diff options
| author | Peter Stuge <peter@stuge.se> | 2010-10-13 06:23:02 +0000 |
|---|---|---|
| committer | Peter Stuge <peter@stuge.se> | 2010-10-13 06:23:02 +0000 |
| commit | 51eafdeae621f1b04db51c3b4a690fa993aa48a0 (patch) | |
| tree | e36ad669d05eecf00ce5826f8fb3fad8409ebec7 /src/mainboard/lippert/hurricane-lx/Kconfig | |
| parent | f2573bd23727db672b22f3840ce91d08ec3aea5d (diff) | |
Enable or disable the power button in Kconfig
Some mainboards need to disable the power button to avoid turning off
right after being turned on, while other boards ship with a jumper over
the power button and should allow the user to configure the behavior.
This adds infrastructure in the form of four mutually exclusive options
which can be selected in a mainboard Kconfig (power button forced on/off,
and user-controllable with default on/off) and one result bool which
source code can test. (Enable the button or not.)
The options have been implemented in CS5536 code and for all mainboards
which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other
chipsets where applicable. Note that if chipset code uses the result
bool ENABLE_POWER_BUTTON, then every board using that chipset must
select one out of the four control options in order to build.
All touched boards should have unchanged behavior, except
pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the
power button can now be configured by the user.
Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed
to work as advertised on alix1c both with button enabled and disabled.
Includes additional traverse/geos changes from Nathan and
lippert/hurricane-lx changes from Jens to correctly use the new
feature on those boards.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/lippert/hurricane-lx/Kconfig')
| -rw-r--r-- | src/mainboard/lippert/hurricane-lx/Kconfig | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig index 027988f959..9b20aa0759 100644 --- a/src/mainboard/lippert/hurricane-lx/Kconfig +++ b/src/mainboard/lippert/hurricane-lx/Kconfig @@ -29,11 +29,20 @@ config IRQ_SLOT_COUNT config BOARD_OLD_REVISION bool "Board is old pre-3.0 revision" default n + select POWER_BUTTON_DEFAULT_DISABLE help Look on the bottom side for a number like 406-0001-30. The last 2 digits state the PCB revision (3.0 in this example). For 2.0 or older boards choose Y, for 3.0 and newer say N. + Old revision boards need a jumper shorting the power button to + power on automatically. You may enable the button only after this + jumper has been removed. New revision boards are not restricted + in this way, and always have the power button enabled. + +config POWER_BUTTON_FORCE_ENABLE + def_bool y if !BOARD_OLD_REVISION + config ONBOARD_UARTS_RS485 bool "Switch on-board serial ports to RS485" default n |