amd/geode_lx: Remove most boards

There is active work to convert remaining two boards,
PC Engines alix1c and alix2d, to EARLY_CBMEM_INIT.

Change-Id: I87e3963af7ef719e9fa2a8b0df34a896265905f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 0 insertions, 87 deletions

diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c
deleted file mode 100644
index 11f9e1420a..0000000000
--- a/src/mainboard/lippert/literunner-lx/mainboard.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 LiPPERT Embedded Computers GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/* Based on mainboard.c from the SpaceRunner-LX mainboard. */
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <arch/io.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-
-/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */
-#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485)
-	#define SIO_GP1X_CONFIG 0x07
-#else
-	#define SIO_GP1X_CONFIG 0x01
-#endif
-
-/* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */
-#define SIO_GP2X_CONFIG 0x00
-
-static const u16 ec_init_table[] = { /* hi = data, lo = index */
-	0x1900,		/* Enable monitoring */
-	0x3050,		/* VIN4,5 enabled */
-	0x0351,		/* TMPIN1,2 diode mode, TMPIN3 off */
-	0x805C,		/* Unlock zero adjust */
-	0x7056, 0x3C57,	/* Zero adjust TMPIN1,2 */
-	0x005C,		/* Lock zero adjust */
-	0xD014		/* Also set FAN_CTL polarity to Active High */
-};
-
-static void init(struct device *dev)
-{
-	unsigned int gpio_base, i;
-	printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX ENTER %s\n", __func__);
-
-	/* Init CS5536 GPIOs */
-	gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD,
-		    PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1;
-
-	outl(0x00000040, gpio_base + 0x00); // GPIO6  value      1 - LAN_PD#
-	outl(0x00000040, gpio_base + 0x04); // GPIO6  output     1 - LAN_PD#
-	outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up    0 - THRM_ALRM#
-	outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1    1 - THRM_ALRM#
-	outl(0x00000400, gpio_base + 0x20); // GPIO10 input      1 - THRM_ALRM#
-	outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2   1 - 32kHz
-	outl(0x00000800, gpio_base + 0x84); // GPIO27 output     1 - 32kHz
-	outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up    0 - 32kHz
-
-	/* Init Environment Controller. */
-	for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) {
-		u16 val = ec_init_table[i];
-		outb((u8)val, 0x0295);
-		outb(val >> 8, 0x0296);
-	}
-
-	/* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */
-	outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */
-	/* bit1 = COM3_RX_EN, bit0 = COM3_TX_EN */
-	outb(SIO_GP2X_CONFIG, 0x1221); /* Simple-I/O GP27-20 */
-
-	printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX EXIT %s\n", __func__);
-}
-
-static void mainboard_enable(struct device *dev)
-{
-	dev->ops->init = init;
-}
-
-struct chip_operations mainboard_ops = {
-	.enable_dev = mainboard_enable,
-};