pcengines/apu2: add board support

Initial work based on db-ft3b-ls and code released by Eltan. Board
boots with some limitation.

Now the AGESA binary is harcoded and board specific until it's fixed
by the SoC vendor.

memtest86+ from external repo skips looking for SPD on SMBus, which when
performed cause memtest86+ to hang. Still didn't tried whole test suit.

SeaBIOS 1.9.3 have some problems with USB which lead to no booting in
some cases. Full log:
https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872

SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios)
works fine. Those changes are planned for upstream.

Information about obtaining and booting Voyage Linux:
https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder

Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/14138
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 95 insertions, 0 deletions

diff --git a/src/mainboard/pcengines/apu2/acpi/sleep.asl b/src/mainboard/pcengines/apu2/acpi/sleep.asl
new file mode 100644
index 0000000000..0734c8e3c8
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/sleep.asl
@@ -0,0 +1,95 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+*	Exit:
+*		-none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method.  This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver.  This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+
+External(\_SB.APTS, MethodObj)
+External(\_SB.AWAK, MethodObj)
+
+Method(_PTS, 1) {
+	/* DBGO("\\_PTS\n") */
+	/* DBGO("From S0 to S") */
+	/* DBGO(Arg0) */
+	/* DBGO("\n") */
+
+	/* Clear wake status structure. */
+	Store(0, Index(WKST,0))
+	Store(0, Index(WKST,1))
+	Store(7, UPWS)
+	\_SB.APTS(Arg0)
+} /* End Method(\_PTS) */
+
+/*
+*	\_BFS OEM Back From Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		-none-
+*/
+Method(\_BFS, 1) {
+	/* DBGO("\\_BFS\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+}
+
+/*
+*  \_WAK System Wake method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		Return package of 2 DWords
+*		Dword 1 - Status
+*			0x00000000	wake succeeded
+*			0x00000001	Wake was signaled but failed due to lack of power
+*			0x00000002	Wake was signaled but failed due to thermal condition
+*		Dword 2 - Power Supply state
+*			if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+	/* DBGO("\\_WAK\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+
+	/* clear USB wake up signal */
+	Store(1, USBS)
+
+	\_SB.AWAK(Arg0)
+
+	Return(WKST)
+} /* End Method(\_WAK) */