AGESA fam14 boards: Clean up devicetree

Remove double nesting of chip northbridge/amd.
There is requirement to keep SPD address map in
the same chip block with device 0:18.2.

Change-Id: Ib212f24c3d697a009d2ca8e2c77220de4bfb7573
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30733
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 75 insertions, 75 deletions

diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb
index 2f742ffbb0..cb9aa8e668 100644
--- a/src/mainboard/lippert/toucan-af/devicetree.cb
+++ b/src/mainboard/lippert/toucan-af/devicetree.cb
@@ -14,84 +14,84 @@
 #
 chip northbridge/amd/agesa/family14/root_complex
 	device cpu_cluster 0 on
-			chip cpu/amd/agesa/family14
-				device lapic 0 on end
-			end
+		chip cpu/amd/agesa/family14
+			device lapic 0 on end
+		end
 	end
 	device domain 0 on
 		subsystemid 0x1022 0x1510 inherit
-			chip northbridge/amd/agesa/family14 # CPU side of HT root complex
-#					device pci 18.0 on #  northbridge
-					chip northbridge/amd/agesa/family14 # PCI side of HT root complex
-						device pci 0.0 on end # Root Complex
-						device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
-						#device pci 1.1 on end # Internal HDMI Audio
-						device pci 4.0 on end # PCIE P2P bridge
-						device pci 5.0 on end # PCIE P2P bridge
-						device pci 6.0 on end # PCIE P2P bridge
-						device pci 7.0 on end # PCIE P2P bridge on-board NIC
-						device pci 8.0 off end # NB/SB Link P2P bridge
-					end # agesa northbridge
+		chip northbridge/amd/agesa/family14
+			device pci 0.0 on end # Root Complex
+			device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
+			#device pci 1.1 on end # Internal HDMI Audio
+			device pci 4.0 on end # PCIE P2P bridge
+			device pci 5.0 on end # PCIE P2P bridge
+			device pci 6.0 on end # PCIE P2P bridge
+			device pci 7.0 on end # PCIE P2P bridge on-board NIC
+			device pci 8.0 off end # NB/SB Link P2P bridge
+		end # agesa northbridge
 
-					chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
-						device pci 11.0 on end # SATA
-						device pci 12.0 on end # OHCI USB 0-4
-						device pci 12.2 on end # EHCI USB 0-4
-						device pci 13.0 on end # OHCI USB 5-9
-						device pci 13.2 on end # EHCI USB 5-9
-						device pci 14.0 on # SM
-						chip drivers/generic/generic #dimm 0-0-0
-							device i2c 50 on end
-						end
-						chip drivers/generic/generic #dimm 0-0-1
-							device i2c 51 off end
-						end
-					end # SM
-					device pci 14.1 off end # IDE	0x439c
-					device pci 14.2 on end # HDA	0x4383
-					device pci 14.3 on # LPC		0x439d
-					chip superio/winbond/w83627dhg
-						device pnp 4e.0 off end		# Floppy
-						device pnp 4e.1 off end		# Parallel Port
-						device pnp 4e.2 on		# COM1
-							io 0x60 = 0x3f8
-							irq 0x70 = 4
-						end
-						device pnp 4e.3 on		# COM2
-							io 0x60 = 0x2f8
-							irq 0x70 = 3
-						end
-						device pnp 4e.5 on		# Keyboard, Mouse
-							io 0x60 = 0x60
-							io 0x62 = 0x64
-							irq 0x70 = 1
-							irq 0x72 = 12
-						end
-						#device pnp 4e.6 off end	# SPI
-						device pnp 4e.307 off end	# GPIO6
-						device pnp 4e.8 off end		# WDTO, PLED
-						device pnp 4e.009 off end	# GPIO2
-						device pnp 4e.109 off end	# GPIO3
-						device pnp 4e.209 off end	# GPIO4
-						device pnp 4e.309 off end	# GPIO5
-						device pnp 4e.A off end		# ACPI
-						device pnp 4e.B off end		# HW Monitor
-					end # w83627dhg
-				end #LPC
-				device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
-				device pci 14.5 off end # OHCI FS/LS USB
-				device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
-				device pci 15.0 on  end # PCIe PortA
-				device pci 15.1 on  end # PCIe PortB
-				device pci 15.2 on  end # PCIe PortC
-				device pci 15.3 on  end # PCIe PortD
-				device pci 16.0 off end # OHCI USB 10-13
-				device pci 16.2 off end # EHCI USB 10-13
-				register "gpp_configuration" = "4" #1:1:1:1
-				register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
-			end	#southbridge/amd/cimx/sb800
-#			end #  device pci 18.0
-# These seem unnecessary
+		chip southbridge/amd/cimx/sb800
+			device pci 11.0 on end # SATA
+			device pci 12.0 on end # OHCI USB 0-4
+			device pci 12.2 on end # EHCI USB 0-4
+			device pci 13.0 on end # OHCI USB 5-9
+			device pci 13.2 on end # EHCI USB 5-9
+			device pci 14.0 on # SM
+				chip drivers/generic/generic #dimm 0-0-0
+					device i2c 50 on end
+				end
+				chip drivers/generic/generic #dimm 0-0-1
+					device i2c 51 off end
+				end
+			end # SM
+			device pci 14.1 off end # IDE	0x439c
+			device pci 14.2 on end # HDA	0x4383
+			device pci 14.3 on # LPC		0x439d
+				chip superio/winbond/w83627dhg
+					device pnp 4e.0 off end		# Floppy
+					device pnp 4e.1 off end		# Parallel Port
+					device pnp 4e.2 on		# COM1
+						io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 4e.3 on		# COM2
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 4e.5 on		# Keyboard, Mouse
+						io 0x60 = 0x60
+						io 0x62 = 0x64
+						irq 0x70 = 1
+						irq 0x72 = 12
+					end
+					#device pnp 4e.6 off end	# SPI
+					device pnp 4e.307 off end	# GPIO6
+					device pnp 4e.8 off end		# WDTO, PLED
+					device pnp 4e.009 off end	# GPIO2
+					device pnp 4e.109 off end	# GPIO3
+					device pnp 4e.209 off end	# GPIO4
+					device pnp 4e.309 off end	# GPIO5
+					device pnp 4e.A off end		# ACPI
+					device pnp 4e.B off end		# HW Monitor
+				end # w83627dhg
+			end #LPC
+			device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
+			device pci 14.5 off end # OHCI FS/LS USB
+			device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
+			device pci 15.0 on  end # PCIe PortA
+			device pci 15.1 on  end # PCIe PortB
+			device pci 15.2 on  end # PCIe PortC
+			device pci 15.3 on  end # PCIe PortD
+			device pci 16.0 off end # OHCI USB 10-13
+			device pci 16.2 off end # EHCI USB 10-13
+			register "gpp_configuration" = "4" #1:1:1:1
+			register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
+		end	#southbridge/amd/cimx/sb800
+
+		chip northbridge/amd/agesa/family14
+
+			# These seem unnecessary
 			device pci 18.0 on end
 			device pci 18.1 on end
 			device pci 18.2 on end
@@ -106,7 +106,7 @@ chip northbridge/amd/agesa/family14/root_complex
 				{ {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
 				{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
 			}"
+		end # agesa northbridge
 
-		end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
 	end #domain
 end #northbridge/amd/agesa/family14/root_complex