* clean up all but two warnings on artecgroup dbe61

* integrate vsm init into normal x86.c code (so it can run above 1M)
* call void main(unsigned long bist) except void cache_as_ram_main(void)
  on Geode LX (as we do on almost all other platforms now)
* Unify Geode LX MSR setup (will bring most non-working LX targets back
  to life)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 5 insertions, 34 deletions

diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index efaf1dd6be..8aedd6380e 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -60,39 +60,7 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
 #include "lib/generic_sdram.c"
 #include "cpu/amd/model_lx/cpureginit.c"
 #include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
-	msr_t msr;
-
-	/* Setup access to the cache for under 1MB. */
-	msr.hi = 0x24fffc02;
-	msr.lo = 0x1000A000;	/* 0-A0000 write back */
-	wrmsr(CPU_RCONF_DEFAULT, msr);
-
-	msr.hi = 0x0;		/* Write back */
-	msr.lo = 0x0;
-	wrmsr(CPU_RCONF_A0_BF, msr);
-	wrmsr(CPU_RCONF_C0_DF, msr);
-	wrmsr(CPU_RCONF_E0_FF, msr);
-
-	/* Setup access to the cache for under 640K. Note MC not setup yet. */
-	msr.hi = 0x20000000;
-	msr.lo = 0xfff80;
-	wrmsr(MSR_GLIU0 + 0x20, msr);
-
-	msr.hi = 0x20000000;
-	msr.lo = 0x80fffe0;
-	wrmsr(MSR_GLIU0 + 0x21, msr);
-
-	msr.hi = 0x20000000;
-	msr.lo = 0xfff80;
-	wrmsr(MSR_GLIU1 + 0x20, msr);
-
-	msr.hi = 0x20000000;
-	msr.lo = 0x80fffe0;
-	wrmsr(MSR_GLIU1 + 0x21, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
 
 static const u16 sio_init_table[] = {	// hi=data, lo=index
 	0x0707,		// select LDN 7 (GPIO, SPI, watchdog, ...)
@@ -128,7 +96,7 @@ static void mb_gpio_init(void)
 	it8712f_exit_conf();
 }
 
-void cache_as_ram_main(void)
+void main(unsigned long bist)
 {
 	post_code(0x01);
 
@@ -150,6 +118,9 @@ void cache_as_ram_main(void)
 	uart_init();
 	console_init();
 
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
 	pll_reset(ManualConf);
 
 	cpuRegInit();