- See Issue Tracker id-12 "lnxi-patch-12".

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2076 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 2 insertions, 48 deletions

diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c
index 7b75db20ab..d26e5a5f63 100644
--- a/src/mainboard/tyan/s2875/auto.c
+++ b/src/mainboard/tyan/s2875/auto.c
@@ -24,6 +24,7 @@
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "cpu/amd/mtrr/amd_earlymtrr.c"
 #include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
  
 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
 
@@ -112,11 +113,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "sdram/generic_sdram.c"
 #include "northbridge/amd/amdk8/resourcemap.c"
 
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
 #define FIRST_CPU  1
 #define SECOND_CPU 1
 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -149,47 +145,8 @@ static void main(unsigned long bist)
 
         int needs_reset;
 
-#if CONFIG_LOGICAL_CPUS==1
-        struct node_core_id id;
-#else
-        unsigned nodeid;
-#endif
-
         if (bist == 0) {
-                /* Skip this if there was a built in self test failure */
-                amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
-                set_apicid_cpuid_lo();
-#endif
-
-                enable_lapic();
-                init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
-                id = get_node_core_id_x();
-                if(id.coreid == 0) {
-                        if (cpu_init_detected(id.nodeid)) {
-                                asm volatile ("jmp __cpu_reset");
-                        }
-                        distinguish_cpu_resets(id.nodeid);
-//                        start_other_core(id.nodeid);
-                }
-#else
-                nodeid = lapicid();
-                if (cpu_init_detected(nodeid)) {
-                        asm volatile ("jmp __cpu_reset");
-                }
-                distinguish_cpu_resets(nodeid);
-#endif
-
-                if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1 
-                        || (id.coreid != 0)
-#endif
-                ) {
-                        stop_this_cpu(); // it will stop all cores except core0 of cpu0
-                }
+		k8_init_and_stop_secondaries();
         }
 
         w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -202,9 +159,6 @@ static void main(unsigned long bist)
         setup_default_resource_map();
         needs_reset = setup_coherent_ht_domain();
 
-#if CONFIG_LOGICAL_CPUS==1
-        start_other_cores();
-#endif
         needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
         if (needs_reset) {
                 print_info("ht reset -\r\n");