LiPPERT FrontRunner-AF [2/2]: actually implement mainboard support

Step 2: change the Persimmon code to adapt it to the new board's hardware.

The FrontRunner-AF is a PC/104+ form factor embedded board:
- AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU
  - DDR3 SO-DIMM socket (1.5 or 1.35V)
  - VGA and LVDS (via Analogix ANX3110)
- AMD A55E (Hudson-E1) southbridge
  - 6x USB 2.0
  - 1x SATA, 1x CFast socket
  - HD Audio (via Realtek ALC886)
  - PCI and ISA (via ITE IT8888)
  - NEC uPD78F0532 microcontroller on I2C ("SEMA")
- Intel I210 GbE (on APU PCIe x1)
- SMSC SCH3112 SIO
  - PS/2
  - 2x RS232/485
- 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS)

http://www.adlinktech.com/PD/web/PD_detail.php?pid=1131

Change-Id: Id55f89d224ad669b351c36128b12299802b721ba
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-on: http://review.coreboot.org/2553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

13 files changed, 266 insertions, 172 deletions

diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c
index 9bad4f4490..89e2731b87 100644
--- a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c
+++ b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c
@@ -22,7 +22,6 @@
 #include "dimmSpd.h"
 #include "BiosCallOuts.h"
 #include "heapManager.h"
-#include "SB800.h"
 
 STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
@@ -445,9 +444,25 @@ AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPt
 /*	Call the host environment interface to provide a user hook opportunity. */
 AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 {
-	// Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage.
-	// Make sure the right speed settings are selected.
-	((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
+	MEM_DATA_STRUCT *MemData = ConfigPtr;
+
+	printk(BIOS_INFO, "Setting DDR3 voltage: ");
+	FCH_IOMUX(184) = 2; // GPIO184: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V
+	switch (MemData->ParameterListPtr->DDR3Voltage) {
+	case VOLT1_25: // board is not able to provide this
+		MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry
+		printk(BIOS_INFO, "can't provide 1.25 V, using ");
+		// fall through
+	default: // AGESA.h says in mixed case 1.5V DIMMs get excluded
+	case VOLT1_35:
+		FCH_GPIO(184) = 0x08; // = output, disable PU, set to 0
+		printk(BIOS_INFO, "1.35 V\n");
+		break;
+	case VOLT1_5:
+		FCH_GPIO(184) = 0xC8; // = output, disable PU, set to 1
+		printk(BIOS_INFO, "1.5 V\n");
+	}
+
 	return AGESA_SUCCESS;
 }
 
@@ -465,45 +480,6 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *Conf
 /* PCIE slot reset control */
 AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 {
-	AGESA_STATUS Status;
-	UINTN					FcnData;
-	PCIe_SLOT_RESET_INFO	*ResetInfo;
-
-	UINT32	GpioMmioAddr;
-	UINT32	AcpiMmioAddr;
-	UINT8	 Data8;
-	UINT16	Data16;
-
-	FcnData = Data;
-	ResetInfo = ConfigPtr;
-	// Get SB800 MMIO Base (AcpiMmioAddr)
-	WriteIo8(0xCD6, 0x27);
-	Data8 = ReadIo8(0xCD7);
-	Data16=Data8<<8;
-	WriteIo8(0xCD6, 0x26);
-	Data8 = ReadIo8(0xCD7);
-	Data16|=Data8;
-	AcpiMmioAddr = (UINT32)Data16 << 16;
-	Status = AGESA_UNSUPPORTED;
-	GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
-	switch (ResetInfo->ResetId)
-	{
-	case 46:	// GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot
-		switch (ResetInfo->ResetControl) {
-		case AssertSlotReset:
-			Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
-			Data8 &= ~(UINT8)BIT6 ;
-			Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8);
-			Status = AGESA_SUCCESS;
-			break;
-		case DeassertSlotReset:
-			Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
-			Data8 |= BIT6 ;
-			Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8);
-			Status = AGESA_SUCCESS;
-			break;
-		}
-		break;
-	}
-	return	Status;
+	// Dedicated reset not needed for the on-board Intel I210 GbE controller.
+	return AGESA_UNSUPPORTED;
 }
diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h
index c4f4f709d4..cd743f0ab9 100644
--- a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h
+++ b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.h
@@ -22,6 +22,7 @@
 
 #include "Porting.h"
 #include "AGESA.h"
+#include "SB800.h"
 
 #define BIOS_HEAP_START_ADDRESS			0x10000 /* HEAP during cold boot */
 #define BIOS_HEAP_SIZE				0x20000
@@ -70,4 +71,12 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *Conf
 /* PCIE slot reset control */
 AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
 
+/* FCH GPIO access helpers */
+#define FCH_IOMUX(gpio_nr) (*(u8*)(ACPI_MMIO_BASE+IOMUX_BASE+(gpio_nr)))
+#define FCH_GPIO(gpio_nr) (*(volatile u8*)(ACPI_MMIO_BASE+GPIO_BASE+(gpio_nr)))
+static inline u8 fch_gpio_state(unsigned int gpio_nr)
+{
+	return FCH_GPIO(gpio_nr) >> 7;
+}
+
 #endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig
index f3f9aa964a..0cdf3657e2 100644
--- a/src/mainboard/lippert/frontrunner-af/Kconfig
+++ b/src/mainboard/lippert/frontrunner-af/Kconfig
@@ -17,7 +17,7 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 #
 
-if BOARD_AMD_PERSIMMON
+if BOARD_LIPPERT_FRONTRUNNER_AF
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
@@ -26,11 +26,15 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
 	select NORTHBRIDGE_AMD_AGESA_FAMILY14
 	select SOUTHBRIDGE_AMD_CIMX_SB800
-	select SUPERIO_FINTEK_F81865F
+	select SUPERIO_SMSC_SMSCSUPERIO
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_ACPI_RESUME
+	# S3 doesn't work yet, heapManager.c:576 failed last time I tried,
+	# couldn't figure out why.  But s3_resume.c (look for "spi_flash_probe")
+	# erases 28 KB and writes 10 KB register dumps to SPI flash on every
+	# boot, wasting 3 s and causing wear!  Therefore disable S3 for now.
+	#select HAVE_ACPI_RESUME
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
@@ -42,7 +46,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 
 config MAINBOARD_DIR
 	string
-	default amd/persimmon
+	default lippert/frontrunner-af
 
 config APIC_ID_OFFSET
 	hex
@@ -50,7 +54,7 @@ config APIC_ID_OFFSET
 
 config MAINBOARD_PART_NUMBER
 	string
-	default "Persimmon"
+	default "FrontRunner-AF"
 
 config HW_MEM_HOLE_SIZEK
 	hex
@@ -58,7 +62,8 @@ config HW_MEM_HOLE_SIZEK
 
 config MAX_CPUS
 	int
-	default 2
+	default 1 if FUSION_G_T40R
+	default 2 if FUSION_G_T56N
 
 config MAX_PHYSICAL_CPUS
 	int
@@ -111,7 +116,8 @@ config VGA_BIOS
 
 config VGA_BIOS_ID
 	string
-	default "1002,9802"
+	default "1002,9804" if FUSION_G_T40R
+	default "1002,9806" if FUSION_G_T56N
 
 config SB800_AHCI_ROM
 	bool
@@ -121,4 +127,4 @@ config DRIVERS_PS2_KEYBOARD
 	bool
 	default n
 
-endif # BOARD_AMD_PERSIMMON
+endif # BOARD_LIPPERT_FRONTRUNNER_AF
diff --git a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c
index 14839c7f24..e9e482d1d6 100644
--- a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c
+++ b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c
@@ -60,19 +60,19 @@ PCIe_PORT_DESCRIPTOR PortList [] = {
 		{
 			0, //Descriptor flags	!!!IMPORTANT!!! Terminate last element of array
 			PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
-			PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46)
+			PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0)
 		},
 		// Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
 		{
 			0, //Descriptor flags	!!!IMPORTANT!!! Terminate last element of array
 			PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
-			PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46)
+			PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0)
 		},
 		// Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
 		{
 			0, //Descriptor flags	!!!IMPORTANT!!! Terminate last element of array
 			PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
-			PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46)
+			PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0)
 		},
 		// Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
 		{
@@ -94,7 +94,7 @@ PCIe_DDI_DESCRIPTOR DdiList [] = {
 			0,	 //Descriptor flags
 			PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
 			//PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
-			{ConnectorTypeLvds, Aux1, Hdp1}
+			{ConnectorTypeTravisDpToLvds, Aux1, Hdp1}
 		},
 		// Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
 		{
diff --git a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h
index ec8a6e3648..02c7f4ed1a 100644
--- a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h
+++ b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h
@@ -34,7 +34,7 @@
 #define GNB_GPP_PORT4_HOTPLUG_SUPPORT	0	//0:Disable 1:Basic 3:Enhanced
 
 //GNB GPP Port5
-#define GNB_GPP_PORT5_PORT_PRESENT		1	//0:Disable 1:Enable
+#define GNB_GPP_PORT5_PORT_PRESENT		0	//0:Disable 1:Enable
 #define GNB_GPP_PORT5_SPEED_MODE		2	//0:Auto 1:GEN1 2:GEN2
 #define GNB_GPP_PORT5_LINK_ASPM			3	//0:Disable 1:L0s 2:L1 3:L0s+L1
 #define GNB_GPP_PORT5_CHANNEL_TYPE		4	//0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
@@ -42,7 +42,7 @@
 #define GNB_GPP_PORT5_HOTPLUG_SUPPORT	0	//0:Disable 1:Basic 3:Enhanced
 
 //GNB GPP Port6
-#define GNB_GPP_PORT6_PORT_PRESENT		1	//0:Disable 1:Enable
+#define GNB_GPP_PORT6_PORT_PRESENT		0	//0:Disable 1:Enable
 #define GNB_GPP_PORT6_SPEED_MODE		2	//0:Auto 1:GEN1 2:GEN2
 #define GNB_GPP_PORT6_LINK_ASPM			3	//0:Disable 1:L0s 2:L1 3:L0s+L1
 #define GNB_GPP_PORT6_CHANNEL_TYPE		4	//0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
diff --git a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl
index 7a871da047..b894719854 100644
--- a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl
+++ b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl
@@ -390,18 +390,22 @@ Scope(\_SB) {
 	})
 
 	Name(PCIB, Package(){
-		/* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
-		Package(){0x0003FFFF, 0, 0, 0x14 },
-		Package(){0x0003FFFF, 1, 0, 0x15 },
-		Package(){0x0003FFFF, 2, 0, 0x16 },
-		Package(){0x0003FFFF, 3, 0, 0x17 },
-		Package(){0x0004FFFF, 0, 0, 0x15 },
-		Package(){0x0004FFFF, 1, 0, 0x16 },
-		Package(){0x0004FFFF, 2, 0, 0x17 },
-		Package(){0x0004FFFF, 3, 0, 0x14 },
-		Package(){0x0005FFFF, 0, 0, 0x16 },
-		Package(){0x0005FFFF, 1, 0, 0x17 },
-		Package(){0x0005FFFF, 2, 0, 0x14 },
-		Package(){0x0005FFFF, 3, 0, 0x15 },
+		/* PCI slots: slot 0, slot 1, slot 2, slot 3 behind Dev14, Fun4. */
+		Package(){0x0004FFFF, 0, 0, 0x14 },
+		Package(){0x0004FFFF, 1, 0, 0x15 },
+		Package(){0x0004FFFF, 2, 0, 0x16 },
+		Package(){0x0004FFFF, 3, 0, 0x17 },
+		Package(){0x0005FFFF, 0, 0, 0x15 },
+		Package(){0x0005FFFF, 1, 0, 0x16 },
+		Package(){0x0005FFFF, 2, 0, 0x17 },
+		Package(){0x0005FFFF, 3, 0, 0x14 },
+		Package(){0x0006FFFF, 0, 0, 0x16 },
+		Package(){0x0006FFFF, 1, 0, 0x17 },
+		Package(){0x0006FFFF, 2, 0, 0x14 },
+		Package(){0x0006FFFF, 3, 0, 0x15 },
+		Package(){0x0007FFFF, 0, 0, 0x17 },
+		Package(){0x0007FFFF, 1, 0, 0x14 },
+		Package(){0x0007FFFF, 2, 0, 0x15 },
+		Package(){0x0007FFFF, 3, 0, 0x16 },
 	})
 }
diff --git a/src/mainboard/lippert/frontrunner-af/acpi/superio.asl b/src/mainboard/lippert/frontrunner-af/acpi/superio.asl
new file mode 100644
index 0000000000..9be7492f3b
--- /dev/null
+++ b/src/mainboard/lippert/frontrunner-af/acpi/superio.asl
@@ -0,0 +1,39 @@
+/*
+ * SuperI/O devices
+ *
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH
+ * (Written by Jens Rottmann <JRottmann@LiPPERTembedded.de> for LiPPERT)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* PS/2 Keyboard */
+Device(KBC) {
+	Name(_HID, EISAID("PNP0303"))
+	Name(_CRS, ResourceTemplate() {
+		IO(Decode16, 0x0060, 0x0060, 1, 1)
+		IO(Decode16, 0x0064, 0x0064, 1, 1)
+		IRQNoFlags(){1}
+	})
+}
+
+/* PS/2 Mouse */
+Device(PS2M) {
+	Name(_HID, EISAID("PNP0F13"))
+	Name(_CRS, ResourceTemplate() {
+		IRQNoFlags(){12}
+	})
+}
diff --git a/src/mainboard/lippert/frontrunner-af/buildOpts.c b/src/mainboard/lippert/frontrunner-af/buildOpts.c
index c6383a231e..45ffac6413 100644
--- a/src/mainboard/lippert/frontrunner-af/buildOpts.c
+++ b/src/mainboard/lippert/frontrunner-af/buildOpts.c
@@ -385,6 +385,7 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 	//			Byte6Seed, Byte7Seed, ByteEccSeed)
 	//			Specifies the write leveling seed for a channel of a socket.
 	//
+	HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B),
 	NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
 	NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
 	PSO_END
diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb
index d108a11e5d..3a051aa87a 100644
--- a/src/mainboard/lippert/frontrunner-af/devicetree.cb
+++ b/src/mainboard/lippert/frontrunner-af/devicetree.cb
@@ -31,7 +31,7 @@ chip northbridge/amd/agesa/family14/root_complex
 						device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
 						device pci 4.0 on end # PCIE P2P bridge on-board NIC
 						device pci 5.0 off end # PCIE P2P bridge
-						device pci 6.0 on end # PCIE P2P bridge PCIe slot
+						device pci 6.0 off end # PCIE P2P bridge
 						device pci 7.0 off end # PCIE P2P bridge
 						device pci 8.0 off end # NB/SB Link P2P bridge
 					end # agesa northbridge
@@ -47,36 +47,34 @@ chip northbridge/amd/agesa/family14/root_complex
 							device i2c 50 on end
 						end
 						chip drivers/generic/generic #dimm 0-0-1
-							device i2c 51 on end
+							device i2c 51 off end
 						end
 					end # SM
-					device pci 14.1 on end # IDE	0x439c
+					device pci 14.1 off end # IDE	0x439c
 					device pci 14.2 on end # HDA	0x4383
 					device pci 14.3 on # LPC		0x439d
-					chip superio/fintek/f81865f
-						device pnp 4e.0 off		# Floppy
-							io 0x60 = 0x3f0
-							irq 0x70 = 6
-							drq 0x74 = 2
-						end
-						device pnp 4e.3 off end			# Parallel Port
-						device pnp 4e.4 off end			# Hardware Monitor
-						device pnp 4e.5 on #  Keyboard
-							io 0x60 = 0x60
-							io 0x62 = 0x64
-							irq 0x70 = 1
-						end
-						device pnp 4e.6 off end			# GPIO
-						device pnp 4e.a off end			# PME
-						device pnp 4e.10 on			# COM1
+					chip superio/smsc/smscsuperio
+						device pnp 4e.0 off end		# Floppy
+						device pnp 4e.3 off end		# Parallel Port
+						device pnp 4e.4 on		# COM1
 							io 0x60 = 0x3f8
 							irq 0x70 = 4
 						end
-						device pnp 4e.11 on			# COM2
+						device pnp 4e.5 on		# COM2
 							io 0x60 = 0x2f8
 							irq 0x70 = 3
 						end
-					end # f81865f
+						device pnp 4e.7 on		# Keyboard
+							io 0x60 = 0x60
+							io 0x62 = 0x64
+							irq 0x70 = 1
+							irq 0x72 = 12
+						end
+						device pnp 4e.A on		# Runtime Regs
+							io 0x60 = 0x0E00
+							drq 0xF0 = 0x0B # no 32kHz
+						end
+					end # smscsuperio
 				end #LPC
 				device pci 14.4 on  end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
 				device pci 14.5 off end # OHCI FS/LS USB
@@ -85,59 +83,10 @@ chip northbridge/amd/agesa/family14/root_complex
 				device pci 15.1 off end # PCIe PortB
 				device pci 15.2 off end # PCIe PortC
 				device pci 15.3 off end # PCIe PortD
-				device pci 16.0 off end # OHCI USB 10-13
-				device pci 16.2 off end # EHCI USB 10-13
-				register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+				device pci 16.0 on  end # OHCI USB 10-13
+				device pci 16.2 on  end # EHCI USB 10-13
+				register "gpp_configuration" = "4" #1:1:1:1
 				register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
-
-				#set up SB800 Fan control registers and IMC fan controls
-				register "imc_port_address" = "0x6E"	# 0x2E and 0x6E are common
-				register "fan0_enabled" = "1"
-				register "fan1_enabled" = "1"
-				register "imc_fan_zone0_enabled" = "1"
-				register "imc_fan_zone1_enabled" = "1"
-
-				register "fan0_config_vals" = "{ \
-					FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
-					FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\
-					0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
-				register "fan1_config_vals" = "{ \
-					FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
-					FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \
-					0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
-
-				register "imc_zone0_mode1" = " \
-					IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
-					IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0"
-				register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
-					IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
-				register "imc_zone0_temp_offset" = "0x00"	# No temp offset
-				register "imc_zone0_hysteresis" = "0x05"	# Degrees C Hysteresis
-				register "imc_zone0_smbus_addr" = "0x98"	# Temp Sensor SMBus address
-				register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3"	# SMBUS number
-				register "imc_zone0_pwm_step" = "0x01"		# Fan PWM stepping rate
-				register "imc_zone0_ramping" = "0x00"		# Disable Fan PWM ramping and stepping
-
-				register "imc_zone1_mode1" = " \
-					IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
-					IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1"
-				register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
-					IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
-				register "imc_zone1_temp_offset" = "0x00"	# No temp offset
-				register "imc_zone1_hysteresis" = "0x05"	# Degrees C Hysteresis
-				register "imc_zone1_smbus_addr" = "0x98"	# Temp Sensor SMBus address
-				register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3"	# SMBUS number
-				register "imc_zone1_pwm_step" = "0x01"		# Fan PWM stepping rate
-				register "imc_zone1_ramping" = "0x00"		# Disable Fan PWM ramping and stepping
-
-				# T56N has a Maximum operating temperature  of 90C
-				# ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C
-				# ZONEX_FANSPEEDS - Fan speeds as a "percentage"
-				register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }"
-				register "imc_zone0_fanspeeds"  = "{100,  7,  5,  4,  3, 2, 0, 0 }"
-				register "imc_zone1_thresholds" = "{ 85, 80, 75, 65,  1, 0, 0, 0, 90 }"
-				register "imc_zone1_fanspeeds"  = "{100, 10,  6,  4,  3, 0, 0, 0 }"
-
 			end	#southbridge/amd/cimx/sb800
 #			end #  device pci 18.0
 # These seem unnecessary
diff --git a/src/mainboard/lippert/frontrunner-af/dsdt.asl b/src/mainboard/lippert/frontrunner-af/dsdt.asl
index 582ab7fa64..d3b88f7762 100644
--- a/src/mainboard/lippert/frontrunner-af/dsdt.asl
+++ b/src/mainboard/lippert/frontrunner-af/dsdt.asl
@@ -1462,6 +1462,7 @@ DefinitionBlock (
 					}
 				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
 #endif
+				#include "acpi/superio.asl"
 			} /* end LIBR */
 
 			Device(HPBR) {
@@ -1477,6 +1478,8 @@ DefinitionBlock (
 			} /* end Ac97modem */
 
 			Name(CRES, ResourceTemplate() {
+				IO(Decode16, 0x004E, 0x004E, 1, 2)	/* SIO config regs */
+				IO(Decode16, 0x0E00, 0x0E00, 1, 0x80)	/* SIO runtime regs */
 				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
 
 				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c
index 99e1c306a2..83c90f391a 100644
--- a/src/mainboard/lippert/frontrunner-af/mainboard.c
+++ b/src/mainboard/lippert/frontrunner-af/mainboard.c
@@ -17,6 +17,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
+#include <stdlib.h>
 #include <console/console.h>
 #include <device/device.h>
 #include <device/pci.h>
@@ -29,6 +30,109 @@
 #include <cpu/amd/agesa/s3_resume.h>
 #include <cpu/amd/mtrr.h>
 #include "SBPLATFORM.h"
+#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
+
+/* Init SIO GPIOs. */
+#define SIO_RUNTIME_BASE 0x0E00
+static const u16 sio_init_table[] = { // hi=offset, lo=value
+	0x4BA0, // GP1x: COM1/2 control   = RS232, no term, max 115200
+	0x2300, // GP10: COM1 termination = push/pull output
+	0x2400, // GP11: COM2 termination = push/pull output
+	0x2500, // GP12: COM1 RS485 mode  = push/pull output
+	0x2600, // GP13: COM2 RS485 mode  = push/pull output
+	0x2700, // GP14: COM1 speed A     = push/pull output
+	0x2900, // GP15: COM1 speed B     = push/pull output
+	0x2A00, // GP16: COM2 speed A     = push/pull output
+	0x2B00, // GP17: COM2 speed B     = push/pull output
+
+	0x3904, // GP36                   = KBDRST# function
+
+	0x4E74, // GP4x: Ethernet enable  = on
+	0x6E84, // GP44: Ethernet enable  = open drain output
+
+	// GP5x = COM2 function instead of GPIO
+	0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604,
+
+	0x470C, // GP60                   = WDT function
+	0x5E00, // LED2: Live LED         = off
+	0x4884, // GP61: Live LED         = LED2 function
+
+	0x5038, // GP6x: USB power        = 3x on
+	0x5580, // GP63: USB power 0/1    = open drain output
+	0x5680, // GP64: USB power 2/3    = open drain output
+	0x5780, // GP65: USB power 4/5    = open drain output
+};
+
+/* Write data block to slave on SMBUS0. */
+#define SMB0_STATUS	((SMBUS0_BASE_ADDRESS) + 0)
+#define SMB0_CONTROL	((SMBUS0_BASE_ADDRESS) + 2)
+#define SMB0_HOSTCMD	((SMBUS0_BASE_ADDRESS) + 3)
+#define SMB0_ADDRESS	((SMBUS0_BASE_ADDRESS) + 4)
+#define SMB0_DATA0	((SMBUS0_BASE_ADDRESS) + 5)
+#define SMB0_BLOCKDATA	((SMBUS0_BASE_ADDRESS) + 7)
+static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)
+{
+	__outbyte(SMB0_STATUS, 0x1E);		// clear error status
+	__outbyte(SMB0_ADDRESS, slave & ~1);	// slave addr + direction=out
+	__outbyte(SMB0_HOSTCMD, command);	// or destination offset
+	__outbyte(SMB0_DATA0, length);		// sent before data
+	__inbyte(SMB0_CONTROL);			// reset block data array
+	while (length--)
+		__outbyte(SMB0_BLOCKDATA, *(data++));
+	__outbyte(SMB0_CONTROL, 0x54);		// execute block write, no IRQ
+
+	while (__inbyte(SMB0_STATUS) == 0x01) ;	// busy, no errors
+	return __inbyte(SMB0_STATUS) ^ 0x02;	// 0x02 = completed, no errors
+}
+
+static void init(struct device *dev)
+{
+	int i;
+	printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
+
+	/* Init Hudson GPIOs. */
+	printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
+	FCH_IOMUX( 50) = 2;    // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
+	FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed
+	FCH_IOMUX(197) = 2;    // GPIO197: BIOS_DEFAULTS# = input (int. PU)
+	FCH_IOMUX( 56) = 1;    // GPIO58-56: REV_ID2-0
+	FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups
+	FCH_IOMUX( 57) = 1;
+	FCH_GPIO ( 57) = 0x28;
+	FCH_IOMUX( 58) = 1;
+	FCH_GPIO ( 58) = 0x28;
+	FCH_IOMUX( 96) = 1;    // "Gpio96": GEVENT0# signal on X2 connector (int. PU)
+	FCH_IOMUX( 52) = 1;    // GPIO52,61,62,187-192 free to use on X2 connector
+	FCH_IOMUX( 61) = 2;    // default to inputs with int. PU
+	FCH_IOMUX( 62) = 2;
+	FCH_IOMUX(187) = 2;
+	FCH_IOMUX(188) = 2;
+	FCH_IOMUX(189) = 1;
+	FCH_IOMUX(190) = 1;
+	FCH_IOMUX(191) = 1;
+	FCH_IOMUX(192) = 1;
+	if (!fch_gpio_state(197)) // just in case anyone cares
+		printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
+	printk(BIOS_INFO, "Board revision ID: %u\n",
+	       fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
+
+	/* Init SIO GPIOs. */
+	printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RUNTIME_BASE);
+	for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) {
+		u16 val = sio_init_table[i];
+		outb((u8)val, SIO_RUNTIME_BASE + (val >> 8));
+	}
+
+	/* Notify the SMC we're alive and kicking, or after a while it will
+	 * effect a power cycle and switch to the alternate BIOS chip.
+	 * Should be done as late as possible. */
+	printk(BIOS_INFO, "Sending BIOS alive message\n");
+	const u8 i_am_alive[] = { 0x03 };
+	if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive)))
+		printk(BIOS_ERR, "smb_write_blk failed: %d\n", i);
+
+	printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__);
+}
 
 void set_pcie_reset(void);
 void set_pcie_dereset(void);
@@ -56,6 +160,7 @@ void set_pcie_dereset(void)
 static void mainboard_enable(device_t dev)
 {
 	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+	dev->ops->init = init;
 
 /*
  * The mainboard is the first place that we get control in ramstage. Check
@@ -65,10 +170,10 @@ static void mainboard_enable(device_t dev)
 	acpi_slp_type = acpi_get_sleep_type();
 #endif
 
-	/* enable GPP CLK0 thru CLK1 */
-	/* disable GPP CLK2 thru SLT_GFX_CLK */
+	/* enable GPP CLK0 */
+	/* disable GPP CLK1 thru SLT_GFX_CLK */
 	u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
-	*(misc_mem_clk_cntrl + 0) = 0xFF;
+	*(misc_mem_clk_cntrl + 0) = 0x0F;
 	*(misc_mem_clk_cntrl + 1) = 0x00;
 	*(misc_mem_clk_cntrl + 2) = 0x00;
 	*(misc_mem_clk_cntrl + 3) = 0x00;
diff --git a/src/mainboard/lippert/frontrunner-af/platform_cfg.h b/src/mainboard/lippert/frontrunner-af/platform_cfg.h
index b0ac180420..b94d3e3cea 100644
--- a/src/mainboard/lippert/frontrunner-af/platform_cfg.h
+++ b/src/mainboard/lippert/frontrunner-af/platform_cfg.h
@@ -77,7 +77,7 @@
  *  Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
  *  Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
  */
-#define USB_CONFIG		0x7F
+#define USB_CONFIG		0x3F
 
 /**
  * @def PCI_CLOCK_CTRL
@@ -90,7 +90,7 @@
  *  PCI SLOT 3 define at BIT3
  *  PCI SLOT 4 define at BIT4
  */
-#define PCI_CLOCK_CTRL			0x07
+#define PCI_CLOCK_CTRL			0x1F
 
 /**
  * @def SATA_CONTROLLER
@@ -180,13 +180,12 @@
  *  SDIN2 is define at BIT4 & BIT5
  *  SDIN3 is define at BIT6 & BIT7
  */
-//#define AZALIA_SDIN_PIN		0xAA
-#define AZALIA_SDIN_PIN			0x2A
+#define AZALIA_SDIN_PIN			0x02
 
 /**
  * @def GPP_CONTROLLER
  */
-#define GPP_CONTROLLER			CIMX_OPTION_ENABLED
+#define GPP_CONTROLLER			CIMX_OPTION_DISABLED
 
 /**
  * @def GPP_CFGMODE
@@ -225,29 +224,32 @@
  *    0  - Enable
  *    1  - Disable
  */
-#define GEC_CONFIG			0
+#define GEC_CONFIG			1
 
-static const CODECENTRY persimmon_codec_alc269[] =
+static const CODECENTRY frontrunneraf_codec_alc886[] = /* Realtek ALC886/8 */
 {
-	/* NID, PinConfig */
-	{0x12, 0x411111F0},
-	{0x14, 0x99130110},
-	{0x21, 0x0121401F},
-	{0x17, 0x411111F0},
-	{0x18, 0x01A19820},
-	{0x19, 0x411111F0},
-	{0x1A, 0x0181302F},
-	{0x1B, 0x411111F0},
-	{0x1D, 0x40069E05},
-	{0x1E, 0x411111F0},
-	{0x20, 0x0001FFFF},
+	/* NID, PinConfig (Verbs 71F..C) */
+	{0x11, 0x411111F0}, /* NPC */
+	{0x12, 0x411111F0}, /* DMIC */
+	{0x14, 0x01214110}, /* FRONT (Port-D) */
+	{0x15, 0x01011112}, /* SURR (Port-A) */
+	{0x16, 0x01016111}, /* CEN/LFE (Port-G) */
+	{0x17, 0x411111F0}, /* SIDESURR (Port-H) */
+	{0x18, 0x01A19930}, /* MIC1 (Port-B) */
+	{0x19, 0x411111F0}, /* MIC2 (Port-F) */
+	{0x1A, 0x0181313F}, /* LINE1 (Port-C) */
+	{0x1B, 0x411111F0}, /* LINE2 (Port-E) */
+	{0x1C, 0x411111F0}, /* CD-IN */
+	{0x1D, 0x40132601}, /* BEEP-IN */
+	{0x1E, 0x01441120}, /* S/PDIF-OUT */
+	{0x1F, 0x01C46140}, /* S/PDIF-IN */
 	{0xff, 0xffffffff} /* end of table */
 };
 
 static const CODECTBLLIST codec_tablelist[] =
 {
-	{0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]},
-	{0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL}
+	{0x10ec0888, (CODECENTRY*)&frontrunneraf_codec_alc886[0]},
+	{0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL}
 };
 
 /**
diff --git a/src/mainboard/lippert/frontrunner-af/romstage.c b/src/mainboard/lippert/frontrunner-af/romstage.c
index 2ed4a77d25..e5b3aeb311 100644
--- a/src/mainboard/lippert/frontrunner-af/romstage.c
+++ b/src/mainboard/lippert/frontrunner-af/romstage.c
@@ -31,7 +31,7 @@
 #include <console/loglevel.h>
 #include "agesawrapper.h"
 #include "cpu/x86/bist.h"
-#include "superio/fintek/f81865f/f81865f_early_serial.c"
+#include "superio/smsc/smscsuperio/early_serial.c"
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "drivers/pc80/i8254.c"
 #include "drivers/pc80/i8259.c"
@@ -45,7 +45,7 @@
 void disable_cache_as_ram(void); /* cache_as_ram.inc */
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
 
-#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1)
+#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -70,7 +70,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		sb_Poweron_Init();
 
 		post_code(0x31);
-		f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+		smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 		console_init();
 	}