summaryrefslogtreecommitdiff
path: root/src/mainboard/msi/ms9185
diff options
context:
space:
mode:
authorKyösti Mälkki <kyosti.malkki@gmail.com>2018-05-24 00:04:22 +0300
committerKyösti Mälkki <kyosti.malkki@gmail.com>2018-05-31 03:41:11 +0000
commit1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch)
treebf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard/msi/ms9185
parentf054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff)
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/msi/ms9185')
-rw-r--r--src/mainboard/msi/ms9185/Kconfig62
-rw-r--r--src/mainboard/msi/ms9185/Kconfig.name2
-rw-r--r--src/mainboard/msi/ms9185/board_info.txt4
-rw-r--r--src/mainboard/msi/ms9185/cmos.layout52
-rw-r--r--src/mainboard/msi/ms9185/devicetree.cb85
-rw-r--r--src/mainboard/msi/ms9185/get_bus_conf.c130
-rw-r--r--src/mainboard/msi/ms9185/irq_tables.c118
-rw-r--r--src/mainboard/msi/ms9185/mb_sysconf.h33
-rw-r--r--src/mainboard/msi/ms9185/mptable.c161
-rw-r--r--src/mainboard/msi/ms9185/resourcemap.c286
-rw-r--r--src/mainboard/msi/ms9185/romstage.c176
11 files changed, 0 insertions, 1109 deletions
diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig
deleted file mode 100644
index 355fdcfa35..0000000000
--- a/src/mainboard/msi/ms9185/Kconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-if BOARD_MSI_MS9185
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SOCKET_F
- select DIMM_DDR2
- select DIMM_REGISTERED
- select NORTHBRIDGE_AMD_AMDK8
- select SOUTHBRIDGE_BROADCOM_BCM5780
- select SOUTHBRIDGE_BROADCOM_BCM5785
- select HT_CHAIN_DISTRIBUTE
- select SUPERIO_NSC_PC87417
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select LIFT_BSP_APIC_ID
- select BOARD_ROMSIZE_KB_512
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select QRANK_DIMM_SUPPORT
- select SET_FIDVID
-
-config MAINBOARD_DIR
- string
- default msi/ms9185
-
-config DCACHE_RAM_BASE
- hex
- default 0xcc000
-
-config DCACHE_RAM_SIZE
- hex
- default 0x04000
-
-config APIC_ID_OFFSET
- hex
- default 0x8
-
-config MAINBOARD_PART_NUMBER
- string
- default "MS-9185"
-
-config MAX_CPUS
- int
- default 4
-
-config MAX_PHYSICAL_CPUS
- int
- default 2
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x1
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0x6
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-endif # BOARD_MSI_MS9185
diff --git a/src/mainboard/msi/ms9185/Kconfig.name b/src/mainboard/msi/ms9185/Kconfig.name
deleted file mode 100644
index 00594c059d..0000000000
--- a/src/mainboard/msi/ms9185/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_MSI_MS9185
- bool "MS-9185 (K9SD Master-S2R)"
diff --git a/src/mainboard/msi/ms9185/board_info.txt b/src/mainboard/msi/ms9185/board_info.txt
deleted file mode 100644
index e5081f9922..0000000000
--- a/src/mainboard/msi/ms9185/board_info.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Board name: K9SD Master-S2R (MS-9185)
-Category: server
-Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_9185.aspx
-Release year: 2006
diff --git a/src/mainboard/msi/ms9185/cmos.layout b/src/mainboard/msi/ms9185/cmos.layout
deleted file mode 100644
index e42037e1a1..0000000000
--- a/src/mainboard/msi/ms9185/cmos.layout
+++ /dev/null
@@ -1,52 +0,0 @@
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#392 3 r 0 unused
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 5 Notice
-6 6 Info
-6 7 Debug
-6 8 Spew
-8 0 400Mhz
-8 1 333Mhz
-8 2 266Mhz
-8 3 200Mhz
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb
deleted file mode 100644
index 3c9168d2ee..0000000000
--- a/src/mainboard/msi/ms9185/devicetree.cb
+++ /dev/null
@@ -1,85 +0,0 @@
-chip northbridge/amd/amdk8/root_complex
- device cpu_cluster 0 on
- chip cpu/amd/socket_F
- device lapic 0 on end
- end
- end
- device domain 0 on
- subsystemid 0x1022 0x2b80 inherit
- chip northbridge/amd/amdk8
- device pci 18.0 on end
- device pci 18.0 on end
- device pci 18.0 on # northbridge
- # devices on link 0
- chip southbridge/broadcom/bcm5780 # HT2000
- device pci 0.0 on end # PXB 1 0x0130
- device pci 1.0 on # PXB 2 0x0130
- device pci 4.0 on end # GB E 0x1668 vid = 0x14e4
- device pci 4.1 on end # GB E 0x1669 vid = 0x14e4
- end
- device pci 2.0 on end # PCI E 1 #0x0132
- device pci 3.0 on end # PCI E 2
- device pci 4.0 on end # PCI E 3
- device pci 5.0 on end # PCI E 4
- end
- chip southbridge/broadcom/bcm5785 # HT1000
- device pci 0.0 on # HT PXB 0x0036
- device pci d.0 on end # PPBX 0x0104
- device pci e.0 on end # SATA 0x024a
- device pci e.1 on end # SATA 0x024a bx_a001
- device pci e.2 on end # SATA 0x024a bx_a001
- device pci e.3 on end # SATA 0x024a bx_a001
- end
- device pci 1.0 on # Legacy pci main 0x0205
- end
- device pci 1.1 on end # IDE 0x0214
- device pci 1.2 on # LPC 0x0234
- chip superio/nsc/pc87417
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 off # Com 2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.3 on # Com 1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.4 off end # SWC
- device pnp 2e.5 off end # Mouse
- device pnp 2e.6 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end # GPIO
- device pnp 2e.f off end # XBUS
- device pnp 2e.10 on #RTC
- io 0x60 = 0x70
- io 0x62 = 0x72
- end
- end
- end
- device pci 1.3 on end # WDTimer 0x0238
- device pci 1.4 on end # XIOAPIC0 0x0235
- device pci 1.5 on end # XIOAPIC1
- device pci 1.6 on end # XIOAPIC2
- device pci 2.0 on end # USB 0x0223
- device pci 2.1 on end # USB
- device pci 2.2 on end # USB
- device pci 3.0 on end # it is in bcm5785_0 bus
- end
- end # device pci 18.0
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end # amdk8
- end #domain
-end
diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c
deleted file mode 100644
index d02f30687a..0000000000
--- a/src/mainboard/msi/ms9185/get_bus_conf.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-#include <stdlib.h>
-#include "mb_sysconf.h"
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-struct mb_sysconf_t mb_sysconf;
-
-static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
-};
-
-static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-};
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
-
- unsigned apicid_base;
-
- struct device *dev;
- int i;
- struct mb_sysconf_t *m;
-
- if (get_bus_conf_done == 1)
- return; //do it only once
-
- get_bus_conf_done = 1;
-
- sysconf.mb = &mb_sysconf;
-
- m = sysconf.mb;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
- m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780
-
- m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff;
- m->bus_bcm5780[0] = m->bus_bcm5785_0;
-
- /* bcm5785 */
- dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0));
- if (dev) {
- m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0));
- if (dev) {
- m->bus_bcm5785_1_1 =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
- m->bus_bcm5785_0, sysconf.sbdn);
- }
-
- /* bcm5780 */
- for (i = 1; i < 7; i++) {
- dev =
- dev_find_slot(m->bus_bcm5780[0],
- PCI_DEVFN(m->sbdn2 + i - 1, 0));
- if (dev) {
- m->bus_bcm5780[i] =
- pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:%02x.0, using defaults\n",
- m->bus_bcm5780[0], m->sbdn2 + i - 1);
- }
- }
-
-/*I/O APICs: APIC ID Version State Address*/
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
- apicid_base = get_apicid_base(3);
- else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
- for (i = 0; i < 3; i++)
- m->apicid_bcm5785[i] = apicid_base + i;
-}
diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c
deleted file mode 100644
index 65f82a2823..0000000000
--- a/src/mainboard/msi/ms9185/irq_tables.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-#include "mb_sysconf.h"
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
- uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2,
- uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
-
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
-
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
-
- uint8_t sum = 0;
- int i;
-
- struct mb_sysconf_t *m;
-
- get_bus_conf();
-
- m = sysconf.mb;
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *) (addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = m->bus_bcm5785_0;
- pirq->rtr_devfn = (sysconf.sbdn << 3) | 0;
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1166;
- pirq->rtr_device = 0x0036;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *)(&pirq->checksum + 1);
- slot_num = 0;
-//pci bridge
- write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn << 3) | 0,
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
- pirq_info++;
- slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "done.\n");
-
- return (unsigned long)pirq_info;
-
-}
diff --git a/src/mainboard/msi/ms9185/mb_sysconf.h b/src/mainboard/msi/ms9185/mb_sysconf.h
deleted file mode 100644
index 6944c2465c..0000000000
--- a/src/mainboard/msi/ms9185/mb_sysconf.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef MB_SYSCONF_H
-#define MB_SYSCONF_H
-
-struct mb_sysconf_t {
- unsigned char bus_bcm5780[7];
- unsigned char bus_bcm5785_0;
- unsigned char bus_bcm5785_1;
- unsigned char bus_bcm5785_1_1;
- unsigned apicid_bcm5785[3];
-
- unsigned sbdn2;
-};
-
-#endif
diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c
deleted file mode 100644
index ea7c905af0..0000000000
--- a/src/mainboard/msi/ms9185/mptable.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2001 Eric W.Biederman <ebiderman@lnxi.com>
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/io.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
-#include <cpu/amd/multicore.h>
-#endif
-#include <cpu/amd/amdk8_sysconf.h>
-#include "mb_sysconf.h"
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
-
- int i, bus_isa;
- struct mb_sysconf_t *m;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- get_bus_conf();
- m = sysconf.mb;
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
-/*I/O APICs: APIC ID Version State Address*/
- {
- struct device *dev = NULL;
- struct resource *res;
- for (i = 0; i < 3; i++) {
- dev = dev_find_device(0x1166, 0x0235, dev);
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11,
- res2mmio(res, 0, 0));
- }
- }
- }
-
- }
-
- mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0);
-
-//IDE
- outb(0x02, 0xc00); outb(0x0e, 0xc01);
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,
- m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE
-
-//SATA
- outb(0x07, 0xc00); outb(0x0f, 0xc01);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xf);
-
-//USB
- outb(0x01, 0xc00); outb(0x0a, 0xc01);
- for (i = 0; i < 3; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); //
-
-
-
- /* enable int */
- /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/
- {
- struct device *dev;
- dev = dev_find_device(0x1166, 0x0205, 0);
- if (dev) {
- uint32_t dword;
- dword = pci_read_config32(dev, 0x6c);
- dword |= (1 << 4); // enable interrupts
- pci_write_config32(dev, 0x6c, dword);
- }
- }
-
-//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0
- // AIC 8130 Galileo Technology...
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_1_1, (6 << 2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); //
-
-
-//pci slot (on bcm5785)
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_0, (5 << 2)|i, m->apicid_bcm5785[1], 8+i%4); //
-
-
-//onboard ati
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5785_0, (4 << 2)|0, m->apicid_bcm5785[1], 0x1);
-
-//PCI-X on bcm5780
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[1], (4 << 2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); //
-
-//onboard Broadcom
- for (i = 0; i < 2; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[2], (4 << 2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); //
-
-
-// First PCI-E x8
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[5], (0 << 2)|i, m->apicid_bcm5785[1], 0xe); //
-
-
-// Second PCI-E x8
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[3], (0 << 2)|i, m->apicid_bcm5785[1], 0xc); //
-
-// Third PCI-E x1
- for (i = 0; i < 4; i++)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- m->bus_bcm5780[4], (0 << 2)|i, m->apicid_bcm5785[1], 0xd); //
-
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, bus_isa);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c
deleted file mode 100644
index 533f31a49a..0000000000
--- a/src/mainboard/msi/ms9185/resourcemap.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de>
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * ms9185 needs a different resource map
- *
- */
-
-static void setup_ms9185_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
- };
-
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c
deleted file mode 100644
index d8cff07ff3..0000000000
--- a/src/mainboard/msi/ms9185/romstage.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 Tyan
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by bxshi <bingxunshi@gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/broadcom/bcm5785/early_smbus.c"
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include <reset.h>
-#include <cpu/x86/lapic.h>
-
-#include <superio/nsc/pc87417/pc87417.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
-#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
-
-unsigned get_sbdn(unsigned bus);
-
-void memreset(int controllers, const struct mem_controller *ctrl) { }
-
-void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_SWITCH1 0x70
-#define SMBUS_SWITCH2 0x72
- unsigned device = (ctrl->channel0[0]) >> 8;
- smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
- smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f );
-}
-
-int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "southbridge/broadcom/bcm5785/early_setup.c"
-#include <northbridge/amd/amdk8/f.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include <spd.h>
-#include "cpu/amd/model_fxx/init_cpus.c"
-#include "cpu/amd/model_fxx/fidvid.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-
-#define RC0 (0x10 << 8)
-#define RC1 (0x01 << 8)
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const uint16_t spd_addr[] = {
- //first node
- RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
- RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7,
- //second node
- RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
- RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
- };
-
- struct sys_info *sysinfo = &sysinfo_car;
-
- int needs_reset;
- unsigned bsp_apicid = 0;
-
- if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
- bcm5785_enable_lpc();
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
- }
-
- if (bist == 0)
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
-
- pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
-
- setup_ms9185_resource_map();
-
- printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
-
- setup_coherent_ht_domain();
-
- wait_all_core0_started();
-#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
- // It is said that we should start core1 after all core0 launched
- /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
- * So here need to make sure last core0 is started, esp for two way system,
- * (there may be apic id conflicts in that case)
- */
- start_other_cores();
-//bx_a010- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- /* it will set up chains and store link pair for optimization later */
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-
- bcm5785_early_setup();
-
-#if IS_ENABLED(CONFIG_SET_FIDVID)
- {
- msr_t msr;
- msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
- enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
- // show final fid and vid
- {
- msr_t msr;
- msr = rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo);
- }
-#endif
-
-#if 1
- needs_reset = optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
-
- // fidvid change will issue one LDTSTOP and the HT change will be effective too
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset();
- }
-#endif
- allow_all_aps_stop(bsp_apicid);
-
- //It's the time to set ctrl in sysinfo now;
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-
- enable_smbus();
-
- //do we need apci timer, tsc...., only debug need it for better output
- /* all ap stopped? */
-// init_timer(); // Need to use TMICT to synchronize FID/VID
-
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
-}