Kconfig: AMD Fam10, all Tyan boards.

Fam10 doesn't build due to size constraints at this time.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4741 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 193 insertions, 0 deletions

diff --git a/src/mainboard/tyan/s2880/Kconfig b/src/mainboard/tyan/s2880/Kconfig
new file mode 100644
index 0000000000..d66c2b7606
--- /dev/null
+++ b/src/mainboard/tyan/s2880/Kconfig
@@ -0,0 +1,123 @@
+config BOARD_TYAN_S2880
+	bool "Thunder K8SR (S2880)"
+	select ARCH_X86
+	select CPU_AMD_K8
+	select CPU_AMD_SOCKET_940
+	select NORTHBRIDGE_AMD_AMDK8
+	select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
+	select SOUTHBRIDGE_AMD_AMD8131
+	select SOUTHBRIDGE_AMD_AMD8111
+	select SUPERIO_WINBOND_W83627HF
+	select PIRQ_TABLE
+	select SERIAL_CPU_INIT
+	select AP_CODE_IN_CAR
+
+config MAINBOARD_DIR
+	string
+	default tyan/s2880
+	depends on BOARD_TYAN_S2880
+
+config APIC_ID_OFFSET
+	hex
+	default 0x10
+	depends on BOARD_TYAN_S2880
+
+config SB_HT_CHAIN_ON_BUS0
+	int
+	default 2
+	depends on BOARD_TYAN_S2880
+
+config LB_CKS_RANGE_END
+	int
+	default 122
+	depends on BOARD_TYAN_S2880
+
+config LB_CKS_LOC
+	int
+        default 123
+	depends on BOARD_TYAN_S2880
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "s2880"
+	depends on BOARD_TYAN_S2880
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+	hex
+	default 0x2880
+	depends on BOARD_TYAN_S2880
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x100000
+	depends on BOARD_TYAN_S2880
+
+config MEM_TRAIN_SEQ
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config MAX_CPUS
+	int
+	default 4
+	depends on BOARD_TYAN_S2880
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 2
+	depends on BOARD_TYAN_S2880
+
+config MEM_TRAIN_SEQ
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config AP_CODE_IN_CAR
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config HT_CHAIN_UNITID_BASE
+	hex
+	default 0xa
+	depends on BOARD_TYAN_S2880
+
+config HT_CHAIN_END_UNITID_BASE
+	hex
+	default 0x6
+	depends on BOARD_TYAN_S2880
+
+config USE_INIT
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config WAIT_BEFORE_CPUS_INIT
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config SB_HT_CHAIN_ON_BUS0
+	int
+	default 0
+	depends on BOARD_TYAN_S2880
+
+config SB_HT_CHAIN_UNITID_OFFSET_ONLY
+	bool
+	default n
+	depends on BOARD_TYAN_S2880
+
+config HAVE_ACPI_TABLES
+	bool "Generate ACPI tables"
+	default n
+	depends on BOARD_TYAN_S2880
+
+config IRQ_SLOT_COUNT
+	int
+	default 9
+	depends on BOARD_TYAN_S2880
diff --git a/src/mainboard/tyan/s2880/Makefile.inc b/src/mainboard/tyan/s2880/Makefile.inc
new file mode 100644
index 0000000000..d6fcb7b33a
--- /dev/null
+++ b/src/mainboard/tyan/s2880/Makefile.inc
@@ -0,0 +1,70 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+##
+
+driver-y +=  mainboard.o
+
+#needed by irq_tables and mptable and acpi_tables
+obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) +=  dsdt.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) +=  acpi_tables.o
+
+#driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o
+
+# This is part of the conversion to init-obj and away from included code.
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/southbridge/nvidia/ck804/id.inc
+crt0-y += ../../../../src/southbridge/nvidia/ck804/romstrap.inc
+crt0-y += ../../../../src/cpu/amd/car/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/southbridge/nvidia/ck804/id.lds
+ldscript-y += ../../../../src/southbridge/nvidia/ck804/romstrap.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl
+	iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl
+	mv dsdt.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+	$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h
+	$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S  $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
+	perl -e 's/\.rodata/.rom.data/g' -pi $@
+	perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+