summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro
diff options
context:
space:
mode:
authorCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2009-04-11 14:51:49 +0000
committerCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2009-04-11 14:51:49 +0000
commitebdc7c7cfebc14d503ab383e1493aa9fd10bd7e8 (patch)
tree9e3992f91a579ceb4aaee2352f5a7654a7bd7b71 /src/mainboard/supermicro
parent4eb37059cea9ad4fae2f959dc023f6537f722717 (diff)
Kill remaining unneeded CAR/ROMCC if-blocks.
Lots of Config.lb files still have "if USE_DCACHE_RAM" sections although USE_DCACHE_RAM is always set for them. Such checks are not only pointless, they actively make the files hard to read. A full abuild run confirmed that compilation did not change with this patch applied. The patch does not change whitespace of the remaining code to ease review and svn blame. With this change, it should be possible to have two or three Config.lb variants in total (except the actual hardware config). Right now, some Config.lb have comments, some don't, some have empty lines for better readability, some don't, some have leading whitespace, some don't. This is an utter mess and unifying these files would certainly reduce the headaches I have when looking at them. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/supermicro')
-rw-r--r--src/mainboard/supermicro/h8dme/Config.lb15
-rw-r--r--src/mainboard/supermicro/h8dmr/Config.lb15
2 files changed, 0 insertions, 30 deletions
diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb
index 616e582442..fc696b2546 100644
--- a/src/mainboard/supermicro/h8dme/Config.lb
+++ b/src/mainboard/supermicro/h8dme/Config.lb
@@ -77,7 +77,6 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
@@ -93,8 +92,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -124,7 +121,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -132,8 +128,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -177,12 +171,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -191,29 +183,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-end
##
## Include the secondary Configuration files
diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb
index ed0c1101f8..ea6abb65d5 100644
--- a/src/mainboard/supermicro/h8dmr/Config.lb
+++ b/src/mainboard/supermicro/h8dmr/Config.lb
@@ -80,7 +80,6 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
@@ -96,8 +95,6 @@ if USE_DCACHE_RAM
end
end
-end
-
if USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
@@ -127,7 +124,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -135,8 +131,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
@@ -180,12 +174,10 @@ else
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -194,29 +186,22 @@ end
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-end
##
## Include the secondary Configuration files