diff options
author | Timothy Pearson <tpearson@raptorengineeringinc.com> | 2010-03-01 10:56:51 +0000 |
---|---|---|
committer | Patrick Georgi <patrick.georgi@coresystems.de> | 2010-03-01 10:56:51 +0000 |
commit | d3b2bbe08c59e36488ca9d04d01ddd61c04504ca (patch) | |
tree | 448855c54db7dc270376fe5b97bdfe4307af96df /src/mainboard/msi/ms9652_fam10 | |
parent | 55cf7bcbeb605648ccfa2fdab102506f87388c07 (diff) |
Add msi/ms9652_fam10 board.
Updated Timothy's patch to match recent changes in the tree. It's build tested.
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5180 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/msi/ms9652_fam10')
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/Kconfig | 288 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/acpi_tables.c | 207 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/chip.h | 27 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/cmos.layout | 119 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/devicetree.cb | 155 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/dsdt.asl | 302 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/get_bus_conf.c | 140 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/irq_tables.c | 138 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/mainboard.c | 31 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/mb_sysconf.h | 34 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/mptable.c | 162 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/resourcemap.c | 287 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/romstage.c | 389 | ||||
-rw-r--r-- | src/mainboard/msi/ms9652_fam10/spd_addr.h | 110 |
14 files changed, 2389 insertions, 0 deletions
diff --git a/src/mainboard/msi/ms9652_fam10/Kconfig b/src/mainboard/msi/ms9652_fam10/Kconfig new file mode 100644 index 0000000000..ccacb67b15 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/Kconfig @@ -0,0 +1,288 @@ +config BOARD_MSI_MS9652_FAM10 + bool "MS9652 Fam10 (Speedster K9ND)" + select ARCH_X86 + select CPU_AMD_SOCKET_F_1207 + select NORTHBRIDGE_AMD_AMDFAM10 + select NORTHBRIDGE_AMD_AMDFAM10_ROOT_COMPLEX + select SOUTHBRIDGE_NVIDIA_MCP55 + select SUPERIO_WINBOND_W83627EHG + select HAVE_BUS_CONFIG + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select USE_PRINTK_IN_CAR + select USE_DCACHE_RAM + select HAVE_HARD_RESET + select BOARD_ROMSIZE_KB_512 + select ENABLE_APIC_EXT_ID + select AMDMCT + select TINY_BOOTBLOCK + +config MAINBOARD_DIR + string + default msi/ms9652_fam10 + depends on BOARD_MSI_MS9652_FAM10 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + depends on BOARD_MSI_MS9652_FAM10 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + depends on BOARD_MSI_MS9652_FAM10 + +config DCACHE_RAM_GLOBAL_VAR_SIZE + hex + default 0x04000 + depends on BOARD_MSI_MS9652_FAM10 + +config CONFIG_ACPI_SSDTX_NUM + hex + default 0x1F + depends on BOARD_MSI_MS9652_FAM10 + +config USE_FALLBACK_IMAGE + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config HAVE_FALLBACK_BOOT + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config CONFIG_USE_FAILOVER_IMAGE + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config CONFIG_HAVE_FAILOVER_BOOT + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config GENERATE_PIRQ_TABLE + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config CONFIG_IRQ_SLOT_COUNT + hex + default 0x0b + depends on BOARD_MSI_MS9652_FAM10 + +config HAVE_OPTION_TABLE + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config MAX_CPUS + int + default 8 + depends on BOARD_MSI_MS9652_FAM10 + +config MAX_PHYSICAL_CPUS + int + default 2 + depends on BOARD_MSI_MS9652_FAM10 + +config LOGICAL_CPUS + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config IOAPIC + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config SMP + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config STACK_SIZE + hex + default 0x20000 + depends on BOARD_MSI_MS9652_FAM10 + +config HEAP_SIZE + hex + default 0x20000 + depends on BOARD_MSI_MS9652_FAM10 + +config USE_OPTION_TABLE + bool + default n + depends on BOARD_MSI_MS9652_FAM10 + +config LB_CKS_RANGE_START + int + default 49 + depends on BOARD_MSI_MS9652_FAM10 + +config LB_CKS_RANGE_END + int + default 122 + depends on BOARD_MSI_MS9652_FAM10 + +config LB_CKS_LOC + int + default 123 + depends on BOARD_MSI_MS9652_FAM10 + +config MAINBOARD_PART_NUMBER + string + default "MS-9256" + depends on BOARD_MSI_MS9652_FAM10 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1462 + depends on BOARD_MSI_MS9652_FAM10 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x9652 + depends on BOARD_MSI_MS9652_FAM10 + +config RAMBASE + hex + default 0x00200000 + depends on BOARD_MSI_MS9652_FAM10 + +config TTYS0_BAUD + int + default 115200 + depends on BOARD_MSI_MS9652_FAM10 + +config TTYS0_BASE + hex + default 0x3f8 + depends on BOARD_MSI_MS9652_FAM10 + +config TTYS0_LCS + int + default 3 + depends on BOARD_MSI_MS9652_FAM10 + +config DEFAULT_CONSOLE_LOGLEVEL + int + default 9 + depends on BOARD_MSI_MS9652_FAM10 + +config MAXIMUM_CONSOLE_LOGLEVEL + int + default 9 + depends on BOARD_MSI_MS9652_FAM10 + +config MAINBOARD_POWER_ON_AFTER_POWER_FAIL + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config CONSOLE_SERIAL8250 + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config CONSOLE_VGA + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config PCI_ROM_RUN + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config USBDEBUG_DIRECT + bool + default n + depends on BOARD_MSI_MS9652_FAM10 + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + depends on BOARD_MSI_MS9652_FAM10 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + depends on BOARD_MSI_MS9652_FAM10 + +config HT_CHAIN_UNITID_BASE + hex + default 0x20 + depends on BOARD_MSI_MS9652_FAM10 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x00 + depends on BOARD_MSI_MS9652_FAM10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + depends on BOARD_MSI_MS9652_FAM10 + +config SB_HT_CHAIN_UNITID_OFFSET_ONLY + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config VAR_MTRR_HOLE + bool + default n + depends on BOARD_MSI_MS9652_FAM10 + +config USE_INIT + bool + default n + depends on BOARD_MSI_MS9652_FAM10 + +config SERIAL_CPU_INIT + bool + default y + depends on BOARD_MSI_MS9652_FAM10 + +config APIC_ID_OFFSET + hex + default 0x00 + depends on BOARD_MSI_MS9652_FAM10 + +config LIFT_BSP_APIC_ID + bool + default 1 + depends on BOARD_MSI_MS9652_FAM10 + +config RAMTOP + hex + default 0x1000000 + depends on BOARD_MSI_MS9652_FAM10 + +config MEM_TRAIN_SEQ + int + default 2 + depends on BOARD_MSI_MS9652_FAM10 + +config WAIT_BEFORE_CPUS_INIT + bool + default n + depends on BOARD_MSI_MS9652_FAM10 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_01000096.h" + depends on BOARD_MSI_MS9652_FAM10 + +config ID_SECTION_OFFSET + hex + default 0x80 + depends on BOARD_MSI_MS9652_FAM10 + +config HT3_SUPPORT + bool + default y + depends on BOARD_MSI_MS9652_FAM10 diff --git a/src/mainboard/msi/ms9652_fam10/acpi_tables.c b/src/mainboard/msi/ms9652_fam10/acpi_tables.c new file mode 100644 index 0000000000..0af873c216 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/acpi_tables.c @@ -0,0 +1,207 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer <stepan@openbios.org>. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> + * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> + * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> + * Copyright (C) 2009 Harald Gutmann <harald.gutmann@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci_ids.h> +//#include <../../../northbridge/amd/amdfam10/amdfam10_acpi.h> +#include <cpu/amd/model_fxx_powernow.h> +#include <device/pci.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +extern unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + struct mb_sysconf_t *m; + //extern unsigned char bus_mcp55[8]; + //extern unsigned apicid_mcp55; + extern void get_bus_conf(void); + unsigned sbdn; + struct resource *res; + device_t dev; + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + m->apicid_mcp55, res->base, 0); + } + } + + /* Write NB IOAPIC. */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + m->apicid_mcp55++, res->base, gsi_base); + } + } + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + //k8acpi_write_vars(); + //amd_model_fxx_generate_powernow(0, 0, 0); + //return (unsigned long) (acpigen_get_current()); + return 0; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_srat_t *srat; + acpi_rsdt_t *rsdt; + acpi_mcfg_t *mcfg; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_slit_t *slit; + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + /* Align ACPI tables to 16 byte. */ + start = (start + 0x0f) & -0x10; + current = start; + + printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT table. */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* Clear all table memory. */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* We explicitly add these tables later on: */ + printk_debug("ACPI: * FACS\n"); + + /* we should align FACS to 64B as per ACPI specs */ + current = ALIGN(current, 64); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + dsdt = (acpi_header_t *) current; + current += ((acpi_header_t *) AmlCode)->length; + memcpy((void *) dsdt, (void *) AmlCode, + ((acpi_header_t *) AmlCode)->length); + dsdt->checksum = 0; /* Don't trust iasl to get this right. */ + dsdt->checksum = acpi_checksum(dsdt, dsdt->length); + printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, + dsdt->length); + printk_debug("ACPI: * FADT\n"); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk_debug("ACPI: * HPET\n"); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET timers Linux wants an MADT. */ + printk_debug("ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + printk_debug("ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + acpi_add_table(rsdp, mcfg); + + printk_debug("ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + printk_debug("ACPI: * SLIT\n"); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current+=slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + printk_debug("ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, "DYNADATA"); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk_info("ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/msi/ms9652_fam10/chip.h b/src/mainboard/msi/ms9652_fam10/chip.h new file mode 100644 index 0000000000..556dc7ea1d --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/chip.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config { +// int fixup_scsi; +// int fixup_vga; +}; diff --git a/src/mainboard/msi/ms9652_fam10/cmos.layout b/src/mainboard/msi/ms9652_fam10/cmos.layout new file mode 100644 index 0000000000..07492b6695 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/cmos.layout @@ -0,0 +1,119 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu@amd.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 quad_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/msi/ms9652_fam10/devicetree.cb b/src/mainboard/msi/ms9652_fam10/devicetree.cb new file mode 100644 index 0000000000..ecc71b6af9 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/devicetree.cb @@ -0,0 +1,155 @@ +## Copyright (C) 2010 Raptor Engineering +## Written by Timothy Pearson <tpearson@raptorengineeringinc.com> for Raptor Engineering. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu@amd.com> for AMD. + +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 #mc0 + device pci 18.0 on # SB on HT link 0.0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SERIAL_FLASH + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + device pnp 2e.106 off # Serial flash + io 0x60 = 0x100 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end +# chip drivers/generic/generic #MAC EEPROM +# device i2c 51 on end +# end + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.0 on end # HT 1.0 + device pci 18.0 on end # HT 2.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end +end #root_complex diff --git a/src/mainboard/msi/ms9652_fam10/dsdt.asl b/src/mainboard/msi/ms9652_fam10/dsdt.asl new file mode 100644 index 0000000000..678d339ce3 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/dsdt.asl @@ -0,0 +1,302 @@ +/* + * This file is part of the coreboot project. + * + * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com> + * (C) Copyright 2007, 2008 Rudolf Marek <r.marek@assembler.cz> + * (C) Copyright 2009 Harald Gutmann <harald.gutmann@gmx.net> + * + * ISA portions taken from QEMU acpi-dsdt.dsl. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) +{ + Include ("../../../../src/northbridge/amd/amdk8/amdk8_util.asl") + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + */ + Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (\_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + */ + Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) + Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) + Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */ + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */ + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */ + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */ + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */ + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */ + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */ + }) + + Device (PEBF) /* PCI-E Bridge F */ + { + Name (_ADR, 0x000F0000) + Name (_UID, 0x00) + Name (_BBN, 0x07) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (PEBE) /* PCI-E Bridge E */ + { + Name (_ADR, 0x000E0000) + Name (_UID, 0x00) + Name (_BBN, 0x06) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (PEBD) /* PCI-E Bridge D */ + { + Name (_ADR, 0x000D0000) + Name (_UID, 0x00) + Name (_BBN, 0x05) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 }, + }) + } + + Device (PEBC) /* PCI-E Bridge C */ + { + Name (_ADR, 0x000C0000) + Name (_UID, 0x00) + Name (_BBN, 0x04) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, + }) + } + + Device (PEBB) /* PCI-E Bridge B */ + { + Name (_ADR, 0x000B0000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (PEBA) /* PCI-E Bridge A */ + { + Name (_ADR, 0x000A0000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (PCID) /* PCI Device */ + { + Name (_ADR, 0x00060000) + Name (_UID, 0x00) + Name (_BBN, 0x01) + Name (_PRT, Package () { + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */ + Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 }, + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */ + Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */ + Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 }, + }) + } + } + + Device (ISA) { + Name (_ADR, 0x000010000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP0, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP0) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP1, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {12} + }) + Return (TMP1) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06) + IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + /* Parallel Port */ + Device (LPT1) + { + Name (_HID, EisaId ("PNP0400")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () { + IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) + IRQNoFlags () {7} + }) + Return (BUF1) + } + } + /* Parallel Port ECP */ + Device (ECP1) + { + Name (_HID, EisaId ("PNP0401")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () { + IO (Decode16, 0x0378, 0x0378, 0x01, 0x04) + IO (Decode16, 0x0778, 0x0778, 0x01, 0x04) + IRQNoFlags() {7} + DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3} + }) + Return (BUF1) + } + } + } + } +} diff --git a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c new file mode 100644 index 0000000000..35ad714b13 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c @@ -0,0 +1,140 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/quadcore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be +installed or not You may need to preset pci1234 for HTIO board, please +refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, + }; + + +/* HT Chain device num, actually it is unit id base of every ht device +in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i, j; + + printk_spew("get_bus_conf()\n"); + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + m->bus_type[0] = 1; //pci + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } + + for(i=2; i<8;i++) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } + } + + for(i=0; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff; + for (j = busn; j <= busn_max; j++) + m->bus_type[j] = 1; + if(m->bus_isa <= busn_max) + m->bus_isa = busn_max + 1; + printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(1); + printk_spew("CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n"); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + printk_spew("CONFIG_LOGICAL_CPUS==0: apicid_base: %08x\n"); +#endif + m->apicid_mcp55 = apicid_base+0; +} diff --git a/src/mainboard/msi/ms9652_fam10/irq_tables.c b/src/mainboard/msi/ms9652_fam10/irq_tables.c new file mode 100644 index 0000000000..ea870a147b --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/irq_tables.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern void get_bus_conf(void); + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } + +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + if(sysconf.nodes>32) { + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/msi/ms9652_fam10/mainboard.c b/src/mainboard/msi/ms9652_fam10/mainboard.c new file mode 100644 index 0000000000..d1faac990d --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/mainboard.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("MSI MS-9652 Mainboard (Family 10)") +}; diff --git a/src/mainboard/msi/ms9652_fam10/mb_sysconf.h b/src/mainboard/msi/ms9652_fam10/mb_sysconf.h new file mode 100644 index 0000000000..83f9dbab28 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/mb_sysconf.h @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_isa; + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; + unsigned bus_type[256]; + +}; + +#endif + diff --git a/src/mainboard/msi/ms9652_fam10/mptable.c b/src/mainboard/msi/ms9652_fam10/mptable.c new file mode 100644 index 0000000000..3ddae1ccdc --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/mptable.c @@ -0,0 +1,162 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern void get_bus_conf(void); + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "MSI "; + static const char productid[12] = "K9ND MS-9652"; + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + + int i,j; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(j= 0; j < 256 ; j++) { + if(m->bus_type[j]) + smp_write_bus(mc, j, "PCI "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00012d2; + pci_write_config32(dev, 0x84, dword); + + } + + + } + + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_mcp55, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_mcp55, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_mcp55, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_mcp55, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_mcp55, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_mcp55, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_mcp55, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + + for(j=7; j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/msi/ms9652_fam10/resourcemap.c b/src/mainboard/msi/ms9652_fam10/resourcemap.c new file mode 100644 index 0000000000..4fe4f4d711 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/resourcemap.c @@ -0,0 +1,287 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00004000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + /* Verified against board configuration registers after normal proprietary BIOS boot */ + //PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + /* Verified against board configuration registers after normal proprietary BIOS boot */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} + diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c new file mode 100644 index 0000000000..96806609d9 --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/romstage.c @@ -0,0 +1,389 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu@amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#define RAMINIT_SYSINFO 1 + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#define QRANK_DIMM_SUPPORT 1 + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#endif + +#define FAM10_SET_FIDVID 1 +#define FAM10_SET_FIDVID_CORE_RANGE 0 + +#define DBGP_DEFAULT 7 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" + + static void post_code(u8 value) { + outb(value, 0x80); + } + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "arch/i386/lib/console.c" +#if CONFIG_USBDEBUG_DIRECT +#include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c" +#include "pc80/usbdebug_direct_serial.c" +#endif +#include "lib/ramtest.c" + +#include <cpu/amd/model_10xxx_rev.h> + +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" + +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdfam10/reset_test.c" +#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c" + +#if CONFIG_USE_FAILOVER_IMAGE==0 + +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdfam10/debug.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" + +#include "northbridge/amd/amdfam10/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) +#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC) + +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdht/ht_wrapper.c" + +#include "include/cpu/x86/mem.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/raminit_amdmct.c" +#include "northbridge/amd/amdfam10/amdfam10_pci.c" + +#include "resourcemap.c" + +#include "cpu/amd/quadcore/quadcore.c" + +#define MCP55_NUM 1 +#define MCP55_USE_NIC 1 +#define MCP55_USE_AZA 1 + +#define MCP55_PCI_E_X_0 1 + +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + +#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" +#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" + +#include "cpu/amd/car/copy_and_run.c" + +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_10xxx/init_cpus.c" + +#include "cpu/amd/model_10xxx/fidvid.c" + +#endif + +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" +#include "northbridge/amd/amdfam10/early_ht.c" + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + +} + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if CONFIG_HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if CONFIG_USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if CONFIG_USE_FAILOVER_IMAGE==0 +#include "spd_addr.h" +#include "cpu/amd/microcode/microcode.c" +#include "cpu/amd/model_10xxx/update_microcode.c" + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + u32 bsp_apicid = 0; + u32 val; + u8 reg; + u32 wants_reset; + msr_t msr; + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + post_code(0x32); + + pnp_enter_ext_func_mode(SERIAL_DEV); + /* We have 24MHz input. */ + reg = pnp_read_config(SERIAL_DEV, 0x24); + pnp_write_config(SERIAL_DEV, 0x24, (reg & 0xbf)); + pnp_exit_ext_func_mode(SERIAL_DEV); + + w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + uart_init(); + console_init(); + printk_debug("\n"); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +#if CONFIG_USBDEBUG_DIRECT + mcp55_enable_usbdebug_direct(DBGP_DEFAULT); + early_usbdebug_direct_init(); +#endif + + val = cpuid_eax(1); + printk_debug("BSP Family_Model: %08x \n", val); + printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk_debug("bsp_apicid = %02x \n", bsp_apicid); + printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + printk_debug("finalize_node_setup done \n"); + + /* Setup any mainboard PCI settings etc. */ + printk_debug("setup_mb_resource_map begin \n"); + setup_mb_resource_map(); + printk_debug("setup_mb_resource_map end \n"); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS==1 + /* Core0 on each node is configured. Now setup any additional cores. */ + printk_debug("start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + printk_debug("wait_all_other_cores_started()\n"); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + +#if FAM10_SET_FIDVID == 1 + msr = rdmsr(0xc0010071); + printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); +#endif + + wants_reset = mcp55_early_setup_x(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + if (wants_reset) + printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk_debug("fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + post_code(0x3D); + + printk_debug("enable_smbus()\n"); + enable_smbus(); + post_code(0x3E); + + memreset_setup(); + post_code(0x40); + + printk_debug("raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + + printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + + +#endif diff --git a/src/mainboard/msi/ms9652_fam10/spd_addr.h b/src/mainboard/msi/ms9652_fam10/spd_addr.h new file mode 100644 index 0000000000..915ee8bd7c --- /dev/null +++ b/src/mainboard/msi/ms9652_fam10/spd_addr.h @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * This file defines the SPD addresses for the mainboard. Must be included in + * cache_as_ram_auto.c + */ + +#define RC00 0 +#define RC01 1 +#define RC02 2 +#define RC03 3 +#define RC04 4 +#define RC05 5 +#define RC06 6 +#define RC07 7 +#define RC08 8 +#define RC09 9 +#define RC10 10 +#define RC11 11 +#define RC12 12 +#define RC13 13 +#define RC14 14 +#define RC15 15 +#define RC16 16 +#define RC17 17 +#define RC18 18 +#define RC19 19 +#define RC20 20 +#define RC21 21 +#define RC22 22 +#define RC23 23 +#define RC24 24 +#define RC25 25 +#define RC26 26 +#define RC27 27 +#define RC28 28 +#define RC29 29 +#define RC30 30 +#define RC31 31 + +#define RC32 32 +#define RC33 33 +#define RC34 34 +#define RC35 35 +#define RC36 36 +#define RC37 37 +#define RC38 38 +#define RC39 39 +#define RC40 40 +#define RC41 41 +#define RC42 42 +#define RC43 43 +#define RC44 44 +#define RC45 45 +#define RC46 46 +#define RC47 47 +#define RC48 48 +#define RC49 49 +#define RC50 50 +#define RC51 51 +#define RC52 52 +#define RC53 53 +#define RC54 54 +#define RC55 55 +#define RC56 56 +#define RC57 57 +#define RC58 58 +#define RC59 59 +#define RC60 60 +#define RC61 61 +#define RC62 62 +#define RC63 63 + + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +static const u8 spd_addr[] = { + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, +#endif +}; + |