Since some people disapprove of white space cleanups mixed in regular commits

while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 13 insertions, 13 deletions

diff --git a/src/mainboard/newisys/Kconfig b/src/mainboard/newisys/Kconfig
index fd8f9176e1..308cced541 100644
--- a/src/mainboard/newisys/Kconfig
+++ b/src/mainboard/newisys/Kconfig
@@ -1,7 +1,7 @@
 choice
 	prompt "Mainboard model"
 	depends on VENDOR_NEWISYS
-        
+
 source "src/mainboard/newisys/khepri/Kconfig"
 
 endchoice
diff --git a/src/mainboard/newisys/khepri/devicetree.cb b/src/mainboard/newisys/khepri/devicetree.cb
index cb8f356e5a..30e73f774d 100644
--- a/src/mainboard/newisys/khepri/devicetree.cb
+++ b/src/mainboard/newisys/khepri/devicetree.cb
@@ -10,7 +10,7 @@ chip northbridge/amd/amdk8/root_complex
 
 	device pci_domain 0 on
 		chip northbridge/amd/amdk8
-			device pci 18.0 on end # LDT 0 
+			device pci 18.0 on end # LDT 0
 			device pci 18.0 on     # LDT 1
 				chip southbridge/amd/amd8131
 					device pci 0.0 on end
@@ -57,7 +57,7 @@ chip northbridge/amd/amdk8/root_complex
 								io 0x60 = 0x220
 								io 0x62 = 0x300
 								irq 0x70 = 9
-							end						
+							end
                 	        			device pnp 2e.8 off end #  GPIO2
                 	        			device pnp 2e.9 off end #  GPIO3
                 	        			device pnp 2e.a off end #  ACPI
@@ -69,7 +69,7 @@ chip northbridge/amd/amdk8/root_complex
 					end
 					device pci 1.1 on end
 					device pci 1.2 on end
-					device pci 1.3 on end 
+					device pci 1.3 on end
 					device pci 1.5 on end
 					device pci 1.6 on end
 				end
@@ -87,6 +87,6 @@ chip northbridge/amd/amdk8/root_complex
 			device pci 19.2 on end
 			device pci 19.3 on end
 		end
-	end 
+	end
 end
 
diff --git a/src/mainboard/newisys/khepri/resourcemap.c b/src/mainboard/newisys/khepri/resourcemap.c
index d533b6357e..81bdefa835 100644
--- a/src/mainboard/newisys/khepri/resourcemap.c
+++ b/src/mainboard/newisys/khepri/resourcemap.c
@@ -151,7 +151,7 @@ static void setup_khepri_resource_map(void)
 	 *	   1 = base/limit registers i are read-only
 	 * [ 7: 4] Reserved
 	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-	 *	   This field defines the upper address bits of a 40bit address 
+	 *	   This field defines the upper address bits of a 40bit address
 	 *	   that defines the start of memory-mapped I/O region i
 	 */
 	PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
@@ -207,7 +207,7 @@ static void setup_khepri_resource_map(void)
 	 * [ 3: 2] Reserved
 	 * [ 4: 4] VGA Enable
 	 *	   0 = VGA matches Disabled
-	 *	   1 = matches all address < 64K and where A[9:0] is in the 
+	 *	   1 = matches all address < 64K and where A[9:0] is in the
 	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
 	 * [ 5: 5] ISA Enable
 	 *	   0 = ISA matches Disabled
@@ -215,7 +215,7 @@ static void setup_khepri_resource_map(void)
 	 *	       from matching agains this base/limit pair
 	 * [11: 6] Reserved
 	 * [24:12] PCI I/O Base i
-	 *	   This field defines the start of PCI I/O region n 
+	 *	   This field defines the start of PCI I/O region n
 	 * [31:25] Reserved
 	 */
 	PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
diff --git a/src/mainboard/newisys/khepri/romstage.c b/src/mainboard/newisys/khepri/romstage.c
index e8c040950f..bf1186df46 100644
--- a/src/mainboard/newisys/khepri/romstage.c
+++ b/src/mainboard/newisys/khepri/romstage.c
@@ -1,10 +1,10 @@
 /*
  * This code is derived from the Tyan s2882 romstage.c
  * Adapted by Stefan Reinauer <stepan@coresystems.de>
- * Additional (C) 2007 coresystems GmbH 
+ * Additional (C) 2007 coresystems GmbH
  */
 
- 
+
 #include <stdint.h>
 #include <string.h>
 #include <device/pci_def.h>
@@ -81,7 +81,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "lib/generic_sdram.c"
 
  /* newisys khepri does not want the default */
-#include "resourcemap.c" 
+#include "resourcemap.c"
 
 #if CONFIG_LOGICAL_CPUS==1
 #define SET_NB_CFG_54 1
@@ -129,13 +129,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
         }
 
 //	post_code(0x32);
-	
+
  	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
         uart_init();
         console_init();
 
 //	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-	
+
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);