This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 91 insertions, 91 deletions

diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb
index 837beb45f4..7d70dcf5db 100644
--- a/src/mainboard/supermicro/x6dhr_ig/Config.lb
+++ b/src/mainboard/supermicro/x6dhr_ig/Config.lb
@@ -1,10 +1,10 @@
 ##
 ## Only use the option table in a normal image
 ##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
 
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 128 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 128 * 1024
 include /config/nofailovercalculation.lb
 
 ##
@@ -18,30 +18,30 @@ arch i386 end
 ##
 
 driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_MP_TABLE object mptable.o end
+if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
 object reset.o
 
 ##
 ## Romcc output
 ##
 makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+	depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" 
+	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
 end
 
 makerule ./failover.inc
-	depends "$(MAINBOARD)/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+	depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
+	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
 end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+	depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" 
+	action	"../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
 end
 makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+	depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
+	action	"../romcc    -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
 end
 
 ##
@@ -55,7 +55,7 @@ ldscript /cpu/x86/32bit/entry32.lds
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if USE_FALLBACK_IMAGE 
+if CONFIG_USE_FALLBACK_IMAGE 
 	mainboardinit cpu/x86/16bit/reset16.inc
 	ldscript /cpu/x86/16bit/reset16.lds
 else
@@ -77,7 +77,7 @@ ldscript /arch/i386/lib/id.lds
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
 	ldscript /arch/i386/lib/failover.lds 
 	mainboardinit ./failover.inc
 end
diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb
index 808fe21018..b6f853242a 100644
--- a/src/mainboard/supermicro/x6dhr_ig/Options.lb
+++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb
@@ -1,57 +1,57 @@
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_LOGICAL_CPUS
 uses CONFIG_MAX_CPUS
 uses CONFIG_IOAPIC
 uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
 uses COREBOOT_EXTRA_VERSION
 uses CONFIG_UDELAY_TSC
 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses _RAMBASE
+uses CONFIG_RAMBASE
 uses CONFIG_GDB_STUB
 uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
 uses CONFIG_CONSOLE_BTEXT
 uses CC
-uses HOSTCC
-uses CROSS_COMPILE
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_CROSS_COMPILE
+uses CONFIG_OBJCOPY
 
 
 ###
@@ -59,14 +59,14 @@ uses OBJCOPY
 ###
 
 ##
-## ROM_SIZE is the size of boot ROM that this board will use.
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
 ##
-default ROM_SIZE=1048576
+default CONFIG_ROM_SIZE=1048576
 
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
 
 ##
 ## Delay timer options
@@ -78,31 +78,31 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
 
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=16
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=16
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
 
 ##
 ## Move the default coreboot cmos range off of AMD RTC registers
 ##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
 
 ##
 ## Build code for SMP support
@@ -120,39 +120,39 @@ default CONFIG_IOAPIC=1
 ##
 ## Clean up the motherboard id strings
 ##
-default MAINBOARD_PART_NUMBER="X6DHR"
-default MAINBOARD_VENDOR=     "Supermicro"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580
+default CONFIG_MAINBOARD_PART_NUMBER="X6DHR"
+default CONFIG_MAINBOARD_VENDOR=     "Supermicro"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 32K heap
 ##
-default HEAP_SIZE=0x8000
+default CONFIG_HEAP_SIZE=0x8000
 
 
 ###
 ### Compute the location and size of where this firmware image
 ### (coreboot plus bootloader) will live in the boot rom chip.
 ###
-default FALLBACK_SIZE=131072
+default CONFIG_FALLBACK_SIZE=131072
 
 ##
 ## Coreboot C code runs at this location in RAM
 ##
-default _RAMBASE=0x00004000
+default CONFIG_RAMBASE=0x00004000
 
 ##
 ## Load the payload from the ROM
@@ -167,8 +167,8 @@ default CONFIG_ROM_PAYLOAD=1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 ##
 ## Disable the gdb stub by default
@@ -183,21 +183,21 @@ default CONFIG_GDB_STUB=0
 default CONFIG_CONSOLE_SERIAL8250=1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ### Select the coreboot loglevel
@@ -209,17 +209,17 @@ default TTYS0_LCS=0x3
 ## WARNING    5   warning conditions               
 ## NOTICE     6   normal but significant condition 
 ## INFO       7   informational                    
-## DEBUG      8   debug-level messages             
+## CONFIG_DEBUG      8   debug-level messages             
 ## SPEW       9   Way too many details             
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 ##
 ## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ##
 ## Don't enable the btext console
diff --git a/src/mainboard/supermicro/x6dhr_ig/auto.c b/src/mainboard/supermicro/x6dhr_ig/auto.c
index 92020189d2..722157b454 100644
--- a/src/mainboard/supermicro/x6dhr_ig/auto.c
+++ b/src/mainboard/supermicro/x6dhr_ig/auto.c
@@ -103,7 +103,7 @@ static void main(unsigned long bist)
 	outb(0x87,0x2e);
 	outb(0x87,0x2e);
 	pnp_write_config(CONSOLE_SERIAL_DEV, 0x24, 0x84 | (1 << 6));
-	w83627hf_enable_dev(CONSOLE_SERIAL_DEV, TTYS0_BASE);
+	w83627hf_enable_dev(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();