Kconfig!

Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 198 insertions, 0 deletions

diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig
new file mode 100644
index 0000000000..792d600548
--- /dev/null
+++ b/src/mainboard/lippert/Kconfig
@@ -0,0 +1 @@
+#
diff --git a/src/mainboard/lippert/frontrunner/devicetree.cb b/src/mainboard/lippert/frontrunner/devicetree.cb
new file mode 100644
index 0000000000..7f16174d60
--- /dev/null
+++ b/src/mainboard/lippert/frontrunner/devicetree.cb
@@ -0,0 +1,18 @@
+chip northbridge/amd/gx2
+  device pci_domain 0 on 
+    device pci 0.0 on end
+      chip southbridge/amd/cs5535
+        device pci 12.0 on
+        device pci 12.1 off end		# SMI
+        device pci 12.2 on  end		# IDE
+        device pci 12.3 off end 	# Audio
+        device pci 12.4 off end		# VGA
+      end
+    end
+  end
+
+  chip cpu/amd/model_gx2
+  end
+
+end
+
diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb
new file mode 100644
index 0000000000..72019728e0
--- /dev/null
+++ b/src/mainboard/lippert/roadrunner-lx/devicetree.cb
@@ -0,0 +1,89 @@
+chip northbridge/amd/lx
+  device pci_domain 0 on
+    device pci 1.0 on end		# Northbridge
+    device pci 1.1 on end		# Graphics
+    device pci 1.2 on end		# AES
+    chip southbridge/amd/cs5536		# Southbridge
+      # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
+      # SIRQ Mode = Active(Quiet) mode. Save power...
+      # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
+      # UARTs, etc IRQs. OK
+      register "lpc_serirq_enable"        = "0x000012DA"  # 00010010 11011010
+      register "lpc_serirq_polarity"      = "0x0000ED25"  # inverse of above
+      register "lpc_serirq_mode"          = "1"
+      register "enable_gpio_int_route"    = "0x0D0C0700"
+      register "enable_ide_nand_flash"    = "0"  # 0:ide mode, 1:flash
+      register "enable_USBP4_device"      = "0"  # 0: host, 1:device
+      register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+      register "com1_enable"              = "0"
+      register "com1_address"             = "0x3E8"
+      register "com1_irq"                 = "6"
+      register "com2_enable"              = "0"
+      register "com2_address"             = "0x2E8"
+      register "com2_irq"                 = "6"
+      register "unwanted_vpci[0]"         = "0"  # End of list has a zero
+      device pci 8.0 on end		# Slot4
+      device pci 9.0 on end		# Slot3
+      device pci a.0 on end		# Slot2
+      device pci b.0 on end		# Slot1
+      device pci c.0 on end		# IT8888
+      device pci e.0 on end		# Ethernet
+      device pci f.0 on			# ISA bridge
+        chip superio/ite/it8712f
+          device pnp 2e.0 off		# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 2e.1 on		# Com1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 2e.2 on		# Com2
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 2e.3 on		# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+          end
+          device pnp 2e.4 on		# EC
+            io 0x60 = 0x290
+            io 0x62 = 0x230
+            irq 0x70 = 9
+          end
+          device pnp 2e.5 on		# PS/2 keyboard
+            io 0x60 = 0x60
+            io 0x62 = 0x64
+            irq 0x70 = 1
+          end
+          device pnp 2e.6 on		# PS/2 mouse
+            irq 0x70 = 12
+          end
+          device pnp 2e.7 on		# GPIO
+            io 0x62 = 0x1220
+            # io 0x64 = 0x1200
+          end
+          device pnp 2e.8 off		# MIDI
+            io 0x60 = 0x300
+            irq 0x70 = 9
+          end
+          device pnp 2e.9 off		# Game port
+            io 0x60 = 0x220
+          end
+          device pnp 2e.a off end	# CIR
+        end
+      end
+      device pci f.2 on end		# IDE controller
+      device pci f.3 on end		# Audio
+      device pci f.4 on end		# OHCI
+      device pci f.5 on end		# EHCI
+    end
+  end
+  # APIC cluster is late CPU init.
+  device apic_cluster 0 on
+    chip cpu/amd/model_lx
+      device apic 0 on end
+    end
+  end
+end
diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb
new file mode 100644
index 0000000000..f6d5535e88
--- /dev/null
+++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb
@@ -0,0 +1,90 @@
+chip northbridge/amd/lx
+  device pci_domain 0 on
+    device pci 1.0 on end				# Northbridge
+    device pci 1.1 on end				# Graphics
+    device pci 1.2 on end				# AES
+    chip southbridge/amd/cs5536
+      # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
+      # SIRQ Mode = Active(Quiet) mode. Save power....
+      # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
+      # UARTs, etc IRQs. OK
+      register "lpc_serirq_enable"        = "0x000012DA" # 00010010 11011010
+      register "lpc_serirq_polarity"      = "0x0000ED25" # inverse of above
+      register "lpc_serirq_mode"          = "1"
+      register "enable_gpio_int_route"    = "0x0D0C0700"
+      register "enable_ide_nand_flash"    = "0" # 0:ide mode, 1:flash
+      register "enable_USBP4_device"      = "0" # 0:host, 1:device
+      register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+      register "com1_enable"              = "0"
+      register "com1_address"             = "0x3E8"
+      register "com1_irq"                 = "6"
+      register "com2_enable"              = "0"
+      register "com2_address"             = "0x2E8"
+      register "com2_irq"                 = "6"
+      register "unwanted_vpci[0]"         = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8
+      register "unwanted_vpci[1]"         = "0" # End of list has a zero
+      device pci 8.0 on end		# Slot4
+      device pci 9.0 on end		# Slot3
+      device pci a.0 on end		# Slot2
+      device pci b.0 on end		# Slot1
+      device pci c.0 on end		# IT8888
+      device pci e.0 on end		# Ethernet
+      device pci f.0 on			# ISA Bridge
+        chip superio/ite/it8712f
+          device pnp 2e.0 off		# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 2e.1 on		# Com1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 2e.2 on		# Com2
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 2e.3 on		# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+          end
+          device pnp 2e.4 on		# EC
+            io 0x60 = 0x290
+            io 0x62 = 0x230
+            irq 0x70 = 9
+          end
+          device pnp 2e.5 on		# PS/2 keyboard
+            io 0x60 = 0x60
+            io 0x62 = 0x64
+            irq 0x70 = 1
+          end
+          device pnp 2e.6 on		# PS/2 mouse
+            irq 0x70 = 12
+          end
+          device pnp 2e.7 on		# GPIO
+            io 0x62 = 0x1220
+            io 0x64 = 0x1200
+          end
+          device pnp 2e.8 off		# MIDI
+            io 0x60 = 0x300
+            irq 0x70 = 9
+          end
+          device pnp 2e.9 off		# Game port
+            io 0x60 = 0x220
+          end
+          device pnp 2e.a off end	# CIR
+        end
+      end
+      device pci f.2 on end		# IDE
+      device pci f.3 off end		# Audio
+      device pci f.4 on end		# OHCI
+      device pci f.5 on end		# EHCI
+    end
+  end
+  # APIC cluster is late CPU init.
+  device apic_cluster 0 on
+    chip cpu/amd/model_lx
+      device apic 0 on end
+    end
+  end
+end