Add support for LiPPERT Hurricane-LX (EPIC board with AMD Geode-LX,

CS5536, ITE IT8712F).  Board support is based on the SpaceRunner-LX
(with tiny bits from the RoadRunner-LX) even though the hardware really
was the ancestor of our three other -LX boards and in fact among the
earliest Geode-LX boards on the market.  (Might even have been the first
Geode-LX EPIC?)

Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5801 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 45 insertions, 0 deletions

diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig
new file mode 100644
index 0000000000..b30b8bba45
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/Kconfig
@@ -0,0 +1,45 @@
+if BOARD_LIPPERT_HURRICANE_LX
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_LX
+	select NORTHBRIDGE_AMD_LX
+	select SOUTHBRIDGE_AMD_CS5536
+	select SUPERIO_ITE_IT8712F
+	select HAVE_PIRQ_TABLE
+	select PIRQ_ROUTE
+	select UDELAY_TSC
+	select CACHE_AS_RAM
+	# Board is equipped with a 1 MB SPI flash, however, due to limitations
+	# of the IT8712F Super I/O, only the top 512 KB are directly mapped.
+	select BOARD_ROMSIZE_KB_512
+
+config MAINBOARD_DIR
+	string
+	default lippert/hurricane-lx
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "Hurricane-LX"
+
+config IRQ_SLOT_COUNT
+	int
+	default 8
+
+config BOARD_OLD_REVISION
+	bool "Board is old pre-3.0 revision"
+	default n
+	help
+	  Look on the bottom side for a number like 406-0001-30.  The last 2
+	  digits state the PCB revision (3.0 in this example).  For 2.0 or older
+	  boards choose Y, for 3.0 and newer say N.
+
+config ONBOARD_UARTS_RS485
+	bool "Switch on-board serial ports to RS485"
+	default n
+	help
+	  If selected, both on-board serial ports will operate in RS485 mode
+	  instead of RS232.
+
+endif # BOARD_LIPPERT_HURRICANE_LX