diff options
| author | Mario Scheithauer <mario.scheithauer@siemens.com> | 2018-08-22 13:03:55 +0200 |
|---|---|---|
| committer | Martin Roth <martinroth@google.com> | 2018-08-28 14:18:40 +0000 |
| commit | 403458e7ec0fae1345cd82128b71d5ab0b66fd77 (patch) | |
| tree | 43de83e3208afbb6c7feb16aba7d203a127dedeb /src/mainboard/siemens/mc_apl1 | |
| parent | 24ad29e83c3b5d46c7ba458a504f63eb034837c7 (diff) | |
siemens/mc_apl1: Extend circuit life by clock gating and power gating
The firmware of devices connected to LPC should deassert the LPC CLKRUN#
signal when there is no bus activity on LPC.
Necessary changes:
- Enable LPC CLKRUN#
- Enable LPC PCE (Power Control Enable)
- Enable LPC CCE (Clock Control Enable)
- Remove I/O decoding range on LPC for COM 3
- Disable I/O UART driver
Change-Id: I2fd80e3fdcf23658f97b8182a77df7e09ddf25d6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/28268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Diffstat (limited to 'src/mainboard/siemens/mc_apl1')
3 files changed, 13 insertions, 6 deletions
diff --git a/src/mainboard/siemens/mc_apl1/variants/baseboard/gpio.c b/src/mainboard/siemens/mc_apl1/variants/baseboard/gpio.c index 02d0601482..28aad8aa92 100644 --- a/src/mainboard/siemens/mc_apl1/variants/baseboard/gpio.c +++ b/src/mainboard/siemens/mc_apl1/variants/baseboard/gpio.c @@ -84,7 +84,7 @@ static const struct pad_config gpio_table[] = { PAD_CFG_NF(LPC_AD1, NONE, DEEP, NF1), /* LPC_AD1 */ PAD_CFG_NF(LPC_AD2, NONE, DEEP, NF1), /* LPC_AD2 */ PAD_CFG_NF(LPC_AD3, NONE, DEEP, NF1), /* LPC_AD3 */ - PAD_CFG_GPI(LPC_CLKRUNB, NONE, DEEP), /* LPC_CLKRUN_N */ + PAD_CFG_NF(LPC_CLKRUNB, NONE, DEEP, NF1), /* LPC_CLKRUN_N */ PAD_CFG_NF(LPC_FRAMEB, NONE, DEEP, NF1), /* LPC_FRAME_N */ /* West Community */ @@ -402,7 +402,7 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_NF(LPC_AD1, NONE, DEEP, NF1), /* LPC_AD1 */ PAD_CFG_NF(LPC_AD2, NONE, DEEP, NF1), /* LPC_AD2 */ PAD_CFG_NF(LPC_AD3, NONE, DEEP, NF1), /* LPC_AD3 */ - PAD_CFG_GPI(LPC_CLKRUNB, NONE, DEEP), /* LPC_CLKRUN_N */ + PAD_CFG_NF(LPC_CLKRUNB, NONE, DEEP, NF1), /* LPC_CLKRUN_N */ PAD_CFG_NF(LPC_FRAMEB, NONE, DEEP, NF1), /* LPC_FRAME_N */ }; diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl1/Kconfig b/src/mainboard/siemens/mc_apl1/variants/mc_apl1/Kconfig index a265ca3635..1ed260945b 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl1/Kconfig +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl1/Kconfig @@ -5,7 +5,6 @@ config BOARD_SIEMENS_MC_APL1_VAR def_bool y select DRIVER_INTEL_I210 select DRIVERS_I2C_RX6110SA - select DRIVERS_UART_8250IO select DRIVER_SIEMENS_NC_FPGA select NC_FPGA_NOTIFY_CB_READY select APL_SKIP_SET_POWER_LIMITS diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl1/mainboard.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl1/mainboard.c index da01ce3905..099b67b01d 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl1/mainboard.c +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl1/mainboard.c @@ -42,9 +42,6 @@ void variant_mainboard_final(void) else printk(BIOS_INFO, "LCD: Set up PTN was successful.\n"); - /* Enable additional I/O decoding range on LPC for COM 3 */ - lpc_open_pmio_window(0x3e8, 8); - /* * PIR6 register mapping for PCIe root ports * INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA# @@ -55,6 +52,17 @@ void variant_mainboard_final(void) dev = dev_find_device(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2001, 0); if (dev) pci_write_config8(dev, 0xd8, 0x3e); + + /* Enable CLKRUN_EN for power gating LPC */ + lpc_enable_pci_clk_cntl(); + + /* + * Enable LPC PCE (Power Control Enable) by setting IOSF-SB port 0xD2 + * offset 0x341D bit3 and bit0. + * Enable LPC CCE (Clock Control Enable) by setting IOSF-SB port 0xD2 + * offset 0x341C bit [3:0]. + */ + pcr_or32(PID_LPC, PCR_LPC_PRC, (PCR_LPC_CCE_EN | PCR_LPC_PCE_EN)); } static void wait_for_legacy_dev(void *unused) |