Kconfig!

Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 257 insertions, 0 deletions

diff --git a/src/mainboard/kontron/986lcd-m/Makefile.inc b/src/mainboard/kontron/986lcd-m/Makefile.inc
new file mode 100644
index 0000000000..6a021bfca9
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/Makefile.inc
@@ -0,0 +1,77 @@
+##
+## This file is part of the coreboot project.
+## 
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+## 
+
+driver-y +=  mainboard.o
+driver-y +=  rtl8168.o
+
+#obj-y += ../../../southbridge/intel/i82801gx/i82801gx_reset.c
+obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
+obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) +=  dsdt.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) +=  acpi_tables.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) +=  fadt.o
+
+smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o
+
+# This is part of the conversion to init-obj and away from included code. 
+
+initobj-y += crt0.o
+# FIXME in $(top)/Makefile
+crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc
+crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc
+crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc
+crt0-y += ../../../../src/arch/i386/lib/id.inc
+crt0-y += ../../../../src/cpu/intel/model_6ex/cache_as_ram.inc
+crt0-y += auto.inc
+
+ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb
+ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds
+ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds
+ldscript-y += ../../../../src/arch/i386/lib/id.lds
+ldscript-y += ../../../../src/arch/i386/lib/failover.lds
+
+ifdef POST_EVALUATION
+
+MAINBOARD_OPTIONS=\
+	-DCONFIG_AP_IN_SIPI_WAIT=1 \
+	-DCONFIG_USE_PRINTK_IN_CAR=1 \
+	-DCONFIG_HAVE_HIGH_TABLES=1 \
+	-DCONFIG_MMCONF_SUPPORT=1 \
+	-DCONFIG_MMCONF_BASE_ADDRESS=0xf0000000
+
+$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+	iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+	mv dsdt.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+	$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h
+	$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S  $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@
+	perl -e 's/\.rodata/.rom.data/g' -pi $@
+	perl -e 's/\.text/.section .rom.text/g' -pi $@
+
+endif
+
diff --git a/src/mainboard/kontron/986lcd-m/devicetree.cb b/src/mainboard/kontron/986lcd-m/devicetree.cb
new file mode 100644
index 0000000000..2a3615bf5d
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/devicetree.cb
@@ -0,0 +1,132 @@
+chip northbridge/intel/i945
+
+        device apic_cluster 0 on
+                chip cpu/intel/socket_mFCPGA478
+                        device apic 0 on end
+                end
+        end
+
+        device pci_domain 0 on 
+                device pci 00.0 on end # host bridge
+		device pci 01.0 off end # i945 PCIe root port
+		chip drivers/pci/onboard
+			device pci 02.0 on end # vga controller
+			# register "rom_address" = "0xfffc0000"	# 256 KB image
+			# register "rom_address" = "0xfff80000"	# 512 KB image
+			register "rom_address" = "0xfff00000" # 1 MB image
+		end
+		device pci 02.1 on end # display controller
+
+                chip southbridge/intel/i82801gx
+			register "pirqa_routing" = "0x05"
+			register "pirqb_routing" = "0x07"
+			register "pirqc_routing" = "0x05"
+			register "pirqd_routing" = "0x07"
+			register "pirqe_routing" = "0x80"
+			register "pirqf_routing" = "0x80"
+			register "pirqg_routing" = "0x80"
+			register "pirqh_routing" = "0x06"
+
+			# GPI routing
+			#  0 No effect (default)
+			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+			#  2 SCI (if corresponding GPIO_EN bit is also set)
+			register "gpi13_routing" = "1"
+
+                        register "ide_legacy_combined" = "0x1"
+                        register "ide_enable_primary" = "0x1"
+                        register "ide_enable_secondary" = "0x1"
+                        register "sata_ahci" = "0x0"
+
+                	device pci 1b.0 on end # High Definition Audio
+                	device pci 1c.0 on end # PCIe
+                	device pci 1c.1 on end # PCIe
+                	device pci 1c.2 on end # PCIe
+			#device pci 1c.3 off end # PCIe port 4
+			#device pci 1c.4 off end # PCIe port 5
+			#device pci 1c.5 off end # PCIe port 6
+                	device pci 1d.0 on end # USB UHCI
+                	device pci 1d.1 on end # USB UHCI
+                	device pci 1d.2 on end # USB UHCI
+                	device pci 1d.3 on end # USB UHCI
+                	device pci 1d.7 on end # USB2 EHCI
+                	device pci 1e.0 on end # PCI bridge
+			#device pci 1e.2 off end # AC'97 Audio 
+			#device pci 1e.3 off end # AC'97 Modem
+                        device pci 1f.0 on # LPC bridge
+                                chip superio/winbond/w83627thg
+					device pnp 2e.0 off		# Floppy
+					end
+					device pnp 2e.1 off		# Parport
+					end
+                                        device pnp 2e.2 on
+                                                 io 0x60 = 0x3f8
+                                                irq 0x70 = 4
+                                        end
+                                        device pnp 2e.3 on
+                                                 io 0x60 = 0x2f8
+                                                irq 0x70 = 3
+						irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
+                                        end
+					device pnp 2e.5 on		# Keyboard+Mouse
+						 io 0x60 = 0x60
+						 io 0x62 = 0x64
+						irq 0x70 = 1
+						irq 0x72 = 12
+						irq 0xf0 = 0x82		# HW accel A20.
+					end
+					device pnp 2e.7 on		# GPIO1, GAME, MIDI
+						 io 0x62 = 0x330
+						irq 0x70 = 9
+					end
+					device pnp 2e.8 on		# GPIO2
+						# all default
+					end
+					device pnp 2e.9 on		# GPIO3/4
+						irq 0x30 = 0x03		# does this work?
+						irq 0xf0 = 0xfb		# set inputs/outputs
+						irq 0xf1 = 0x66
+					end
+					device pnp 2e.a off		# ACPI
+					end
+					device pnp 2e.b on		# HWM
+						 io 0x60 = 0xa00
+						irq 0x70 = 0
+					end
+
+                                end
+                                chip superio/winbond/w83627thg
+                                        device pnp 4e.0 off		# Floppy
+					end
+					device pnp 4e.1 off		# Parport
+					end
+                                        device pnp 4e.2 on		# COM3
+                                                 io 0x60 = 0x3e8
+                                                irq 0x70 = 11
+                                        end
+                                        device pnp 4e.3 on		# COM4
+                                                 io 0x60 = 0x2e8
+                                                irq 0x70 = 10
+                                        end
+					device pnp 4e.5 off		# Keyboard
+					end
+					device pnp 4e.7 off		# GPIO1, GAME, MIDI
+					end
+					device pnp 4e.8 off		# GPIO2
+					end
+					device pnp 4e.9 off		# GPIO3/4
+					end
+					device pnp 4e.a off		# ACPI
+					end
+					device pnp 4e.b off		# HWM
+					end
+                                end
+
+                        end
+			#device pci 1f.1 off end # IDE
+                        device pci 1f.2 on end  # SATA
+                        device pci 1f.3 on end  # SMBus
+			#device pci 1f.4 off end # Realtek ID Codec
+                end
+        end
+end
diff --git a/src/mainboard/kontron/Kconfig b/src/mainboard/kontron/Kconfig
new file mode 100644
index 0000000000..4a6a64fddb
--- /dev/null
+++ b/src/mainboard/kontron/Kconfig
@@ -0,0 +1,48 @@
+choice
+        prompt "Mainboard model"
+        depends on VENDOR_KONTRON
+
+config BOARD_KONTRON_986LCD_M
+        bool "986LCD-M"
+        select ARCH_X86
+        select CPU_INTEL_CORE
+	select CPU_INTEL_SOCKET_MFCPGA478
+        select NORTHBRIDGE_INTEL_I945
+        select SOUTHBRIDGE_INTEL_I82801GX
+        select SUPERIO_WINBOND_W83627THG
+        select PIRQ_TABLE
+	select MMCONF_SUPPORT
+	select USE_PRINTK_IN_CAR
+        help
+          Kontron 986LCD-M Series mainboards
+endchoice
+
+config MAINBOARD_DIR
+	string
+	default kontron/986lcd-m
+	depends on BOARD_KONTRON_986LCD_M
+
+config DCACHE_RAM_BASE
+	hex
+	default 0xffdf8000
+	depends on BOARD_KONTRON_986LCD_M
+	
+config DCACHE_RAM_SIZE
+	hex
+	default 0x8000
+	depends on BOARD_KONTRON_986LCD_M
+
+config LB_CKS_RANGE_END
+	int
+	default 122
+	depends on BOARD_KONTRON_986LCD_M
+
+config LB_CKS_LOC
+	int
+        default 123
+	depends on BOARD_KONTRON_986LCD_M
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "986LCD-M"
+	depends on BOARD_KONTRON_986LCD_M