diff options
author | Michael Niewöhner <foss@mniewoehner.de> | 2020-12-06 14:17:02 +0100 |
---|---|---|
committer | Michael Niewöhner <foss@mniewoehner.de> | 2020-12-10 02:25:13 +0000 |
commit | 7f623f8e466f2eb45d9b571f7e752f42eee5c3db (patch) | |
tree | 08e159bd0b9da1dbab0b7791a2ae9f392b10f7bc /src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f | |
parent | 5d7fa16c5c7e625371a1fcffedff99027f8b35d8 (diff) |
mb/supermicro/x11ssm-f: (re)configure and document various pads
(Re)configure various pads found by dissecting a dead board and vendor
firmware, as well as the BMC firmware:
- GPP_B14: input connected to jumper JBR1 - could be used to implement
"BIOS Recovery" ("Top-Block Swap") functionality; external pull-up
- GPP_C20: output to BMC alert CPU_THROTTLED# - can be used to notify
the BMC about a thermal throttling event. Not implemented in vendor
firmware.
- GPP_C23: input connected to the CPU's CATERR# output; external pull-up
Not actively used by vendor firmware.
- GPP_D1: output connected to on-board and front panel power LEDs
- GPP_D18: output connected to PERST# of both CPU PCIe Slots. Can be
used for testing/debugging only, since it resets both slots at once.
Not actively used by vendor firmware.
- GPP_D19: output connected to PERST# of both PCH PCIe Slots. Can be
used for testing/debugging only, since it resets both slots at once.
Not actively used by vendor firmware.
- GPP_D22: input connected to the BMC enable/disable jumper JPB1; Will
be used later in CB:48096 and CB:48097; external pull-up
- GPP_G0 - GPP_G3: dedicated/integrated CPU switching; probably not
useful, since the IGD is not connected to any ports on this board.
External pulls ensure correct function of a dGPU even without driving
the gpios. Not used by vendor firmware.
- GPP_G12 - GPP_G16: inputs for binary SKU_ID; external pulls
- GPP_G20: PWRFAIL# input from JPI2C1 (pin 3); external pull-up; Not
used by vendor firmware.
Also add comments for documentation. While at it, mark ME-owned pads as
reserved.
Change-Id: I9f9328e9ce6f7e291b171f776bb98bc617b64b93
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Diffstat (limited to 'src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f')
-rw-r--r-- | src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/gpio.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/gpio.c b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/gpio.c index 335171e446..0b658acbf8 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/gpio.c +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/gpio.c @@ -46,26 +46,26 @@ static const struct pad_config gpio_table[] = { PAD_CFG_GPO_GPIO_DRIVER(GPP_B11, 0, DEEP, NONE), PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B14, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_B14, NONE, PLTRST, NF1), /* SPKR + JBR1 ("Top-Block Swap") */ PAD_NC(GPP_B15, NONE), PAD_NC(GPP_B16, NONE), PAD_NC(GPP_B17, NONE), PAD_NC(GPP_B18, NONE), PAD_NC(GPP_B19, NONE), - PAD_CFG_GPO_GPIO_DRIVER(GPP_B20, 1, PLTRST, NONE), + PAD_CFG_GPO(GPP_B20, 0, PLTRST), /* BMC POST_COMPLETE */ PAD_NC(GPP_B21, NONE), PAD_NC(GPP_B22, NONE), PAD_CFG_NF(GPP_B23, NONE, DEEP, NF2), /* GPIO Group GPP_C */ - // PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), - // PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + /* GPP_C0 - RESERVED */ + /* GPP_C1 - RESERVED */ PAD_NC(GPP_C2, NONE), - // PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), - // PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + /* GPP_C3 - RESERVED */ + /* GPP_C4 - RESERVED */ PAD_CFG_GPO_GPIO_DRIVER(GPP_C5, 1, DEEP, NONE), - // PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1), - // PAD_CFG_NF(GPP_C7, NONE, DEEP, NF1), + /* GPP_C6 - RESERVED */ + /* GPP_C7 - RESERVED */ PAD_CFG_GPI_INT(GPP_C8, NONE, PLTRST, OFF), PAD_CFG_GPI_INT(GPP_C9, NONE, PLTRST, OFF), PAD_CFG_GPI_INT(GPP_C10, NONE, PLTRST, OFF), @@ -78,14 +78,14 @@ static const struct pad_config gpio_table[] = { PAD_NC(GPP_C17, NONE), PAD_NC(GPP_C18, NONE), PAD_NC(GPP_C19, NONE), - PAD_NC(GPP_C20, NONE), + PAD_CFG_GPO(GPP_C20, 1, PLTRST), /* BMC alert CPU_THROTTLED# */ PAD_NC(GPP_C21, NONE), PAD_CFG_GPI_SMI_LOW(GPP_C22, UP_20K, DEEP, EDGE_SINGLE), /* BMC SMI# */ - PAD_NC(GPP_C23, NONE), + PAD_CFG_GPI(GPP_C23, NONE, PLTRST), /* CPU CATERR# */ /* GPIO Group GPP_D */ PAD_NC(GPP_D0, NONE), - PAD_CFG_GPO_GPIO_DRIVER(GPP_D1, 1, DEEP, NONE), + PAD_CFG_GPO_GPIO_DRIVER(GPP_D1, 1, DEEP, NONE), /* Power LEDs onboard + JF1 */ PAD_CFG_GPI_NMI(GPP_D2, UP_20K, DEEP, EDGE_SINGLE, INVERT), /* BMC NMI# */ PAD_NC(GPP_D3, NONE), PAD_CFG_GPO_GPIO_DRIVER(GPP_D4, 0, PLTRST, NONE), @@ -102,11 +102,11 @@ static const struct pad_config gpio_table[] = { PAD_NC(GPP_D15, NONE), PAD_NC(GPP_D16, NONE), PAD_NC(GPP_D17, NONE), - PAD_CFG_GPO_GPIO_DRIVER(GPP_D18, 1, PLTRST, NONE), - PAD_CFG_GPO_GPIO_DRIVER(GPP_D19, 1, PLTRST, NONE), + PAD_CFG_GPO_GPIO_DRIVER(GPP_D18, 1, PLTRST, NONE), /* PERST# CPU PCIe Slots */ + PAD_CFG_GPO_GPIO_DRIVER(GPP_D19, 1, PLTRST, NONE), /* PERST# PCH PCIe Slots */ PAD_NC(GPP_D20, NONE), PAD_CFG_GPO_GPIO_DRIVER(GPP_D21, 0, DEEP, NONE), - PAD_CFG_GPI_INT(GPP_D22, NONE, RSMRST, OFF), + PAD_CFG_GPI(GPP_D22, NONE, RSMRST), /* BMC enable/disable jumper JPB1 */ PAD_NC(GPP_D23, NONE), /* GPIO Group GPP_E */ @@ -151,10 +151,10 @@ static const struct pad_config gpio_table[] = { PAD_CFG_GPO_GPIO_DRIVER(GPP_F23, 0, RSMRST, NONE), /* GPIO Group GPP_G */ - PAD_CFG_GPI_INT(GPP_G0, NONE, DEEP, OFF), - PAD_CFG_GPI_INT(GPP_G1, NONE, DEEP, OFF), - PAD_CFG_GPI_INT(GPP_G2, NONE, DEEP, OFF), - PAD_CFG_GPI_INT(GPP_G3, NONE, DEEP, OFF), + PAD_NC(GPP_G0, NONE), /* JPCIE6-A19 (DGPU_PWR_EN#) */ + PAD_NC(GPP_G1, NONE), /* JPCIE6-B32 (DGPU_PWR_OK) */ + PAD_NC(GPP_G2, NONE), /* JPCIE6-B30 (DGPU_SEL#) */ + PAD_NC(GPP_G3, NONE), /* JPCIE6-B82 (DGPU_PRSNT#) */ PAD_NC(GPP_G4, NONE), PAD_NC(GPP_G5, NONE), PAD_NC(GPP_G6, NONE), @@ -163,15 +163,15 @@ static const struct pad_config gpio_table[] = { PAD_NC(GPP_G9, NONE), PAD_NC(GPP_G10, NONE), PAD_NC(GPP_G11, NONE), - PAD_CFG_GPI_INT(GPP_G12, NONE, PLTRST, OFF), - PAD_CFG_GPI_INT(GPP_G13, NONE, PLTRST, OFF), - PAD_CFG_GPI_INT(GPP_G14, NONE, PLTRST, OFF), - PAD_CFG_GPI_INT(GPP_G15, NONE, PLTRST, OFF), - PAD_CFG_GPI_INT(GPP_G16, NONE, PLTRST, OFF), + PAD_CFG_GPI(GPP_G12, NONE, PLTRST), /* SKU_ID[0] */ + PAD_CFG_GPI(GPP_G13, NONE, PLTRST), /* SKU_ID[1] */ + PAD_CFG_GPI(GPP_G14, NONE, PLTRST), /* SKU_ID[2] */ + PAD_CFG_GPI(GPP_G15, NONE, PLTRST), /* SKU_ID[3] */ + PAD_CFG_GPI(GPP_G16, NONE, PLTRST), /* SKU_ID[4] */ PAD_NC(GPP_G17, NONE), PAD_CFG_NF(GPP_G18, NONE, DEEP, NF1), /* BMC NMI# */ PAD_CFG_NF(GPP_G19, NONE, DEEP, NF1), /* BMC SMI# */ - PAD_NC(GPP_G20, NONE), + PAD_CFG_GPI(GPP_G20, NONE, PLTRST), /* JPI2C1 PWRFAIL# */ PAD_NC(GPP_G21, NONE), PAD_NC(GPP_G22, NONE), PAD_NC(GPP_G23, NONE), |