newconfig is no more.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 0 insertions, 415 deletions

diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb
deleted file mode 100644
index dc2dd1265f..0000000000
--- a/src/mainboard/supermicro/x6dhr_ig/Config.lb
+++ /dev/null
@@ -1,187 +0,0 @@
-##
-## Only use the option table in a normal image
-##
-default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-if CONFIG_HAVE_HARD_RESET object reset.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE 
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup 
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds 
-	mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit cpu/x86/sse_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse_disable.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files 
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/e7520 # mch
-	device pci_domain 0 on 
-		chip southbridge/intel/i82801er # i82801er
-			# USB ports
-			device pci 1d.0 on end
-			device pci 1d.1 on end
-			device pci 1d.2 on end 
-			device pci 1d.3 on end
-			device pci 1d.7 on end
-		
-			# -> VGA
-			device pci 1e.0 on end
-		
-			# -> IDE
-			device pci 1f.0 on 
-				chip superio/winbond/w83627hf
-					device pnp 2e.0 off end
-					device pnp 2e.2 on 
-						 io 0x60 = 0x3f8
-						irq 0x70 = 4
-					end
-					device pnp 2e.3 on
-						 io 0x60 = 0x2f8
-						irq 0x70 = 3
-					end
-					device pnp 2e.4 off end
-					device pnp 2e.5 off end
-					device pnp 2e.6 off end
-					device pnp 2e.7 off end
-					device pnp 2e.9 off end
-					device pnp 2e.a on  end
-					device pnp 2e.b off end
-				end
-			end
-			device pci 1f.1 on end
-			device pci 1f.2 on end
-			device pci 1f.3 on end
-
-			register "pirq_a_d" = "0x0b070a05"
-			register "pirq_e_h" = "0x0a808080"
-		end
-		device pci 00.0 on end 
-		device pci 00.1  on end
-		device pci 01.0 on end 
-		device pci 02.0 on end 
-		device pci 03.0 on 
-			chip southbridge/intel/pxhd # pxhd1
-				# Bus bridges and ioapics usually bus 2
-				device pci 0.0 on end
-				device pci 0.1 on end
-				device pci 0.2 on 
-				# On board gig e1000
-					chip drivers/generic/generic 
-        		        	        device pci 02.0 on end
-        		        	        device pci 02.1 on end
-        		        	end
-				end
-				device pci 0.3 on end
-			end
-		end
-		device pci 04.0 on 
-			chip southbridge/intel/pxhd # pxhd2
-				# Bus bridges and ioapics usually bus 5
-				device pci 0.0 on end
-				# Slot 6  is usually 6:2.0
-				device pci 0.1 on end
-				device pci 0.2 on end
-				# Slot 7 is usually 7:2.0
-				device pci 0.3 on end
-			end
-		end
-		device pci 06.0 on end
-	end
-	device apic_cluster 0 on
-		chip cpu/intel/socket_mPGA604 # cpu 0
-			device apic 0 on end
-		end
-		chip cpu/intel/socket_mPGA604 # cpu 1
-			device apic 6 on end
-		end
-	end
-	register "intrline" = "0x00070105"
-end
-
diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb
deleted file mode 100644
index d8b836bfc4..0000000000
--- a/src/mainboard/supermicro/x6dhr_ig/Options.lb
+++ /dev/null
@@ -1,228 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_BTEXT
-uses CC
-uses HOSTCC
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_OBJCOPY
-
-
-###
-### Build options
-###
-
-##
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-##
-default CONFIG_ROM_SIZE=1048576
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT=1
-
-##
-## Delay timer options
-## Use timer2
-## 
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE=1
-default CONFIG_IRQ_SLOT_COUNT=15
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default CONFIG_GENERATE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default CONFIG_LB_CKS_RANGE_START=49
-default CONFIG_LB_CKS_RANGE_END=122
-default CONFIG_LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=4
-default CONFIG_LOGICAL_CPUS=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default CONFIG_MAINBOARD_PART_NUMBER="X6DHR"
-default CONFIG_MAINBOARD_VENDOR=     "Supermicro"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 32K heap
-##
-default CONFIG_HEAP_SIZE=0x8000
-
-
-###
-### Compute the location and size of where this firmware image
-### (coreboot plus bootloader) will live in the boot rom chip.
-###
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default CONFIG_RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_PAYLOAD=1
-
-
-###
-### Defaults of options that you may want to override in the target config file
-### 
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG      1   system is unusable               
-## ALERT      2   action must be taken immediately 
-## CRIT       3   critical conditions              
-## ERR        4   error conditions                 
-## WARNING    5   warning conditions               
-## NOTICE     6   normal but significant condition 
-## INFO       7   informational                    
-## CONFIG_DEBUG      8   debug-level messages             
-## SPEW       9   Way too many details             
-
-## Request this level of debugging output
-default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-##
-## Don't enable the btext console
-##
-default  CONFIG_CONSOLE_BTEXT=0
-
-
-### End Options.lb
-end