mb/purism/librem_jsl: Add support for Librem 11

This adds support for the Librem 11 tablet, using the ME 13.50.15.1436
binary from the original BIOS (version 28.D8.E1.021) and FSP binaries
from a Jasper Lake Chromebook.

The following features were tested with PureOS:
* Audio (speakers, microphone, headset jack)
* Cameras
* Display
* Touchscreen and pen
* Keyboard cover, with tablet/laptop mode switch indicated via ACPI
* Power and volume buttons
* USB-C ports (USB 2/3, DP alt mode, PD charging)
* SD card reader
* WLAN
* Bluetooth
* NVMe SSD (socketed)
* Battery state information from EC
* Accelerometer

A UART is accessible with soldering via test points on the mainboard,
documented in the mainboard Kconfig with a toggle to enable it for
coreboot logging.

Change-Id: I545994889ddfb41f56de09b3a42840bccbd7c4aa
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>

20 files changed, 1171 insertions, 0 deletions

diff --git a/src/mainboard/purism/librem_jsl/Kconfig b/src/mainboard/purism/librem_jsl/Kconfig
new file mode 100644
index 0000000000..dc4c5e24b8
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/Kconfig
@@ -0,0 +1,82 @@
+config BOARD_PURISM_BASEBOARD_LIBREM_JSL
+	def_bool n
+	select BOARD_ROMSIZE_KB_16384
+	select DRIVERS_GENERIC_CBFS_SERIAL
+	select DRIVERS_USB_ACPI
+	select DRIVERS_I2C_GENERIC
+	select DRIVERS_I2C_HID
+	select EC_ACPI
+	select HAVE_ACPI_RESUME
+	select HAVE_ACPI_TABLES
+	select HAVE_SPD_IN_CBFS
+	select INTEL_GMA_HAVE_VBT
+	select NO_UART_ON_SUPERIO
+	select SOC_INTEL_COMMON_BLOCK_HDA_VERB
+	select SOC_INTEL_JASPERLAKE
+	select SYSTEM_TYPE_DETACHABLE
+	select USE_LEGACY_8254_TIMER
+
+config BOARD_PURISM_LIBREM_11
+	select BOARD_PURISM_BASEBOARD_LIBREM_JSL
+
+if BOARD_PURISM_BASEBOARD_LIBREM_JSL
+
+config MAINBOARD_DIR
+	default "purism/librem_jsl"
+
+config MAINBOARD_FAMILY
+	string
+	default "Librem 11" if BOARD_PURISM_BASEBOARD_LIBREM_JSL
+
+config MAINBOARD_PART_NUMBER
+	default "Librem 11" if BOARD_PURISM_BASEBOARD_LIBREM_JSL
+
+config MAX_CPUS
+	int
+	default 4
+
+config CBFS_SIZE
+	default 0x700000 if BOARD_PURISM_BASEBOARD_LIBREM_JSL
+
+config DIMM_MAX
+	default 2
+
+config DIMM_SPD_SIZE
+	default 512
+
+config VGA_BIOS_ID
+	string
+	default "8086,4e61" if BOARD_PURISM_BASEBOARD_LIBREM_JSL
+
+config NO_POST
+	default y
+
+config INTEL_GMA_VBT_FILE
+	default "src/mainboard/purism/librem_jsl/data.vbt"
+
+config ENABLE_UART2
+	bool "Enable UART2 debug output"
+	default n
+	select INTEL_LPSS_UART_FOR_CONSOLE
+	help
+	  Enable UART2 for debug output.
+
+	  This UART can be used for boot logging by coreboot and payloads.
+
+	  For Linux, boot with `console=uart,mmio32,0xfe032000,115200n8`.
+	  (0xfe032000 is CONSOLE_UART_BASE_ADDRESS for Jasper Lake.)  Blacklist
+	  intel_lpss_pci so it does not reconfigure the UART.
+
+	  Soldering is required to access these signals.  On the reverse side of
+	  the board, there are two test points directly underneath the SoC (the
+	  only two test points between the heatsink screw holes).  The pad
+	  nearest the M.2 socket is TX, the other is RX.  The signals are 3.3V
+	  (do NOT connect directly to an RS-232 serial port).
+
+config UART_FOR_CONSOLE
+	default 2 if ENABLE_UART2
+
+config FSP_TEMP_RAM_SIZE
+	default 0x28000
+
+endif
diff --git a/src/mainboard/purism/librem_jsl/Kconfig.name b/src/mainboard/purism/librem_jsl/Kconfig.name
new file mode 100644
index 0000000000..93f95c0f69
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_PURISM_LIBREM_11
+	bool "Librem 11"
diff --git a/src/mainboard/purism/librem_jsl/Makefile.inc b/src/mainboard/purism/librem_jsl/Makefile.inc
new file mode 100644
index 0000000000..7fd4d59f90
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/Makefile.inc
@@ -0,0 +1,6 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+bootblock-y += bootblock.c
+ramstage-y += ramstage.c
+ramstage-y += hda_verb.c
+SPD_SOURCES += isocon8gb
diff --git a/src/mainboard/purism/librem_jsl/acpi/ac.asl b/src/mainboard/purism/librem_jsl/acpi/ac.asl
new file mode 100644
index 0000000000..86267e8eba
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/ac.asl
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Device (AC)
+{
+	Name (_HID, "ACPI0003" /* Power Source Device */)  // _HID: Hardware ID
+	Name (_PCL, Package (0x01)  // _PCL: Power Consumer List
+	{
+		_SB
+	})
+
+	Name (ACEX, One)
+
+	Method (_PSR, 0, NotSerialized)  // _PSR: Power Source
+	{
+		Printf ("AC: _PSR: %o", ACEX)
+		Return (ACEX)
+	}
+
+	Method (_STA, 0, NotSerialized)  // _STA: Status
+	{
+		Return (0x0F)
+	}
+}
diff --git a/src/mainboard/purism/librem_jsl/acpi/battery.asl b/src/mainboard/purism/librem_jsl/acpi/battery.asl
new file mode 100644
index 0000000000..73d5d65c97
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/battery.asl
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Device (BAT0)
+{
+	Name (_HID, EisaId ("PNP0C0A") /* Control Method Battery */)  // _HID: Hardware ID
+	Name (_UID, Zero)  // _UID: Unique ID
+	Name (_PCL, Package (0x01)  // _PCL: Power Consumer List
+	{
+		_SB
+	})
+
+	Name (BTEX, Zero)
+
+	// Test if EC0 is ready, and if it is, if the battery is present
+	Method (BTOK, 0, NotSerialized)
+	{
+		If (^^ECOK) {
+			If (BTEX) {
+				Return (One)
+			}
+		}
+
+		Return (Zero)
+	}
+
+	Method (_STA, 0, NotSerialized)  // _STA: Status
+	{
+		If (BTOK ()) {
+			Printf ("BAT0: _STA: present")
+			Return (0x1F)
+		}
+
+		Printf ("BAT0: _STA: not present")
+		Return (0x0F)
+	}
+
+	Name (PBIF, Package (0x0D)	// Persistent battery information
+	{
+		One, // 0 - Power Unit - mA/mAh
+		0xFFFFFFFF, // 1 - Design Capacity
+		0xFFFFFFFF, // 2 - Last Full Charge Capacity
+		One, // 3 - Battery Technology
+		0xFFFFFFFF, // 4 - Design Voltage
+		Zero, // 5 - Design Capacity of Warning
+		Zero, // 6 - Design Capacity of Low
+		Zero, // 7 - Battery Capacity Granularity 1
+		Zero, // 8 - Battery Capacity Granularity 2
+		"", // 9 - Model Number
+		"", // 10 - Serial Number
+		"", // 11 - Battery Type
+		"" // 12 - OEM Information
+	})
+
+	Method (IVBI, 0, NotSerialized)	// Set invalid battery information
+	{
+		PBIF [1] = 0xFFFFFFFF
+		PBIF [2] = 0xFFFFFFFF
+		PBIF [5] = Zero
+		PBIF [6] = Zero
+		PBIF [7] = Zero
+		PBIF [8] = Zero
+		PBIF [9] = ""
+		PBIF [10] = ""
+		PBIF [11] = ""
+	}
+
+	Method (UPBI, 0, Serialized)	// Update battery information
+	{
+		If (BTOK ()) {
+			Local0 = ^^BTDC // design cap
+			Local1 = ^^BTFC // last full capacity
+			// Design capacity
+			PBIF [1] = Local0
+			// Last full charge capacity
+			PBIF [2] = Local1
+			// Warn/low capacities - 15% and 10% of design capacity
+			PBIF [5] = Local1 * 15 / 100
+			PBIF [6] = Local1 * 10 / 100
+			// Granularity is 1% of design capacity
+			PBIF [7] = Local0 / 100
+			PBIF [8] = Local0 / 100
+			PBIF [9] = "BAT"
+			PBIF [10] = "0001"
+			PBIF [11] = "LION"
+		}
+		Else {
+			IVBI ()
+		}
+	}
+
+	Method (_BIF, 0, NotSerialized)  // _BIF: Battery Information
+	{
+		UPBI ()
+		Return (PBIF)
+	}
+
+	Name (PBST, Package (0x04)	// Persistent battery state
+	{
+		Zero, // 0 - Battery state
+		0xFFFFFFFF, // 1 - Battery present rate
+		0xFFFFFFFF, // 2 - Battery remaining capacity
+		0xFFFFFFFF // 3 - Battery present voltage
+	})
+
+	Method (IVBS, 0, NotSerialized)	// Invalid battery state
+	{
+		PBST [0] = Zero
+		PBST [1] = 0xFFFFFFFF
+		PBST [2] = 0xFFFFFFFF
+		PBST [3] = 0xFFFFFFFF
+	}
+
+	Method (UPBS, 0, Serialized)
+	{
+		If (BTOK ()) {
+			// Status flags - 3 bits; this EC does not report the
+			// charge limiting state
+			PBST [0] = ^^BTST
+			// Present rate
+			PBST [1] = ^^BTCR
+			// Remaining capacity
+			PBST [2] = ^^BTRC
+			// Present voltage
+			PBST [3] = ^^BTVT
+		}
+		Else {
+			IVBS ()
+		}
+	}
+
+	Method (_BST, 0, NotSerialized)  // _BST: Battery Status
+	{
+		UPBS ()
+		Return (PBST)
+	}
+}
diff --git a/src/mainboard/purism/librem_jsl/acpi/button.asl b/src/mainboard/purism/librem_jsl/acpi/button.asl
new file mode 100644
index 0000000000..4e70b2c762
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/button.asl
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Device (PWRB)
+{
+	Name (_HID, EisaId ("PNP0C0C"))
+	Name (_PRW, Package () { EC_GPE_SWI, 3 })
+}
diff --git a/src/mainboard/purism/librem_jsl/acpi/ec.asl b/src/mainboard/purism/librem_jsl/acpi/ec.asl
new file mode 100644
index 0000000000..dfdcc4290d
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/ec.asl
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Device (EC0)
+{
+	Name (_HID, EisaId ("PNP0C09"))
+	Name (_UID, 0)
+	Name (_GPE, EC_GPE_SWI)
+
+	Name (ECOK, Zero)
+
+	Name (_CRS, ResourceTemplate () {
+		IO (Decode16, 0x62, 0x62, 0, 1)
+		IO (Decode16, 0x66, 0x66, 0, 1)
+	})
+
+	Method (_STA, 0, NotSerialized)  // _STA: Status
+	{
+		Return (0x0F)
+	}
+
+	OperationRegion (ERAM, EmbeddedControl, Zero, 0xFF)
+	Field (ERAM, ByteAcc, Lock, Preserve)
+	{
+		Offset (0x7F),
+		LSTE, 1,	/* lid state */
+		, 7,
+		ACEX, 1,	/* AC adapter present */
+		BTEX, 1,	/* battery present */
+		, 6,
+		Offset (0x84),
+		BTDC, 16,	/* battery design capacity - mAh */
+		BTFV, 16,	/* battery last full voltage - mV */
+		BTFC, 16,	/* battery last full capacity - mAh */
+		Offset (0x8C),
+		BTST, 3,	/* battery state */
+		, 5,
+		BTCR, 16,	/* battery present current - mA */
+		BTRC, 16,	/* battery remaining capacity - mAh */
+		BTVT, 16,	/* battery present voltage - mV */
+		Offset (0xA3),
+		DSPO, 8,	/* Display off - write 1 to power off display */
+		BCST, 8,	/* battery charge start threshold - % */
+		BCET, 8,	/* battery charge end threshold - % */
+	}
+
+	#include "button.asl"
+	#include "ac.asl"
+	#include "battery.asl"
+	#include "vbtn.asl"
+
+	Method (PTS, 1, Serialized) {
+		Printf ("EC: PTS: %o", ToHexString(Arg0))
+		If (ECOK) {
+			// Power off display
+			DSPO = One
+		}
+	}
+
+	Method (WAK, 1, Serialized) {
+		Printf ("EC: WAK: %o", ToHexString(Arg0))
+		If (ECOK) {
+			DSPO = Zero
+			^AC.ACEX = ACEX
+			Notify(BAT0, Zero)
+			Notify(AC, Zero)
+		}
+	}
+
+	Method (_Q54, 0, NotSerialized) // Power button press
+	{
+		Printf ("EC: _Q54: power button press")
+		Notify (PWRB, 0x80)
+	}
+
+	Method (_Q0A, 0, NotSerialized) // Charger plugged or unplugged
+	{
+		Printf ("EC: _Q0A: charger state changed")
+		If (ECOK) {
+			^AC.ACEX = ACEX
+		}
+		Notify(BAT0, 0x81)	// Information change
+		Notify(AC, 0x80)	// Status change
+	}
+
+	Method (_Q0B, 0, NotSerialized) // Battery status change
+	{
+		Printf ("EC: _Q0B: battery state changed")
+		Notify(BAT0, 0x81)	// Information change
+		Notify(BAT0, 0x80)	// Status change
+	}
+
+	/* There is a lid/cover sensor, but it is not reliable with a soft cover. */
+	Method (_Q0C, 0, NotSerialized) // Cover closed
+	{
+		Printf ("EC: _Q0C: cover closed")
+	}
+
+	Method (_Q0D, 0, NotSerialized) // Cover opened
+	{
+		Printf ("EC: _Q0D: cover opened")
+	}
+
+	Method (_REG, 2, Serialized)  // _REG: Region Availability
+	{
+		Printf ("EC: _REG: %o, %o", Arg0, Arg1)
+		If ((Arg0 == 0x03) && (Arg1 == One)) {
+			// EC is now available
+			ECOK = One
+
+			// Set current AC and battery state
+			^AC.ACEX = ACEX
+			^BAT0.BTEX = BTEX
+
+			// Notify of changes
+			Notify(AC, Zero)
+			Notify(BAT0, Zero)
+
+			Printf ("EC is ready; BTEX=%o, ACEX=%o", BTEX, ACEX)
+		}
+	}
+}
diff --git a/src/mainboard/purism/librem_jsl/acpi/gpe.asl b/src/mainboard/purism/librem_jsl/acpi/gpe.asl
new file mode 100644
index 0000000000..bc8359dc52
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/gpe.asl
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Scope (_GPE)
+{
+	/*
+	 * Keyboard dock connector sense.  This is GPP_D4, which would seem to
+	 * be _L34 for GPE0_DW1, but there is an additional 10h offset for some
+	 * reason, even if GPP_D is assigned to DW0 or DW2 instead.
+	 */
+	Method (_L44, 0, NotSerialized) {
+		Printf ("GPE _L44");
+		\_SB.PCI0.LPCB.EC0.VBTN.NTFY ()
+	}
+}
diff --git a/src/mainboard/purism/librem_jsl/acpi/mainboard.asl b/src/mainboard/purism/librem_jsl/acpi/mainboard.asl
new file mode 100644
index 0000000000..819d30ae44
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/mainboard.asl
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#define EC_GPE_SWI	0x6E	/* eSPI SCI */
+
+Scope (\_SB.PCI0.LPCB)
+{
+	#include "ec.asl"
+}
diff --git a/src/mainboard/purism/librem_jsl/acpi/vbtn.asl b/src/mainboard/purism/librem_jsl/acpi/vbtn.asl
new file mode 100644
index 0000000000..3cca8a3502
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/acpi/vbtn.asl
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+Name (FLAP, 0x40) /* Flag indicating device is in laptop mode */
+
+/* Virtual events */
+Name (VTBL, 0xcc) /* Tablet Mode */
+Name (VLAP, 0xcd) /* Laptop Mode */
+
+Device (VBTN)
+{
+	Name (_HID, "INT33D6")
+	Name (_UID, 1)
+	Name (_DDN, "Intel Virtual Button Driver")
+
+	/*
+	 * This method is called at driver probe time and must exist or
+	 * the driver will not load.
+	 */
+	Method (VBDL)
+	{
+	}
+
+	/*
+	 * This method returns flags indicating tablet and dock modes.
+	 * It is called at driver probe time so the OS knows what the
+	 * state of the device is at boot.
+	 */
+	Method (VGBS)
+	{
+		Local0 = 0
+		If (CKLP ()) {
+			Local0 |= ^^FLAP
+		}
+		Return (Local0)
+	}
+
+	Method (_STA, 0)
+	{
+		Return (0xF)
+	}
+
+	Method (CKLP, 0)
+	{
+		/* 120 = GPP_D4 */
+		If (\_SB.PCI0.GRXS (120)) {
+			Printf ("VBTN: tablet mode")
+			Return (0)	/* Tablet mode */
+		} Else {
+			Printf ("VBTN: laptop mode")
+			Return (1)	/* Laptop mode */
+		}
+	}
+
+	Method (NTFY, 0)
+	{
+		/* Notify the new state */
+		If (CKLP ()) {
+			Notify (^^VBTN, ^^VLAP)
+		} Else {
+			Notify (^^VBTN, ^^VTBL)
+		}
+	}
+}
diff --git a/src/mainboard/purism/librem_jsl/board_info.txt b/src/mainboard/purism/librem_jsl/board_info.txt
new file mode 100644
index 0000000000..23538bdb15
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/board_info.txt
@@ -0,0 +1,8 @@
+Vendor name: Purism
+Board name: Librem Jasper Lake baseboard
+Category: misc
+Release year: 2023
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/purism/librem_jsl/bootblock.c b/src/mainboard/purism/librem_jsl/bootblock.c
new file mode 100644
index 0000000000..c629a6dec4
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/bootblock.c
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootblock_common.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/pci_ops.h>
+#include <ec/acpi/ec.h>
+#include <gpio.h>
+#include <soc/pci_devs.h>
+
+static const struct pad_config early_gpio_table[] = {
+	PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),	/* UART2_RXD */
+	PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),	/* UART2_TXD */
+};
+
+void bootblock_mainboard_early_init(void)
+{
+	gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table));
+}
+
+void bootblock_mainboard_init(void)
+{
+	/*
+	 * Ensure the panel is powered on.  ACPI _PTS disables it, if the system
+	 * is powered up again we need to turn it on.
+	 */
+	ec_write(0xa3, 0);
+}
diff --git a/src/mainboard/purism/librem_jsl/data.vbt b/src/mainboard/purism/librem_jsl/data.vbt
new file mode 100644
index 0000000000..e9143ea04e
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/data.vbt
diff --git a/src/mainboard/purism/librem_jsl/devicetree.cb b/src/mainboard/purism/librem_jsl/devicetree.cb
new file mode 100644
index 0000000000..e3b3be2022
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/devicetree.cb
@@ -0,0 +1,184 @@
+chip soc/intel/jasperlake
+
+	register "eist_enable" = "1"
+	register "s0ix_enable" = "0"
+
+	register "SaGv" = "SaGv_Enabled"
+
+	register "AcousticNoiseMitigation" = "1"
+
+	register "FastPkgCRampDisable" = "1"
+
+	register "SlowSlewRate" = "3"
+
+	# TCC limit of 60 C (passively cooled tablet)
+	register "tcc_offset" = "40"
+
+	register "power_limits_config[JSL_N5100_6W_CORE]" = "{
+		.tdp_pl1_override = 5,
+		.tdp_pl2_override = 12,
+	}"
+
+	register "pmc_gpe0_dw0" = "PMC_GPP_F"
+	register "pmc_gpe0_dw1" = "PMC_GPP_D"
+	register "pmc_gpe0_dw2" = "PMC_GPD"
+
+	register "SkipCpuReplacementCheck" = "1"
+
+	device cpu_cluster 0 on end
+
+	register "SerialIoI2cMode" = "{
+		[PchSerialIoIndexI2C0]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C1]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
+		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C5]  = PchSerialIoDisabled,
+	}"
+
+	register "SerialIoUartMode[2]" = "PchSerialIoSkipInit"
+
+	# Audio related configurations
+	register "PchHdaDspEnable" = "1"
+	register "PchHdaAudioLinkHdaEnable" = "1"
+
+	device domain 0 on
+		device pci 00.0 on  end	# Host Bridge
+		device pci 02.0 on  end	# Integrated Graphics Device
+		device pci 04.0 on  end # SA Thermal device
+		device pci 05.0 on  end	# IPU
+		device pci 09.0 off end	# Intel Trace Hub
+		device pci 12.6 off end	# GSPI 2
+		device pci 14.0 on	# USB xHCI
+			register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint reader
+			register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # microSD
+			register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Type-C 1
+			register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-C 2
+			register "usb2_ports[4]" = "USB2_PORT_EMPTY"
+			register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Internal hub - front and rear cameras
+			register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Dock pogo pins
+			register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # WLAN module
+			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# Type-C Port 2
+			register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# Type-C Port 1
+
+			chip drivers/usb/acpi
+				register "desc" = ""Root Hub""
+				register "type" = "UPC_TYPE_HUB"
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Fingerprint Reader""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""microSD Card Reader""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-C Port 1""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(0, 0)"
+						device usb 2.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-C Port 2""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(0, 1)"
+						device usb 2.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Cameras""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Keyboard Dock""
+						register "type" = "UPC_TYPE_PROPRIETARY"
+						device usb 2.6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-C Port 2""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(0, 1)"
+						device usb 3.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-C Port 1""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(0, 0)"
+						device usb 3.1 on end
+					end
+				end
+			end
+		end
+		device pci 14.1 off end	# USB xDCI (OTG)
+		device pci 14.2 on  end	# PMC SRAM
+		device pci 14.3 on	# CNVi wifi
+			chip drivers/wifi/generic
+				device generic 0 on end
+			end
+		end
+		device pci 14.5 off end	# SD card
+		device pci 15.0 off end	# I2C 0
+		device pci 15.1 off end	# I2C 1
+		device pci 15.2 on	# I2C 2
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GXTP7380""
+				register "generic.cid" = ""PNP0C50""
+				register "generic.desc" = ""Touchscreen""
+				register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_C12)"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D6)"
+				register "hid_desc_reg_offset" = "1"
+				device i2c 5d on end
+			end
+		end
+		device pci 15.3 on	# I2C 3
+			chip drivers/i2c/generic
+				register "hid" = ""MXC6655""
+				register "cid" = ""MXC6655""
+				register "desc" = ""Accelerometer""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E1)"
+				device i2c 15 on end
+			end
+		end
+		device pci 16.0 off end	# HECI 1
+		device pci 16.1 off end	# HECI 2
+		device pci 16.4 off end	# HECI 3
+		device pci 16.5 off end	# HECI 4
+		device pci 17.0 off end	# SATA
+		device pci 19.0 on  end	# I2C 4
+		device pci 19.1 off end	# I2C 5
+		device pci 19.2 off end	# UART 2
+		device pci 1a.0 off end	# eMMC
+		device pci 1c.0 off end	# PCI Express Root Port 1
+		device pci 1c.1 off end	# PCI Express Root Port 2
+		device pci 1c.2 on	# PCI Express Root Port 3 - M.2 M-key, PCIe only
+			register "PcieRpEnable[2]" = "true"
+			register "PcieClkSrcUsage[0]" = "2"
+			register "PcieClkSrcClkReq[0]" = "0"
+			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth2X"
+		end
+		device pci 1c.3 off end	# PCI Express Root Port 4
+		device pci 1c.4 off end	# PCI Express Root Port 5
+		device pci 1c.5 off end	# PCI Express Root Port 6
+		device pci 1c.6 off end	# PCI Express Root Port 7
+		device pci 1c.7 off end	# PCI Express Root Port 8
+		device pci 1e.0 off end	# UART 0
+		device pci 1e.1 off end	# UART 1
+		device pci 1e.2 off end	# GSPI 0
+		device pci 1e.3 off end	# GSPI 1
+		device pci 1f.0 on  end	# eSPI Interface
+		device pci 1f.1 off end	# P2SB
+		device pci 1f.2 hidden end	# Power Management Controller
+		device pci 1f.3 on  end	# Intel HDA/cAVS
+		device pci 1f.4 off end	# SMBus
+		device pci 1f.5 on  end	# PCH SPI
+		device pci 1f.7 off end	# Intel Trace Hub
+	end
+end
diff --git a/src/mainboard/purism/librem_jsl/dsdt.asl b/src/mainboard/purism/librem_jsl/dsdt.asl
new file mode 100644
index 0000000000..713098b7f1
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/dsdt.asl
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+DefinitionBlock(
+	"dsdt.aml",
+	"DSDT",
+	ACPI_DSDT_REV_2,
+	OEM_ID,
+	ACPI_TABLE_CREATOR,
+	0x20110725
+)
+{
+	#include <acpi/dsdt_top.asl>
+	#include <soc/intel/common/block/acpi/acpi/platform.asl>
+	#include <soc/intel/common/block/acpi/acpi/globalnvs.asl>
+	#include <cpu/intel/common/acpi/cpu.asl>
+
+	Device (\_SB.PCI0)
+	{
+		#include <soc/intel/common/block/acpi/acpi/northbridge.asl>
+		#include <soc/intel/jasperlake/acpi/southbridge.asl>
+		// The volume keys are implemented by the EC as a PS/2 keyboard
+		#include <drivers/pc80/pc/ps2_keyboard.asl>
+	}
+
+	#include "acpi/mainboard.asl"
+	#include "acpi/gpe.asl"
+
+	#include <southbridge/intel/common/acpi/sleepstates.asl>
+}
diff --git a/src/mainboard/purism/librem_jsl/gpio.h b/src/mainboard/purism/librem_jsl/gpio.h
new file mode 100644
index 0000000000..79148ea876
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/gpio.h
@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef CFG_GPIO_H
+#define CFG_GPIO_H
+
+#include <gpio.h>
+
+static const struct pad_config gpio_table[] = {
+
+	/* ------- GPIO Community 1 ------- */
+
+	/* ------- GPIO Group GPP_G ------- */
+	PAD_NC(GPP_G0, NONE),	/* GPIO */
+	PAD_NC(GPP_G1, NONE),	/* GPIO */
+	PAD_NC(GPP_G2, NONE),	/* GPIO */
+	PAD_NC(GPP_G3, NONE),	/* GPIO */
+	PAD_NC(GPP_G4, NONE),	/* GPIO */
+	PAD_NC(GPP_G5, NONE),	/* GPIO */
+	PAD_NC(GPP_G6, NONE),	/* GPIO */
+	PAD_NC(GPP_G7, NONE),	/* GPIO */
+
+	/* ------- GPIO Community 2 ------- */
+
+	/* ------- GPIO Group HVMOS ------- */
+
+	/* ------- GPIO Group GPP_E ------- */
+	PAD_NC(GPP_E0, NONE),	/* GPIO */
+	/* GPP_E1 - ACCL_1_INT_N */
+	PAD_CFG_GPI_TRIG_OWN(GPP_E1, NONE, PLTRST, OFF, DRIVER),	/* GPIO */
+	PAD_NC(GPP_E2, NONE),	/* GPIO */
+	PAD_NC(GPP_E3, NONE),	/* GPIO */
+	PAD_NC(GPP_E4, NONE),	/* GPIO */
+	PAD_NC(GPP_E5, NONE),	/* GPIO */
+	PAD_NC(GPP_E6, NONE),	/* GPIO */
+	PAD_NC(GPP_E7, NONE),	/* GPIO */
+	/* GPP_E8 - UART_BT_WAKE_N */
+	//PAD_CFG_GPI_SCI(GPP_E8, NONE, DEEP, LEVEL, INVERT),	/* GPIO */
+	PAD_NC(GPP_E8, NONE),
+	PAD_NC(GPP_E9, NONE),	/* GPIO */
+	PAD_NC(GPP_E10, NONE),	/* GPIO */
+	PAD_NC(GPP_E11, NONE),	/* GPIO */
+	PAD_NC(GPP_E12, NONE),	/* GPIO */
+	PAD_NC(GPP_E13, NONE),	/* GPIO */
+	PAD_NC(GPP_E14, NONE),	/* GPIO */
+	PAD_NC(GPP_E15, NONE),	/* GPIO */
+	PAD_NC(GPP_E16, NONE),	/* GPIO */
+	PAD_NC(GPP_E17, NONE),	/* GPIO */
+	PAD_NC(GPP_E18, NONE),	/* GPIO */
+	PAD_NC(GPP_E19, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1),	/* CNV_BRI_DT */
+	PAD_CFG_NF(GPP_E21, UP_20K, DEEP, NF1),	/* CNV_BRI_RSP */
+	PAD_CFG_NF(GPP_E22, NONE, DEEP, NF1),	/* CNV_RGI_DT */
+	PAD_CFG_NF(GPP_E23, UP_20K, DEEP, NF1),	/* CNV_RGI_RSP */
+
+	/* ------- GPIO Community 4 ------- */
+
+	/* ------- GPIO Group GPD ------- */
+	PAD_CFG_NF(GPD0, NONE, RSMRST, NF1),	/* GPIO_BATLOWB */
+	PAD_CFG_NF(GPD1, NATIVE, RSMRST, NF1),	/* GPIO_ACPRESENT */
+	/* GPD2 - SMC_WAKE_SCI_N */
+	PAD_CFG_GPI_SCI(GPD2, NONE, DEEP, LEVEL, INVERT),	/* GPIO */
+	PAD_CFG_NF(GPD3, UP_20K, RSMRST, NF1),	/* GPIO_PWRBTNB */
+	PAD_CFG_NF(GPD4, NONE, RSMRST, NF1),	/* GPIO_SLP_S3B */
+	PAD_CFG_NF(GPD5, NONE, RSMRST, NF1),	/* GPIO_SLP_S4B */
+	PAD_CFG_NF(GPD6, NONE, DEEP, NF1),	/* GPIO_SLP_AB */
+	PAD_NC(GPD7, NONE),	/* GPIO */
+	PAD_CFG_NF(GPD8, NONE, RSMRST, NF1),	/* GPIO_SUSCLK */
+	PAD_CFG_NF(GPD9, NONE, DEEP, NF1),	/* GPIO_SLP_WLANB */
+	PAD_CFG_NF(GPD10, NONE, DEEP, NF1),	/* GPIO_SLP_S5B */
+
+	/* ------- GPIO Community 5 ------- */
+
+	/* ------- GPIO Group GPP_H ------- */
+	/* GPP_H0 - FPS_INT_N */
+	PAD_CFG_GPI_APIC(GPP_H0, NONE, PLTRST, LEVEL, INVERT),	/* GPIO */
+	PAD_NC(GPP_H1, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_H2, NONE, DEEP, NF3),	/* MODEM_CLKREQ */
+	PAD_NC(GPP_H3, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),	/* I2C2_SDA */
+	PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),	/* I2C2_SCL */
+	PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),	/* I2C3_SDA */
+	PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),	/* I2C3_SCL */
+	PAD_NC(GPP_H8, NONE),	/* GPIO */
+	PAD_NC(GPP_H9, NONE),	/* GPIO */
+	PAD_NC(GPP_H10, NONE),	/* GPIO */
+	PAD_NC(GPP_H11, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_H12, NONE, DEEP, NF2),	/* CNV_RF_RESETB */
+	PAD_NC(GPP_H13, NONE),	/* GPIO */
+	PAD_NC(GPP_H14, NONE),	/* GPIO */
+	PAD_NC(GPP_H15, NONE),	/* GPIO */
+	/* GPP_H16 - FPS_RST_N */
+	PAD_CFG_GPO(GPP_H16, 1, PLTRST),	/* GPIO */
+	PAD_NC(GPP_H17, NONE),	/* GPIO */
+	PAD_NC(GPP_H18, NONE),	/* GPIO */
+	PAD_NC(GPP_H19, NONE),	/* GPIO */
+	PAD_NC(GPP_H20, NONE),	/* GPIO */
+	PAD_NC(GPP_H21, NONE),	/* GPIO */
+	PAD_NC(GPP_H22, NONE),	/* GPIO */
+	PAD_NC(GPP_H23, NONE),	/* GPIO */
+
+	/* ------- GPIO Group GPP_D ------- */
+	PAD_NC(GPP_D0, NONE),	/* GPIO */
+	PAD_NC(GPP_D1, NONE),	/* GPIO */
+	/* GPP_D2 - EC_SMI_N */
+	PAD_CFG_GPI_SMI(GPP_D2, NONE, PLTRST, LEVEL, INVERT),	/* GPIO */
+	PAD_NC(GPP_D3, NONE),	/* GPIO */
+	/* GPP_D4 - GPIO_DK (keyboard dock sense) */
+	PAD_CFG_GPI_SCI(GPP_D4, NONE, DEEP, EDGE_BOTH, NONE),	/* GPIO */
+	/* GPP_D5 - SSD_RST_N (NVMe PERESET#) */
+	PAD_CFG_GPO(GPP_D5, 1, PLTRST),	/* GPIO */
+	/* GPP_D6 - TCH_PNL_RST_N */
+	PAD_CFG_GPO(GPP_D6, 1, PLTRST),	/* GPIO */
+	PAD_NC(GPP_D7, NONE),	/* GPIO */
+	PAD_NC(GPP_D8, NONE),	/* GPIO */
+	PAD_NC(GPP_D9, NONE),	/* GPIO */
+	PAD_NC(GPP_D10, NONE),	/* GPIO */
+	PAD_NC(GPP_D11, NONE),	/* GPIO */
+	PAD_NC(GPP_D12, NONE),	/* GPIO */
+	PAD_NC(GPP_D13, NONE),	/* GPIO */
+	PAD_NC(GPP_D14, NONE),	/* GPIO */
+	PAD_NC(GPP_D15, NONE),	/* GPIO */
+	PAD_NC(GPP_D16, NONE),	/* GPIO */
+	PAD_NC(GPP_D17, NONE),	/* GPIO */
+	PAD_NC(GPP_D18, NONE),	/* GPIO */
+	PAD_NC(GPP_D19, NONE),	/* GPIO */
+	PAD_NC(GPP_D20, NONE),	/* GPIO */
+	PAD_NC(GPP_D21, NONE),	/* GPIO */
+	PAD_NC(GPP_D22, NONE),	/* GPIO */
+	PAD_NC(GPP_D23, NONE),	/* GPIO */
+
+	/* ------- GPIO Group VGPIO5 ------- */
+	PAD_NC(VGPIO_0, NONE),	/* GPIO */
+	PAD_NC(VGPIO_3, NONE),	/* GPIO */
+	PAD_NC(VGPIO_4, NONE),	/* GPIO */
+	PAD_NC(VGPIO_5, NONE),	/* GPIO */
+	PAD_NC(VGPIO_6, NONE),	/* GPIO */
+	PAD_NC(VGPIO_7, NONE),	/* GPIO */
+	PAD_NC(VGPIO_8, NONE),	/* GPIO */
+	PAD_NC(VGPIO_9, NONE),	/* GPIO */
+	PAD_NC(VGPIO_10, NONE),	/* GPIO */
+	PAD_NC(VGPIO_11, NONE),	/* GPIO */
+	PAD_NC(VGPIO_12, NONE),	/* GPIO */
+	PAD_NC(VGPIO_13, NONE),	/* GPIO */
+	PAD_NC(VGPIO_18, NONE),	/* GPIO */
+	PAD_NC(VGPIO_19, NONE),	/* GPIO */
+	PAD_NC(VGPIO_20, NONE),	/* GPIO */
+	PAD_NC(VGPIO_21, NONE),	/* GPIO */
+	PAD_NC(VGPIO_22, NONE),	/* GPIO */
+	PAD_NC(VGPIO_23, NONE),	/* GPIO */
+	PAD_NC(VGPIO_24, NONE),	/* GPIO */
+	PAD_NC(VGPIO_25, NONE),	/* GPIO */
+	PAD_NC(VGPIO_30, NONE),	/* GPIO */
+	PAD_NC(VGPIO_31, NONE),	/* GPIO */
+	PAD_NC(VGPIO_32, NONE),	/* GPIO */
+	PAD_NC(VGPIO_33, NONE),	/* GPIO */
+	PAD_NC(VGPIO_34, NONE),	/* GPIO */
+	PAD_NC(VGPIO_35, NONE),	/* GPIO */
+	PAD_NC(VGPIO_36, NONE),	/* GPIO */
+	PAD_NC(VGPIO_37, NONE),	/* GPIO */
+	PAD_NC(VGPIO_39, NONE),	/* GPIO */
+
+	/* ------- GPIO Group GPP_C ------- */
+	PAD_NC(GPP_C0, NONE),	/* GPIO */
+	PAD_NC(GPP_C1, NONE),	/* GPIO */
+	PAD_NC(GPP_C2, NONE),	/* GPIO */
+	PAD_NC(GPP_C3, NONE),	/* GPIO */
+	PAD_NC(GPP_C4, NONE),	/* GPIO */
+	PAD_NC(GPP_C5, NONE),	/* GPIO */
+	PAD_NC(GPP_C6, NONE),	/* GPIO */
+	PAD_NC(GPP_C7, NONE),	/* GPIO */
+	PAD_CFG_GPO(GPP_C8, 1, PLTRST),	/* GPIO */
+	PAD_NC(GPP_C9, NONE),	/* GPIO */
+	PAD_NC(GPP_C10, NONE),	/* GPIO */
+	PAD_NC(GPP_C11, NONE),	/* GPIO */
+	/* GPP_C12 - TCH_PNL_INT_N */
+	PAD_CFG_GPI_TRIG_OWN(GPP_C12, NONE, PLTRST, EDGE_SINGLE, DRIVER),	/* GPIO */
+	PAD_NC(GPP_C13, NONE),	/* GPIO */
+	PAD_NC(GPP_C14, NONE),	/* GPIO */
+	PAD_NC(GPP_C15, NONE),	/* GPIO */
+	PAD_NC(GPP_C16, NONE),	/* GPIO */
+	PAD_NC(GPP_C17, NONE),	/* GPIO */
+	PAD_NC(GPP_C18, NONE),	/* GPIO */
+	PAD_NC(GPP_C19, NONE),	/* GPIO */
+	/* GPP_C20, GPP_C21 configured in bootblock for UART2 */
+	PAD_NC(GPP_C22, NONE),	/* GPIO */
+	PAD_NC(GPP_C23, NONE),	/* GPIO */
+
+	/* ------- GPIO Community 6 ------- */
+
+	/* ------- GPIO Group GPP_F ------- */
+	PAD_NC(GPP_F0, NONE),	/* GPIO */
+	PAD_NC(GPP_F1, NONE),	/* GPIO */
+	PAD_NC(GPP_F2, NONE),	/* GPIO */
+	PAD_NC(GPP_F3, NONE),	/* GPIO */
+	PAD_NC(GPP_F4, NONE),	/* GPIO */
+	PAD_NC(GPP_F5, NONE),	/* GPIO */
+	PAD_NC(GPP_F6, NONE),	/* GPIO */
+	PAD_NC(GPP_F7, NONE),	/* GPIO */
+	PAD_NC(GPP_F8, NONE),	/* GPIO */
+	PAD_NC(GPP_F9, NONE),	/* GPIO */
+	PAD_NC(GPP_F10, NONE),	/* GPIO */
+	PAD_NC(GPP_F11, NONE),	/* GPIO */
+	PAD_NC(GPP_F12, NONE),	/* GPIO */
+	PAD_NC(GPP_F13, NONE),	/* GPIO */
+	PAD_NC(GPP_F14, NONE),	/* GPIO */
+	PAD_NC(GPP_F15, NONE),	/* GPIO */
+	PAD_NC(GPP_F16, NONE),	/* GPIO */
+	PAD_NC(GPP_F17, NONE),	/* GPIO */
+	PAD_NC(GPP_F18, NONE),	/* GPIO */
+	PAD_NC(GPP_F19, NONE),	/* GPIO */
+
+	/* ------- GPIO Group GPP_SPI ------- */
+
+	/* ------- GPIO Group GPP_B ------- */
+	PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1),	/* GPIO_CORE_VID0 */
+	PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1),	/* GPIO_CORE_VID1 */
+	PAD_NC(GPP_B2, NONE),	/* GPIO */
+	PAD_NC(GPP_B3, NONE),	/* GPIO */
+	PAD_NC(GPP_B4, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),	/* PCIE_CLKREQ0B */
+	PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1),	/* PCIE_CLKREQ1B */
+	PAD_NC(GPP_B7, NONE),	/* GPIO */
+	PAD_NC(GPP_B8, NONE),	/* GPIO */
+	PAD_NC(GPP_B9, NONE),	/* GPIO */
+	PAD_NC(GPP_B10, NONE),	/* GPIO */
+	PAD_NC(GPP_B11, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),	/* GPIO_SLP_S0B */
+	PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),	/* GPIO_PLTRSTB */
+	PAD_NC(GPP_B14, NONE),	/* GPIO */
+	PAD_NC(GPP_B15, NONE),	/* GPIO */
+	PAD_NC(GPP_B16, NONE),	/* GPIO */
+	/* GPP_B17 - PCIE_WLAN_RST_N_R */
+	PAD_CFG_GPO(GPP_B17, 1, PLTRST),	/* GPIO */
+	PAD_NC(GPP_B18, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),	/* GSPI1_CS0B */
+	PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1),	/* GSPI1_CLK */
+	PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1),	/* GSPI1_MISO */
+	PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1),	/* GSPI1_MOSI */
+	PAD_CFG_NF(GPP_B23, NONE, DEEP, NF1),	/* DDI2_HPD */
+
+	/* ------- GPIO Group GPP_A ------- */
+	PAD_CFG_NF(GPP_A0, UP_20K, DEEP, NF1),	/* ESPI_IO_0 */
+	PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1),	/* ESPI_IO_1 */
+	PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1),	/* ESPI_IO_2 */
+	PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1),	/* ESPI_IO_3 */
+	PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1),	/* ESPI_CSB */
+	PAD_CFG_NF(GPP_A5, DN_20K, DEEP, NF1),	/* ESPI_CLK */
+	PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),	/* ESPI_RESETB */
+	PAD_NC(GPP_A7, NONE),	/* GPIO */
+	PAD_NC(GPP_A8, NONE),	/* GPIO */
+	PAD_NC(GPP_A9, NONE),	/* GPIO */
+	PAD_NC(GPP_A10, NONE),	/* GPIO */
+	PAD_NC(GPP_A11, NONE),	/* GPIO */
+	PAD_NC(GPP_A12, NONE),	/* GPIO */
+	PAD_NC(GPP_A13, NONE),	/* GPIO */
+	PAD_NC(GPP_A14, NONE),	/* GPIO */
+	PAD_NC(GPP_A15, NONE),	/* GPIO */
+	PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),	/* DDI1_HPD */
+	PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1),	/* DDI0_HPD */
+	PAD_NC(GPP_A18, NONE),	/* GPIO */
+	/* GPP_A19 - WWAN_DISABLE_3P3_N (actually for WLAN despite name) */
+	PAD_CFG_GPO(GPP_A19, 1, PLTRST),	/* GPIO */
+
+	/* ------- GPIO Group GPP_S ------- */
+	PAD_NC(GPP_S0, NONE),	/* GPIO */
+	PAD_NC(GPP_S1, NONE),	/* GPIO */
+	PAD_NC(GPP_S2, NONE),	/* GPIO */
+	PAD_NC(GPP_S3, NONE),	/* GPIO */
+	PAD_NC(GPP_S4, NONE),	/* GPIO */
+	PAD_NC(GPP_S5, NONE),	/* GPIO */
+	PAD_NC(GPP_S6, NONE),	/* GPIO */
+	PAD_NC(GPP_S7, NONE),	/* GPIO */
+
+	/* ------- GPIO Group GPP_R ------- */
+	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF1),	/* HDA_BCLK */
+	PAD_CFG_NF(GPP_R1, NATIVE, DEEP, NF1),	/* HDA_SYNC */
+	PAD_CFG_NF(GPP_R2, NATIVE, DEEP, NF1),	/* HDA_SD0 */
+	PAD_CFG_NF(GPP_R3, NATIVE, DEEP, NF1),	/* HDA_SDI0 */
+	PAD_CFG_NF(GPP_R4, NONE, DEEP, NF1),	/* HDA_RSTB */
+	PAD_NC(GPP_R5, NONE),	/* GPIO */
+	PAD_NC(GPP_R6, NONE),	/* GPIO */
+	PAD_NC(GPP_R7, NONE),	/* GPIO */
+};
+
+#endif /* CFG_GPIO_H */
diff --git a/src/mainboard/purism/librem_jsl/hda_verb.c b/src/mainboard/purism/librem_jsl/hda_verb.c
new file mode 100644
index 0000000000..5014ec4b3e
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/hda_verb.c
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+	0x10ec0269,	/* Codec Vendor/Device ID: Realtek ALC269 */
+	0x10ec0269,	/* Subsystem ID */
+	16,		/* Number of entries */
+
+	AZALIA_RESET(0x1),
+
+	AZALIA_SUBVENDOR(0, 0x10ec0269),
+	AZALIA_PIN_CFG(0, 0x12, 0x90a60130), /* DMIC */
+	AZALIA_PIN_CFG(0, 0x14, 0x90170110), /* FRONT */
+	AZALIA_PIN_CFG(0, 0x17, 0x40000000), /* N/C */
+	AZALIA_PIN_CFG(0, 0x18, 0x04a11020), /* MIC1 */
+	AZALIA_PIN_CFG(0, 0x19, 0x411111f0), /* N/C */
+	AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), /* N/C */
+	AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), /* N/C */
+	AZALIA_PIN_CFG(0, 0x1d, 0x40e38105), /* BEEP */
+	AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), /* N/C */
+	AZALIA_PIN_CFG(0, 0x21, 0x0421101f), /* HP-OUT */
+
+	/* EQ */
+	0x02050011,
+	0x02040710,
+	0x02050012,
+	0x02041901,
+
+	0x0205000D,
+	0x02044440,
+	0x02050007,
+	0x02040040,
+
+	0x02050002,
+	0x0204AAB8,
+	0x02050008,
+	0x02040300,
+
+	0x02050017,
+	0x020400AF,
+	0x02050005,
+	0x020400C0,
+
+	0x8086281a,	/* Codec Vendor/Device ID: Intel Jasper Lake HDMI */
+	0x80860101,	/* Subsystem ID */
+	6,		/* Number of entries */
+
+	AZALIA_SUBVENDOR(2, 0x80860101),
+	AZALIA_PIN_CFG(2, 0x04, 0x18560010),
+	AZALIA_PIN_CFG(2, 0x06, 0x18560010),
+	AZALIA_PIN_CFG(2, 0x08, 0x18560010),
+	AZALIA_PIN_CFG(2, 0x0a, 0x18560010),
+	AZALIA_PIN_CFG(2, 0x0b, 0x18560010),
+};
+
+const u32 pc_beep_verbs[] = {};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/purism/librem_jsl/ramstage.c b/src/mainboard/purism/librem_jsl/ramstage.c
new file mode 100644
index 0000000000..b9dd5f2f4d
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/ramstage.c
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <soc/ramstage.h>
+#include <acpi/acpigen_ps2_keybd.h>
+#include "gpio.h"
+
+void mainboard_silicon_init_params(FSP_S_CONFIG *supd)
+{
+}
+
+static void mainboard_fill_ssdt(const struct device *dev)
+{
+	/*
+	 * Librem 11's PS/2 keyboard has only two keys - volume up and volume
+	 * down.
+	 */
+	enum ps2_action_key ps2_action_keys[2] = {
+		PS2_KEY_VOL_DOWN,
+		PS2_KEY_VOL_UP
+	};
+	acpigen_ps2_keyboard_dsd("_SB.PCI0.PS2K", ARRAY_SIZE(ps2_action_keys),
+		ps2_action_keys, false, false, false, false);
+}
+
+static void mainboard_init(void *chip_info)
+{
+	gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
+}
+
+static void mainboard_enable(struct device *dev)
+{
+	dev->ops->acpi_fill_ssdt = mainboard_fill_ssdt;
+}
+
+struct chip_operations mainboard_ops = {
+	.init = mainboard_init,
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/purism/librem_jsl/romstage.c b/src/mainboard/purism/librem_jsl/romstage.c
new file mode 100644
index 0000000000..65205ad915
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/romstage.c
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <gpio.h>
+#include <memory_info.h>
+#include <soc/meminit.h>
+#include <soc/romstage.h>
+#include <device/pci_ops.h>
+#include <console/console.h>
+
+static const struct mb_cfg board_mem_cfg = {
+	.dq_map[DDR_CH0] = {
+		{0x0f, 0xf0},
+		{0x0f, 0xf0},
+		{0xff, 0x00},
+		{0x00, 0x00},
+		{0x00, 0x00},
+		{0x00, 0x00}
+	},
+	.dq_map[DDR_CH1] = {
+		{0x0f, 0xf0},
+		{0x0f, 0xf0},
+		{0xff, 0x00},
+		{0x00, 0x00},
+		{0x00, 0x00},
+		{0x00, 0x00}
+	},
+
+	.dqs_map[DDR_CH0] = {0, 3, 2, 1, 5, 7, 4, 6},
+	.dqs_map[DDR_CH1] = {3, 1, 2, 0, 4, 7, 6, 5},
+
+	/* Enable Early Command Training */
+	.ect = 1,
+
+	/* User Board Type */
+	.UserBd = BOARD_TYPE_ULT_ULX,
+};
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+	const struct spd_info spd_info = {
+		.read_type = READ_SPD_CBFS,
+		.spd_spec.spd_index = 0,
+	};
+
+	memcfg_init(&memupd->FspmConfig, &board_mem_cfg, &spd_info, false);
+}
diff --git a/src/mainboard/purism/librem_jsl/spd/isocon8gb.spd.hex b/src/mainboard/purism/librem_jsl/spd/isocon8gb.spd.hex
new file mode 100644
index 0000000000..b9fd365dce
--- /dev/null
+++ b/src/mainboard/purism/librem_jsl/spd/isocon8gb.spd.hex
@@ -0,0 +1,32 @@
+23 11 11 0e 16 29 b8 08 00 40 00 00 02 62 00 00
+00 00 05 0f 92 54 01 00 8a 00 90 a8 90 c0 08 60
+04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 92 00 a7
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 20 00 00 00 4d 54 35 33 44 35 31
+32 4d 36 34 44 34 52 51 2d 30 34 36 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00