diff options
| author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-06-04 06:49:00 +0300 |
|---|---|---|
| committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-06-05 12:44:12 +0000 |
| commit | 64aa881263fa3fdec827a3f7adf04b138ab82ff1 (patch) | |
| tree | f23ae6c0868089cc443d12cec2618f471c0efe77 /src/mainboard/lippert/hurricane-lx/Kconfig | |
| parent | 88af0f38eb19f956e8df2b62254c10c7603a9a33 (diff) | |
amd/geode_lx: Remove most boards
There is active work to convert remaining two boards,
PC Engines alix1c and alix2d, to EARLY_CBMEM_INIT.
Change-Id: I87e3963af7ef719e9fa2a8b0df34a896265905f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/mainboard/lippert/hurricane-lx/Kconfig')
| -rw-r--r-- | src/mainboard/lippert/hurricane-lx/Kconfig | 56 |
1 files changed, 0 insertions, 56 deletions
diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig deleted file mode 100644 index 04c22201c6..0000000000 --- a/src/mainboard/lippert/hurricane-lx/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -if BOARD_LIPPERT_HURRICANE_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - select POWER_BUTTON_FORCE_ENABLE if !BOARD_OLD_REVISION - -config MAINBOARD_DIR - string - default lippert/hurricane-lx - -config MAINBOARD_PART_NUMBER - string - default "Hurricane-LX" - -config IRQ_SLOT_COUNT - int - default 8 - -config BOARD_OLD_REVISION - bool "Board is old pre-3.0 revision" - default n - select POWER_BUTTON_DEFAULT_DISABLE - help - Look on the bottom side for a number like 406-0001-30. The last 2 - digits state the PCB revision (3.0 in this example). For 2.0 or older - boards choose Y, for 3.0 and newer say N. - - Old revision boards need a jumper shorting the power button to - power on automatically. You may enable the button only after this - jumper has been removed. New revision boards are not restricted - in this way, and always have the power button enabled. - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_HURRICANE_LX |