Since some people disapprove of white space cleanups mixed in regular commits

while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 32 insertions, 32 deletions

diff --git a/src/mainboard/tyan/s2882/devicetree.cb b/src/mainboard/tyan/s2882/devicetree.cb
index d563232b2d..b8cbce2858 100644
--- a/src/mainboard/tyan/s2882/devicetree.cb
+++ b/src/mainboard/tyan/s2882/devicetree.cb
@@ -7,7 +7,7 @@ chip northbridge/amd/amdk8/root_complex
 
 	device pci_domain 0 on
 		chip northbridge/amd/amdk8
-			device pci 18.0 on #  northbridge 
+			device pci 18.0 on #  northbridge
 				#  devices on link 0, link 0 == LDT 0
 				chip southbridge/amd/amd8131
 					# the on/off keyword is mandatory
@@ -67,7 +67,7 @@ chip northbridge/amd/amdk8/root_complex
                 	                                        io 0x60 = 0x220
                 	                                        io 0x62 = 0x300
                 	                                        irq 0x70 = 9
-                	                                end  
+                	                                end
                 	                                device pnp 2e.8 off end #  GPIO2
                 	                                device pnp 2e.9 off end #  GPIO3
                 	                                device pnp 2e.a off end #  ACPI
@@ -80,13 +80,13 @@ chip northbridge/amd/amdk8/root_complex
 					device pci 1.1 on end
 					device pci 1.2 on end
 					device pci 1.3 on end
-					device pci 1.3 on 
+					device pci 1.3 on
 #						 chip drivers/generic/generic #dimm 0-0-0
 #							 device i2c 50 on end
 #						 end
 #						 chip drivers/generic/generic #dimm 0-0-1
 #							 device i2c 51 on end
-#						 end	 
+#						 end
 #						 chip drivers/generic/generic #dimm 0-1-0
 #							 device i2c 52 on end
 #						 end
@@ -111,11 +111,11 @@ chip northbridge/amd/amdk8/root_complex
 					register "ide0_enable" = "1"
 					register "ide1_enable" = "1"
 				end
-			end #  device pci 18.0 
-			
+			end #  device pci 18.0
+
                 	device pci 18.0 on end
                 	device pci 18.0 on end
-			
+
 			device pci 18.1 on end
 			device pci 18.2 on end
 			device pci 18.3 on end
diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c
index 3107ac8a87..4ddd63eecb 100644
--- a/src/mainboard/tyan/s2882/irq_tables.c
+++ b/src/mainboard/tyan/s2882/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
    Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
@@ -63,7 +63,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link)
                 dst_node = (config_map >> 4) & 7;
                 dst_link = (config_map >> 8) & 3;
                 bus_base = (config_map >> 16) & 0xff;
-#if 0                           
+#if 0
                 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
                         dst_node, dst_link, bus_base,
                         reg, config_map);
@@ -76,11 +76,11 @@ static unsigned node_link_to_bus(unsigned node, unsigned link)
         return 0;
 }
 
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
 		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
 		uint8_t slot, uint8_t rfu)
 {
-        pirq_info->bus = bus; 
+        pirq_info->bus = bus;
         pirq_info->devfn = devfn;
                 pirq_info->irq[0].link = link0;
                 pirq_info->irq[0].bitmap = bitmap0;
@@ -162,15 +162,15 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 
 	pirq = (void *)(addr);
 	v = (uint8_t *)(addr);
-	
+
 	pirq->signature = PIRQ_SIGNATURE;
 	pirq->version  = PIRQ_VERSION;
-	
+
 	pirq->rtr_bus = bus_chain_0;
 	pirq->rtr_devfn = (4<<3)|3;
 
 	pirq->exclusive_irqs = 0;
-	
+
 	pirq->rtr_vendor = 0x1022;
 	pirq->rtr_device = 0x746b;
 
@@ -186,7 +186,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
                 dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3));
                 if (dev) {
                         /* initialize PCI interupts - these assignments depend
-                        on the PCB routing of PINTA-D 
+                        on the PCB routing of PINTA-D
 
                         PINTA = IRQ5
                         PINTB = IRQ9
@@ -202,7 +202,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
         pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4);
         write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
 	pirq_info++; slot_num++;
-	
+
         printk(BIOS_DEBUG, "setting Onboard AMD USB \n");
         static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 };
         pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0);
@@ -279,16 +279,16 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 	pirq_info++; slot_num++;
 #endif
 
-#if 0	
+#if 0
 	//?? what's this?
         write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0);
 	pirq_info++; slot_num++;
 #endif
-                
-	pirq->size = 32 + 16 * slot_num; 
+
+	pirq->size = 32 + 16 * slot_num;
 
         for (i = 0; i < pirq->size; i++)
-                sum += v[i];	
+                sum += v[i];
 
 	sum = pirq->checksum - sum;
 
diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c
index f1d7a27179..43ccef6276 100644
--- a/src/mainboard/tyan/s2882/mptable.c
+++ b/src/mainboard/tyan/s2882/mptable.c
@@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link)
                 dst_node = (config_map >> 4) & 7;
                 dst_link = (config_map >> 8) & 3;
                 bus_base = (config_map >> 16) & 0xff;
-#if 0                           
+#if 0
                 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
                         dst_node, dst_link, bus_base,
                         reg, config_map);
@@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v)
         unsigned apicid_8111;
         unsigned apicid_8131_1;
         unsigned apicid_8131_2;
-        
+
 	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
         memset(mc, 0, sizeof(*mc));
 
@@ -95,8 +95,8 @@ static void *smp_write_config_table(void *v)
                         bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
                         bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
                         bus_isa++;
-                }     
-                else {  
+                }
+                else {
                         printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
 
                         bus_8111_1 = 4;
@@ -137,9 +137,9 @@ static void *smp_write_config_table(void *v)
 #if CONFIG_LOGICAL_CPUS==1
 	apicid_base = get_apicid_base(3);
 #else
-        apicid_base = CONFIG_MAX_PHYSICAL_CPUS; 
+        apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
 #endif
-        apicid_8111 = apicid_base+0; 
+        apicid_8111 = apicid_base+0;
         apicid_8131_1 = apicid_base+1;
         apicid_8131_2 = apicid_base+2;
 
@@ -163,7 +163,7 @@ static void *smp_write_config_table(void *v)
                 }
 
 	}
-  
+
 /*I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN# */
         smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0);
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1);
@@ -180,7 +180,7 @@ static void *smp_write_config_table(void *v)
 
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|3, apicid_8111, 0x13);
 
-	
+
 //On Board AMD USB
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
 
@@ -209,7 +209,7 @@ static void *smp_write_config_table(void *v)
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);//
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);//
 
-//Slot 4 PCIX 100/66        
+//Slot 4 PCIX 100/66
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2);
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);//
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);//
diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c
index c49dff9f10..d8816d4cff 100644
--- a/src/mainboard/tyan/s2882/romstage.c
+++ b/src/mainboard/tyan/s2882/romstage.c
@@ -1,4 +1,4 @@
- 
+
 #include <stdint.h>
 #include <string.h>
 #include <device/pci_def.h>
@@ -129,7 +129,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		init_cpus(cpu_init_detectedx);
         }
 
-	
+
  	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
         uart_init();
         console_init();
@@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
         setup_default_resource_map();
 
 	needs_reset = setup_coherent_ht_domain();
-	
+
 #if CONFIG_LOGICAL_CPUS==1
         // It is said that we should start core1 after all core0 launched
         start_other_cores();