mb/lenovo: Add ThinkPad W530 support

Tested and working:
  - Wi-Fi
  - Ethernet
  - WWAN ? (interface is created in linux, didn't actually test it, should work)
  - Bluetooth
  - Speakers
  - Internal mic
  - SD card reader
  - Suspend and resume
  - Keyboard, touchpad, trackpoint
  - Fan
  - Webcam
  - 4 RAM slots
  - All USB ports
  - mSATA
  - VGA ROM (FIXME: black screen after resume from s3)
  - Native graphics initialization (FIXME: probably incorrect panel frequency, etc. in GRUB; in linux everything's fine incl. resume from s3)
  - libgfxinit
  - GRUB payload
  - SeaBIOS payload
  - Internal flashing using flashrom

Not tested yet:
  - Fingerprint reader
  - Colorimeter
  - Smart card reader
  - Docking station
  - VGA output
  - Optical disc drive
  - Discrete graphics

TODO:
  - Test BDC detection

Change-Id: Ic7918ea18712221cc62c5564caede340f71ce400
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Reviewed-on: https://review.coreboot.org/26136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

1 files changed, 0 insertions, 177 deletions

diff --git a/src/mainboard/lenovo/t530/devicetree.cb b/src/mainboard/lenovo/t530/devicetree.cb
deleted file mode 100644
index a28c177572..0000000000
--- a/src/mainboard/lenovo/t530/devicetree.cb
+++ /dev/null
@@ -1,177 +0,0 @@
-chip northbridge/intel/sandybridge
-	# IGD Displays
-	register "gfx.ndid" = "3"
-	register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
-
-	# Enable DisplayPort Hotplug with 6ms pulse
-	register "gpu_dp_d_hotplug" = "0x06"
-
-	# Enable Panel as LVDS and configure power delays
-	register "gpu_panel_port_select" = "0"			# LVDS
-	register "gpu_panel_power_cycle_delay" = "6"		# T7: 500ms
-	register "gpu_panel_power_up_delay" = "100"		# T1+T2: 10ms
-	register "gpu_panel_power_down_delay" = "100"		# T5+T6: 10ms
-	register "gpu_panel_power_backlight_on_delay" = "2000"	# T3: 200ms
-	register "gpu_panel_power_backlight_off_delay" = "2000"	# T4: 200ms
-	register "gfx.use_spread_spectrum_clock" = "1"
-	register "gfx.link_frequency_270_mhz" = "1"
-	register "gpu_cpu_backlight" = "0x1155"
-	register "gpu_pch_backlight" = "0x11551155"
-
-	device cpu_cluster 0 on
-		chip cpu/intel/socket_rPGA989
-			device lapic 0 on end
-		end
-		chip cpu/intel/model_206ax
-			# Magic APIC ID to locate this chip
-			device lapic 0xACAC off end
-
-			register "c1_acpower" = "1"	# ACPI(C1) = MWAIT(C1)
-			register "c2_acpower" = "3"	# ACPI(C2) = MWAIT(C3)
-			register "c3_acpower" = "5"	# ACPI(C3) = MWAIT(C7)
-
-			register "c1_battery" = "1"	# ACPI(C1) = MWAIT(C1)
-			register "c2_battery" = "3"	# ACPI(C2) = MWAIT(C3)
-			register "c3_battery" = "5"	# ACPI(C3) = MWAIT(C7)
-		end
-	end
-
-	register "pci_mmio_size" = "2048"
-
-	device domain 0 on
-		device pci 00.0 on end # host bridge
-		device pci 01.0 on end # PCIe Bridge for discrete graphics
-		device pci 02.0 on end # vga controller
-
-		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
-			# GPI routing
-			#  0 No effect (default)
-			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
-			#  2 SCI (if corresponding GPIO_EN bit is also set)
-			register "alt_gp_smi_en" = "0x0000"
-			register "gpi1_routing" = "2"
-			register "gpi13_routing" = "2"
-
-			# Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock)
-			register "sata_port_map" = "0x3f"
-			# Set max SATA speed to 6.0 Gb/s
-			register "sata_interface_speed_support" = "0x3"
-
-			register "gen1_dec" = "0x7c1601"
-			register "gen2_dec" = "0x0c15e1"
-			register "gen4_dec" = "0x0c06a1"
-
-			# Enable zero-based linear PCIe root port functions
-			register "pcie_port_coalesce" = "1"
-			register "c2_latency" = "101"  # c2 not supported
-			register "p_cnt_throttling_supported" = "1"
-
-			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
-
-			register "xhci_switchable_ports" = "0xf"
-			register "superspeed_capable_ports" = "0xf"
-			register "xhci_overcurrent_mapping" = "0x4000201"
-
-			register "spi_uvscc" = "0x2005"
-			register "spi_lvscc" = "0x2005"
-
-			device pci 14.0 on end # USB 3.0 Controller
-			device pci 16.0 on end # Management Engine Interface 1
-			device pci 16.1 off end # Management Engine Interface 2
-			device pci 16.2 off end # Management Engine IDE-R
-			device pci 16.3 off end # Management Engine KT
-			device pci 19.0 on end # Intel Gigabit Ethernet
-			device pci 1a.0 on end # USB2 EHCI #2
-			device pci 1b.0 on end # High Definition Audio
-			device pci 1c.0 on end # PCIe Port #1
-			device pci 1c.1 on end # PCIe Port #2
-			device pci 1c.2 on end # PCIe Port #3 (expresscard)
-			device pci 1c.3 off end # PCIe Port #4
-			device pci 1c.4 off end # PCIe Port #5
-			device pci 1c.5 off end # PCIe Port #6
-			device pci 1c.6 off end # PCIe Port #7
-			device pci 1c.7 off end # PCIe Port #8
-			device pci 1d.0 on end # USB2 EHCI #1
-			device pci 1e.0 off end # PCI bridge
-			device pci 1f.0 on #LPC bridge
-				chip ec/lenovo/pmh7
-					device pnp ff.1 on # dummy
-					end
-					register "backlight_enable" = "0x01"
-					register "dock_event_enable" = "0x01"
-				end
-
-				chip drivers/pc80/tpm
-					device pnp 0c31.0 on end
-				end
-
-				chip ec/lenovo/h8
-					device pnp ff.2 on # dummy
-						io 0x60 = 0x62
-						io 0x62 = 0x66
-						io 0x64 = 0x1600
-						io 0x66 = 0x1604
-					end
-
-					register "config0" = "0xa7"
-					register "config1" = "0x09"
-					register "config2" = "0xa0"
-					register "config3" = "0xc2"
-
-					register "has_keyboard_backlight" = "1"
-
-					register "beepmask0" = "0x00"
-					register "beepmask1" = "0x86"
-					register "has_power_management_beeps" = "0"
-					register "event2_enable" = "0xff"
-					register "event3_enable" = "0xff"
-					register "event4_enable" = "0xd0"
-					register "event5_enable" = "0xfc"
-					register "event6_enable" = "0x00"
-					register "event7_enable" = "0x01"
-					register "event8_enable" = "0x7b"
-					register "event9_enable" = "0xff"
-					register "eventa_enable" = "0x01"
-					register "eventb_enable" = "0x00"
-					register "eventc_enable" = "0xff"
-					register "eventd_enable" = "0xff"
-					register "evente_enable" = "0x0d"
-
-					register "has_bdc_detection" = "1"
-					register "bdc_gpio_num" = "54"
-					register "bdc_gpio_lvl" = "0"
-				end
-				chip drivers/lenovo/hybrid_graphics
-					device pnp ff.f on end # dummy
-
-					register "detect_gpio" = "21"
-
-					register "has_panel_hybrid_gpio" = "1"
-					register "panel_hybrid_gpio" = "52"
-					register "panel_integrated_lvl" = "1"
-
-					register "has_backlight_gpio" = "0"
-					register "has_dgpu_power_gpio" = "0"
-
-					register "has_thinker1" = "0"
-				end
-			end # LPC bridge
-			device pci 1f.2 on end # SATA Controller 1
-			device pci 1f.3 on
-			        # eeprom, 8 virtual devices, same chip
-				chip drivers/i2c/at24rf08c
-					device i2c 54 on end
-					device i2c 55 on end
-					device i2c 56 on end
-					device i2c 57 on end
-					device i2c 5c on end
-					device i2c 5d on end
-					device i2c 5e on end
-					device i2c 5f on end
-				end
-			end # SMBus
-			device pci 1f.5 off end # SATA Controller 2
-			device pci 1f.6 on end # Thermal
-		end
-	end
-end