lippert/frontrunner-af: Switch away from AGESA_LEGACY

NOTE: Some code was currently left behind that may be
required for certain type of board reboots. A followup
patch will address this.

Change-Id: I3c1258b4e4dcf6fd04f57f5ab59cb1572a7d1fa3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

1 files changed, 15 insertions, 84 deletions

diff --git a/src/mainboard/lippert/frontrunner-af/romstage.c b/src/mainboard/lippert/frontrunner-af/romstage.c
index 316daba0d0..8a54555841 100644
--- a/src/mainboard/lippert/frontrunner-af/romstage.c
+++ b/src/mainboard/lippert/frontrunner-af/romstage.c
@@ -13,94 +13,25 @@
  * GNU General Public License for more details.
  */
 
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/acpi.h>
-#include <arch/io.h>
-#include <arch/stages.h>
 #include <device/pnp_def.h>
-#include <arch/cpu.h>
-#include <cpu/x86/lapic.h>
-#include <console/console.h>
-#include <commonlib/loglevel.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/amd/car.h>
-#include <northbridge/amd/agesa/agesawrapper.h>
-#include <northbridge/amd/agesa/agesa_helper.h>
-#include <cpu/x86/bist.h>
+#include <northbridge/amd/agesa/state_machine.h>
 #include <superio/smsc/smscsuperio/smscsuperio.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/x86/cache.h>
-#include <sb_cimx.h>
-#include "SBPLATFORM.h"
-#include "cbmem.h"
-#include <cpu/amd/mtrr.h>
-#include <cpu/amd/agesa/s3_resume.h>
-
 
 #define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
 
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void board_BeforeAgesa(struct sysinfo *cb)
 {
-	u32 val;
-
-	/* Must come first to enable PCI MMCONF. */
-	amd_initmmio();
-
-	if (!cpu_init_detectedx && boot_cpu()) {
-		post_code(0x30);
-		sb_Poweron_Init();
-
-		post_code(0x31);
-		smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-		console_init();
-	}
-
-	/* Halt if there was a built in self test failure */
-	post_code(0x34);
-	report_bist_failure(bist);
-
-	/* Load MPB */
-	val = cpuid_eax(1);
-	printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
-	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
-
-	post_code(0x37);
-	agesawrapper_amdinitreset();
-
-	post_code(0x39);
-	agesawrapper_amdinitearly();
-
-	int s3resume = acpi_is_wakeup_s3();
-	if (!s3resume) {
-		post_code(0x40);
-		/* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all
-		 * hang, looks like DRAM re-init goes wrong, don't know why. */
-		val = agesawrapper_amdinitpost();
-		if (val == 7) /* fatal, amdinitenv below is going to hang */
-			outb(0x06, 0x0cf9); /* reset system harder instead */
-
-		post_code(0x42);
-		agesawrapper_amdinitenv();
-		amd_initenv();
-
-	} else { 			/* S3 detect */
-		printk(BIOS_INFO, "S3 detected\n");
-
-		post_code(0x60);
-		agesawrapper_amdinitresume();
-
-		agesawrapper_amds3laterestore();
-
-		post_code(0x61);
-		prepare_for_resume();
-	}
-
-	post_code(0x50);
-	copy_and_run();
-	printk(BIOS_ERR, "Error: copy_and_run() returned!\n");
-
-	post_code(0x54);	/* Should never see this post code. */
+	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 }
+
+#if 0
+	post_code(0x40);
+	/* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all
+	 * hang, looks like DRAM re-init goes wrong, don't know why. */
+	val = agesawrapper_amdinitpost();
+	if (val == 7) /* fatal, amdinitenv below is going to hang */
+		outb(0x06, 0x0cf9); /* reset system harder instead */
+
+	post_code(0x42);
+	agesawrapper_amdinitenv();
+#endif