LiPPERT FrontRunner-AF [2/2]: actually implement mainboard support

Step 2: change the Persimmon code to adapt it to the new board's hardware.

The FrontRunner-AF is a PC/104+ form factor embedded board:
- AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU
  - DDR3 SO-DIMM socket (1.5 or 1.35V)
  - VGA and LVDS (via Analogix ANX3110)
- AMD A55E (Hudson-E1) southbridge
  - 6x USB 2.0
  - 1x SATA, 1x CFast socket
  - HD Audio (via Realtek ALC886)
  - PCI and ISA (via ITE IT8888)
  - NEC uPD78F0532 microcontroller on I2C ("SEMA")
- Intel I210 GbE (on APU PCIe x1)
- SMSC SCH3112 SIO
  - PS/2
  - 2x RS232/485
- 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS)

http://www.adlinktech.com/PD/web/PD_detail.php?pid=1131

Change-Id: Id55f89d224ad669b351c36128b12299802b721ba
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-on: http://review.coreboot.org/2553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 14 insertions, 8 deletions

diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig
index f3f9aa964a..0cdf3657e2 100644
--- a/src/mainboard/lippert/frontrunner-af/Kconfig
+++ b/src/mainboard/lippert/frontrunner-af/Kconfig
@@ -17,7 +17,7 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 #
 
-if BOARD_AMD_PERSIMMON
+if BOARD_LIPPERT_FRONTRUNNER_AF
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
@@ -26,11 +26,15 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
 	select NORTHBRIDGE_AMD_AGESA_FAMILY14
 	select SOUTHBRIDGE_AMD_CIMX_SB800
-	select SUPERIO_FINTEK_F81865F
+	select SUPERIO_SMSC_SMSCSUPERIO
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_ACPI_RESUME
+	# S3 doesn't work yet, heapManager.c:576 failed last time I tried,
+	# couldn't figure out why.  But s3_resume.c (look for "spi_flash_probe")
+	# erases 28 KB and writes 10 KB register dumps to SPI flash on every
+	# boot, wasting 3 s and causing wear!  Therefore disable S3 for now.
+	#select HAVE_ACPI_RESUME
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
@@ -42,7 +46,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 
 config MAINBOARD_DIR
 	string
-	default amd/persimmon
+	default lippert/frontrunner-af
 
 config APIC_ID_OFFSET
 	hex
@@ -50,7 +54,7 @@ config APIC_ID_OFFSET
 
 config MAINBOARD_PART_NUMBER
 	string
-	default "Persimmon"
+	default "FrontRunner-AF"
 
 config HW_MEM_HOLE_SIZEK
 	hex
@@ -58,7 +62,8 @@ config HW_MEM_HOLE_SIZEK
 
 config MAX_CPUS
 	int
-	default 2
+	default 1 if FUSION_G_T40R
+	default 2 if FUSION_G_T56N
 
 config MAX_PHYSICAL_CPUS
 	int
@@ -111,7 +116,8 @@ config VGA_BIOS
 
 config VGA_BIOS_ID
 	string
-	default "1002,9802"
+	default "1002,9804" if FUSION_G_T40R
+	default "1002,9806" if FUSION_G_T56N
 
 config SB800_AHCI_ROM
 	bool
@@ -121,4 +127,4 @@ config DRIVERS_PS2_KEYBOARD
 	bool
 	default n
 
-endif # BOARD_AMD_PERSIMMON
+endif # BOARD_LIPPERT_FRONTRUNNER_AF