Remove failover/fallback/normal handling in mainboards'

romstage.c. That's newconfig stuff.

1. In failover_process(), I removed the fallback/normal selection logic
and kept the remaining hardware init in. The if-clauses' conditions are
reverted to match.
Remove #if failover||fallback guard.

2. Change cache_as_ram_main() to first call failover_process, then
real_main unconditionally.

3. Move failover_process's code to the beginning of real_main, remove
failover_process and its call in cache_as_ram_main.

4. Remove cache_as_ram_main, rename real_main to cache_as_ram_main (same
arguments, so no problem with that)


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5255 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 13 insertions, 68 deletions

diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c
index 72d5809ea4..6b42690c3b 100644
--- a/src/mainboard/supermicro/h8dme/romstage.c
+++ b/src/mainboard/supermicro/h8dme/romstage.c
@@ -193,8 +193,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #endif
 
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
-
 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -223,78 +221,13 @@ static void sio_setup(void)
 
 }
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	u32 last_boot_normal_x = last_boot_normal();
-
-	/* Is this a cpu only reset? or Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal_x) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the mcp55 */
-	mcp55_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal_x) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */
-	    );
-
-      fallback_image:
-#if CONFIG_HAVE_FAILOVER_BOOT==1
-	__asm__ volatile ("jmp __fallback_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */
-	    )
-#endif
-	;
-}
-#endif
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-#if CONFIG_HAVE_FAILOVER_BOOT==1
-#if CONFIG_USE_FAILOVER_IMAGE==1
-	failover_process(bist, cpu_init_detectedx);
-#else
-	real_main(bist, cpu_init_detectedx);
-#endif
-#else
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-#endif
-}
-
 /* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */
 #define RC0 (2<<8)
 #define RC1 (1<<8)
 
 #if CONFIG_USE_FAILOVER_IMAGE==0
 
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 /* The SPD is being read from the CPU1 (marked CPU2 on the board) and we
    don't know how to switch the SMBus to decode the CPU0 SPDs. So, The
@@ -319,6 +252,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	int needs_reset = 0;
 	unsigned bsp_apicid = 0;
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the mcp55 */
+		mcp55_enable_rom();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}