Run dos2unix on all files:

find . -type f| grep -v svn | xargs dos2unix

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 143 insertions, 143 deletions

diff --git a/src/mainboard/thomson/ip1000/gpio.c b/src/mainboard/thomson/ip1000/gpio.c
index 97231e52a0..d51bc90e78 100644
--- a/src/mainboard/thomson/ip1000/gpio.c
+++ b/src/mainboard/thomson/ip1000/gpio.c
@@ -1,143 +1,143 @@
-/*

- * This file is part of the coreboot project.

- *

- * Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>

- *

- * This program is free software; you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation; either version 2 of the License, or

- * (at your option) any later version.

- *

- * This program is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with this program; if not, write to the Free Software

- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA

- */

-

-#define PME_DEV			PNP_DEV(0x2e, 0x0a)

-#define PME_IO_BASE_ADDR	0x800      /* Runtime register base address */

-#define ICH_IO_BASE_ADDR	0x00000500 /* GPIO base address register */

-

-/* Early mainboard specific GPIO setup. */

-static void mb_gpio_init(void)

-{

-	device_t dev;

-	uint16_t port;

-	uint32_t set_gpio;

-

-	/* Southbridge GPIOs. */

-	/* Set the LPC device statically. */

-	dev = PCI_DEV(0x0, 0x1f, 0x0);

-

-	/* Set the value for GPIO base address register and enable GPIO. */

-	pci_write_config32(dev, GPIO_BASE_ICH0_5, (ICH_IO_BASE_ADDR | 1));

-	pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10);

-

-	/* Set GPIO23 to high, this enables the LAN controller. */

-	udelay(10);

-	set_gpio = inl(ICH_IO_BASE_ADDR + 0x0c);

-	set_gpio |= 1 << 23;

-	outl(set_gpio, ICH_IO_BASE_ADDR + 0x0c);

-

-	/* Super I/O GPIOs. */

-	dev = PME_DEV;

-	port = dev >> 8;

-

-	/* Enter the configuration state. */

-	outb(0x55, port);

-	pnp_set_logical_device(dev);

-	pnp_set_enable(dev, 0);

-	pnp_set_iobase(dev, PNP_IDX_IO0, PME_IO_BASE_ADDR);

-	pnp_set_enable(dev, 1);

-

-	/* GP21 - LED_RED */

-	outl(0x01, PME_IO_BASE_ADDR + 0x2c);

-

-	/* GP30 - FAN2_TACH */

-	outl(0x05, PME_IO_BASE_ADDR + 0x33); 

-

-	/* GP31 - FAN1_TACH */

-	outl(0x05, PME_IO_BASE_ADDR + 0x34);

-

-	/* GP32 - FAN2_CTRL */

-	outl(0x04, PME_IO_BASE_ADDR + 0x35); 

-

-	/* GP33 - FAN1_CTRL */

-	outl(0x04, PME_IO_BASE_ADDR + 0x36);

-

-	/* GP34 - AUD_MUTE_OUT_R */

-	outl(0x00, PME_IO_BASE_ADDR + 0x37);

-

-	/* GP36 - KBRST */

-	outl(0x00, PME_IO_BASE_ADDR + 0x39);

-

-	/* GP37 - A20GATE */

-	outl(0x00, PME_IO_BASE_ADDR + 0x3a);

-

-	/* GP42 - GPIO_PME_OUT */

-	outl(0x00, PME_IO_BASE_ADDR + 0x3d); 

-

-	/* GP50 - SER2_RI */

-	outl(0x05, PME_IO_BASE_ADDR + 0x3f);

-

-	/* GP51 - SER2_DCD */

-	outl(0x05, PME_IO_BASE_ADDR + 0x40);

-

-	/* GP52 - SER2_RX */

-	outl(0x05, PME_IO_BASE_ADDR + 0x41);

-

-	/* GP53 - SER2_TX */

-	outl(0x04, PME_IO_BASE_ADDR + 0x42);

-

-	/* GP55 - SER2_RTS */

-	outl(0x04, PME_IO_BASE_ADDR + 0x44);

-

-	/* GP56 - SER2_CTS */

-	outl(0x05, PME_IO_BASE_ADDR + 0x45);

-

-	/* GP57 - SER2_DTR */

-	outl(0x04, PME_IO_BASE_ADDR + 0x46);

-

-	/* GP60 - LED_GREEN */

-	outl(0x01, PME_IO_BASE_ADDR + 0x47);

-

-	/* GP61 - LED_YELLOW */

-	outl(0x01, PME_IO_BASE_ADDR + 0x48);

-

-	/* GP3 */

-	outl(0xc0, PME_IO_BASE_ADDR + 0x4d);

-

-	/* GP4 */

-	outl(0x04, PME_IO_BASE_ADDR + 0x4e);

-

-	/* FAN1 */

-	outl(0x01, PME_IO_BASE_ADDR + 0x56);

-

-	/* FAN2 */

-	outl(0x01, PME_IO_BASE_ADDR + 0x57);

-

-	/* Fan Control */

-	outl(0x50, PME_IO_BASE_ADDR + 0x58);

-

-	/* Fan1 Tachometer */

-	outl(0xff, PME_IO_BASE_ADDR + 0x59);

-

-	/* Fan2 Tachometer */

-	outl(0xff, PME_IO_BASE_ADDR + 0x5a);

-

-	/* LED1 */

-	outl(0x00, PME_IO_BASE_ADDR + 0x5d);

-

-	/* LED2 */

-	outl(0x00, PME_IO_BASE_ADDR + 0x5e);

-

-	/* Keyboard Scan Code */

-	outl(0x00, PME_IO_BASE_ADDR + 0x5f);

-

-	/* Exit the configuration state. */

-	outb(0xaa, port);

-}

+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define PME_DEV			PNP_DEV(0x2e, 0x0a)
+#define PME_IO_BASE_ADDR	0x800      /* Runtime register base address */
+#define ICH_IO_BASE_ADDR	0x00000500 /* GPIO base address register */
+
+/* Early mainboard specific GPIO setup. */
+static void mb_gpio_init(void)
+{
+	device_t dev;
+	uint16_t port;
+	uint32_t set_gpio;
+
+	/* Southbridge GPIOs. */
+	/* Set the LPC device statically. */
+	dev = PCI_DEV(0x0, 0x1f, 0x0);
+
+	/* Set the value for GPIO base address register and enable GPIO. */
+	pci_write_config32(dev, GPIO_BASE_ICH0_5, (ICH_IO_BASE_ADDR | 1));
+	pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10);
+
+	/* Set GPIO23 to high, this enables the LAN controller. */
+	udelay(10);
+	set_gpio = inl(ICH_IO_BASE_ADDR + 0x0c);
+	set_gpio |= 1 << 23;
+	outl(set_gpio, ICH_IO_BASE_ADDR + 0x0c);
+
+	/* Super I/O GPIOs. */
+	dev = PME_DEV;
+	port = dev >> 8;
+
+	/* Enter the configuration state. */
+	outb(0x55, port);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, PME_IO_BASE_ADDR);
+	pnp_set_enable(dev, 1);
+
+	/* GP21 - LED_RED */
+	outl(0x01, PME_IO_BASE_ADDR + 0x2c);
+
+	/* GP30 - FAN2_TACH */
+	outl(0x05, PME_IO_BASE_ADDR + 0x33); 
+
+	/* GP31 - FAN1_TACH */
+	outl(0x05, PME_IO_BASE_ADDR + 0x34);
+
+	/* GP32 - FAN2_CTRL */
+	outl(0x04, PME_IO_BASE_ADDR + 0x35); 
+
+	/* GP33 - FAN1_CTRL */
+	outl(0x04, PME_IO_BASE_ADDR + 0x36);
+
+	/* GP34 - AUD_MUTE_OUT_R */
+	outl(0x00, PME_IO_BASE_ADDR + 0x37);
+
+	/* GP36 - KBRST */
+	outl(0x00, PME_IO_BASE_ADDR + 0x39);
+
+	/* GP37 - A20GATE */
+	outl(0x00, PME_IO_BASE_ADDR + 0x3a);
+
+	/* GP42 - GPIO_PME_OUT */
+	outl(0x00, PME_IO_BASE_ADDR + 0x3d); 
+
+	/* GP50 - SER2_RI */
+	outl(0x05, PME_IO_BASE_ADDR + 0x3f);
+
+	/* GP51 - SER2_DCD */
+	outl(0x05, PME_IO_BASE_ADDR + 0x40);
+
+	/* GP52 - SER2_RX */
+	outl(0x05, PME_IO_BASE_ADDR + 0x41);
+
+	/* GP53 - SER2_TX */
+	outl(0x04, PME_IO_BASE_ADDR + 0x42);
+
+	/* GP55 - SER2_RTS */
+	outl(0x04, PME_IO_BASE_ADDR + 0x44);
+
+	/* GP56 - SER2_CTS */
+	outl(0x05, PME_IO_BASE_ADDR + 0x45);
+
+	/* GP57 - SER2_DTR */
+	outl(0x04, PME_IO_BASE_ADDR + 0x46);
+
+	/* GP60 - LED_GREEN */
+	outl(0x01, PME_IO_BASE_ADDR + 0x47);
+
+	/* GP61 - LED_YELLOW */
+	outl(0x01, PME_IO_BASE_ADDR + 0x48);
+
+	/* GP3 */
+	outl(0xc0, PME_IO_BASE_ADDR + 0x4d);
+
+	/* GP4 */
+	outl(0x04, PME_IO_BASE_ADDR + 0x4e);
+
+	/* FAN1 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x56);
+
+	/* FAN2 */
+	outl(0x01, PME_IO_BASE_ADDR + 0x57);
+
+	/* Fan Control */
+	outl(0x50, PME_IO_BASE_ADDR + 0x58);
+
+	/* Fan1 Tachometer */
+	outl(0xff, PME_IO_BASE_ADDR + 0x59);
+
+	/* Fan2 Tachometer */
+	outl(0xff, PME_IO_BASE_ADDR + 0x5a);
+
+	/* LED1 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5d);
+
+	/* LED2 */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5e);
+
+	/* Keyboard Scan Code */
+	outl(0x00, PME_IO_BASE_ADDR + 0x5f);
+
+	/* Exit the configuration state. */
+	outb(0xaa, port);
+}