Remove all AMD K8 boards

Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.

Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

12 files changed, 0 insertions, 1334 deletions

diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig b/src/mainboard/nvidia/l1_2pvv/Kconfig
deleted file mode 100644
index b5e51c5ff0..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/Kconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-if BOARD_NVIDIA_L1_2PVV
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_AMD_SOCKET_F
-	select DIMM_DDR2
-	select DIMM_REGISTERED
-	select NORTHBRIDGE_AMD_AMDK8
-	select SOUTHBRIDGE_NVIDIA_MCP55
-	select HT_CHAIN_DISTRIBUTE
-	select MCP55_USE_NIC
-	select MCP55_USE_AZA
-	select SUPERIO_WINBOND_W83627EHG
-	select PARALLEL_CPU_INIT
-	select HAVE_OPTION_TABLE
-	select HAVE_PIRQ_TABLE
-	select HAVE_MP_TABLE
-	select LIFT_BSP_APIC_ID
-	select BOARD_ROMSIZE_KB_512
-	select QRANK_DIMM_SUPPORT
-	select K8_ALLOCATE_IO_RANGE
-
-config MAINBOARD_DIR
-	string
-	default nvidia/l1_2pvv
-
-config DCACHE_RAM_BASE
-	hex
-	default 0xc8000
-
-config DCACHE_RAM_SIZE
-	hex
-	default 0x08000
-
-config APIC_ID_OFFSET
-	hex
-	default 0x10
-
-config MEM_TRAIN_SEQ
-	int
-	default 1
-
-config MCP55_NUM
-	int
-	default 2
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "l1_2pvv"
-
-config MAX_CPUS
-	int
-	default 4
-
-config MAX_PHYSICAL_CPUS
-	int
-	default 2
-
-config HT_CHAIN_UNITID_BASE
-	hex
-	default 0x0
-
-config HT_CHAIN_END_UNITID_BASE
-	hex
-	default 0x20
-
-config IRQ_SLOT_COUNT
-	int
-	default 11
-
-config MCP55_PCI_E_X_0
-	int
-	default 2
-
-endif # BOARD_NVIDIA_L1_2PVV
diff --git a/src/mainboard/nvidia/l1_2pvv/Kconfig.name b/src/mainboard/nvidia/l1_2pvv/Kconfig.name
deleted file mode 100644
index 40dffc643f..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_NVIDIA_L1_2PVV
-	bool "l1_2pvv"
diff --git a/src/mainboard/nvidia/l1_2pvv/board_info.txt b/src/mainboard/nvidia/l1_2pvv/board_info.txt
deleted file mode 100644
index b351b8e696..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/board_info.txt
+++ /dev/null
@@ -1 +0,0 @@
-Category: eval
diff --git a/src/mainboard/nvidia/l1_2pvv/cmos.layout b/src/mainboard/nvidia/l1_2pvv/cmos.layout
deleted file mode 100644
index 9e6a9e56f2..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/cmos.layout
+++ /dev/null
@@ -1,69 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-
-entries
-
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-388          4       h       0        reboot_counter
-#392          3       r       0        unused
-395          1       e       1        hw_scrubber
-396          1       e       1        interleave_chip_selects
-397          2       e       8        max_mem_clock
-399          1       e       2        multi_core
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-440          4       e       9        slow_cpu
-444          1       e       1        nmi
-445          1       e       1        iommu
-456          1       e       1        ECC_memory
-728        256       h       0        user_data
-984         16       h       0        check_sum
-# Reserve the extended AMD configuration registers
-1000        24       r       0        amd_reserved
-
-
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-6     5     Notice
-6     6     Info
-6     7     Debug
-6     8     Spew
-8     0     200Mhz
-8     1     166Mhz
-8     2     133Mhz
-8     3     100Mhz
-9     0     off
-9     1     87.5%
-9     2     75.0%
-9     3     62.5%
-9     4     50.0%
-9     5     37.5%
-9     6     25.0%
-9     7     12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/nvidia/l1_2pvv/devicetree.cb b/src/mainboard/nvidia/l1_2pvv/devicetree.cb
deleted file mode 100644
index d713e3f7cc..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/devicetree.cb
+++ /dev/null
@@ -1,180 +0,0 @@
-chip northbridge/amd/amdk8/root_complex						# Root complex
-	device cpu_cluster 0 on							# (L)APIC cluster
-		chip cpu/amd/socket_F						# CPU socket
-			device lapic 0 on end					# Local APIC of the CPU
-		end
-	end
-	device domain 0 on					# PCI domain
-		subsystemid 0x1022 0x2b80 inherit
-		chip northbridge/amd/amdk8					# Northbridge / RAM controller
-			device pci 18.0 on					# Link 0 == LDT 0
-				chip southbridge/nvidia/mcp55			# Southbridge
-					device pci 0.0 on end			# HT
-					device pci 1.0 on			# LPC
-						chip superio/winbond/w83627ehg	# Super I/O
-							device pnp 2e.0 off	# Floppy
-								io 0x60 = 0x3f0
-								irq 0x70 = 6
-								drq 0x74 = 2
-							end
-							device pnp 2e.1 off	# Parallel port
-								io 0x60 = 0x378
-								irq 0x70 = 7
-							end
-							device pnp 2e.2 on	# Com1
-								io 0x60 = 0x3f8
-								irq 0x70 = 4
-							end
-							device pnp 2e.3 off	# Com2
-								io 0x60 = 0x2f8
-								irq 0x70 = 3
-							end
-							device pnp 2e.5 on	# PS/2 keyboard & mouse
-								io 0x60 = 0x60
-								io 0x62 = 0x64
-								irq 0x70 = 1
-								irq 0x72 = 12
-							end
-							device pnp 2e.106 off	# Serial flash interface (SFI)
-								io 0x60 = 0x100
-							end
-							device pnp 2e.007 off	# GPIO 1
-							end
-							device pnp 2e.107 off	# Game port
-								io 0x60 = 0x220
-							end
-							device pnp 2e.207 off	# MIDI
-								io 0x62 = 0x300
-								irq 0x70 = 9
-							end
-							device pnp 2e.307 off	# GPIO 6
-							end
-							device pnp 2e.8 off	# WDTO#, PLED
-							end
-							device pnp 2e.009 off	# GPIO 2
-							end
-							device pnp 2e.109 off	# GPIO 3
-							end
-							device pnp 2e.209 off	# GPIO 4
-							end
-							device pnp 2e.309 off	# GPIO 5
-							end
-							device pnp 2e.a off end	# ACPI
-							device pnp 2e.b on	# Hardware monitor
-								io 0x60 = 0x290
-								irq 0x70 = 5
-							end
-						end
-					end
-					device pci 1.1 on			# SM 0
-						chip drivers/generic/generic	# DIMM 0-0-0
-							device i2c 50 on end
-						end
-						chip drivers/generic/generic	# DIMM 0-0-1
-							device i2c 51 on end
-						end
-						chip drivers/generic/generic	# DIMM 0-1-0
-							device i2c 52 on end
-						end
-						chip drivers/generic/generic	# DIMM 0-1-1
-							device i2c 53 on end
-						end
-						chip drivers/generic/generic	# DIMM 1-0-0
-							device i2c 54 on end
-						end
-						chip drivers/generic/generic	# DIMM 1-0-1
-							device i2c 55 on end
-						end
-						chip drivers/generic/generic	# DIMM 1-1-0
-							device i2c 56 on end
-						end
-						chip drivers/generic/generic	# DIMM 1-1-1
-							device i2c 57 on end
-						end
-					end
-					device pci 1.1 on			# SM 1
-						# PCI device SMBus address will
-						# depend on addon PCI device, do
-						# we need to scan_smbus_bus?
-						# chip drivers/generic/generic	# PCIXA slot 1
-						#   device i2c 50 on end
-						# end
-						# chip drivers/generic/generic	# PCIXB slot 1
-						#   device i2c 51 on end
-						# end
-						# chip drivers/generic/generic	# PCIXB slot 2
-						#   device i2c 52 on end
-						# end
-						# chip drivers/generic/generic	# PCI slot 1
-						#   device i2c 53 on end
-						# end
-						# chip drivers/generic/generic	# Master MCP55 PCI-E
-						#   device i2c 54 on end
-						# end
-						# chip drivers/generic/generic	# Slave MCP55 PCI-E
-						#   device i2c 55 on end
-						# end
-						chip drivers/generic/generic	# MAC EEPROM
-							device i2c 51 on end
-						end
-					end
-					device pci 2.0 on end			# USB 1.1
-					device pci 2.1 on end			# USB 2
-					device pci 4.0 on end			# IDE
-					device pci 5.0 on end			# SATA 0
-					device pci 5.1 on end			# SATA 1
-					device pci 5.2 on end			# SATA 2
-					device pci 6.0 on end			# PCI
-					device pci 6.1 on end			# AZA
-					device pci 8.0 on end			# NIC
-					device pci 9.0 on end			# NIC
-					device pci a.0 on end			# PCI E 5
-					device pci b.0 off end			# PCI E 4
-					device pci c.0 off end			# PCI E 3
-					device pci d.0 on end			# PCI E 2
-					device pci e.0 off end			# PCI E 1
-					device pci f.0 on end			# PCI E 0
-					register "ide0_enable" = "1"
-					register "sata0_enable" = "1"
-					register "sata1_enable" = "1"
-					# 1: SMBus under 2e.8, 2: SM0 3: SM1
-					register "mac_eeprom_smbus" = "3"
-					register "mac_eeprom_addr" = "0x51"
-				end
-			end
-			device pci 18.0 on end			# Link 1
-			device pci 18.0 on			# Link 2 == LDT 2
-				chip southbridge/nvidia/mcp55		# Southbridge
-					device pci 0.0 on end			# HT
-					device pci 1.0 on end			# LPC
-					device pci 1.1 on end			# SM 0
-					device pci 2.0 off end			# USB 1.1
-					device pci 2.1 off end			# USB 2
-					device pci 4.0 off end			# IDE
-					device pci 5.0 on end			# SATA 0
-					device pci 5.1 on end			# SATA 1
-					device pci 5.2 on end			# SATA 2
-					device pci 6.0 off end			# PCI
-					device pci 6.1 off end			# AZA
-					device pci 8.0 on end			# NIC
-					device pci 9.0 on end			# NIC
-					device pci a.0 on end			# PCI E 5
-					device pci b.0 off end			# PCI E 4
-					device pci c.0 off end			# PCI E 3
-					device pci d.0 on end			# PCI E 2
-					device pci e.0 on end			# PCI E 1
-					device pci f.0 on end			# PCI E 0
-					register "ide0_enable" = "1"
-					register "sata0_enable" = "1"
-					register "sata1_enable" = "1"
-					# 1: SMBus under 2e.8, 2: SM0 3: SM1
-					register "mac_eeprom_smbus" = "3"
-					register "mac_eeprom_addr" = "0x51"
-				end
-			end
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end
-	end
-end
diff --git a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c
deleted file mode 100644
index 2a10eeb7a8..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-#include <stdlib.h>
-#include "mb_sysconf.h"
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-struct mb_sysconf_t mb_sysconf;
-
-unsigned pci1234x[] =
-{	//Here you only need to set value in pci1234 for HT-IO that could be installed or not
-	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-	0x0000ff0,
-	0x0000ff0,
-	0x0000ff0,
-//	0x0000ff0,
-//	0x0000ff0,
-//	0x0000ff0,
-//	0x0000ff0,
-//	0x0000ff0
-};
-unsigned hcdnx[] =
-{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
-	0x20202020,
-	0x20202020,
-	0x20202020,
-//	0x20202020,
-//	0x20202020,
-//	0x20202020,
-//	0x20202020,
-//	0x20202020,
-};
-
-
-
-
-static unsigned get_bus_conf_done = 0;
-
-static unsigned get_hcid(unsigned i)
-{
-	unsigned id = 0;
-
-	unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
-
-	unsigned devn = sysconf.hcdn[i] & 0xff;
-
-	struct device *dev;
-
-	dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
-
-	switch (dev->device) {
-	case 0x0369: //IO55
-		id = 4;
-		break;
-	}
-
-	// we may need more way to find out hcid: subsystem id? GPIO read ?
-
-	// we need use id for 1. bus num, 2. mptable, 3. ACPI table
-
-	return id;
-}
-
-void get_bus_conf(void)
-{
-	unsigned apicid_base;
-	struct mb_sysconf_t *m;
-
-	int i;
-
-	if (get_bus_conf_done)
-		return; //do it only once
-
-	get_bus_conf_done = 1;
-
-	sysconf.mb = &mb_sysconf;
-
-	m = sysconf.mb;
-	memset(m, 0, sizeof(struct mb_sysconf_t));
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
-
-	get_sblk_pci1234();
-
-	sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
-
-	m->sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain
-
-	m->bus_mcp55 = (sysconf.pci1234[0] >> 16) & 0xff;
-
-		/* MCP55b */
-	for (i = 1; i < sysconf.hc_possible_num; i++) {
-		if (!(sysconf.pci1234[i] & 0x0f))
-			continue;
-		// check hcid type here
-		sysconf.hcid[i] = get_hcid(i);
-		if (!sysconf.hcid[i])
-			continue; //unknown co processor
-
-		m->bus_mcp55b = (sysconf.pci1234[1]>>16) & 0xff;
-	}
-
-/*I/O APICs:	APIC ID	Version	State		Address*/
-	if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
-		apicid_base = get_apicid_base(2);
-	else
-		apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
-	m->apicid_mcp55 = apicid_base+0;
-	m->apicid_mcp55b = apicid_base+1;
-}
diff --git a/src/mainboard/nvidia/l1_2pvv/hda_verb.c b/src/mainboard/nvidia/l1_2pvv/hda_verb.c
deleted file mode 100644
index 31052f2a15..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/hda_verb.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2004 Tyan Computer
- * Copyright (C) 2006-2007 AMD
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[] = {
-	/* coreboot specific header */
-	0x10ec0880,	// Codec Vendor / Device ID: Realtek ALC880
-	0x00000000,	// Subsystem ID
-	0x0000000d,	// Number of jacks
-
-	/* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x0000e601 */
-	AZALIA_SUBVENDOR(0x0, 0x0000e601),
-
-	/* NID 0x14, FRONT-OUT-L/R */
-	AZALIA_PIN_CFG(0x0, 0x14, 0x01014410),
-
-	/* NID 0x15, SURR-OUT-L/R */
-	AZALIA_PIN_CFG(0x0, 0x15, 0x01011412),
-
-	/* NID 0x16, CEN/LFE-OUT */
-	AZALIA_PIN_CFG(0x0, 0x16, 0x01016011),
-
-	/* NID 0x17, SIDE-SURR-L/R */
-	AZALIA_PIN_CFG(0x0, 0x17, 0x01012014),
-
-	/* NID 0x18, MIC1-L/R, VREFO */
-	AZALIA_PIN_CFG(0x0, 0x18, 0x01a19c30),
-
-	/* NID 0x19, MIC2-L/R, VREFO */
-	AZALIA_PIN_CFG(0x0, 0x19, 0x02a19c40),
-
-	/* NID 0x1a, LINE1-L/R, VREFO */
-	AZALIA_PIN_CFG(0x0, 0x1a, 0x01813431),
-
-	/* NID 0x1b, LINE2-L/R, VREFO */
-	AZALIA_PIN_CFG(0x0, 0x1b, 0x0221441f),
-
-	/* NID 0x1c, CD-L/R / GND */
-	AZALIA_PIN_CFG(0x0, 0x1c, 0x411111f0),
-
-	/* NID 0x1d, PCBEEP */
-	AZALIA_PIN_CFG(0x0, 0x1d, 0x9983013e),
-
-	/* NID 0x1e, S/PDIF-OUT */
-	AZALIA_PIN_CFG(0x0, 0x1e, 0x01454120),
-
-	/* NID 0x1f, S/PDIF-IN */
-	AZALIA_PIN_CFG(0x0, 0x1f, 0x01c59150),
-};
-
-const u32 pc_beep_verbs[0] = {};
-
-AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/nvidia/l1_2pvv/irq_tables.c b/src/mainboard/nvidia/l1_2pvv/irq_tables.c
deleted file mode 100644
index 061d276b78..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/irq_tables.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-#include "mb_sysconf.h"
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
-			    uint8_t devfn, uint8_t link0, uint16_t bitmap0,
-			    uint8_t link1, uint16_t bitmap1, uint8_t link2,
-			    uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
-			    uint8_t slot, uint8_t rfu)
-{
-	pirq_info->bus = bus;
-	pirq_info->devfn = devfn;
-	pirq_info->irq[0].link = link0;
-	pirq_info->irq[0].bitmap = bitmap0;
-	pirq_info->irq[1].link = link1;
-	pirq_info->irq[1].bitmap = bitmap1;
-	pirq_info->irq[2].link = link2;
-	pirq_info->irq[2].bitmap = bitmap2;
-	pirq_info->irq[3].link = link3;
-	pirq_info->irq[3].bitmap = bitmap3;
-	pirq_info->slot = slot;
-	pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
-	struct irq_routing_table *pirq;
-	struct irq_info *pirq_info;
-	unsigned slot_num;
-	uint8_t *v;
-	struct mb_sysconf_t *m;
-	unsigned sbdn;
-
-	uint8_t sum = 0;
-	int i;
-
-	get_bus_conf();		// it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
-	sbdn = sysconf.sbdn;
-	m = sysconf.mb;
-
-	/* Align the table to be 16 byte aligned. */
-	addr += 15;
-	addr &= ~15;
-
-	/* This table must be between 0xf0000 & 0x100000 */
-	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
-	pirq = (void *)(addr);
-	v = (uint8_t *) (addr);
-
-	pirq->signature = PIRQ_SIGNATURE;
-	pirq->version = PIRQ_VERSION;
-
-	pirq->rtr_bus = m->bus_mcp55;
-	pirq->rtr_devfn = ((sbdn + 6) << 3) | 0;
-
-	pirq->exclusive_irqs = 0;
-
-	pirq->rtr_vendor = 0x10de;
-	pirq->rtr_device = 0x0370;
-
-	pirq->miniport_data = 0;
-
-	memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
-	pirq_info = (void *)(&pirq->checksum + 1);
-	slot_num = 0;
-//pci bridge
-	write_pirq_info(pirq_info, m->bus_mcp55, ((sbdn + 6) << 3) | 0, 0x1,
-			0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-	pirq_info++;
-	slot_num++;
-
-	for (i = 1; i < sysconf.hc_possible_num; i++) {
-		if (!(sysconf.pci1234[i] & 0x1))
-			continue;
-		unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
-		unsigned devn = sysconf.hcdn[i] & 0xff;
-
-		write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8,
-				0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-		pirq_info++;
-		slot_num++;
-	}
-
-	pirq->size = 32 + 16 * slot_num;
-
-	for (i = 0; i < pirq->size; i++)
-		sum += v[i];
-
-	sum = pirq->checksum - sum;
-
-	if (sum != pirq->checksum) {
-		pirq->checksum = sum;
-	}
-
-	printk(BIOS_INFO, "done.\n");
-
-	return (unsigned long)pirq_info;
-
-}
diff --git a/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h b/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h
deleted file mode 100644
index 64837f6174..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/mb_sysconf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef MB_SYSCONF_H
-#define MB_SYSCONF_H
-
-struct mb_sysconf_t {
-	unsigned char bus_mcp55;
-	unsigned char bus_mcp55b;
-	unsigned apicid_mcp55;
-	unsigned apicid_mcp55b;
-	unsigned sbdnb;
-};
-
-#endif
diff --git a/src/mainboard/nvidia/l1_2pvv/mptable.c b/src/mainboard/nvidia/l1_2pvv/mptable.c
deleted file mode 100644
index 76d2b81f79..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/mptable.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/amdk8_sysconf.h>
-#include "mb_sysconf.h"
-
-static void *smp_write_config_table(void *v)
-{
-	struct mp_config_table *mc;
-	struct mb_sysconf_t *m;
-	unsigned sbdn;
-	int i, j, bus_isa;
-	unsigned char apicpin[4];
-
-	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
-	mptable_init(mc, LOCAL_APIC_ADDR);
-
-	smp_write_processors(mc);
-
-	get_bus_conf();
-	sbdn = sysconf.sbdn;
-	m = sysconf.mb;
-
-	mptable_write_buses(mc, NULL, &bus_isa);
-
-/*I/O APICs:	APIC ID	Version	State		Address*/
-	{
-		struct device *dev;
-		struct resource *res;
-		uint32_t dword;
-
-		dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_1);
-			if (res)
-				smp_write_ioapic(mc, m->apicid_mcp55, 0x11,
-						 res2mmio(res, 0, 0));
-
-		/* Initialize interrupt mapping*/
-			dword = pci_read_config32(dev, 0x74);
-			dword &= ~(1 << 15);
-			dword |= 1 << 2;
-			pci_write_config32(dev, 0x74, dword);
-
-			dword = 0x43c6c643;
-			pci_write_config32(dev, 0x7c, dword);
-
-			dword = 0x81001a00;
-			pci_write_config32(dev, 0x80, dword);
-
-			dword = 0xd00012d2;
-			pci_write_config32(dev, 0x84, dword);
-
-		}
-
-	    if (m->bus_mcp55b) {
-		dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0));
-		if (dev) {
-			res = find_resource(dev, PCI_BASE_ADDRESS_1);
-			if (res)
-				smp_write_ioapic(mc, m->apicid_mcp55b, 0x11,
-						 res2mmio(res, 0, 0));
-
-			dword = 0x43c60000;
-			pci_write_config32(dev, 0x7c, dword);
-
-			dword = 0x81000000;
-			pci_write_config32(dev, 0x80, dword);
-
-			dword = 0xd00002d0;
-			pci_write_config32(dev, 0x84, dword);
-
-		}
-
-	    }
-
-	}
-
-	mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0);
-
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10
-
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
-
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
-
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23
-
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
-
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
-
-//Slot PCIE
-	for (j = 2; j < 8; j++) {
-		struct device *dev;
-		dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 0x0a + j - 2 , 0));
-		if (!dev || !dev->enabled)
-			continue;
-		for (i = 0; i < 4; i++)
-			apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4;
-		smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin);
-	}
-
-//Slot PCI 32
-	{
-		struct device *dev;
-		dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0));
-		if (dev && dev->enabled) {
-			for (i = 0; i < 4; i++)
-				apicpin[i] = 0x10 + (2+i)%4;
-			smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin);
-		}
-	}
-
-	if (m->bus_mcp55b) {
-		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|0, m->apicid_mcp55b, 0x14); // 20
-		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|1, m->apicid_mcp55b, 0x17); // 23
-		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|2, m->apicid_mcp55b, 0x15); // 21
-
-		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+8)<<2)|0, m->apicid_mcp55b, 0x16); // 22
-		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+9)<<2)|0, m->apicid_mcp55b, 0x15); // 21
-
-
-	//Slot  PCIE
-		for (j = 2; j < 8; j++) {
-			struct device *dev;
-			dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x0a + j - 2 , 0));
-			if (!dev || !dev->enabled)
-				continue;
-			for (i = 0; i < 4; i++) {
-				apicpin[i] = 0x10 + (2+j+i+4-m->sbdnb%4)%4;
-			}
-			smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55b, apicpin);
-		}
-
-	}
-
-/*Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#*/
-	mptable_lintsrc(mc, bus_isa);
-	/* There is no extension information... */
-
-	/* Compute the checksums */
-	return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
-	void *v;
-	v = smp_write_floating_table(addr, 0);
-	return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/nvidia/l1_2pvv/resourcemap.c b/src/mainboard/nvidia/l1_2pvv/resourcemap.c
deleted file mode 100644
index 85782b78da..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/resourcemap.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-static void setup_mb_resource_map(void)
-{
-	static const unsigned int register_values[] = {
-		/* Careful set limit registers before base registers which contain the enables */
-		/* DRAM Limit i Registers
-		 * F1:0x44 i = 0
-		 * F1:0x4C i = 1
-		 * F1:0x54 i = 2
-		 * F1:0x5C i = 3
-		 * F1:0x64 i = 4
-		 * F1:0x6C i = 5
-		 * F1:0x74 i = 6
-		 * F1:0x7C i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 3] Reserved
-		 * [10: 8] Interleave select
-		 *	   specifies the values of A[14:12] to use with interleave enable.
-		 * [15:11] Reserved
-		 * [31:16] DRAM Limit Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40 bit  address
-		 *	   that define the end of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-		PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-		PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-		PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-		PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-		PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-		PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-
-		/* DRAM Base i Registers
-		 * F1:0x40 i = 0
-		 * F1:0x48 i = 1
-		 * F1:0x50 i = 2
-		 * F1:0x58 i = 3
-		 * F1:0x60 i = 4
-		 * F1:0x68 i = 5
-		 * F1:0x70 i = 6
-		 * F1:0x78 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 7: 2] Reserved
-		 * [10: 8] Interleave Enable
-		 *	   000 = No interleave
-		 *	   001 = Interleave on A[12] (2 nodes)
-		 *	   010 = reserved
-		 *	   011 = Interleave on A[12] and A[14] (4 nodes)
-		 *	   100 = reserved
-		 *	   101 = reserved
-		 *	   110 = reserved
-		 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-		 * [15:11] Reserved
-		 * [13:16] DRAM Base Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40-bit address
-		 *	   that define the start of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
-		/* Memory-Mapped I/O Limit i Registers
-		 * F1:0x84 i = 0
-		 * F1:0x8C i = 1
-		 * F1:0x94 i = 2
-		 * F1:0x9C i = 3
-		 * F1:0xA4 i = 4
-		 * F1:0xAC i = 5
-		 * F1:0xB4 i = 6
-		 * F1:0xBC i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = Reserved
-		 * [ 6: 6] Reserved
-		 * [ 7: 7] Non-Posted
-		 *	   0 = CPU writes may be posted
-		 *	   1 = CPU writes must be non-posted
-		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-		 *	   This field defines the upp adddress bits of a 40-bit address that
-		 *	   defines the end of a memory-mapped I/O region n
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
-
-		/* Memory-Mapped I/O Base i Registers
-		 * F1:0x80 i = 0
-		 * F1:0x88 i = 1
-		 * F1:0x90 i = 2
-		 * F1:0x98 i = 3
-		 * F1:0xA0 i = 4
-		 * F1:0xA8 i = 5
-		 * F1:0xB0 i = 6
-		 * F1:0xB8 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Cpu Disable
-		 *	   0 = Cpu can use this I/O range
-		 *	   1 = Cpu requests do not use this I/O range
-		 * [ 3: 3] Lock
-		 *	   0 = base/limit registers i are read/write
-		 *	   1 = base/limit registers i are read-only
-		 * [ 7: 4] Reserved
-		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-		 *	   This field defines the upper address bits of a 40bit address
-		 *	   that defines the start of memory-mapped I/O region i
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
-		/* PCI I/O Limit i Registers
-		 * F1:0xC4 i = 0
-		 * F1:0xCC i = 1
-		 * F1:0xD4 i = 2
-		 * F1:0xDC i = 3
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = reserved
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Limit Address i
-		 *	   This field defines the end of PCI I/O region n
-		 * [31:25] Reserved
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
-//		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset
-		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
-		/* PCI I/O Base i Registers
-		 * F1:0xC0 i = 0
-		 * F1:0xC8 i = 1
-		 * F1:0xD0 i = 2
-		 * F1:0xD8 i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 3: 2] Reserved
-		 * [ 4: 4] VGA Enable
-		 *	   0 = VGA matches Disabled
-		 *	   1 = matches all address < 64K and where A[9:0] is in the
-		 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-		 * [ 5: 5] ISA Enable
-		 *	   0 = ISA matches Disabled
-		 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-		 *	       from matching agains this base/limit pair
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Base i
-		 *	   This field defines the start of PCI I/O region n
-		 * [31:25] Reserved
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
-//		PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033,
-		PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
-		/* Config Base and Limit i Registers
-		 * F1:0xE0 i = 0
-		 * F1:0xE4 i = 1
-		 * F1:0xE8 i = 2
-		 * F1:0xEC i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Device Number Compare Enable
-		 *	   0 = The ranges are based on bus number
-		 *	   1 = The ranges are ranges of devices on bus 0
-		 * [ 3: 3] Reserved
-		 * [ 6: 4] Destination Node
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 7] Reserved
-		 * [ 9: 8] Destination Link
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 - Reserved
-		 * [15:10] Reserved
-		 * [23:16] Bus Number Base i
-		 *	   This field defines the lowest bus number in configuration region i
-		 * [31:24] Bus Number Limit i
-		 *	   This field defines the highest bus number in configuration region i
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of CPU 0 --> Nvidia MCP55 Pro */
-//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of CPU 0 --> nvidia io55 */
-		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
-	};
-
-	int max;
-	max = ARRAY_SIZE(register_values);
-	setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c
deleted file mode 100644
index d6962f0458..0000000000
--- a/src/mainboard/nvidia/l1_2pvv/romstage.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 AMD
- * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <lib.h>
-#include <spd.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include <southbridge/nvidia/mcp55/mcp55.h>
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include <cpu/x86/lapic.h>
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627ehg/w83627ehg.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
-
-unsigned get_sbdn(unsigned bus);
-
-unsigned get_sbdn(unsigned bus)
-{
-	pci_devfn_t dev;
-
-	/* Find the device. */
-	dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA,
-				       PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus);
-
-	return (dev >> 15) & 0x1f;
-}
-
-void memreset(int controllers, const struct mem_controller *ctrl) { }
-void activate_spd_rom(const struct mem_controller *ctrl) { }
-
-int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include <northbridge/amd/amdk8/f.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define MCP55_MB_SETUP \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
-	RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
-
-#include <southbridge/nvidia/mcp55/early_setup_ss.h>
-#include "southbridge/nvidia/mcp55/early_setup_car.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-#include "cpu/amd/model_fxx/fidvid.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-static void sio_setup(void)
-{
-	uint32_t dword;
-	uint8_t byte;
-
-	byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
-	byte |= 0x20;
-	pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
-	dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
-	dword |= (1 << 0);
-	pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
-	dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
-	dword |= (1 << 16);
-	pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
-}
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	static const uint16_t spd_addr [] = {
-		// Node 0
-		DIMM0, DIMM2, 0, 0,
-		DIMM1, DIMM3, 0, 0,
-		// Node 1
-		DIMM4, DIMM6, 0, 0,
-		DIMM5, DIMM7, 0, 0,
-	};
-
-	struct sys_info *sysinfo = &sysinfo_car;
-	int needs_reset = 0;
-	unsigned bsp_apicid = 0;
-
-	if (!cpu_init_detectedx && boot_cpu()) {
-		/* Nothing special needs to be done to find bus 0 */
-		/* Allow the HT devices to be found */
-		enumerate_ht_chain();
-		sio_setup();
-	}
-
-	if (bist == 0)
-		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
-
-	pnp_enter_conf_state(SERIAL_DEV);
-	pnp_write_config(SERIAL_DEV, 0x24, 0);
-	pnp_exit_conf_state(SERIAL_DEV);
-
-	setup_mb_resource_map();
-
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-	printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
-
-	printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
-
-	set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
-	setup_coherent_ht_domain(); // routing table and start other core0
-
-	wait_all_core0_started();
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
-	// It is said that we should start core1 after all core0 launched
-	/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
-	 * So here need to make sure last core0 is started, esp for two way system,
-	 * (there may be apic id conflicts in that case)
-	 */
-	start_other_cores();
-	wait_all_other_cores_started(bsp_apicid);
-#endif
-
-	/* it will set up chains and store link pair for optimization later */
-	ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-
-#if IS_ENABLED(CONFIG_SET_FIDVID)
-	{
-		msr_t msr;
-		msr = rdmsr(0xc0010042);
-		printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
-	}
-	enable_fid_change();
-	enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-	init_fidvid_bsp(bsp_apicid);
-	// show final fid and vid
-	{
-		msr_t msr;
-		msr = rdmsr(0xc0010042);
-		printk(BIOS_DEBUG, "end   msr fid, vid %08x%08x\n", msr.hi, msr.lo);
-	}
-#endif
-
-	init_timer(); /* Need to use TMICT to synchronize FID/VID. */
-
-	needs_reset |= optimize_link_coherent_ht();
-	needs_reset |= optimize_link_incoherent_ht(sysinfo);
-	needs_reset |= mcp55_early_setup_x();
-
-	// fidvid change will issue one LDTSTOP and the HT change will be effective too
-	if (needs_reset) {
-		printk(BIOS_INFO, "ht reset -\n");
-		soft_reset();
-	}
-	allow_all_aps_stop(bsp_apicid);
-
-	//It's the time to set ctrl in sysinfo now;
-	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
-	enable_smbus();
-
-	/* all ap stopped? */
-
-	sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-}