id.nodeid); + } + #endif +#else + nodeid = get_node_id(); + #if ENABLE_APIC_EXT_ID == 1 + enable_apic_ext_id(nodeid); + #endif +#endif + enable_lapic(); init_timer(); - nodeid = lapicid() & 0xf; - - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); +#if CONFIG_LOGICAL_CPUS==1 + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if( id.nodeid != 0 ) //all except cores in node0 + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); + #endif + + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(id.nodeid); + } + +#else + #if ENABLE_APIC_EXT_ID == 1 + #if LIFT_BSP_APIC_ID == 0 + if(nodeid != 0) + #endif + lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 + + #endif + + if (cpu_init_detected(nodeid)) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(nodeid); +#endif + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + stop_this_cpu(); } } @@ -202,51 +201,26 @@ static void main(unsigned long bist) console_init(); /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); - + report_bist_failure(bist); + setup_s2885_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if 0 - needs_reset |= ht_setup_chains(2); -#else - needs_reset |= ht_setup_chains_x(); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); #endif + + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); + if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); } enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); -#endif memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 0 - dump_pci_devices(); -#endif - - /* Check all of memory */ -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif - -#if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#endif - -#if 0 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x00100000); - // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x80100000); -#endif - } diff --git a/src/mainboard/tyan/s2885/chip.h b/src/mainboard/tyan/s2885/chip.h index bcedaec668..dadfb0f4ee 100644 --- a/src/mainboard/tyan/s2885/chip.h +++ b/src/mainboard/tyan/s2885/chip.h @@ -1,6 +1,6 @@ extern struct chip_operations mainboard_tyan_s2885_ops; struct mainboard_tyan_s2885_config { - int fixup_scsi; +// int fixup_scsi; // int fixup_vga; }; diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout index ea027282c4..c1f3d75316 100644 --- a/src/mainboard/tyan/s2885/cmos.layout +++ b/src/mainboard/tyan/s2885/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c index 45315521ac..345d3f4d1a 100644 --- a/src/mainboard/tyan/s2885/failover.c +++ b/src/mainboard/tyan/s2885/failover.c @@ -11,16 +11,33 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" +#if CONFIG_LOGICAL_CPUS==1 +#include "cpu/amd/dualcore/dualcore_id.c" +#else +#include "cpu/amd/model_fxx/node_id.c" +#endif + static unsigned long main(unsigned long bist) { - unsigned nodeid; - /* Make cerain my local apic is useable */ - enable_lapic(); - - nodeid = lapicid() & 0xf; +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif + /* Make cerain my local apic is useable */ +// enable_lapic(); +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(id.nodeid)) { +#else +// nodeid = lapicid() & 0xf; + nodeid = get_node_id(); + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { +#endif /* Is this a cpu only reset? */ - if (cpu_init_detected(nodeid)) { if (last_boot_normal()) { goto normal_image; } else { @@ -36,7 +53,6 @@ static unsigned long main(unsigned long bist) } } - /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ enumerate_ht_chain(); diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index ba7bc390ad..2396ade53e 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -3,6 +3,9 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif void *smp_write_config_table(void *v) { @@ -20,6 +23,10 @@ void *smp_write_config_table(void *v) unsigned char bus_8111_1; unsigned char bus_8151_0; unsigned char bus_8151_1; + unsigned apicid_base; + unsigned apicid_8111; + unsigned apicid_8131_1; + unsigned apicid_8131_2; mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); @@ -110,7 +117,15 @@ void *smp_write_config_table(void *v) smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); //8111 +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_8111 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; + smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); //8111 { device_t dev; struct resource *res; @@ -118,78 +133,78 @@ void *smp_write_config_table(void *v) if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { - smp_write_ioapic(mc, 3, 0x11, res->base); + smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x2,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { - smp_write_ioapic(mc, 0x04, 0x11, res->base); + smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); } } } /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x2, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x2, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, 0x2, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x2, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x2, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x2, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x2, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x2, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x2, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x2, 0xf); +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_8111, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, apicid_8111, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_8111, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_8111, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_8111, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_8111, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //??? What - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|3, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|3, apicid_8111, 0x13); //Onboard AMD AC97 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|1, apicid_8111, 0x11); // Onboard AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); // AGP Display Adapter - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10); //Onboard Serial ATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x11); //Onboard Firewire - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x13); //Onboard Broadcom NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x3, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); //Slot 5 PCI 32 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, 0x2, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, 0x2, 0x13); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, apicid_8111, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, apicid_8111, 0x12); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, apicid_8111, 0x13); // //Slot 3 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, 0x3, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, 0x3, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, 0x3, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, 0x3, 0x2);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, apicid_8131_1, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, apicid_8131_1, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, apicid_8131_1, 0x1);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, apicid_8131_1, 0x2);// //Slot 4 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|0, 0x3, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|1, 0x3, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|2, 0x3, 0x0);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|3, 0x3, 0x1);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|0, apicid_8131_1, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|1, apicid_8131_1, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|2, apicid_8131_1, 0x0);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|3, apicid_8131_1, 0x1);// //Slot 1 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, 0x4, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, 0x4, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, 0x4, 0x2); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, 0x4, 0x3); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); // //Slot 2 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|0, 0x4, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|1, 0x4, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|2, 0x4, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|3, 0x4, 0x0);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|0, apicid_8131_2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|1, apicid_8131_2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|2, apicid_8131_2, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|3, apicid_8131_2, 0x0);// /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c index 2c51f1d114..bc2a8ba673 100644 --- a/src/mainboard/tyan/s2885/resourcemap.c +++ b/src/mainboard/tyan/s2885/resourcemap.c @@ -119,7 +119,7 @@ static void setup_s2885_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, /* Memory-Mapped I/O Base i Registers * F1:0x80 i = 0 @@ -154,7 +154,7 @@ static void setup_s2885_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, /* PCI I/O Limit i Registers * F1:0xC4 i = 0 @@ -181,7 +181,7 @@ static void setup_s2885_resource_map(void) * This field defines the end of PCI I/O region n * [31:25] Reserved */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -211,7 +211,7 @@ static void setup_s2885_resource_map(void) * This field defines the start of PCI I/O region n * [31:25] Reserved */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, @@ -252,8 +252,8 @@ static void setup_s2885_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration regin i */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000203, // AMD 8111 on link2 of CPU 0 - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070003, // AMD 8151 on link0 of CPU 0 +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000203, // AMD 8111 on link2 of CPU 0 +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070003, // AMD 8151 on link0 of CPU 0 PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; |